Need some help please, itunes 7.1 and Windows Vista

Hello,
I've got a bit of a problem here with itunes and my ipod nano.
Basically I'm using Windows Vista Ultimate 32bit and when I connect my ipod to my PC the found new hardware wizard pops up but can never find the ipod nano.
In disk management the ipod is showing up but in itunes its not.
Could anyone advise on this please?

A little update about this issue and it's good news. I've managed to get the ipod show up in disk management with the ipods name and when I open itunes and plug the ipod in, it pops up in itunes.
Heres it is just like it should be, a result!
http://img291.imageshack.us/img291/1293/untitled1ln0.jpg
Basically what I did to fix this issue in Windows Vista was the following
1.Click Start type run in the search bar and then msconfig.
2.Click on the Services tab and "hide all Microsoft Services".
3.Click Disable All for all the non Microsoft services that are showing.
4.Click OK
5.Click Restart.
6.When your desk top loads up click OK for the msconfig menu which pops up.
7.Open itunes and connect your ipod.
It should now show it does for me.
Now follow step 1 again and load all services as your pc would start normally again and reboot, again your ipod should show up now as it should.
I hope that's useful if anyone else experiences the same.

Similar Messages

  • TS2634 Please People I need some help.My iPod is disabled and when I connect it to iTunes it says: Itunes could not connect to the ipod because it is locked with a passcode...

    Please People I need some help.My iPod is disabled and when I connect it to iTunes it says: Itunes could not connect to the ipod because it is locked with a passcode...how can I do it?

    Place the iPod in Recovery mode and then restore.

  • Need some help: my itunes won't sync with my iphone anymore. Both softwares are up to date and I've reinstalled itunes. After I reinstall, it syncs. But then when I reboot my computer, it no longer syncs anymore and I have to keep reinstalling itunes. Tho

    Need some help: my itunes won't sync with my iphone anymore. Both softwares are up to date and I've reinstalled itunes. After I reinstall, it syncs. But then when I reboot my computer, it no longer syncs anymore and I have to keep reinstalling itunes. Thoughts???

    thought that it was possible to have the same iTunes library on any machine that was authorised, a kind of cloud-iTunes I guess. 
    That would convenient, but sadly it is not the case. Sorry!
    Either way your welcome and best of luck!
    B-rock

  • Hi! I got movies on my external hard drive that are AVI kind and won't play on my macbook pro? need some help please!!

    Hi! I got Movies on my external hard drive that are AVI kind and won't play on my macbook pro? When I start playing the movie a message pops up and says "a required codec is not available". I tried flip4mac, xvid, divx already and still not playing my video. need some help please!! thanks.

    Although vlc mentioned above is a much more powerful and better player you could try installing Perian if you insist on using the quicktime player.  It may supply the codec it needs.
    Not sure why you wouldn't be able to play straight avi files though in quicktime.

  • Remote App on iPad connects but drops after about  20 mins. Need to turn  off wait about 1 minute then turn on wifi on iMac before it can reconnect. Need some help please.

    Remote App on iPad connects but drops after about  20 mins. Need to turn  off wait about 1 minute, then turn on wifi on iMac before it can reconnect. Need some help please.
    Already gone through troubleshooting guide a zillion times. Thanks.

    This worked for me... A little time consuming but once you get rolling it goes GREAT... Thanks....
    I got my artwork and saved it to my Desktop
    Opened up Microsoft Paint and clicked on "File" and "Open" and found it to get it on the screen to resize it
    Clicked "resize" and a box for changing it opened up
    Checked the box "Pixels" and "Unchecked maintain aspect ratio"
    Set Horizontal for 640 and Vertical for 480
    Clicked on "OK" and went back to "File" and did a "Save As" and chose JPEG Picture
    It came up "File Already Existed" and clicked "OK" (really did not care about the original artwork I found because wrong size)
    Went to iTunes and on the movie right clicked on "Get Info", clicked on "Details", then "Artwork"
    Go to the little box on the top left that shows your old artwork and click on it to get the little blue border to appear around it and hit "Delete" to make it gone
    Click on "Add Artwork" and find it where you put the one from above on your Desktop and hit "Open" and OK and your new artwork is now there and all good.
    Sounds like a lot of steps to follow but after around 5 or so you will fly through it. This worked perfect on my iPhone 6 Plus and I have artwork on my Home Videos now.

