Need Some Help in Using Log4j for logging

Hi
I am using Log4j for logging in my application . i have problem some areas .
I want to rotate my file on basis of Time. means if my log file name format is HH:MM then after every minute new log file should be created , i am using Size based rotation its working fine.
Plz Tell me which propety i used to set my logfile name like DATeFormat
i tried with this Property but failed
log4j.appender.R.File=%d{HH:MM}
Simlarly i dont want to bound BackupSize
log4j.appender.R.MaxBackupIndex=1000
i want that suppose after 2 Mb automatically start new file and there is no upper bound on that
how can i do that or from where i can see all properties of Log4j Thanks

Thanks
But in this case i cannot do Size based rotation
These properties not belong to DialyRolling.. class
log4j.appender.R.MaxFileSize=1KB
log4j.appender.R.MaxBackupIndex=1000
what i want is if file size grow with in one minute i create new file using RollingFileApender and if size doesnt grow in one minute and minute cross then next minute file should be created , how can i acheive both of these

Similar Messages

Hi, can anyone help me out with this, I need some help on designing GUI for e-learning coursewares. Some tutorials or some helpful sites will do.

I need some help with the GUI design.

Have you tried the line inputs on the back of your FirePod? If you update its firmware (not sure if you will need to or not), I seem to remember hearing that the FirePod can run without FW connection, i.e. stand alone. In this mode with the outs from your mixer into line ins 1-2 (2nd from left on the back) it should work fine. I say should because I have never tried. However, these are used for returns from an external effects unit. I assume here, and the important word is assume, that there are two so that they can be used as a stereo send or as a mono send. Worth a try! Let us know how it goes.
Best, Fred

Need some help in ARCHITECTURE level for upgrading SAP BW 3.5 to SAP BI 7.0

HI all,
I am a consultant in a small company, i am curently handling upgradation project i need some help in ARCHITECTURING this complete project, please share me your knowledge, like process flows what information i need to get from clients before starting the project, what is pre upgradation checks, post upgradation cheks ...............
Thanks in advance.............

Hi,
You need to confirm the downtime during the upgrade activity.
Check for Space and resource allocation.
http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/8d1a0a3a-0b01-0010-eb82-99c4584c6db3
https://wiki.sdn.sap.com/wiki/display/BI/UpgradefromBW3.XtoBI7.0+%28SP13%29
https://wiki.sdn.sap.com/wiki/display/BI/Migrationof3.xobjectstoBI7.0
You need to make sure some OSS notes should be applied, check the below link for the same:
https://wiki.sdn.sap.com/wiki/display/BI/UpgradetoNetWeaverBI7.0%28SAPNotes+%29
http://wiki.sdn.sap.com/wiki/display/BI/BIUpgradation-HelpfulOSSnotesfromEDWperspective
Hope this helps...
Rgs,
Ravikanth.

Help request - Could need some help with a logo for my site

Hi I'm working on a project and i have come across a huge problem.
please check out my logo on this site:
http://www.tuxxen.com
I have no idea how i should make my logo and it seems like i have no skills to make one either, i have been trying for days to make one that look decent but it end up looking really really bad each time.
Could really need some help to get a nice logo up, the site im working on is about fishing, the name of this site will be changed to: Absolut mete. So the logo need to have this name.
I have managed to make the layout for my site but i cannot make a logo its a bit funny really but yeah...
Any help are very much welcome!

THANK YOU/___sbsstatic___/migration-images/migration-img-not-avail.png so the tolerance makes it not care so much about the gradations in color? what else is tolerence good for?
I have a cleaner copy now after someone suggested GIMP, so played with it last night - though couldn't figure out transparency - that was clear on converter- just not cooperative till these wonderful directions.
So now I know how to do it without messing with the pic, and with messing with it - both good lessons and got a bit brighter color out of the deal.
many thanks for the straightforward and clear directions, they worked perfectly/___sbsstatic___/migration-images/migration-img-not-avail.png extra strars for you/___sbsstatic___/migration-images/migration-img-not-avail.png

Need some Help, Credit Rating effected for what I think is wrong?

