Need some help re: OS 9, OS X 10.2 and Leopard on PowerBook
I have begun experimenting with a Titanium PowerBook G4 I have that I hadn't used in years. It had Jaguar and OS 9 installed originaly and I recently upgraded to Leopard. I then decided that I wanted to see what OS 9 was like so today, I partitioned the hard drive, hoping to reinstall Jaguar and OS 9 as well as Leopard. I got as far as reinstalling Jaguar with all of its updates and restoring OS 9 and have a few questions.
In System Preferences, I selected OS 9 as the startup disk and now I can't boot to Jaguar. I've tried holding down the Option key while starting and I get a screen with an icon of the hard drive in the center, a right-facing arrow to the right and what looks like the reload arrow to the left. Clicking on the right-facing arrow loads OS 9. Clicking on the hard drive icon or the other arrow does nothing. Any suggestions?
Also, can I boot from the Leopard disc and install Leopard on the partition I created for it? I don't see why not but I thought I'd ask before trying. Also, if the answer is "no," can I delete that partition using the Jaguar installation disc without losing anything on the partition I created for Jaguar?
Finally, while I don't anticipate using the computer for internet surfing very often, I'd like a more user-friendly browser than the old version of Explorer that installs with OS 9. Any suggestions?
Thanks in advance for any suggestions you might have.
Amy
In System Preferences, I selected OS 9 as the startup disk and now I can't boot to Jaguar. I've tried holding down the Option key while starting and I get a screen with an icon of the hard drive in the center, a right-facing arrow to the right and what looks like the reload arrow to the left. Clicking on the right-facing arrow loads OS 9. Clicking on the hard drive icon or the other arrow does nothing. Any suggestions?
That's normal behavior.
Holding down the Option key at startup brings up Startup Manager. Startup Manager is able to show only one OS for any given volume. And, for a volume with two OS's on it, such as Jaguar and OS 9, it will show (make available for selection) only the last one of those two which was used for booting. Hence, in this instance it is locked into OS 9 for that volume.
OS 9's Startup Disk control panel (Apple menu > Control Panels > Startup Disk) should allow you to select OS X as the boot OS for the next startup.
You should also be able to hold down the X key during startup to force a boot into OS X. Press the X key about the time the startup chimes sound, keep it held down until OS X has started to boot. Note - this is a one-off instruction, meaning on the next boot it will auto-select OS 9 again unless you force it to use OS X or change the setting in Startup Disk.
This restriction in Startup Manager is one reason many folk partition their drive so they can have OS 9 on a separate partition (a partition = a volume). This allows each of the volumes, one with OS X and one with OS 9, to appear in Startup Manager, each selectable.
If you have an original PB G4, and the OS 9 version is OS 9.1, then you may nott be able to select OS Xin its Startup Disk control panel. The solution for that is to replace just that control panel with a newer one, which you can get here -
http://support.apple.com/kb/DL1111
If you have a later model PB G4, the OS 9 installer may be part of a combination installer, one which boots to OS X. This installer will insist upon installing OS 9 only onto a volume which already contains OS X. In order to get OS 9 onto its own partition in this instance, install it onto the OS X partition, then drag and drop copy it to its own partition. After verifying the validitiy of the copied OS (usually by booting to it), the original on the OS X partition can be thrown away.
Similar Messages
-
Hello need some help on a few things with email sending and rec.
I have had my bb for a while but am only now really trying to utilize it for more. I am able to access my yahoo and gmail accounts on it and sync. However when I tried to import my address book from sbc or tried to add the blackberry email I have run into problems. It will let me send an email on the bb using the bb email address however I have no idea where it ends up on the desktop though. I can't send out anything on the outlook from either account. I am very frustrated to say the least. The only reason I am wanting to get the bb email set up as there are thousands of items on the outlook that tell you don't remove from the outbox. Hope that some of this makes sense. Thanks Carla
I have a curve 8310
Message Edited by CarlaVM on 09-12-2009 08:52 PMWelcome to the forums CarlaVM
I am a little confused by your post. Could you please clarify a little better.
If I understand correctly, you have added yahoo and gmail accounts to the blackberry so that it receives email's from those accounts on to your phone.
