Need some help scripting a specific menu animation, please

I have this Actioscript 2 file here (see attached).
I have the animation performing ok in the file, but I am having trouble getting the movie clip to play on mouseover. I could really use some advice on this... I've been through a number of tutorials, but cannot get this file to play nice.
On mouseover, the menu should animate down (play the clip). This brings up another question, however... How do I get the menu to receed (animate up) when the cursor leaves the button region?
Thanks in advance for any help you all can provide!

They will need to be workable links eventually - right now, the text is not even correct.
The buttons are created, but they are not set up to link yet - I had wanted to see if I could get the mouseover on and off working first.

Similar Messages

I NEED SOME HELP WITH UPDATING MY IPOD TOUCH PLEASE

i need some help with my ipod the version is 3.1.3 and every time I'm trying to update it says it can not be restored then it says unknown error so i need some help updating my ipod to version 4.2

If you mean you're trying to update your ios go to settings/general/software update. then you should see the latest ios just tap it and it will automatically update your ipod. If you're trying to restore your ipod (as it's not quite clear in your query) try doing it through itunes instead of on the device itself

Need some help with security sandbox stuff asap please

hey guys... so im trying to do a swfLoader call to a swf on a server from my actionscript on my local machine, when i do that i get the security sandbox violation error.... i tried adding a crossdomain.xml file to the server that has the following code in it
<cross-domain-policy>
     <site-control permitted-cross-domain-policies="master-only"/>
     <allow-access-from domain="*"/>
     <allow-http-request-headers-from domain="*" headers="SOAPAction"/>
</cross-domain-policy>
and in my actionscript on application initialize i do
initialize="init(); Security.loadPolicyFile('http://myServer.com/crossdomain.xml')"
i also do
Security.allowDomain("http://myServer.com");
any ideas???? oh and i also went to this website http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager04a.ht ml and set the always allow trust locations to "/"
any ideas on how i could possible fix this problem?? ive been trying to get around this problem for the last 2 days!!
please help!!!!

Hi,
Please use policy file logging to check the exact error. This should shed some light on the problem.The procedure is detailed here.
http://www.adobe.com/devnet/flashplayer/articles/fplayer9_security_05.html
Nishad

Need some help. The top menu bar disappears when in an app...?????

I recently came across a problem that when I go into an application, for example MAIL, the above menu bar disappears. I am not able to access anything that would be in the above MAIL menu bar. I am still able to write/send/check mail but if I wanted to edit or change something the bar is not there. When I minimize MAIL or any other application I'm in and click on the desktop then the finder menu bar appears again. I'm not sure how to fix this...Thanks for any help someone can offer.

Try restarting the Mac and see if that helps.

Alright I give! I need some help with groups/busses and more please..

Hi all,
Well, its now been a few weeks of my off and on testing with my new Logic Rig, I have every plug I can transfer over to UB that I can and now am trying to get deeper into things.
First I struggled with learning the environment (I still dont get it fully) but now I am really confused about group and fx tracks.
- Am I missing something or is everything just a buss turned into a group? This also included creating an FX track?
If this is the case then its not nearly as complex as I think it is but I cant figure certain things out with the way logic handles naming in regards to its busses.
Lets say I want to create a sidechain group. I take an audio track change it to represent buss (1), I then rename buss 1 to SC-GROUP, now any window that I drop down to find the newly names SC-GROUP always remains named as buss (1). This even happens when I rename the buss direct from the audio environment.
I must be missing something, whats been confusing the heck out of me is that no matter how I try and name things they always remain their original names in any menues as the example of the buss (1), so how do I rename these channels so I can clearly know exactly where I am routing audio?
So lets summarise where I am lost so far hehe.
1. Are groups really just empty busses renamed to act as a group?
2. How can I rename a buss/group and be able to see the renamed channel in the menues.
and for the 3rd new question of sorts...
3. FX Sends, again is this just a buss that has an AU inserted into its channel and then rout the insert of an additional audio channel to the buss with the FX inserted?
and now my last uestion of the day if I have not confused you to death so far
Why is it that when I add a AU lets say battery as instrument 1, when I add another in the window and I rerout an instrum,ent track the next AU shows up at the bottom of the list instead of inst. 2?
If I am not explaining myself clearly enough for any of my examples let me know so I can try to better represent my questions. I am still so new to Logic and still have yet to get the bulk of the simple operations down just yet..
Thanks again for all your asistance!