  • Ok I got my iPod from my brothers friend and my IPod says "iPod is disabled connect to iTunes" then my computer says cannot get onto iPod because I need the iPod passcode and of course I cannot put it in so I need some help please

    Ok i got my iPod from my brothers friend and my IPod says "iPod is disabled connect to iTunes" then my computer says cannot get onto iPod because I need the iPod passcode and of course I cannot put it in so I need some help please

    Try placing in DFU mode and then restoreing.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

  • Need some help with a Macally enclosure and a spare internal drive

    Need some help with a Macally enclousure
    Posted: Oct 1, 2010 10:55 AM
    Reply Email
    Aloha:
    I have a Macally PHR-S100SUA enclousure that does not recognise,my WD 1001fals hard drive. It has worked just fine with other internal drives, but not this one?
    This is a spare internal drive that I am trying to make an external drive to store back ups for a lot of data. But so far I can not get it recognized by the computer. Maybe I need different drivers?
    Any suggestions?
    Dan Page

    Hi-
    Drivers aren't typically needed for external enclosures.
    Macally has none listed for that enclosure.
    The same is true for the WD drive, internal or external; no drivers.
    With the exception of high end PM multi drive enclosures, I can't think of any that use drivers.
    How is the external connected?
    Have you tried different cables, different ports?
    Bad/damaged cables are fairly common.
    Have you verified connections inside of the enclosure?

  • I am the biggest "Newb" on this site,  and I really need some help please..

    Ok, the short of it.... I started training on Database programming about 2 weeks ago. I still don't really know a thing, or even understand the concepts. Now, my boss wants me to fix a bug in Oracle, and I haven't a clue. The ONLY help I've gotten was a link to this forum, and a speech about how I need to help myself. I told him I have the same chance of fixing anything, as monkeys typing hamlet. Anyone up for a challenge?
    When I go to Application System, then Application Entry and enter the password a dialog box appears.... "FRM-40039: Cannot attatch library Empower while opening from APPUSRAPP."
    That's what I have to fix. I have no clue. I don't even really know how to click around in this program. Please help, someone.
    UPDATE: I've been told that everyone's pretty much going to be a jerk to me for asking this, and I'm currently searching old threads and can't find a way to delete this one I posted. So, you could just ignore the post, or jump in and be the internet tough-guy and tell me what I already know.... I'm a newb.
    Edited by: user11033020 on Apr 14, 2009 11:41 AM

    As this appears to be a Forms error (the error begins with FRM) you might get a better response by posting this in the Forms forum:
    Forms
    The Community Feedback forum isn't meant for product-related questions (as it says in the title).
    Still, you should consider searching Metalink as well. If you've paid for support, you have every right to use it.

  • Really really need some help please.

    lost all my audio. nothing plays anymore. cant even hear the trash empty any more. no itunes, nothing. no dvd audio. also noticed itunes wont play songs anymore, progress bar just sits there. also movies on youtube dont play anymore. when i try to turn up audio i get a zero symbol with a slash thru it. im stumped. help please. thanks

    Whatever has happened, I've assumed it just happened and is systemic.
    To start: Go to Applications/Utilities and run Disk Utility, select your startup drive, and click on the Repair Permissions button at the bottom of the window.
    If that works, you're done, if not, pull out your Tiger startup DVD, insert it, select the Installer, and Restart your Mac from the DVD. When you get to the installer screen, go to the menus at the top of the screen and select Disk Utility, and this time click on the Repair Disk button. This will check your file system integrity and repair it.
    When you've done that, post back.
    If those don't work, you may need to do an Archive & Install, from this same DVD. This will preserve your accounts/apps/data, but will require you to repeatedly run Software Update to bring everything current again.
    Good Luck...

  • My first java programming - Need some help please!!!

    I have to create a simple java program which i am not good at i am ok in C but my java is quite bad. The program need to define a class called Student and with a string called StudentNAme, a integer StudentID(key), An array of 8 integers called Marks that holds the students marks for 8 modules. It also says Include appropriate accessors, mutators and constructor(s) as well as a method to update the student�s marks. Anybody please help me in this question. I prefer an simple example of this program so I can learn faster, I dont even know how to declare a class.. So sorry but please help me out and thanks in advance

    I would also suggest you try using an IDE like
    eclipse (free)
    www.eclipse.org
    This will help you get a working program much faster.But please do also tell them that if they have troubles using it, they're supposed to read the IDE manual instead of posting here.