What is "sbc" that you are trying to import your address book from? And expand on why you can't add the "blackberry email" (is this the email that says [email protected]?)
If you send email using your blackberry account ([email protected]) the sent email is only stored on your phone (and nowhere else). I would send emails using either your yahoo or gmail email account so that it will save a copy in your email accounts as a backup.
I don't understand what you mean by sending from outlook? What does this have to do with the phone?
Take a look at this section of the forums for tips and tricks: http://na.blackberry.com/eng/support/blackberry101/#tab_tab_curve
I am a little confused by your wording so if you can clarify further I'm sure I, or somebody else, will be able to help you further.
Cheers
Kijana
Please remember to:
1. Mark Accept as Solution on the appropriate post once your issue has been resolved
2. Give Kudos to helpful posts (click the star next to the post)
Thanks -
i bought a movie on itunes from my iphone and now im trying to watch the movie in my mac and its not showing on my purchase list on my mac itunes
anyone can give me a help?Did you purchase the movie or rent it? If you rented it, it cannot be transferred from your iPhone.
If you purchased it, are you sure you're using the same Apple ID on your Mac as you are on your iPhone? If not, you would be trying to watch a movie owned by someone else. -
//Meny
Console.WriteLine("\n HÄNGA GUBBE\n");
Console.WriteLine(" 1) Lägg till ord");
Console.WriteLine(" 2) Lista alla ord");
Console.WriteLine(" 3) Spela");
Console.WriteLine(" 4) Avsluta");
int valet;
Console.Write("\n\tVälj 1-4: ");
valet = int.Parse(Console.ReadLine());
switch (valet)
case 1:
Console.WriteLine("\n lägg ett till ord! ");
break;
case 2:
Console.WriteLine("\n Lista med alla ord :\n");
char[] array = { 'lev', 'skratta', 'gledje', 'gråt', 'njut'};
Array.Sort<char>(array);
foreach (var c in array)
Console.WriteLine(c);
Console.WriteLine("\n");
//List<string> list = new List<string>();
//Random r = new Random();
break;
case 3:
string guesses, bokstäver;
Console.Write("\n Hur många fel får man ha? ");
guesses = (Console.ReadLine());
Console.WriteLine(" Utmärkt, då spelar vi!\n");
Console.WriteLine(" Felgisningar :" + "0/" + guesses);
Console.Write(" Gissade bokstavär: \n" );
bokstäver = (Console.ReadLine());
Console.WriteLine("Aktuel ord");
Console.WriteLine("Gissa bokstav : "+bokstäver+" \n");
break;
case 4:
Console.WriteLine("\n HEJ DÅ! \n");
Console.Beep();
break;
//avbryter while loopen, avslutar speletYou can do it like this;
var text = Console.ReadLine();
if(array.Contains(text)) // if exists do what ever you want
Please mark it correct if you find the answer helpful and please start a new thread if you have another question. Thanks. -
Ok i have indesign CS6 and all files are stored on a 10.7.5 MAC server. This just started happening. When I open a file indesigns is creating a textfile in the same folder? I need some help on this.
Ask in the ID forum and be much more specific about your configuration. there could be any number of reasons why manifests, temp files or restore files are created.
Mylenium -
Bt infinity way to slow !!! Need some help
We just got bt infinity 1 installed with home hub 5 as well, I did a speed test and it was only getting 10mbps download, 5 Mbps upload and 85 ping, is this good or bad. We currently have 10 devices connected to internet in this house, I can't even watch normal you tube videos in 480p, this is annoying as paid a lot of money for it, I know the problem can rely down to the amount I people connected, it may be also down to where the router is ? Need some help to how we can get best performance and how to share the connection between all of us or how to get more as on the best package available ? Thanks will need all the help as the internet is atrocious right now, almost as bad as our non infinity by home hub 2 we had a few days ago
Can you run this checker and post back a screen shot of the results
http://www.dslchecker.bt.com/adsl/adslchecker.welcome
and use this speed tester then carry out the further diagnostics and post back a screen shot of all the results including your IP profile for up and down. This test must be done with a wired connection.
http://speedtest.btwholesale.com/
As you have a Homehub 5 can you also post the stats from 1-12 by logging onto the homehub management pages then troubleshooting > helpdesk. http://bthomehub.home/ -
Remote App on iPad connects but drops after about 20 mins. Need to turn off wait about 1 minute, then turn on wifi on iMac before it can reconnect. Need some help please.