Thank you guys,
So if I understand right, a sub buss is nothing more than a routing the output of a few channels to a buss to control a few aspects like I had mentioned compressing an entire group of tracks EG: a drum buss (in this situation a drum sub buss?).
So I will have to reffer to the manual again to read the details on an actual group since it does seem there is a difference EG: the group can actually manipulate the faders of channels routed to the group?
FX busses seem to be just that, slap an FX info either and AUX channel or a buss and then set the insert of that AUX or buss desired.
The reason I asked about naming is that lets say I have 6 effects tracks I wish to use lets say as an example AUX1=Short Delay, AUX2=Long Filter Delay, AUX3=Slap Verb, AUX4=Long Verb and so forth.
When I go to actually use these inserts I need to assume I know exactly what AUX I assigned each effect to, if I could simply rename this AUX track to refference the effect it would make so much more sense then trying to remember what AUX5 was.
In regards to my last question here is a bit more of a detailed explanation, please bare with me as I am not in front of my computer.
1. I add battery into Audio Instrument-1
2. I then configure my environemt to use my AUXs I already have inplace for audio routing.
3. I then edit the Audio window create the midi for a new multi-instrument.
4. I come back to the main arrange window and hold-click on the next available audio-instrument and in the instrument window battery will be instrument 1 out of how ever many blanks apear EG:25+
5. Now I go to add lets say Stylus RMX into the next available mutli audio instrument. I then repeat steps 2,3,4.
Now when I get to step 4 this time instead of audio instrument 2 from the lint being Stylus it shows up as the last possible instrument in the drop list that appears under audio instrument from hold-click on the audio-instrument track.
Its just odd, it should be instrument 2, but instead it shows up as the last possible choice.
Maybe I am doing something wrong, even sometimes when I grab on of batteries midi tracks and create next object I will get a random audio track in there out of no where, or maybe its just a bug with battery.
Any ideas? If I still am not describing this right, I will post a step by step this eve of exactly the steps I am taking.
Thanks again, this forum has been very helpful in getting me going with the questions I just cant seem to get around from my Nuendo work flow.
Cheers!

I need some help with AVI and IDX files please.

Hello there,
I've just been given a hard drive with a load of media on it that I need to work with in FCP.
There's a folder with many .AVI clips, and each clip has an accompanying directory file with the extension .IDX
The format of the AVI files is DV, 720x576, 48kHz.
For the life of me, I can't get FCP to accept the media. Log and Transfer won't accept them, and if i bring in the AVI files in on their own using File>Import>Files... I get a message saying:
Media Performance Warning
It is highly recommended that you either recapture the media or use the Media manager to create new copies of the files to improve their performance for multi-stream playback.
I can click 'OK' for this message and the media will appear in the browser, but If I place one of these AVI files on a new conformed sequence, the audio needs rendering. (Sequence settings correspond to media settings)
I tried just changing the wrapper from AVI to MOV, thinking I could fool FCP into accepting them, but I get the same rejection.
I thought the audio and video signals might be muxed, so I tried MPEG Streamclip to sort that out, but even MPEG Streamclip doesn't accept the media, saying : File open error: Can't find video or audio tracks.
Could anybody advise me on how to get the most out of these media files please?
Thanks in advance.
James.
Message was edited by: James M.
Message was edited by: James M.

yes. I tried transcoding in QT, but they still come in with the same audio rendering required. I'm a bit loath to convert them all though, as there are 1400 clips.
It's not a huge problem, as they do play in FCP, but I'd like to sort out the audio rendering. I don't understand why it needs rendering as the media and sequence audio settings match, and it's not some weird format or anything, it's bog standard 48kHz stereo.