  • 2100 WLC 1130 APs - need some help please

    It's been about 5 years since I took my CCNA course and could use some help on a wireless set up for church.
    We have a Catalyst 3550 that is running fine, just a few VLANs, including 30 for public wireless.  I've then got a 2100 WLC and (3) 1130 AP's.  After much head banging, I've got the WLC set up correctly (i believe)
    VLAN 30 is a 10.0.3.x segment
    switch is 10.0.3.1
    WLC mgmt interface is 10.0.3.20 - connected to the switch on port 1
    WLC ap mgmt interface is 10.0.3.21
    APs pull 10.0.3.30, 31,32. - they are plugged directly into the switch
    I can obviously see the APs while in the WLC GUI. 
    The AP's SSID don't show up wirelessly.  The AP's circle is red/orange
    The detail on the AP in the WLC shows them operationally down.
    What additional information can I provide?
    Much thanks.

    flashfs[0]: 28 files, 8 directories
    flashfs[0]: 0 orphaned files, 0 orphaned directories
    flashfs[0]: Total bytes: 15998976
    flashfs[0]: Bytes used: 6973952
    flashfs[0]: Bytes available: 9025024
    flashfs[0]: flashfs fsck took 28 seconds.
    Base ethernet MAC Address: 00:0a:b8:12:30:3c
    Initializing ethernet port 0...
    Reset ethernet port 0...
    Reset done!
    ethernet link up, 100 mbps, full-duplex
    Ethernet port 0 initialized: link is up
    Loading "flash:/c1130-k9w8-mx.124-23c.JA4/c1130-k9w8-mx.124-23c.JA4"...#########
    File "flash:/c1130-k9w8-mx.124-23c.JA4/c1130-k9w8-mx.124-23c.JA4" uncompressed a
    nd installed, entry point: 0x3000
    executing...
                  Restricted Rights Legend
    Use, duplication, or disclosure by the Government is
    subject to restrictions as set forth in subparagraph
    (c) of the Commercial Computer Software - Restricted
    Rights clause at FAR sec. 52.227-19 and subparagraph
    (c) (1) (ii) of the Rights in Technical Data and Computer
    Software clause at DFARS sec. 252.227-7013.
               cisco Systems, Inc.
               170 West Tasman Drive
               San Jose, California 95134-1706
    Cisco IOS Software, C1130 Software (C1130-K9W8-M), Version 12.4(23c)JA4, RELEASE
    SOFTWARE (fc1)
    Technical Support: http://www.cisco.com/techsupport
    Copyright (c) 1986-2012 by Cisco Systems, Inc.
    Compiled Fri 27-Jan-12 19:52 by prod_rel_team
    Proceeding with system init
    Proceeding to unmask interrupts
    Initializing flashfs...
    flashfs[1]: 28 files, 8 directories
    flashfs[1]: 0 orphaned files, 0 orphaned directories
    flashfs[1]: Total bytes: 15740928
    flashfs[1]: Bytes used: 6973952
    flashfs[1]: Bytes available: 8766976
    flashfs[1]: flashfs fsck took 4 seconds.
    flashfs[1]: Initialization complete....done Initializing flashfs.
    Radio0  present A506 7100 E8000000 A0000000 80000000 3
    Radio1  present A506 6700 E8000100 A0040000 80010000 2
    This product contains cryptographic features and is subject to United
    States and local country laws governing import, export, transfer and
    use. Delivery of Cisco cryptographic products does not imply
    third-party authority to import, export, distribute or use encryption.
    Importers, exporters, distributors and users are responsible for
    compliance with U.S. and local country laws. By using this product you
    agree to comply with applicable laws and regulations. If you are unable
    to comply with U.S. and local laws, return this product immediately.
    A summary of U.S. laws governing Cisco cryptographic products may be found at:
    http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
    If you require further assistance please contact us by sending email to
    [email protected].
    cisco AIR-LAP1131AG-A-K9   (PowerPCElvis) processor (revision A0) with 27638K/51
    20K bytes of memory.
    Processor board ID FTX1027T1S2
    PowerPCElvis CPU at 262Mhz, revision number 0x0950
    Last reset from power-on
    LWAPP image version 7.0.230.0
    1 FastEthernet interface
    2 802.11 Radio(s)
    32K bytes of flash-simulated non-volatile configuration memory.
    Base ethernet MAC Address: 00:0A:B8:12:30:3C
    Part Number                          : 73-8962-09
    PCA Assembly Number                  : 800-24818-08
    PCA Revision Number                  : A0
    PCB Serial Number                    : FOC102618H2
    Top Assembly Part Number             : 800-25544-06
    Top Assembly Serial Number           : FTX1027T1S2
    Top Revision Number                  : A0
    Product/Model Number                 : AIR-LAP1131AG-A-K9