Already gone through troubleshooting guide a zillion times. Thanks.This worked for me... A little time consuming but once you get rolling it goes GREAT... Thanks....
I got my artwork and saved it to my Desktop
Opened up Microsoft Paint and clicked on "File" and "Open" and found it to get it on the screen to resize it
Clicked "resize" and a box for changing it opened up
Checked the box "Pixels" and "Unchecked maintain aspect ratio"
Set Horizontal for 640 and Vertical for 480
Clicked on "OK" and went back to "File" and did a "Save As" and chose JPEG Picture
It came up "File Already Existed" and clicked "OK" (really did not care about the original artwork I found because wrong size)
Went to iTunes and on the movie right clicked on "Get Info", clicked on "Details", then "Artwork"
Go to the little box on the top left that shows your old artwork and click on it to get the little blue border to appear around it and hit "Delete" to make it gone
Click on "Add Artwork" and find it where you put the one from above on your Desktop and hit "Open" and OK and your new artwork is now there and all good.
Sounds like a lot of steps to follow but after around 5 or so you will fly through it. This worked perfect on my iPhone 6 Plus and I have artwork on my Home Videos now. -
TS1702 I need some help the apps were downloading slowly
The apps downloaded but it didn't cause it's stuck in downloading mode what should I do?
The iOS 6 update didn't work.
Please I need some help.
The apps didn't download.
Talking Angela and Ginger didn't download.
Talking Santa didn't update.Try moving the existing backup file to a safe location so that iTunes has to create an entire new file. The backup file is located here. You can delete that backup once you get a successfull backup.
iTunes places the backup files in the following places:
Mac: ~/Library/Application Support/MobileSync/Backup/
Windows XP: \Documents and Settings\(username)\Application Data\Apple Computer\MobileSync\Backup\
Windows Vista and Windows 7: \Users\(username)\AppData\Roaming\Apple Computer\MobileSync\Backup\
Note: If you do not see the AppData or Application Data folders, you may need to show hidden files (Windows XP, Windows Vista and Windows 7), or iTunes may not be installed in the default location. Show hidden files and then search the hard drive for the Backup directory. -
Need some help: my itunes won't sync with my iphone anymore. Both softwares are up to date and I've reinstalled itunes. After I reinstall, it syncs. But then when I reboot my computer, it no longer syncs anymore and I have to keep reinstalling itunes. Thoughts???
thought that it was possible to have the same iTunes library on any machine that was authorised, a kind of cloud-iTunes I guess.
That would convenient, but sadly it is not the case. Sorry!
Either way your welcome and best of luck!
B-rock -
Need some help in creating Search Help for standard screen/field
I need some help in adding a search-help to a standard screen-field.
Transaction Code - PP01,
Plan Version - Current Plan (PLVAR = '01'),
Object Type - Position ( OTYPE = 'S'),
Click on Infotype Name - Object ( Infotype 1000) and Create.
I need to add search help to fields Object Abbr (P1000-SHORT) / Object Name (P1000-STEXT).
I want to create one custom table with fields, Position Abb, Position Name, Job. Position Abb should be Primary Key. And when object type is Position (S), I should be able to press F4 for Object Abb/Object Name fields and should return Position Abbr and Position Name.
I specify again, I have to add a new search help to standard screen/field and not to enhance it.
This is HR specific transaction. If someone has done similar thing with some other transation, please let me know.
There is no existing search help for these fields. If sm1 ever tried or has an idea how to add new search help to a standard screen/field.
It's urgent.
Thanks in advace. Suitable answers will be rewardedHi Pradeep,
Please have a look into the below site which might be useful
Enhancing a Standard Search Help
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/daeda0d7-0701-0010-8caa-
edc983384237
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ee93446011d189700000e8322d00/frameset.htm
A search help exit is a function module for making the input help process described by the search help more flexible than possible with the standard version.
This function module must have the same interface as function module F4IF_SHLP_EXIT_EXAMPLE. The search help exit may also have further optional parameters (in particular any EXPORTING parameters).