I need some help setting up a WiFi printer please

Firstly, apologies for the long post but I’m really struggling with this one.
I live in France and am trying to get wifi printing working on a friend’s Intel iMac (OSX Tiger 10.4.11) connected to a Lexmark X4875 printer. She’s connecting to the internet via Airport using a Livebox router, no problems. I’ve set up the printer to work wifi and that all 'appears' to be successful with the wifi light going to green as it should. I’ve also ‘associated’ the printer with the router by pressing the association button on the Livebox at the time of set-up and the printer is registered with the Livebox with correct MAC id.
So far everything looks like it should work until I go ‘Add Printer’ and the wifi printer is never seen (no problems if connected via USB). I’ve reset the printer erasing all print settings and starting again, done numerous restarts of all devices and still no go.
I should add that I have set up many wifi printers previously and even had this one working previously for over a year - it’s just that she had to get a new Livebox recently and now I can’t get it to work.
I realise that not everybody will be familiar with the Livebox although they are common anywhere Orange operates as an ISP but I’m hoping that someone will have some nugget of information that will help me get this sorted.
Thanks in advance for any advice, Paul.

Bump! Anyone?

Need Some Help with Internet Explorer...Please

HI ...
I have one site that I use for work that I am not able to get on from home because I am Mac based.
It says I can only recognizes Internet Explorer.
Is there a way around this that doesn't involve me having to purchase Windows? It's the only site I need if I work from home, if I have to buy something, ok, but would rather see if there is another way.
Thank you for the help!!
DR

Internet Explorer is part of the Windows Operating System. In order to get Internet Explorer you must install Windows either using Bootcamp Assistant or using a Virtual Machine like Parallels, Fusion, or VirtualBox.

I need some help with my new podcast. Please!

I've just set up a new podcast and it's online on itunes. The xml file is hosted on my website. Can i edit the text within this file...i.e. if there is a spelling mistake...ping this...and itunes will update it? Cos i tried doing that but no changes were made...any ideas?
Also, to generate my xml file, i used this website
http://www.podcastblaster.com/podcast-feed/index.php
However i noticed that feedburner allows you to collate statistics on subscribers and podcast downloads....how can i switch to feedburner? i find this all so confusing. does anyone know what im talking about?

From looking at their site, Podblaster creates the feed file from the data you give it: so it's no good you editing the feed file yourself as Podblaster will over-write it the next time you add an episode. Any changes you make to data or episode in Podblaster will cause an amended version of the feed file to be uploaded and this will eventually be reflected in the itunes Store; it usually takes 1-2 days, occasionally longer, for new episodes to appear in the Store, and it's possible that minor amendments to the texts won't show until you upload a new episode.
To take advantage of Feedburner's statistics facilities you need to submit the feed to Feedburner, and then submit the feed it generates to the iTunes Store. This will involve you either using the procedure detailed here (which involves adding a special tag to the feed - something you may well not be able to do) or submitting this feed as a new podcast to the Store (which will necessitate making a small change to the name).
If you have any further queries please post both the URL of your feed and of the iTunes Store page (please include the http:// in both cases), without which it's possible only to give very general answers.

Need some help on tagging an XML placeholder please

I'm trying to get my image line to have a paragraph style of 'img_stem' attached to the return. But while my placeholder does show that I do have that para style, when I import the xml, the para changes to the style 'Stem_Text.' Can anyone tell me what I may be doing wrong here? The 1st picture shows the placeholder text. The 2nd picture shows the xml after importing.
TIA,
Janine

Anyone out there with xml experience that can help?
Thanks

Need some help with Format!!! Please Help

I am all done with editing a wedding and just discovered that half of my project in the beginning is squished. I have black bars on the left and right sides. Basically FCP is not utilizing the extra sceen space on my files. The original footage is normal 3X4 and was captured as such (720X480 DV).
I do not understand why half of my project appears fine and fills the screen, but the first half has been squished and not filling the prject windows fully.
I am using a MacBook Pro, and FC 5.0. Footage was shot in Mini DV on a Sony.
Thanks a ton for any help or advice.
p.s. will attach a screen shot here in a few minutes.
Intel 2.0 Mac OS X (10.4.7) FCP 5.0

Thanks guys for the help. I don't think it was like this while I was editing. That is why I didn't notice it earlier. I let someone watch part of it and it could be that they hit something that changed it.
I found that the aspect ratio was on 12.5 and not O. When I put it to 0 it filled the screen much more, but not completely. But it should be enough to bring the image back to a normal size.
The question is now, is there a way to apply an aspect ratio change of 0 to 100 clips? When I select them all and change it, it only applies to the first clip. It is going to take a long long time to change all of them.

