Need some help Ipad 2 black screen no apple logo ios7.1.2

Updated to ios 7.1.2 worked fine until this morning now i have a blackscreen no apple logo but backlight works. I have tried soft reset, hard reset, recovery mode

Try reset iPad a few more times.
Hold the Sleep/Wake and Home button down together until you see the Apple Logo.
Note: Data will not be affected.

Similar Messages

  • Help!! Ipod touch alternates between black screen and apple logo.

    need help!!! Since yesterday my ipod touch 1st generation shows black screena dn then every 6 seconds spple logo,It wont switch off,just keeps doing this until battery goes flat.Tried restarting it,restoring settings,nothing works.If i plug it into computer eventually comes back to home page screen but when unplugged reverst back to apple logo.Any ideas?

    Oops,i mean reset and restart,not restore.I need to get everything backed up first before i restore it all and lose it! At the moment it just has a black screen then apple logo and the top button wont switch it off.
    I had a thought,yesterday i downloaded the latest itunes that popped up on the screen,could this have anything to do with it?

  • Ipod 4 is displaying blue frozen screen and black screen with apple logo. I try to turn power off but as soon as it goes out it automatically reboots. Plugged it into the usb port on my mac and it doesnt do anything. It doesnt appear in Itunes. Help?

    ipod 4 is displaying blue frozen screen and black screen with apple logo. I try to turn power off but as soon as it goes out it automatically reboots. Plugged it into the usb port on my mac and it doesnt do anything. It doesnt appear in Itunes. Help?

    Let the battery fully darain. After charging for an least an hour try a reset and restore. Use Recovery mode if necessary.
    If not successful, then time for an appointment at the Genius Bar of an Apple store.

  • Black Screen with Apple Logo randomly appears.

    HELP! When I'm using my 60 gig 5th gen. ipod...I listen to a song, or watch a movie and after 2-5 the song/movie stops, and the black screen with apple logo appears. It almost seems like the ipod is just reseting itself or something. I don't understand the problem.
    eMac   Mac OS X (10.4.3)  

    Hello!! I had the same issue. (with the 30 Gig) Eventually, my iPod went berserk, and kept reseting over and over until the battery died.
    I did fix it. It's pretty simple, in fact. Warning: ALthough i hate to say it, you need to update to iPod software 1.1. There are several bugs with this update, see the thread with all the replys. However, it seems to be more annoyance than real issue, and 1.1 completely, utterly stoped the apple logo screen. The saving of my battery, and prevention of the resets, to me, outweighs the minor annoyances of glitches with the update.
    Glitches i've noticed: holding the menu button no longer turns on/off the back light. Some videos no longer copy to the iPod, despite the fact that iTunes can play them, and the used to copy, and are within iPod's capabilities. They are generally converted with a program other than QuickTime. There are others people hae noticed, but that's all that i've seen so far.
    Since you have Mac 10, simply do a software-update, and download all the neccessary software. Update the iPod.
    Some videos are not likely going to copy to the iPod. This is due to the update. You need to re-encode them. If you don't want to pay for QT Pro, there's a free utility to covert nearly any video to iPod format. It's called iSquint. (do a search on versiontracker.com) I've used it a lot in the last few days, and it's great! The videos it converts seem perfectly suited to iPod, despite the update! Unfortunately, there seems to be no way around the error iTunes gives you about not-copying videos due to iPods's inability to play a video without a re-encode.
    Hopefully, this will help you out!
    -Dan
    Powerbook G4   Mac OS X (10.4.4)   iPod 5G, 30Gig, system 1.1

  • My iphones buttons are not working and it shows a black screen whith apple logo on it what should i do now?

    my iphones buttons are not working and it shows a black screen whith apple logo on it what should i do now?
    and i have to post sth importent on instagram tonight so its ergent please help....