Hi All Been a wacther on here for last 12 months or so and in July of last year I purchased my first new home. Credit was around 700, In doing so with furnishing a new home etc I for sure went overboard and got alot more credit cards than i should have. Now its not an issue that i cant "pay" them, i always pay everything on time, and more than min. But i am in a place now that has my Credit Balances close to limit and my only goal is to get rid of all my credit card debt over the next 12-24 months.. Lets say $30,000 total. My concern is that my credit score is now around 625. My problem with this is, it shows as the first reason why "SERIOUS DELINQUENCY" i can tell you without a doubt in the past 6-8Years I have not missed a single payment, on anything, ever... Back in college i had one captial one card and yes i did "settle to pay" at some point but that was SO long ago.. I did have verizon cable bill from when i moved and they couldnt forward my mail and ended up paying that $125 last year prior to buying my house, but that was all just a mistake as i thought i was paid in full, is this what is making the SERS DELN? wonder if Verizon would be able to remove it since i paud it a year ago? Not even sure thats it? Can anyone please advise on what I should do about this?? and I mean just this, I well know that i have to pay my CC debt off 100%, and I will.. Im looking for help on why it reflects SERIOUS DEL> when i know i dont have any?? TY ALL

that is true but if i didnt have a dvd or dvd buner to hand i would still be able to tranfer files etc. and i would still have the mp3s at home so i wouldnt mind losing them temp. plus if there was a dock i could have dropped it in that :P
ok i take your point about you would have no room for music. however the real question is why do you have to have a fixed removable dri've? as i said i am using the MTP firmware so i dont have a partition i just mix files and music. this way i should be able to have a 4.7GB file and 300meg of music or 2.5GB of files and 2.5GB of music. why should it be 2.5GB of music but with a setting of 4GB for the dri've and thus GB of music thus not being able to use the other .5GB for music?
as someone said ipods do pump out track data etc through the bottom port so you get all your info on you car stereo. the only way i see it happening on the zen is if creative make the USB a I^2C port during playback but this is prob not possible and very unlikely given current firmware releases.
dont get me wrong, i picked my zen over an ipod, looks better, has mic, has 5GB storage etc but it just doesnt make the most of its self and im not sure if it even will due to bad design which almost seems like 'apple have put there port on the bottom, lets put ours at the top, yeah that will make us better than apple'.

Need some help with button JavaScript for Save As event.

Hi,
I'm using Adobe Acrobat X Pro and am completely new to scripting forms in Adobe (completely new to Adobe Acrobat as well!). On a form there is a save button that opens the Save As dialog by using a trigger (Mouse Up) and action (Execute a menu item - File>Save As...>PDF...) and this works fine, however, I want to now use javascript to modify this button's behavior so that is uses a trigger (Mouse Up) and action (Run a JavaScript), and I want that JavaScript to combine the text values from two form fields (a location Dropdown and a date Text field) and use this concateneated string + ".pdf" as the filename when it opens the Save As dialog. Make sense?
This is what I have added to the button as a JavaScript so far I am using a test string at the moment ("NewFile.pdf") and will add the concatenated string to the script after I know the script is working as it should.
var newFileName = "NewFile.pdf";
var pathArray = this.path.split("/");
pathArray.pop();
pathArray.push(newFileName);
this.saveAs(pathArray.join("/"));
Two issues so far:
1. When I click the button nothing happens, no Save As dialog or anything.
2.When I check the button properties under the Actions tab the Select Action property shows "Execute a menu item" even though I previously selected "Execute a JavaScript"
Thanks for any help!

Thanks guys, I appreciate the response! If I can bypass the Save As dialog and save the file to a default location using a file name that is contructed from two form field values then that would be perfect. I definitely think it is feasible to have a script file installed locally on each users workstation. I don't quite understand about folder-level security, etc. yet but am eager to learn how to do this stuff if you can give me gentle push in the right direction! Thanks!

Need some help building a game for a school project

I have to build a game called quads.
My java knowledge is not the best there is, so i'm looking for some existing code i could use for my game.
Here are some game details.
- The game is played by 2 players (on the same computer).
- both players have 18 square stones.
- the stones are divided in 4 sides,
- each side can be shaped, with horizontal- or vertical lines, gray, or black
- http://213.73.158.54/plaatjes/stones.htm for some preview images
- player1 has only gray stones, player2 only black.
- both players have 1 white stone, wich they have to use first.
- the game is over when one of the players can no longer place one of his stones on the board.
What i'm looking for,
I'm looking for a source of a similar game, with:
- a mouse listener, with te option te rotate the selected stone (0, 90, 180, 270), and to move the selected stone.
- enable/disable stone collections. (take turns)
PS. if you don't know where i can find a source similar to this game, sites with game souces are also welcome.
Thanks alot :D

