Need some help in LiveCycle Designer ES 8.2
Hi i need help with tables in livecyckle.
Example. I create one table with 32 rows and 8 numretic cells, and another table below with 1 row and 8 numretic cells.
In the big table i can input numbers and working fine.
now to my problem. Ex, i want to input number 12 in row 1 cell 3.and then again same number 12 in row 2 cell 3 and i want the result (24) in table 2 row 1 cell 3. is there anyboby who can help me with that See below
Header 1
Header 2
Header 3
Header 4
Header 5
Header 6
Header 7
Header 8
12
3
5
12
7
9
4
Header 1
Header 2
Header 3
Header 4
Header 5
Header 6
Header 7
Header 8
4
24
10
14
Best regards Stig
Hi again Steve and thanx for the reply..send you a coupie of my file.
All text on it is in swedish so i can explain a little for you.
Text Veckodag is Weekday,Tim is hours. Frånv. is a shortname for sickness,
Dagtid is daytime Kväll is evening, Helg is weekends, Afton is Big weekend
like christmas day, s-helg is a shortname for big weekendsdays like day
after christmas day, Jour is jour. The field to the left with numbers is
date. Totalt is total
The only fields i need some help with is the field from Tim to Jour. And the
result should apear in the last fielt Totalt
Can also tell that im not so good in english but im learning. And the last
thing of all :Happy easter to you and thanxs again.
Stig in sweden My E-mail adress is [email protected]
Similar Messages
-
Need some help on Wizard design estimation
I am a newbie to swing and designing GUIs. Now I am assigned a work to design and write the code for a wizard which is a little complex. As far as my estimation goes, i think it will have atleast 20 screens that it can go through (overall). I have to make all the decision makings and stuffs related to that wizard. That's no problem, but I am asked to give estimation for the amount of time I am gonna take to finish this (in days, I work for 8 hours a day).
Well, before I need any help from the techinical point of view, I need a help on this estimation thing. Any one out there must have desinged a wizard and will know the effort and time they took when they designed it for the first time. So, friends, bcos I don't have an experience before, I am unable to estimate. If anyone of you have done it before, please tell me how long I may take to finish it. Remember, I am a newbie to both swing as well as Wizards.
Thank you and I hope I am gonna need a lot of help when i start doing it.
Srikanth.Well design is one thing you must keep in consideration, however, what about Testing? Are you going to use the MVC to make the Wizard?
Do you know if you have to handle in a 100% working Wizard / Application? In that case then you will have to test your application very hard. If using the MVC, then you could also have to write some JUnit testing for the Control Classes. UI interfacing in Java may be a hassel, but if you are into some simple and want to do it fast then I sugest using some 3rd party tool like JDeveloper. However do not try to use any layouts, just fix position everything, otherwise just try to code it yourself using any tool, even TextPad.
Is this a one man project? When someone asks me for estimates I try to think of worse case scenario! When developing anything, something will always go wrong, and thus in your plan you must always put some time were you handle this problem.
When doing your estimates do not worry calling this time "Bug Fixing", "Recovery Time", since that would mean you have experiance and that you know how a project must be handled.
Also, are you going to just start programming this thing, or (BETTER) you are gona plan it first? Planning takes time. (Remember the Waterfall aproach, and the other models). Planning, even if for just a couple of days would be quite better since you would not finnish to change code 5 days before dead line.
Do you have to document thos Wizard when you are ready, User Documentation / Technical Documentation, and so on? That also takes time to make.
In the end it all depends what kind of management you have. If you work in a small comapany which just demands quantity and not quaility then do not listin to all the bull sh*t I wrote above, and just give the smallest ammount you can. Otherwise ask, and check what they are expecting, then you can give a proper deadline. -
I need some help in BEx Design Tools..
Hi,
Can you people help me in finding some notes about BEx Design Tools [Analytical Engine, BEx Query Designer, BEx Report Designer, BEx WAD, Query Definition]
Is it possible to find some practise test questions for SAP BI certification Exam.
Cheers
Amar.Hi
Check: [BI Suite: Business Explorer |http://help.sap.com/saphelp_nw70/helpdata/EN/ba/45583ca544eb51e10000000a114084/frameset.htm]
[BW Material|http://sapbwneelam.blogspot.com/2008/10/bw-material.html]
Srini -
Need some help with this Design. Not sure if it can be done.