A search help exit is called at certain timepoints in the input help process.
Note: The source text and long documentation of the above-specified function module (including the long documentation about the parameters) contain information about using search help exits.
Function modules are provided in the function library for operations that are frequently executed in search help exits. The names of these function modules begin with the prefix F4UT_. These function modules can either be used directly as search help exits or used within other search help exits. You can find precise instructions for use in the long documentation for the corresponding function module.
During the input help process, a number of timepoints are defined that each define the beginning of an important operation of the input help process.
If the input help process is defined with a search help having a search help exit, this search help exit is called at each of these timepoints. If required, the search help exit can also influence the process and even determine that the process should be continued at a different timepoint.
timepoints
The following timepoints are defined:
1. SELONE
Call before selecting an elementary search help. The possible elementary search helps are already in SHLP_TAB. This timepoint can be used in a search help exit of a collective search help to restrict the selection possibilities for the elementary search helps.
Entries that are deleted from SHLP_TAB in this step are not offered in the elementary search help selection. If there is only one entry remaining in SHLP_TAB, the dialog box for selecting elementary search helps is skipped. You may not change the next timepoint.
The timepoint is not accessed again if another elementary search help is to be selected during the dialog.
2. PRESEL1
After selecting an elementary search help. Table INTERFACE has not yet been copied to table SELOPT at this timepoint in the definition of the search help (type SHLP_DESCR_T). This means that you can still influence the attachment of the search help to the screen here. (Table INTERFACE contains the information about how the search help parameters are related to the screen fields).
3. PRESEL
Before sending the dialog box for restricting values. This timepoint is suitable for predefining the value restriction or for completely suppressing or copying the dialog.
4. SELECT
Before selecting the values. If you do not want the default selection, you should copy this timepoint with a search help exit. DISP should be set as the next timepoint.
5. DISP
Before displaying the hit list. This timepoint is suitable for restricting the values to be displayed, e.g. depending on authorizations.
6. RETURN (usually as return value for the next timepoint)
The RETURN timepoint should be returned as the next step if a single hit was selected in a search help exit.
It can make sense to change the F4 flow at this timepoint if control of the process sequence of the Transaction should depend on the selected value (typical example: setting SET/GET parameters). However, you should note that the process will then depend on whether a value was entered manually or with an input help.
7. RETTOP
You only go to this timepoint if the input help is controlled by a collective search help. It directly follows the timepoint RETURN. The search help exit of the collective search help, however, is called at timepoint RETTOP.
8. EXIT (only for return as next timepoint)
The EXIT timepoint should be returned as the next step if the user had the opportunity to terminate the dialog within the search help exit.
9. CREATE
The CREATE timepoint is only accessed if the user selects the function "Create new values". This function is only available if field CUSTTAB of the control string CALLCONTROL was given a value not equal to SPACE earlier on.
The name of the (customizing) table to be maintained is normally entered there. The next step returned after CREATE should be SELECT so that the newly entered value can be selected and then displayed.
10. APP1, APP2, APP3
If further pushbuttons are introduced in the hit list with function module F4UT_LIST_EXIT, these timepoints are introduced. They are accessed when the user presses the corresponding pushbutton.
Note: If the F4 help is controlled by a collective search help, the search help exit of the collective search help is called at timepoints SELONE and RETTOP. (RETTOP only if the user selects a value.) At all other timepoints the search help exit of the selected elementary search help is called.
If the F4 help is controlled by an elementary search help, timepoint RETTOP is not executed. The search help exit of the elementary search help is called at timepoint SELONE (at the
F4IF_SHLP_EXIT_EXAMPLE
This module has been created as an example for the interface and design of Search help exits in Search help.
All the interface parameters defined here are mandatory for a function module to be used as a search help exit, because the calling program does not know which parameters are actually used internally.
A search help exit is called repeatedly in connection with several
events during the F4 process. The relevant step of the process is passed on in the CALLCONTROL step. If the module is intended to perform only a few modifications before the step, CALLCONTROL-STEP should remain unchanged.
However, if the step is performed completely by the module, the following step must be returned in CALLCONTROL-STEP.
The module must react with an immediate EXIT to all steps that it does not know or does not want to handle.