Ok, here's what i already have.
import java.awt.*;
import java.applet.*;
import java.awt.event.*;
public class quadsapplet extends Applet
//declaraties voor stenen
private Steen Steen1;
     private Steen[] steentjesSpeler1;
private Steen[] steentjesSpeler2;
private Steen[] speelBord;
     private static Image achtergrond;
     private String plaatje;
     private int vak1, vak2, vak3, vak4, x, y, xBord, yBord;
public TextField tekstvak1;
public TextField tekstvak2;
public TextField tekstvak3;
public Button knop;
public Button knop1;
//declaraties voor bord
private Bord bord;
     public void init()
tekstvak1 = new TextField();
tekstvak1.setBounds(10, 550, 70,30);
add (tekstvak1);
tekstvak2 = new TextField();
tekstvak2.setBounds(300, 550, 70,30);
add (tekstvak2);
tekstvak3 = new TextField();
tekstvak3.setBounds(700, 550, 70,30);
add (tekstvak3);
knop = new Button("Verplaats grijs");
knop.setBounds(150, 550, 100,30);
knop.addActionListener(new KnopHandler() );
add (knop);
knop1 = new Button("Verplaats zwart");
knop1.setBounds(450, 550, 100,30);
knop1.addActionListener(new Knop1Handler() );
add (knop1);
setBackground(new Color(150, 156, 223 ));
          steentjesSpeler1 = new Steen[18];
steentjesSpeler2 = new Steen[18];
speelBord = new Steen[36];
          vak1 = 1;
          vak2 = 1;
          vak3 = 1;
          vak4 = 1;
          xBord = 200;
yBord =10;
x = 20;
// bord
//stenen speler 1
          for(int i=0 ; i<18 ; i++)
               steentjesSpeler1[i] = new Steen(Color.black, x, y, vak1, vak2, vak3, vak4, false, "3");
steentjesSpeler1.setArrX(i);
               add(steentjesSpeler1[i]);
               System.out.println("Steen "+(i+1)+" created!" );
               plaatje = "./images/g"+(i+1)+".jpg";
               achtergrond = getImage( getDocumentBase(), plaatje );
               System.out.println(plaatje );
               steentjesSpeler1[i].setafbeelding( achtergrond );
               x += 70;
               if(x>99)
                    x = 20;
                    y += 60;
//stenen speler 2
for(int i=0 ; i<18 ; i++)
               steentjesSpeler2[i] = new Steen(Color.black, x + 630 , y - 540, vak1, vak2, vak3, vak4, false, "3");
               add(steentjesSpeler2[i]);
               System.out.println("Steen "+(i+1)+" created!" );
               plaatje = "./images/z"+(i+1)+".jpg";
               achtergrond = getImage( getDocumentBase(), plaatje );
System.out.println(plaatje );
steentjesSpeler2[i].setafbeelding( achtergrond );
               x += 70;
               if(x>99)
                    x = 20;
                    y += 60;
for(int i=0 ; i<36 ; i++)
               speelBord[i] = new Steen(Color.black, xBord, yBord, vak1, vak2, vak3, vak4, false, "3");
speelBord[i].setArrX(i);
//speelBord[1] = new Steen(Color.black, xBord, yBord, 1,1,1,1, false, "3");
add(speelBord[i]);
System.out.println("Steen "+(i+1)+" created!" );
               plaatje = "./images/"+(i+1)+".jpg";
               achtergrond = getImage( getDocumentBase(), plaatje );
               System.out.println(plaatje );
               speelBord[i].setafbeelding( achtergrond );
               xBord += 70;
               if(xBord>550)
                    xBord = 200;
                    yBord += 70;
          setLayout( null );
} // eind init()
class KnopHandler implements ActionListener
public void actionPerformed ( ActionEvent e)
String invoer1 = tekstvak1.getText();
int getal1 = -1;
getal1 = Integer.parseInt( invoer1 );
String invoerstring2 = tekstvak2.getText();
int getal2 = -1;
getal2 = Integer.parseInt( invoerstring2 ) ;
speelBord[getal2].afbeelding = steentjesSpeler1[getal1].afbeelding;
tekstvak2.setText("");
tekstvak1.setText("");
for (int teller = 0; teller<36; teller++){
speelBord[teller].repaint();
getal1 = -1;
getal2 = -1;
class Knop1Handler implements ActionListener
public void actionPerformed ( ActionEvent e)
String invoer3 = tekstvak3.getText();
int getal11 = -1;
getal11 = Integer.parseInt( invoer3 );
String invoerstring22 = tekstvak2.getText();
int getal22 = -1;
getal22 = Integer.parseInt( invoerstring22 ) ;
speelBord[getal11].afbeelding = steentjesSpeler2[getal22].afbeelding;
tekstvak2.setText("");
tekstvak3.setText("");
for (int teller = 0; teller<36; teller++){
speelBord[teller].repaint();
getal11 = -1;
getal22 = -1;
//tekenen van het bord
/*public void paint( Graphics g )
//bord.tekenBord( g, 172, 20);
//g.drawString(Bord.bord[0][0]);
My problems right now are,
- i can't select more than 1 stone
- i can't rotate 1 stone (i did rotate them all, but that's a bit useless)
- i can't make players to take turns.
- i can't move stones, i can only copy them...
So if i can't use source codes, does anyone know a tutorial for all this?
PS. sorry about the dutch code.