    % Please define a domain-name first.
    Press RETURN to get started!
    *Mar  1 00:00:05.580: %SOAP_FIPS-2-SELF_TEST_IOS_SUCCESS: IOS crypto FIPS self t
    est passed
    *Mar  1 00:00:07.185: %SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: RADIO crypto FIPS self
    test passed on interface Dot11Radio 0
    *Mar  1 00:00:08.783: %SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: RADIO crypto FIPS self
    test passed on interface Dot11Radio 1
    *Mar  1 00:00:08.860: %LWAPP-3-CLIENTEVENTLOG: Read and initialized AP event log
    (contains, 135 messages)
    *Mar  1 00:00:08.889:  status of voice_diag_test from WLC is false
    *Mar  1 00:00:10.995: %LINK-3-UPDOWN: Interface FastEthernet0, changed state to
    up
    *Mar  1 00:00:11.052: %SYS-5-RESTART: System restarted --
    Cisco IOS Software, C1130 Software (C1130-K9W8-M), Version 12.4(23c)JA4, RELEASE
    SOFTWARE (fc1)
    Technical Support: http://www.cisco.com/techsupport
    Copyright (c) 1986-2012 by Cisco Systems, Inc.
    Compiled Fri 27-Jan-12 19:52 by prod_rel_team
    *Mar  1 00:00:11.053: %SNMP-5-COLDSTART: SNMP agent on host CenterHall is underg
    oing a cold start
    *Mar  1 00:00:11.133: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
    *Mar  1 00:00:11.312: %SSH-5-ENABLED: SSH 2.0 has been enabled
    *Mar  1 00:00:11.312: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up
    *Mar  1 00:00:11.312: %LINK-3-UPDOWN: Interface Dot11Radio1, changed state to up
    *Mar  1 00:00:11.552: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to r
    eset
    *Mar  1 00:00:11.552: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to r
    eset
    *Mar  1 00:00:11.999: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthern
    et0, changed state to up
    *Mar  1 00:00:12.316: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio
    0, changed state to down
    *Mar  1 00:00:12.316: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio
    1, changed state to down
    *Mar  1 00:00:19.436: %DHCP-6-ADDRESS_ASSIGN: Interface FastEthernet0 assigned D
    HCP address 10.0.3.30, mask 255.255.255.0, hostname CenterHall
    *Mar  1 00:00:29.995:  status of voice_diag_test from WLC is false
    *Mar  1 00:00:30.070: Logging LWAPP message to 255.255.255.255.
    *Mar  1 00:00:30.123: %CDP_PD-2-POWER_LOW: All radios disabled - HIGH_POWER_CLAS
    SIC_NOT_CONFIGURED WS-C3550-12T (000a.8a97.f785)
    *Mar  1 00:00:31.123: %SYS-6-LOGGINGHOST_STARTSTOP: Logging to host 255.255.255.
    255 started - CLI initiated
    Translating "CISCO-CAPWAP-CONTROLLER"...domain server (8.8.8.8)
    Translating "CISCO-LWAPP-CONTROLLER"...domain server (8.8.8.8)
    *Feb 11 15:46:42.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_i
    p: 10.0.3.21 peer_port: 5246
    *Feb 11 15:46:43.000: %CAPWAP-5-CHANGED: CAPWAP changed state to
    wmmAC status is FALSE
    *Feb 11 15:46:44.672: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully
    peer_ip: 10.0.3.21 peer_port: 5246
    *Feb 11 15:46:44.674: %CAPWAP-5-SENDJOIN: sending Join Request to 10.0.3.21
    *Feb 11 15:46:44.674: %CAPWAP-5-CHANGED: CAPWAP changed state to JOIN
    *Feb 11 15:46:45.449: %CAPWAP-5-CHANGED: CAPWAP changed state to CFG
    *Feb 11 15:46:45.718: %CAPWAP-5-CHANGED: CAPWAP changed state to UP
    *Feb 11 15:46:45.767: %CAPWAP-5-JOINEDCONTROLLER: AP has joined controller grace
    wireless
    *Feb 11 15:46:45.815: %LWAPP-3-CLIENTEVENTLOG: SSID GUMC_Guest added to the slot
    [0]
    *Feb 11 15:46:45.818: %LWAPP-3-CLIENTEVENTLOG: SSID GUMC_Guest added to the slot
    [1]
    *Feb 11 15:46:45.834: %WIDS-5-ENABLED: IDS Signature is loaded and enabled
    User Access Verification
    Username: Cisco
    Password:
    CenterHall>

  • ITunes 1.6 and Windows Vista 64bit Help

    I have not been able to use iTunes properly since I got a new computer with Vista 64bit. I can play music, browse iTunes Store and watch Video, but the problem comes when I try to attach my iPod Touch or try burning a CD. With the last version, it seemed that 64bit windows Vista was not supported so I just decided to wait for an upgrade. I download iTunes 1.6 from Apple.com and try to install and it says I need the 64bit iTunes Installer. Did I miss the download for it?
    This is the error message I get...
    This iTunes Installer is intended for 32-bit versions of Windows. It is Highly recommended that you download and install the 64-bit iTunes Installer instead.
    All I need is a Link to the 64-bit Installer because I cant find it.