I am a full time RVer. I have a complex system installed in my RV. I am trying to share a wireless or use my AE to feed internet to the devices in my rack and allow my Apple TV to connect to my MBP over gigabit for streaming reasons.
Is there a way to share my internet to the AE so that it will feed the 3 ports? Can I somehow connect to a hotspot and share that internet connection to the other devices on my network wired and wireless?? I am mainly concerned with getting internet to the ATV while connected to it via ethernet for the gigabit connection.
It seems that I can connect the AE to a hotspot or WAP, but then I loose the ability to turn bridged mode off so that it will hand out DHCP ip addresses to the ethernet devices. I cannot extend any network unless the hotspot is using an apple device for its WAP. This is what apple told me when I was trying to extend my Linksys WAP4400N.
Any ideas or advice here would be great. I am just stuck for a solution to what I want to accomplish.
ThanksOne possible solution....(if I understand correctly what you're trying to accomplish with what you have to work with) I'm assuming that the Linksys has no internet connection in the RV and isn't really needed in my idea below.....or do you have a satellite connection (or some other internet source besides a public wireless network?
You could have your MBP join the wireless network, set up internet sharing (see OS X help) and share from airport to ethernet, connect an ethernet cable from MBP to WAN port on the Extreme, set the Extreme's connection sharing to "share a public IP", ignore the double NAT error (or you may be able to bridge it, I can't remember if the MBP will hand out several IPs but I think it will), and plug your Apple TV into a LAN port on the Extreme. Come to think about it, you really don't even need the Extreme unless you need other clients to connect, just plug the Apple TV into the MBP.
hope it helps -
Need some help & suggestions in designing Crystal Report
I need to arrange my data in the following manner:
I need to group my data by a field and need to show multiple information for that record at the same row level and then include some crosstab information. I realized that I cannot have multiple information at the same row level for a group.
As an example, please consider that the group field is Name and A and B are two records returned based on the grouping field. I also need to show 'Description' and a color coded box for that record.
And then I need to show the cross tab data for that group.
I need a table something like what is shown below:
X Y Z
A.Name A.Desc A.ColorCodeBox Var1 0 1 2
Var2 2 3 4
Var3 2 4 4
B.Name B.Desc B.ColorCodeBox Var1 0 1 2
Var2 2 3 4
Var3 2 4 4
Where the numbers are some values and X,Y,Z are the column headings and the numbers are some values.
Could you please provide some suggestions as to how this can be achieved? I am using the default Crystal Reports that ships with Visual Studio 2008 Prof. But if there is some other feature available with any other version, we can consider switching to it.
Thanks in advance.Here is how my table is laid out.
col-1 col-2 col-3 col-4 col-5 col-6
field-a field-b field-c r1 11111 22222 33333
r2 44444 55555 66666
r3 77777 88888 99999
As you had mentioned, I am creating two group headers in my group section where the first group header contains the following and overlays the second group header.
col-1 col-2 col-3
field-a field-b field-c
And the second group header contains the cross tab information.
col-4 col-5 col-6
r1 11111 22222 33333
r2 44444 55555 66666
r3 77777 88888 99999
And I suppressed the column headings (col-X) from both the groups using the formula that you mentioned. But here is how my table is being laid out
col-1 col-2 col-3 col-1 col-2 col-3
field-a field-b field-c r1 11111 22222 33333
r2 44444 55555 66666
r3 77777 88888 99999
<- blank line
field-a field-b field-c r1 11111 22222 33333
r2 44444 55555 66666
r3 77777 88888 99999
I have already done a fit section and made sure there is no space. Also my crosstab table contains string fields and I am suppressing the row and column totals in the crosstab as I do not need them.
Do let me know if you have any ideas on this. -
I need some help with the GUI design.
Have you tried the line inputs on the back of your FirePod? If you update its firmware (not sure if you will need to or not), I seem to remember hearing that the FirePod can run without FW connection, i.e. stand alone. In this mode with the outs from your mixer into line ins 1-2 (2nd from left on the back) it should work fine. I say should because I have never tried. However, these are used for returns from an external effects unit. I assume here, and the important word is assume, that there are two so that they can be used as a stereo send or as a mono send. Worth a try! Let us know how it goes.
Best, Fred -
Need some help in creating Search Help for standard screen/field
I need some help in adding a search-help to a standard screen-field.