I need some help with Migration Assistant for transferring data

I would like to transfer selected items from my iMac (G4) to a new MacBook Pro using Migration Assistant, Can I selectively choose things to transfer? And are there any problems going from a G4 to an Intel-based machine? I'm mostly interested in transferring iPhoto photos and music from iTunes.

Migrating data other than your home folder may replace Intel components with PowerPC ones on the MacBook Pro, which will cause slow performance. Dragging over applications manually by restarting the old Mac with the T key held down and then placing them in the new Mac's Applications folder will work with many applications, but not all; any applications for which this doesn't work will need to be reinstalled.
(21366)

I need some help resizing my images on PS6. I am using a mac and have been trying to resize with same resolution and constaining proportions but for some reaseon the smaller resized image appears pizelated.

I need some help resizing my images on PS6. I am using a mac and have been trying to resize with same resolution and constaining proportions but for some reaseon the smaller resized image appears pizelated. Heres an image of before and after. The first image I use is a JPG 72dpi 1500px x1500px and I want to downsize it to 600x600px same res, but it keeps pixelating, this has never happened before. Any suggestions, thoughts?
thanks!

I wouldn't say pixelated; more like blurry.
Like ConnectedCreative said, what steps are you using? Are you using "bicubic sharper" when resizing down?

TS1702 New IPhone4s using primarily for Internet overseas and FaceTime states it is waiting to activate need some help

Need some help activating my face time on my new phone. Am overseas and not in phone range so trouble shooting is difficult

I maybe completely off base (i don't have t-mobile) but it was my understanding that you would still need a 'data' plan for a) most of the applications to work and b) to receive service books etc and that the wi-fi would only give you access to 'website' and not the email etc.
If the unit is rebooting, then it would be sign of a bad BB, I would recommend reinstalling the OS using the desktop manager but if you just got the unit and are still in the 15-30 day period (not sure how long t-mobile does a return) I would ask for a replacement unit.
Again, not sure on the top part so hopefully someone else may have an answer for you.

Need some help in creating Search Help for standard screen/field

I need some help in adding a search-help to a standard screen-field.
Transaction Code - PP01,
Plan Version - Current Plan (PLVAR = '01'),
Object Type - Position ( OTYPE = 'S'),
Click on Infotype Name - Object ( Infotype 1000) and Create.
I need to add search help to fields Object Abbr (P1000-SHORT) / Object Name (P1000-STEXT).
I want to create one custom table with fields, Position Abb, Position Name, Job. Position Abb should be Primary Key. And when object type is Position (S), I should be able to press F4 for Object Abb/Object Name fields and should return Position Abbr and Position Name.
I specify again, I have to add a new search help to standard screen/field and not to enhance it.
This is HR specific transaction. If someone has done similar thing with some other transation, please let me know.
There is no existing search help for these fields. If sm1 ever tried or has an idea how to add new search help to a standard screen/field.
It's urgent.
Thanks in advace. Suitable answers will be rewarded