    Greetings motahare,
    After reviewing your post, I have located an article that can help with iOS device issues. It contains a number of troubleshooting steps and helpful advice for the issue you are experiencing:
    If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on - Apple Support
    Thank you for contributing to Apple Support Communities.
    Best,
    Bobby_D

  • 4s bricked after trying new update, stuck with black screen with apple logo how can i fix this

    Update bricked my 4s
    phone , stuck with black screen with apple logo .. 
    how can I fix this

    Greetings r1042,
    Welcome to the Apple Support Communities!
    I understand that your iPhone is not booting up past the Apple logo. In this situation, I would recommend working through the troubleshooting steps located in the attached article.
    If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on - Apple Support
    If your device gets stuck during startup
    When starting up, you might see the Apple logo or a red or blue screen for a long time, or your device might restart again. Try these steps:
    Make sure that you have iTunes 12 or later on your computer.
    Put your device in recovery mode.
    When you get the option to restore or update, select Update. This will reinstall iOS without erasing your data.
    Have a great day,
    Joe

  • Iphone 5 got wet last week.  Been in rice until today.  It turned on and worked fine, I could see a water spot in the middle but still worked fine, 3 hours in it shut off to black screen with apple logo.  Any ideas what to do?

    Iphone 5 got wet last week.  Been in rice until today.  It turned on and worked fine, I could see a water spot in the middle but still worked fine, 3 hours in it shut down to the black screen with apple logo.  Screen stays up for 10 seconds ago and then goes black and then black screen with apple logo comes back.  Any ideas what to do?

    At this point it's likely that the iPhone has suffered damage and you'll have to take or send it to Apple for replacement. If you have AppleCare+ coverage on the iPhone, the cost will be US $49. Otherwise the cost will be US $229.
    Regards.

  • After wiping phone to sell phone will not turn on, it stays on a black screen with apple logo.after forced reboot, it goes to same exact screen. any ideas?

    my brothers girlfriend gave me her old iPhone. the last thing she did to the working phone was to wipe it to erase all her private info. however instad of booting up like normal, all i get is a black screen with apple logo. ive forced a reboot and it goes to same screen. sometimes it will turn off and reboot by itself, and occasionally it wil give a low battery icon, and it will show it charging for a few min then go back to black screen with Appple logo. any ideas anyone?

    Try to charge it for about 10min using th adapter, then connect to your computer in recovery mode, explained here: iOS: Unable to restore

  • I was restoring my Ipone  4s and it froze and just has a black screen with apple logo on, I can't do anything with it

    I Updated the new Iso 8 when it came out. I lost my wifi connections so tried to update phone to the latest version of ISO and it kept saying connection lost and couldn't download. I was doing this via iTunes because I had no wifi. So I decided to restore my phone, it went through the process and then just froze with black screen and apple logo. iTunes won't find  it now. What can I do, argh

    Go to this Apple support page. Scroll down to the bottom and follow the steps to put your device into Recovery mode.
    iOS: Forgot passcode or device disabled

  • My phone is frozen with black screen and apple logo on it

    My phone is frozen with black screen and apple logo on it.s Not connecting to itunes

    Basics from the user guide are restart, reset, restore from backup, restore as new.  Have these ALL been tried?

  • My iPad crashed!  I tried a soft boot but didn't work.  Stuck on black screen with apple logo!!!

    How can I fix an iPad crash???  I have tried to reboot but only get a black screen with the apple logo.  I need help!!!

    FORCE IPAD INTO RECOVERY MODE
    1. Turn off iPad
    2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port.
    DO NOT RELEASE BUTTON until you see picture of iTunes and plug
    5. Release Home button.
    ON COMPUTER
    6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
    7. Select "Restore iPad"...
    Note:
    1. Data will be lost if you do not have backup
    2. If you did not do step 4 properly, start all over again.

  • Black screen and apple logo! Help please!

    My iPod 5g running on iOS 7.6 won't turn on. It just repeats the same pattern of black screen and the apple logo over and over. Help me please!