Transaction Code - PP01,
Plan Version - Current Plan (PLVAR = '01'),
Object Type - Position ( OTYPE = 'S'),
Click on Infotype Name - Object ( Infotype 1000) and Create.
I need to add search help to fields Object Abbr (P1000-SHORT) / Object Name (P1000-STEXT).
I want to create one custom table with fields, Position Abb, Position Name, Job. Position Abb should be Primary Key. And when object type is Position (S), I should be able to press F4 for Object Abb/Object Name fields and should return Position Abbr and Position Name.
I specify again, I have to add a new search help to standard screen/field and not to enhance it.
This is HR specific transaction. If someone has done similar thing with some other transation, please let me know.
There is no existing search help for these fields. If sm1 ever tried or has an idea how to add new search help to a standard screen/field.
It's urgent.
Thanks in advace. Suitable answers will be rewardedHi Pradeep,
Please have a look into the below site which might be useful
Enhancing a Standard Search Help
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/daeda0d7-0701-0010-8caa-
edc983384237
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ee93446011d189700000e8322d00/frameset.htm
A search help exit is a function module for making the input help process described by the search help more flexible than possible with the standard version.
This function module must have the same interface as function module F4IF_SHLP_EXIT_EXAMPLE. The search help exit may also have further optional parameters (in particular any EXPORTING parameters).
A search help exit is called at certain timepoints in the input help process.
Note: The source text and long documentation of the above-specified function module (including the long documentation about the parameters) contain information about using search help exits.
Function modules are provided in the function library for operations that are frequently executed in search help exits. The names of these function modules begin with the prefix F4UT_. These function modules can either be used directly as search help exits or used within other search help exits. You can find precise instructions for use in the long documentation for the corresponding function module.
During the input help process, a number of timepoints are defined that each define the beginning of an important operation of the input help process.
If the input help process is defined with a search help having a search help exit, this search help exit is called at each of these timepoints. If required, the search help exit can also influence the process and even determine that the process should be continued at a different timepoint.
timepoints
The following timepoints are defined:
1. SELONE
Call before selecting an elementary search help. The possible elementary search helps are already in SHLP_TAB. This timepoint can be used in a search help exit of a collective search help to restrict the selection possibilities for the elementary search helps.
Entries that are deleted from SHLP_TAB in this step are not offered in the elementary search help selection. If there is only one entry remaining in SHLP_TAB, the dialog box for selecting elementary search helps is skipped. You may not change the next timepoint.
The timepoint is not accessed again if another elementary search help is to be selected during the dialog.
2. PRESEL1
After selecting an elementary search help. Table INTERFACE has not yet been copied to table SELOPT at this timepoint in the definition of the search help (type SHLP_DESCR_T). This means that you can still influence the attachment of the search help to the screen here. (Table INTERFACE contains the information about how the search help parameters are related to the screen fields).
3. PRESEL
Before sending the dialog box for restricting values. This timepoint is suitable for predefining the value restriction or for completely suppressing or copying the dialog.
4. SELECT
Before selecting the values. If you do not want the default selection, you should copy this timepoint with a search help exit. DISP should be set as the next timepoint.
5. DISP
Before displaying the hit list. This timepoint is suitable for restricting the values to be displayed, e.g. depending on authorizations.
6. RETURN (usually as return value for the next timepoint)
The RETURN timepoint should be returned as the next step if a single hit was selected in a search help exit.
It can make sense to change the F4 flow at this timepoint if control of the process sequence of the Transaction should depend on the selected value (typical example: setting SET/GET parameters). However, you should note that the process will then depend on whether a value was entered manually or with an input help.
7. RETTOP
You only go to this timepoint if the input help is controlled by a collective search help. It directly follows the timepoint RETURN. The search help exit of the collective search help, however, is called at timepoint RETTOP.
8. EXIT (only for return as next timepoint)
The EXIT timepoint should be returned as the next step if the user had the opportunity to terminate the dialog within the search help exit.
9. CREATE
The CREATE timepoint is only accessed if the user selects the function "Create new values". This function is only available if field CUSTTAB of the control string CALLCONTROL was given a value not equal to SPACE earlier on.
The name of the (customizing) table to be maintained is normally entered there. The next step returned after CREATE should be SELECT so that the newly entered value can be selected and then displayed.
10. APP1, APP2, APP3
If further pushbuttons are introduced in the hit list with function module F4UT_LIST_EXIT, these timepoints are introduced. They are accessed when the user presses the corresponding pushbutton.