Hi Pradeep,
Please have a look into the below site which might be useful
Enhancing a Standard Search Help
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/daeda0d7-0701-0010-8caa-
edc983384237
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ee93446011d189700000e8322d00/frameset.htm
A search help exit is a function module for making the input help process described by the search help more flexible than possible with the standard version.
This function module must have the same interface as function module F4IF_SHLP_EXIT_EXAMPLE. The search help exit may also have further optional parameters (in particular any EXPORTING parameters).
A search help exit is called at certain timepoints in the input help process.
Note: The source text and long documentation of the above-specified function module (including the long documentation about the parameters) contain information about using search help exits.
Function modules are provided in the function library for operations that are frequently executed in search help exits. The names of these function modules begin with the prefix F4UT_. These function modules can either be used directly as search help exits or used within other search help exits. You can find precise instructions for use in the long documentation for the corresponding function module.
During the input help process, a number of timepoints are defined that each define the beginning of an important operation of the input help process.
If the input help process is defined with a search help having a search help exit, this search help exit is called at each of these timepoints. If required, the search help exit can also influence the process and even determine that the process should be continued at a different timepoint.
timepoints
The following timepoints are defined:
1. SELONE
Call before selecting an elementary search help. The possible elementary search helps are already in SHLP_TAB. This timepoint can be used in a search help exit of a collective search help to restrict the selection possibilities for the elementary search helps.
Entries that are deleted from SHLP_TAB in this step are not offered in the elementary search help selection. If there is only one entry remaining in SHLP_TAB, the dialog box for selecting elementary search helps is skipped. You may not change the next timepoint.
The timepoint is not accessed again if another elementary search help is to be selected during the dialog.
2. PRESEL1
After selecting an elementary search help. Table INTERFACE has not yet been copied to table SELOPT at this timepoint in the definition of the search help (type SHLP_DESCR_T). This means that you can still influence the attachment of the search help to the screen here. (Table INTERFACE contains the information about how the search help parameters are related to the screen fields).
3. PRESEL
Before sending the dialog box for restricting values. This timepoint is suitable for predefining the value restriction or for completely suppressing or copying the dialog.
4. SELECT
Before selecting the values. If you do not want the default selection, you should copy this timepoint with a search help exit. DISP should be set as the next timepoint.
5. DISP
Before displaying the hit list. This timepoint is suitable for restricting the values to be displayed, e.g. depending on authorizations.
6. RETURN (usually as return value for the next timepoint)
The RETURN timepoint should be returned as the next step if a single hit was selected in a search help exit.
It can make sense to change the F4 flow at this timepoint if control of the process sequence of the Transaction should depend on the selected value (typical example: setting SET/GET parameters). However, you should note that the process will then depend on whether a value was entered manually or with an input help.
7. RETTOP
You only go to this timepoint if the input help is controlled by a collective search help. It directly follows the timepoint RETURN. The search help exit of the collective search help, however, is called at timepoint RETTOP.
8. EXIT (only for return as next timepoint)
The EXIT timepoint should be returned as the next step if the user had the opportunity to terminate the dialog within the search help exit.
9. CREATE
The CREATE timepoint is only accessed if the user selects the function "Create new values". This function is only available if field CUSTTAB of the control string CALLCONTROL was given a value not equal to SPACE earlier on.
The name of the (customizing) table to be maintained is normally entered there. The next step returned after CREATE should be SELECT so that the newly entered value can be selected and then displayed.
10. APP1, APP2, APP3
If further pushbuttons are introduced in the hit list with function module F4UT_LIST_EXIT, these timepoints are introduced. They are accessed when the user presses the corresponding pushbutton.
Note: If the F4 help is controlled by a collective search help, the search help exit of the collective search help is called at timepoints SELONE and RETTOP. (RETTOP only if the user selects a value.) At all other timepoints the search help exit of the selected elementary search help is called.
If the F4 help is controlled by an elementary search help, timepoint RETTOP is not executed. The search help exit of the elementary search help is called at timepoint SELONE (at the
F4IF_SHLP_EXIT_EXAMPLE
This module has been created as an example for the interface and design of Search help exits in Search help.
All the interface parameters defined here are mandatory for a function module to be used as a search help exit, because the calling program does not know which parameters are actually used internally.
A search help exit is called repeatedly in connection with several
events during the F4 process. The relevant step of the process is passed on in the CALLCONTROL step. If the module is intended to perform only a few modifications before the step, CALLCONTROL-STEP should remain unchanged.
However, if the step is performed completely by the module, the following step must be returned in CALLCONTROL-STEP.
The module must react with an immediate EXIT to all steps that it does not know or does not want to handle.
Hope this info will help you.
***Reward points if found useful
Regards,
Naresh

Just brought a ipad2 need some help using it.