Hope this info will help you.
***Reward points if found useful
Regards,
Naresh -
Need some help in debugging this exported script
Below is DDL generated by visio forward engineering tool . The example below consists of 2 test tables with one foreign key.
Forward engineering generated DDL script
IF EXISTS (SELECT * FROM sys.objects WHERE object_id = OBJECT_ID(N'[dbo].[Table1]') AND type in (N'U'))
DROP TABLE [dbo].[Table1]
GO
CREATE TABLE [dbo].[Table1] (
[test] CHAR(10) NOT NULL
, [test2] CHAR(10) NULL
GO
ALTER TABLE [dbo].[Table1] ADD CONSTRAINT [Table1_PK] PRIMARY KEY CLUSTERED (
[test]
GO
GO
IF EXISTS (SELECT * FROM sys.objects WHERE object_id = OBJECT_ID(N'[dbo].[Table2]') AND type in (N'U'))
DROP TABLE [dbo].[Table2]
GO
CREATE TABLE [dbo].[Table2] (
[test2] CHAR(10) NOT NULL
GO
ALTER TABLE [dbo].[Table2] ADD CONSTRAINT [Table2_PK] PRIMARY KEY CLUSTERED (
[test2]
GO
GO
ALTER TABLE [dbo].[Table1] WITH CHECK ADD CONSTRAINT [Table2_Table1_FK1] FOREIGN KEY (
[test2]
REFERENCES [dbo].[Table2] (
[test2]
GO
GO
When i converted this DDL script using scratch editor the migration tool gave some errors can anyone help me to resolve below
DECLARE
v_temp NUMBER(1, 0) := 0;
BEGIN
BEGIN
SELECT 1 INTO v_temp
FROM DUAL
WHERE EXISTS ( SELECT *
FROM objects
WHERE OBJECT_ID_ = NULL/*TODO:OBJECT_ID(N'[OPS].[Table1]')*/
AND TYPE IN ( N'U' )
EXCEPTION
WHEN OTHERS THEN
NULL;
END;
IF v_temp = 1 THEN
TRUNCATE TABLE Table1;
END IF;
END;
CREATE TABLE Table1
test CHAR(10) NOT NULL,
test2 CHAR(10)
ALTER TABLE Table1
ADD
CONSTRAINT Table1_PK PRIMARY KEY( test );
--SQLDEV:Following Line Not Recognized
DECLARE
v_temp NUMBER(1, 0) := 0;
BEGIN
BEGIN
SELECT 1 INTO v_temp
FROM DUAL
WHERE EXISTS ( SELECT *
FROM objects
WHERE OBJECT_ID_ = NULL/*TODO:OBJECT_ID(N'[OPS].[Table2]')*/
AND TYPE IN ( N'U' )
EXCEPTION
WHEN OTHERS THEN
NULL;
END;
IF v_temp = 1 THEN
TRUNCATE TABLE Table2;
END IF;
END;
CREATE TABLE Table2
test2 CHAR(10) NOT NULL
ALTER TABLE Table2
ADD
CONSTRAINT Table2_PK PRIMARY KEY( test2 );
--SQLDEV:Following Line Not Recognized
ALTER TABLE Table1
ADD
CONSTRAINT Table2_Table1_FK1 FOREIGN KEY( test2 ) REFERENCES Table2 (test2)
--SQLDEV:Following Line Not Recognized
;Pl do not post duplicates - Need some help in debugging this script
-
working on a music video that needs some help. I own Final Cut and Color. Done the edit and it looks great but it needs help polishing and I have no idea what to do. Planning on showing the video this friday night in hollywood and I want it to blow people away. Is there anyone in the area would be willing to help? Please contact me ASAP. Thanks Ray
if you can give me a call that would be best, I can tell you what I need to accomplish. Thanks
818 935 5079 -
Need some help in ARCHITECTURE level for upgrading SAP BW 3.5 to SAP BI 7.0
HI all,
I am a consultant in a small company, i am curently handling upgradation project i need some help in ARCHITECTURING this complete project, please share me your knowledge, like process flows what information i need to get from clients before starting the project, what is pre upgradation checks, post upgradation cheks ...............