Need some help in ARCHITECTURE level for upgrading SAP BW 3.5 to SAP BI 7.0

HI all,
I am a consultant in a small company, i am curently handling upgradation project i need some help in ARCHITECTURING this complete project, please share me your knowledge, like process flows what information i need to get from clients before starting the project, what is pre upgradation checks, post upgradation cheks ...............
Thanks in advance.............

Hi,
You need to confirm the downtime during the upgrade activity.
Check for Space and resource allocation.
http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/8d1a0a3a-0b01-0010-eb82-99c4584c6db3
https://wiki.sdn.sap.com/wiki/display/BI/UpgradefromBW3.XtoBI7.0+%28SP13%29
https://wiki.sdn.sap.com/wiki/display/BI/Migrationof3.xobjectstoBI7.0
You need to make sure some OSS notes should be applied, check the below link for the same:
https://wiki.sdn.sap.com/wiki/display/BI/UpgradetoNetWeaverBI7.0%28SAPNotes+%29
http://wiki.sdn.sap.com/wiki/display/BI/BIUpgradation-HelpfulOSSnotesfromEDWperspective
Hope this helps...
Rgs,
Ravikanth.

Need some help in debugging this exported script

Below is DDL generated by visio forward engineering tool . The example below consists of 2 test tables with one foreign key.
Forward engineering generated DDL script
IF EXISTS (SELECT * FROM sys.objects WHERE object_id = OBJECT_ID(N'[dbo].[Table1]') AND type in (N'U'))
DROP TABLE [dbo].[Table1]
GO
CREATE TABLE [dbo].[Table1] (
[test] CHAR(10) NOT NULL
, [test2] CHAR(10) NULL
GO
ALTER TABLE [dbo].[Table1] ADD CONSTRAINT [Table1_PK] PRIMARY KEY CLUSTERED (
[test]
GO
GO
IF EXISTS (SELECT * FROM sys.objects WHERE object_id = OBJECT_ID(N'[dbo].[Table2]') AND type in (N'U'))
DROP TABLE [dbo].[Table2]
GO
CREATE TABLE [dbo].[Table2] (
[test2] CHAR(10) NOT NULL
GO
ALTER TABLE [dbo].[Table2] ADD CONSTRAINT [Table2_PK] PRIMARY KEY CLUSTERED (
[test2]
GO
GO
ALTER TABLE [dbo].[Table1] WITH CHECK ADD CONSTRAINT [Table2_Table1_FK1] FOREIGN KEY (
[test2]
REFERENCES [dbo].[Table2] (
[test2]
GO
GO
When i converted this DDL script using scratch editor the migration tool gave some errors can anyone help me to resolve below
DECLARE
v_temp NUMBER(1, 0) := 0;
BEGIN
BEGIN
SELECT 1 INTO v_temp
FROM DUAL
WHERE EXISTS ( SELECT *
FROM objects
WHERE OBJECT_ID_ = NULL/*TODO:OBJECT_ID(N'[OPS].[Table1]')*/
AND TYPE IN ( N'U' )
EXCEPTION
WHEN OTHERS THEN
NULL;
END;
IF v_temp = 1 THEN
TRUNCATE TABLE Table1;
END IF;
END;
CREATE TABLE Table1
test CHAR(10) NOT NULL,
test2 CHAR(10)
ALTER TABLE Table1
ADD
CONSTRAINT Table1_PK PRIMARY KEY( test );
--SQLDEV:Following Line Not Recognized
DECLARE
v_temp NUMBER(1, 0) := 0;
BEGIN
BEGIN
SELECT 1 INTO v_temp
FROM DUAL
WHERE EXISTS ( SELECT *
FROM objects
WHERE OBJECT_ID_ = NULL/*TODO:OBJECT_ID(N'[OPS].[Table2]')*/
AND TYPE IN ( N'U' )
EXCEPTION
WHEN OTHERS THEN
NULL;
END;
IF v_temp = 1 THEN
TRUNCATE TABLE Table2;
END IF;
END;
CREATE TABLE Table2
test2 CHAR(10) NOT NULL
ALTER TABLE Table2
ADD
CONSTRAINT Table2_PK PRIMARY KEY( test2 );
--SQLDEV:Following Line Not Recognized
ALTER TABLE Table1
ADD
CONSTRAINT Table2_Table1_FK1 FOREIGN KEY( test2 ) REFERENCES Table2 (test2)
--SQLDEV:Following Line Not Recognized
;