Note: If the F4 help is controlled by a collective search help, the search help exit of the collective search help is called at timepoints SELONE and RETTOP. (RETTOP only if the user selects a value.) At all other timepoints the search help exit of the selected elementary search help is called.
If the F4 help is controlled by an elementary search help, timepoint RETTOP is not executed. The search help exit of the elementary search help is called at timepoint SELONE (at the
F4IF_SHLP_EXIT_EXAMPLE
This module has been created as an example for the interface and design of Search help exits in Search help.
All the interface parameters defined here are mandatory for a function module to be used as a search help exit, because the calling program does not know which parameters are actually used internally.
A search help exit is called repeatedly in connection with several
events during the F4 process. The relevant step of the process is passed on in the CALLCONTROL step. If the module is intended to perform only a few modifications before the step, CALLCONTROL-STEP should remain unchanged.
However, if the step is performed completely by the module, the following step must be returned in CALLCONTROL-STEP.
The module must react with an immediate EXIT to all steps that it does not know or does not want to handle.
Hope this info will help you.
***Reward points if found useful
Regards,
Naresh -
Need some help with a remove function
Design and code a program that will maintain a list of product names. Use a String type to represent the product name and an array of strings to implement the list. Your program must implement the following methods:
Add a product to the list
Remove a product from the list
Display then entire list
Find out if a particular product is on the list.
You need to create a command command loop with a menu() function. The program must continue asking for input until the user stops.
This is the assignment and this is what I have so far. I need some help writing the remove function.
Thanks
* Title: SimpleSearchableList.java
* Description: this example will show a reasonably efficient and
* simple algorithm for rearranging the value in an array
* in ascending order.
public class SimpleSearchableList {
private static String[] List = new String[25]; //These variables (field variables)
private static int Size; //are common to the entire class, but unavailable
//except to the methods of the class...
public static void main(String[] args)
String Cmd;
for(;;) {
Menu();
System.out.print("Command: ");
Cmd = SimpleIO.inputString();
if(Cmd.equals("Quit"))
break;
else if(Cmd.equals("Fill"))
FillList();
else if(Cmd.equals("Search"))
SearchList();
else if(Cmd.equals("Show"))
ShowList();
else if(Cmd.equals("Remove"))
Remove();
//Tells you what you can do...
public static void Menu()
System.out.println("Choices..................................");
System.out.println("\tFill to Enter Product");
System.out.println("\tShow to Show Products");
System.out.println("\tSearch to Search for Product");
System.out.println("\tRemove a Product");
System.out.println("\tQuit");
System.out.println(".........................................");
//This method will allow the user to fill an array with values...
public static void FillList()
int Count;
System.out.println("Type Stop to Stop");
for(Count = 0 ; Count < List.length ; Count++)
System.out.print("Enter Product: ");
List[Count] = SimpleIO.inputString();
if(List[Count].equals("Stop"))
break;
Size = Count;
//This method will rearrange the values in the array so that
// go from smallest to largest (ascending) order...
public static void SearchList()
String KeyValue;
boolean NotFoundFlag;
int Z;
System.out.println("Enter Product Names Below, Stop To Quit");
while(true)
System.out.print("Enter: ");
KeyValue = SimpleIO.inputString();
if(KeyValue.equals("Stop")) //Note the use of a method for testing
break; // for equality...
NotFoundFlag = true; //We'll assume the negative
for(Z = 0 ; Z < Size ; Z++)
if(List[Z].equals(KeyValue)) {
NotFoundFlag = false; //If we fine the name, we'll reset the flag
System.out.println(List[Z] + " was found");
if(NotFoundFlag)
System.out.println(KeyValue + " was not found");
//This method will display the contents of the array...
public static void ShowList()
int Z;
for(Z = 0 ; Z < Size ; Z++)
System.out.println("Product " + (Z+1) + " = " + List[Z]);
public static void Remove()
}I need help removing a product from the arrayYes. So what's your problem?
"Doctor, I need help."
"What's wrong?"
"I need help!"
Great.
By the way, you can't remove anything from an array. You'll have to copy the remaining stuff into a new one, or maybe maintain a list of "empty" slots. Or null the slots and handle that. The first way will be the easiest though. -
Need some help with social net site
I need to create a site with editable user profiles, the site
will feature sports stats that the user can update.