Thanks in advance.............Hi,
You need to confirm the downtime during the upgrade activity.
Check for Space and resource allocation.
http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/8d1a0a3a-0b01-0010-eb82-99c4584c6db3
https://wiki.sdn.sap.com/wiki/display/BI/UpgradefromBW3.XtoBI7.0+%28SP13%29
https://wiki.sdn.sap.com/wiki/display/BI/Migrationof3.xobjectstoBI7.0
You need to make sure some OSS notes should be applied, check the below link for the same:
https://wiki.sdn.sap.com/wiki/display/BI/UpgradetoNetWeaverBI7.0%28SAPNotes+%29
http://wiki.sdn.sap.com/wiki/display/BI/BIUpgradation-HelpfulOSSnotesfromEDWperspective
Hope this helps...
Rgs,
Ravikanth. -
Need Some help in Developing an ALV report ..Plz help me
Hi Experts I am basic learner to ABAP Here I need some help in developing a Delivery *** Invoice Report....Please help me by spending a little time..
Tables are VBAK VBAP LIPS LIKP and Document floe table is VBFA
SELECT VBELN VKORG VTWEG SPART
FROM VBAK
INTO TABLE I_VBAK
WHERE VBELN IN S_VBELN.
IF I_VBAK IS NOT INITIAL .
SELECT VBELN POSNR MATKL POSAR WERKS
FROM VBAP
INTO TABLE I_VBAP
FOR ALL ENTRIES IN I_VBAK
WHERE VBELN = I_VBAK-VBELN.
ENDIF.
IF I_VBAP IS NOT INITIAL.
SELECT * FROM LIPS
INTO CORRESPONDING FIELDS OF TABLE I_LIPS
WHERE VGBEL = VBAP-VBELN
AND VGPOS = VBAP-POSNR.
ENDIF.
IF I_LIPS IS NOT INITIAL.
SELECT VBELN VSTEL VKORG KUNNR
FROM LIKP
INTO TABLE I_LIKP.
ENDIF.
Moderator message : Outsourcing is not allowed, don't expect others to correct your source code. Thread locked.
Edited by: Vinod Kumar on Aug 1, 2011 5:43 PMhi ,
Look in this link
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/b3/0ef3e8396111d5b2e80050da4c74dc/frameset.htm">http://help.sap.com/saphelp_nw04/helpdata/en/b3/0ef3e8396111d5b2e80050da4c74dc/frameset.htm</a>
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/21/894eeee0b911d4b2d90050da4c74dc/content.htm">http://help.sap.com/saphelp_nw04/helpdata/en/21/894eeee0b911d4b2d90050da4c74dc/content.htm</a>
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/80/1a62bfe07211d2acb80000e829fbfe/content.htm">http://help.sap.com/saphelp_nw04/helpdata/en/80/1a62bfe07211d2acb80000e829fbfe/content.htm</a>
Regards
Renjith Kumar -
Need some help in saving video message from viber to my Iphone 5S with new ios 8's program . I disabled the thing that would save photos and videos automatically then, there comes a video I want to save. After loading and watching it, I press the "save to gallery" thing but it doesn't save in gallery. I tried all, restarting my phone, rebooting then turning on the save automatically thing and when I watch it again, it still wouldn't save.
Probably a good question to ask Viber or look at their support site.
Maybe you are looking for
-
[FI] Substitution PA object data
Hi, would appreciate your input concerning following problem: I've created a CO substitution, using formpool ZGBBS000, PA Object only "by EXIT". The program determines the desired entries for field producthierarchy, Sales Org. and Sales Group. The qu
-
MacBook Air circa June 2012 memory where did it go.
I boot up my MacBookAir 4 GB Ram and when i get to the desktop I rarely have 2 GB of ram free. Where is the ram going and can I get it back? Thank you.
-
Nokia PC Suite new version 7.1.180.64
Looks like there is a new version of Nokia PC Suite available today: 7.1.180.64. Is there a change log anywhere?
-
RE: Transformation and Data transfer process.
Hi guys, Please some bosy help me out by providing the differences between Transformation and Data Transfer Process. thanks in adwance omkar
-
How can I re-install i-Cal?
My i-cal is mutilated from the beginning after installation of Mac OS X 10.7.3