    What's supposed to happen is that when you go to the download page, http://www.apple.com/itunes/download, it's supposed to recognize that you're running 64 bit Vista and then you get the 64 bit iTunes installer. But I've seen reports that FireFox users are only getting the 32 bit installer page.
    Can you try that link with IE? And do you get a different installer then?

  • Itunes 7.7 and windows Vista not working!

    Hello,
    I have been plagued with iTunes and Vista problems ever since i got it on my Pc over 9 months ago!!
    I had hoped that a multimillion company like apple most successful in this nich of the market would want to keep its customers and provide us with up to date valid software but NO..... 9moths later same problem!
    Every time i uninstall and install a newER verson of iTunes i get the following sequale of errors:
    1. Firstly a box appears with a sliding bar with " Please wait while windows configures iTunes "
    2. When this finsihed another box appears " iTunes stopped working "
    3. When u click OK (the only option) in the task bar on the bottom right a small bubble appears with the statment " Data execution prevention has closed iTunes "
    Now i have been battling with this problem for some time and have tried many things like changing version of iTunes (clean uninstall and new install etc)
    I have also located that if i try to start up Quicktime i get the same error box this time reading " Quicktime has stopped wotking "
    I have uninstalled Quicktime and installed a new clean copy to no avail.....
    Appart from throwing my iPod in the Thames and getting a samsung mp3 player, i dont see any solution... anyone have any ideas?
    My Thanks in advance!

    Vwsurfbum
    iTunes is a free program - it doesn't make good business sense for Apple to hire people to troubleshoot problems on Windows hardware - they'd have to hire hundreds, if not thousands to remote in to PCs and spend time fixing this kind of thing!
    If you are getting that message about data execution prevention, you need to get DEP turned off, come **** or high water.
    How about turning off UAC, can you even do that?
    And with UAC turned off, can you disable DEP?
    How to Disable UAC
    Remember you can always turn these back on to keep your system "safe" - this is just a test to get iTunes working.
    And give yourself FULL control over the itunes folders , while you're at it:
    How to Take Ownership and Grant Permissions in Windows Vista

  • ITunes 8.1 and Windows Vista...

    I recently made the "upgrade" to Windows Vista, and iTunes 8.1, after getting my iPod repaired.
    I'm having serious issues syncing my 30GB iPod video with iTunes.
    I have gotten either a BSoD or and error reading "The iPod 'xx' cannot be synced. The required file cannot be found."
    I've done some reading up and found that Vista has been having problems with the latest iTunes.
    Is anyone else facing this problem, and can it be helped?
    I'm seriously getting frustrated.

    I am having the same problem. I have a brand new HP Pavillion laptop, about 24 hours now, and I cannot get itunes to show either my ipod or my iphone. When I plug in my ipod, it does show on the ipod that it is syncing, but nothing is showing up in itunes. My iphone shows nothing, not even that it is powering. I know the computer has something to do with it, as every time I plug in my phone, the computer says it has to download the driver, even if it just did five seconds ago. If anyone is having this problem, or has had it and can resolve it, please help.
    Thank you.

  • Syncing my ipod (itunes 7.1 and windows vista)

    Everytime I try to sync my ipod it says that I do not have enough write access and to check the permissions on my music folder. I am the computer administrator of course on my own computer and I've made it so all my music files are shared and all permissions are allowed. However it still says the same thing everytime, no music or videos will upload. So if anyone knows how to fix this or has had the same problem who has windows vista please help me.
    -thanks
    Dell XPS 400     Windows Vista Home Premium

    I think the problem is that if you have songs that are not in the itunes folder and they are in the root music folder in vista these are the songs that still have the WinXP file path for the songs listed in itunes. All my songs in the that folder had the WinXP file path. I changed them to AAC format and it put them in the itunes folder and they now have the right file path and that solved the write access error that I was having. I was able to upload all my songs after that.

Maybe you are looking for