I use Dreamweaver and MYSQL but I need some direction. Im
starting from scratch here, are there any templates or free source
code to go off of? I really need some help!!"Funks Da Burn" <[email protected]> wrote in
message
news:g1np74$eej$[email protected]..
>I need to create a site with editable user profiles, the
site will feature
> sports stats that the user can update.
> I use Dreamweaver and MYSQL but I need some direction.
Im starting from
> scratch here, are there any templates or free source
code to go off of? I
> really need some help!!
That's not something you can do using templates or by
dropping in a free
script; it's pretty complicated. You need to know how to
design a database
and write server-side code. Dreamweaver will help you write
the code, but
you still need to plan and design the whole application. I'd
recommend
starting with a book. It sounds like PHP is going to be your
best bet - does
your host server support it? If so, do a search on Amazon.com
for books on
Dreamweaver and PHP, and/or ask for recommendations here.
Patty Ayers | www.WebDevBiz.com
Free Articles on the Business of Web Development
Web Design Contract, Estimate Request Form, Estimate
Worksheet -
Need some help after inserting CMS system
Hi on my site ive inserted an CMS system from Cushy. It all work that isnt the problem. The problem is that my page is a mess now.. The only thing ive addes is a cms code so im hoping the solution isnt hard to do.
There are three pages that are complete changed.
The home page
http://www.vakantiewoningeninsuriname.nl/index.html
The text colomn right under is moved.How can i place this back?
on http://www.dorff.nl/ you can see how it was before i add the CMS.
The next page is:
http://www.vakantiewoningeninsuriname.nl/bezienswaardighedenparamaribo.html
You can see there is a lot extra space between the head and the text. And you see that the text is not only at the right side anymmore.
This is how it should be:
http://www.dorff.nl/bezienswaardighedenparamaribo.html
The same goes for this page:
http://www.vakantiewoningeninsuriname.nl/prijzen.html
And this is how it have to be:
http://www.dorff.nl/prijzen.html
Hope you can help, thank you for looking..
Regards BrianDear Nancy,
Thank you for your response,
I will try to explain again what is wrong. On my site you see this page:
http://www.vakantiewoningeninsuriname.nl/prijzen.html
Problem is that the picture below is on the right side of the page instead of the left like the other pictures.
On:
http://www.dorff.nl/prijzen.html
You can see how it should looks.. Pictures to the left and text on the right. Dont know what happened when im adding the Cuschy CMS. Hope you can see what is wrong.
Regards Brian
Date: Wed, 2 May 2012 13:04:14 -0600
From: [email protected]
To: [email protected]
Subject: Need some help after inserting CMS system
Re: Need some help after inserting CMS system
created by Nancy O. in Dreamweaver - View the full discussion
Change this:
Prijzen
Bij ons kunt u terecht met elk budget. Wij hebben woningen voor mensen die een langere tijd blijven maar ook voor vakantiegangers. Daarom hebben wij verschillende prijzen gehanteerd.
to this: <!Begin CushyCMS>
h2. Prijzen
Bij ons kunt u terecht met elk budget. Wij hebben woningen voor mensen die een langere tijd blijven maar ook voor vakantiegangers. Daarom hebben wij verschillende prijzen gehanteerd.
<!end CushyCMS> Nancy O.Alt-Web Design & PublishingWeb | Graphics | Print | Media Specialists http://alt-web.com/http://twitter.com/altweb http://alt-web.blogspot.com/
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4374962#4374962
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4374962#4374962. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Dreamweaver by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746. -
Please i need some help time capsule and airport express wireless extender
hello everyone and thank you for looking at my post. i do need some help. i am not very good at the computer programing so i might not use the right terms. i have a time capsule that i just replaced an old pc type router with. i have a fairly large house and can not get wireless signal to the one end of my house. so i went to the apple store and bought an airport express after being told how its just plug and play and itll setup with my time capsule and waala iv just extended my wireless signal. well it did not seam to work that well for me. i have done all the setting up that was told me to in the book to do and i still have get to get a wireless signal out of the express i then hooked up an ethernet wire from the express to my girlfriends macbook. and what do you know now im seeing the express in my airport utility. but then i unplug the ethernet and im back to not seeing the express. what am i doing wrong and what do i need to do. please help me if you can. thanks alot.
Hello fastuca. Welcome to the Apple Discussions!