Need some help using ipad2

Also, Good Instructions http://www.tcgeeks.com/how-to-use-ipad-2/
Apple - iPad - Guided Tours
http://www.apple.com/ipad/videos/
Watch the videos see all the amazing iPad apps in action. Learn how to use FaceTime, Mail, Safari, Videos, Maps, iBooks, App Store, and more.
You can download this guide to your iPad.
iPad User Guide for iOS 5
http://itunes.apple.com/us/book/ipad-user-guide-for-ios-5/id470308101?mt=11
 Cheers, Tom

Need some help frist time useing dreamweaver

Hey all,
I am totaly new to Dreamweaver and am needing some help. I am
needing to make a feedback form. Would need it to e-mail me the
feedback to something like [email protected] I also need to know
how to make a footer for the copyright and desiged by, on each page
without having to manually entering them. Any help I could get
would be awsome.

There are only two ways to process form data -
1. Use mailto:[email protected] as the action of the form
2. Use a server-side scripting method to a) harvest the
form's data, b)
process it in some manner, e.g., enter it into a database, c)
formulate and
send an email to one or more email recipients, and d)
redirect the visitor
to some ending page
Method 1 is quite simple, and is also the least reliable. It
depends both
on your visitor having an email client already installed on
their computer -
this eliminates public computers, or home users without email
clients
installed (more and more it seems) - and on the installed
email client
responding to
the mailto call. It is not possible to use this method *and*
send the
visitor to a
thank you page as well.
Method 2a is the preferred method, since it eliminates the
problems of
method
1, but it means that you have to grapple with
server-scripting somehow (ASP,
CF, PHP, perl, etc.).
Method 2b would be to use some third-party form processing,
like
http://www.bebosoft.com/products/formstogo/.
You would have to decide which of these methods is best for
your needs,
but if it's Method 2a, then start by asking your host what
they provide for
form
processing. If it's 2b, then read their FAQ/instructions
carefully.
For your footer, investigate the use of DW's Templates (use
F1 Help to read
about them), or of server-side includes (again, F1 Help will
give you some
info here, as will Google).
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Xysos_Designs" <[email protected]> wrote in
message
news:[email protected]...
> Hey all,
> I am totaly new to Dreamweaver and am needing some help.
I am needing to
> make
> a feedback form. Would need it to e-mail me the feedback
to something like
> [email protected] I also need to know how to make a
footer for the
> copyright
> and desiged by, on each page without having to manually
entering them. Any
> help
> I could get would be awsome.
>

Stupidly partition hdd on window7 in IMAC A1311, and now I can not use the IMAC...... Need some help

Just bought a used IMAC A1311 core 2 duo, and there are something called Bootcamp and Window7 on it, and i log in to Window7 and stupidly partition hdd on it, and i think it has formatted everything. now the window7 is error and I do hold (alt) key when I start up the machines , it show only the window7 hdd and i don't see any Recoery HDD........what should i do? Really need some helps right now.........

There are several models that use A1311. So I don't know exactly what model you have. If you received installer discs with the computer, then you will need to boot from Disc 1, erase the drive, and install Snow Leopard. Some models in the A1311 line can use Internet Recovery:
Install Mavericks, Lion/Mountain Lion Using Internet Recovery
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Internet Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
Partition and Format the hard drive:
Select Disk Utility from the main menu and click on the Continue button.
After DU loads select your newly installed hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
Reinstall Lion/Mountain Lion. Mavericks: Select Reinstall Lion/Mountain Lion, Mavericks and click on the Install button. Be sure to select the correct drive to use if you have more than one.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
This should restore the version of OS X originally pre-installed on the computer.

I am currently using an ipod touch 3. When i record in voice memos with the apple earphones(with an inbuilt mic) i can see on the screen that its recording; but when i hear it, its just a long beep. Need some help!

I am currently using an ipod touch 3. When i record in voice memos with the apple earphones(with an inbuilt mic) i can see on the screen that its recording;
but when i hear it, its just a long beep. Need some help!

Does the mic work for other apps like Voice Control?
Does the mic work OK in other devices?
Have you tried it with another mic?
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

Need Some Help in Using Log4j for logging

Similar Messages

Maybe you are looking for