    Try:                                               
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable       
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • My ipad wont turn on after black screen and apple logo

    i was playing on my ipad and then out of nowhere it turns off and the apple logo comes on. after about a minuete of the logo it disseapears and the screen become black again. i have tried holding both buttons down but it still wont turn on

    Hello dbrasif,
    Thank you for providing the details of the issue you are experiencing with your iPad.  It is definitely inconvenient and frustrating when you are not able to access your iPad.
    I recommend following these steps for the issue you described:
    If a single application is not responding or stops responding when it opens, you can force it to close.
    If the device is unresponsive or if certain controls aren't working as expected, restart your device.
    If the device remains unresponsive or does not turn on (or power on),reset your device.
    If there is no video or if the screen remains black, verify that the device has enough charge to turn on:
    If you are using an iPad, ensure that it's connected to the USB Power Adapter supplied with the device.
    Let charge for at least twenty minutes, then see if it starts normally.
    If there is no image on the screen, press the Sleep/Wake button to attempt to wake the device.
    If the screen displays a red battery icon, continue charging the device until the battery is fully charged.
    If the above steps do not resolve the issue, or the if the screen remains black or shows a persistent Apple logo, try restoring with iTunes:
    Connect the device to your computer and open iTunes.
    If the device appears in iTunes, select and click Restore on the Summary pane. Learn more about restoring iOS software.
    If the device doesn't appear in iTunes, try to force the device into recovery mode, and then restore it.
    If the above steps do not resolve the issue, contact Apple.
    You can find the full article here:
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    If you get to step 5, I recommend backing up your iPhone before performing the restore:
    iOS: How to back up and restore your content
    http://support.apple.com/kb/HT1766
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • 4g Ipod touch is stuck on black screen with apple logo, please help!

    i have a 4G ipod touch, while downloading an app it froze and i restarted it using the home and sleep buttons. now its stuck on a black screen with the apple logo. Ive tried to restart it again, plug it into the computer and do what all the forums say but none have worked. When i plug the ipod into the computer and restart it, itll stay on the black screen for 5-10 minutes then flash to a white screen and restart itself all over again, any ideas how to fix this problem? thanks

    Well it depends if you restore from a backup or not (if you have any).  Try restoring from a backup first. If the problem still continues, then you'll need to set it up as a new iPod, meaning you would lose the content stored on your iPod including, music, videos, apps, app data, etc.
    See this article for what is included in a backup.
    http://support.apple.com/kb/ht1766
    And see this article for assistance on restoring your iPod from a backup.
    http://support.apple.com/kb/ht1414
    Either content, such as your music, movies, apps, etc should still be in your iTunes library as well.  So you should be able to sync it back over to the iPod once you have restored it.
    B-rock

  • Iphone is stuck in black screen white apple logo.Help!

    I had a notication to update my IOS so I let the update run from my phone. Now my phone is stuck on black background with white apple logo. It has been this way for about 45 minutes. I tried connecting to itunes. Trying to restore my phone. Tried turning it off and on. Nothing is working. I have it plugged in right now and I am holding down the power and home buttons, it goes black for a couple seconds and then the logo pops right back up. Any advice?? I can't get the phone out of this screen.

    You may have to place the phone in DFU mode and restore to factory condition using iTunes. Search the web for the procedure.

Maybe you are looking for

  • Variable for Fiscal Year Period in cube "0ECCS_C01" - Urgent

    Hi all, I have created a query based on cube "0ECCS_C01". I have restriced the characterstic " Fiscal Year Period" on  "Period/Fiscal Year (Single Value Entry, Required)" variable. Output of the query are just 2 numbers : sum of "cumulative value GC"

  • GMAIL Lost after upgrade to IOS 8.3

    I have lost access to my GMAIL accounts after upgrading to IOS 8.3 ! IOS Settings does not provide me a way to enter a new application password for the account - there is NO PASSWORD box displayed anywhere in the GMAIL configuration. So I tried delet

  • My cd/dvd drive is inop on my 13inch macbook pro and will not show a disc or eject it

    cd/dvd drive will not work and will not display any disc in the drive. I have been unsucsessful in trouble this and the blank cd-r currently in the drive won't even eject manually even with a restart.

  • HP PSC 2175 problems in Windows 8

    Hello everybody. I own a HP PSC 2175 since 2002; I've used this printer in Windows XP, Windows Vista and Windows 7 before moving to Windows 8 (and soon to Windows 8.1). I've always been very satisfied with this device. According to the informations p

  • RG 1 updating Problem

    Hi, For RG1 update, In Tcode j1i5 after filling all respective parameters when we execute, a list of material doc for finished goods displayed but after simulate green light appers, then again we do simulate then by selecting material doc when we cli