Let's double-check your base stations' settings ...
o If practical, place the base stations in near proximity to each other during the setup phase. Once done, move them to their desired locations.
o Open AirPort Utility and select the Time Capsule (TC).
o Choose Manual Setup from the Base Station menu, or double-click the base station to open the configuration in a separate window. Enter the base station password if necessary.
o Click AirPort in the toolbar, and then click Wireless.
o Choose “Create a wireless network” from the Wireless Mode pop-up menu, and then select the “Allow this network to be extended” checkbox.
o Next, select the 802.11n AirPort Express Base Station (AXn) that will extend this network, and choose Manual Setup from the Base Station menu, or double-click the base station to open its configuration in a separate window. Enter the base station password if necessary.
o Choose “Extend a wireless network” from the Wireless Mode pop-up menu, and then choose the network you want to extend from the Network Name pop-up menu.
o Enter the base station network and base station password is necessary.
o Click Update to update the base station with new network settings.
(ref: Page 46 of "Designing AirPort Networks Using AirPort Utility) -
Need some help learning cue points, etc
I need some help with a Flash project I'm working on. If any
Flash junkies out there are up for sitting down with me through
email or IM and helping me get to the point where I have a template
FLA doing what I want to do, I'd be willing to pay you. It wouldn't
be much, but it would be something. Here's what I'm trying to do:
I need to create an interactive talking-head style flash
presentation with a number of progressive download externally
linked FLV files, playing in succession, supported by movie-clip
text animations and supporting graphics which are triggered by cue
points in the video. I also need a simple navigation menu linking
to the FLV files. I've got some of this down already, namely, I've
laid the FLVs in and they are playing in succession. I'm stuck on
the cue point part. At this point I really just need some hands-on
help. I've bought books, I've scoured the web.
I'm easy to communicate with, and I'm good with computers and
comfortable in many multimedia design programs. Flash is very
powerful, but tougher to learn than I expected, and I'm at the end
of my rope =PMy advice... start with a very simple "proof of concept" project before you attempt the entire package.
It will be much easier to scale up if you first have a very good understanding of what's going on.
So one simple video with just one cuepoint and only one button and additional display. You'll also have to work out the interaction of pausing the video when a cuepoint is reached or button pushed to display the graph, giving the viewer time to read the graph... then when the viewer closes the graph, the video should "resume".
Start very simple and build on that only after you understand the fundamentals.
Second, you mention "video reports"... plural. So that most likely means that you will need a video player with a "playlist".
This may mean that you'll need to learn to use a little .xml to bring in the playlist data. You may also find xml an excellant way to bring other data into you project.
At the link listed above there is an excellant tutorial on "Integrating Flash and XML"
"Flash and XML"
"XML Video Playlist"
"ActionScript 3 XML Basics"
"ActionScript 3 Advanced XML"
Personally I would not even begin a project like this without considering how I could use xml to feed data into the project.
Here's an example of a video player I created that has a playlist, thumbnails, categories, transcipts, "Now Playing" etc. All that data comes into the main .swf via various xml files. Super good way in input data into Flash.
http://www.drheimer.com/video/
Yours is a rather ambitious project and will take awhile to gain the skill and assemble the pieces. So when you come to a new part... first create a real simple "proof of concept" model so you can learn how that section works. Don't expect to be able to assemble the entire project all at once.
Best wishes,
Adninjastrator -
I Need Some Help With My Dreamweaver
Hello, there i need some help with my dreamweaver i already made a forum about this but that one i maded didnt make sense soo i will make it more details in it soo i will tell you what i did i tell you what i downloed and all that just now but i tell you the things what it does i downloaded Adobe Design and Web Premium CS6 its a 30 day trial then and now i will tell you the details look below please
Details
Soo i opened my start menu then went on all programs then clicked on Adobe Design and Web Premium CS6 then i clicked on the dreamweaver CS6 then when i clicked on it i heard my computer shut down then it shuted down when i opened it straight away then it turns it self back on
What did i do about this when it happened?
I made a question so please can telll me what to do or what ever
Why did i download it?
i downloaded it because i am making a website and i want to use dreamweaver CS6 because i use notepad++ i do not like the notepad++ its harder and dreamweaver helps a bit i think because i watched a video of it
What if you dont have an answer?
Well, i will be very angry because i am making a good website its gonna be my frist publish website ever i made 20 websites but i never published them i deleted them because i wiped my computer
What kind of Computer Do You have?
System:
Micfosoft windows xp
Media Center Edition
Version 2002
Service Pack 2
Computer
ei-system
intel(R)
pentium(R) 4 CPU 3.20ghz
3.20 ghz, 960 MB of RAM
Btw i am using dreamweaver CS6 if you fogot and dont say add more details because there is alot off details there and if you help me i will show u the whloe code when i am done but leave ur emaill address below
(C) Connor McIntoshNo.
Service Pack 3 just updates your OS. All of your files, folders and programs will still be there.
You will start running into more problems like this the longer you stick with XP though. That particular OS is over 11 years old, service pack 3 hs been out for over 4 years.
It may be time for a system upgrade. I personally went from XP to Windows 7 and I haven't looked back one bit. -
Remote App on iPad connects but drops after about 20 mins. Need to turn off wait about 1 minute, then turn on wifi on iMac before it can reconnect. Need some help please.
Already gone through troubleshooting guide a zillion times. Thanks.This worked for me... A little time consuming but once you get rolling it goes GREAT... Thanks....
I got my artwork and saved it to my Desktop
Opened up Microsoft Paint and clicked on "File" and "Open" and found it to get it on the screen to resize it
Clicked "resize" and a box for changing it opened up
Checked the box "Pixels" and "Unchecked maintain aspect ratio"
Set Horizontal for 640 and Vertical for 480
Clicked on "OK" and went back to "File" and did a "Save As" and chose JPEG Picture
It came up "File Already Existed" and clicked "OK" (really did not care about the original artwork I found because wrong size)
Went to iTunes and on the movie right clicked on "Get Info", clicked on "Details", then "Artwork"
Go to the little box on the top left that shows your old artwork and click on it to get the little blue border to appear around it and hit "Delete" to make it gone
Click on "Add Artwork" and find it where you put the one from above on your Desktop and hit "Open" and OK and your new artwork is now there and all good.
Sounds like a lot of steps to follow but after around 5 or so you will fly through it. This worked perfect on my iPhone 6 Plus and I have artwork on my Home Videos now. -
TS1702 I need some help the apps were downloading slowly
The apps downloaded but it didn't cause it's stuck in downloading mode what should I do?
The iOS 6 update didn't work.
Please I need some help.
The apps didn't download.
Talking Angela and Ginger didn't download.
Talking Santa didn't update.Try moving the existing backup file to a safe location so that iTunes has to create an entire new file. The backup file is located here. You can delete that backup once you get a successfull backup.
iTunes places the backup files in the following places:
Mac: ~/Library/Application Support/MobileSync/Backup/
Windows XP: \Documents and Settings\(username)\Application Data\Apple Computer\MobileSync\Backup\
Windows Vista and Windows 7: \Users\(username)\AppData\Roaming\Apple Computer\MobileSync\Backup\
Note: If you do not see the AppData or Application Data folders, you may need to show hidden files (Windows XP, Windows Vista and Windows 7), or iTunes may not be installed in the default location. Show hidden files and then search the hard drive for the Backup directory.
Maybe you are looking for
-
Complete flex 3 to 4 migration guide?
I have a moderately large AIR project developed in flex 3. I tried to migrate to flash builder 4 (import the project folder) and got tons of errors. Besides, it seems fb4 doesn't recognize my project is an AIR project. I wonder if the flex team can p
-
Photo Gallery module - photo removal
Gday BC users I have setup a Photo Gallery via the standard photo gallery module. I haven't found a method via the BC interface to remove an item. I did it via FTP, but am wondering, is FTP the only way available? as this doesn't really help my clien
-
Can one use the iphone with car stereo systems as one does an ipod?
My car has a "jack" for mpegs/ipod to interlace with the existing stereo. Is there an accessory that will allow me to use my iphone as one would an ipod with such systems?
-
Does not work (does not synchronize photos) iCloud Photo Library on all devices
hi there. Help, please. between my iphone and ipad are not synced photos. iCloud Photo Library is enabled on both devices. lit bar showing the download and srarzu goes out. music library on your PC will not boot. thank you in advance for your help (i
-
I was just using my Pre, I set it down for a few minutes to play Bioshock 2, and when I came back to try and reply to a text, my phone was off, won't turn back on. I've plugged it in, held the power button for a minute, and taken out and put the batt