Pl do not post duplicates - Need some help in debugging this script

Need some help learning cue points, etc

I need some help with a Flash project I'm working on. If any
Flash junkies out there are up for sitting down with me through
email or IM and helping me get to the point where I have a template
FLA doing what I want to do, I'd be willing to pay you. It wouldn't
be much, but it would be something. Here's what I'm trying to do:
I need to create an interactive talking-head style flash
presentation with a number of progressive download externally
linked FLV files, playing in succession, supported by movie-clip
text animations and supporting graphics which are triggered by cue
points in the video. I also need a simple navigation menu linking
to the FLV files. I've got some of this down already, namely, I've
laid the FLVs in and they are playing in succession. I'm stuck on
the cue point part. At this point I really just need some hands-on
help. I've bought books, I've scoured the web.
I'm easy to communicate with, and I'm good with computers and
comfortable in many multimedia design programs. Flash is very
powerful, but tougher to learn than I expected, and I'm at the end
of my rope =P

My advice... start with a very simple "proof of concept" project before you attempt the entire package.
It will be much easier to scale up if you first have a very good understanding of what's going on.
So one simple video with just one cuepoint and only one button and additional display. You'll also have to work out the interaction of pausing the video when a cuepoint is reached or button pushed to display the graph, giving the viewer time to read the graph... then when the viewer closes the graph, the video should "resume".
Start very simple and build on that only after you understand the fundamentals.
Second, you mention "video reports"... plural. So that most likely means that you will need a video player with a "playlist".
This may mean that you'll need to learn to use a little .xml to bring in the playlist data. You may also find xml an excellant way to bring other data into you project.
At the link listed above there is an excellant tutorial on "Integrating Flash and XML"
"Flash and XML"
"XML Video Playlist"
"ActionScript 3 XML Basics"
"ActionScript 3 Advanced XML"
Personally I would not even begin a project like this without considering how I could use xml to feed data into the project.
Here's an example of a video player I created that has a playlist, thumbnails, categories, transcipts, "Now Playing" etc. All that data comes into the main .swf via various xml files. Super good way in input data into Flash.
http://www.drheimer.com/video/
Yours is a rather ambitious project and will take awhile to gain the skill and assemble the pieces. So when you come to a new part... first create a real simple "proof of concept" model so you can learn how that section works. Don't expect to be able to assemble the entire project all at once.
Best wishes,
Adninjastrator

Need some help in creating Search Help for standard screen/field

I need some help in adding a search-help to a standard screen-field.
Transaction Code - PP01,
Plan Version - Current Plan (PLVAR = '01'),
Object Type - Position ( OTYPE = 'S'),
Click on Infotype Name - Object ( Infotype 1000) and Create.
I need to add search help to fields Object Abbr (P1000-SHORT) / Object Name (P1000-STEXT).
I want to create one custom table with fields, Position Abb, Position Name, Job. Position Abb should be Primary Key. And when object type is Position (S), I should be able to press F4 for Object Abb/Object Name fields and should return Position Abbr and Position Name.
I specify again, I have to add a new search help to standard screen/field and not to enhance it.
This is HR specific transaction. If someone has done similar thing with some other transation, please let me know.
There is no existing search help for these fields. If sm1 ever tried or has an idea how to add new search help to a standard screen/field.
It's urgent.
Thanks in advace. Suitable answers will be rewarded

Hi Pradeep,
Please have a look into the below site which might be useful
Enhancing a Standard Search Help
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/daeda0d7-0701-0010-8caa-
edc983384237
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ee93446011d189700000e8322d00/frameset.htm
A search help exit is a function module for making the input help process described by the search help more flexible than possible with the standard version.
This function module must have the same interface as function module F4IF_SHLP_EXIT_EXAMPLE. The search help exit may also have further optional parameters (in particular any EXPORTING parameters).
A search help exit is called at certain timepoints in the input help process.
Note: The source text and long documentation of the above-specified function module (including the long documentation about the parameters) contain information about using search help exits.
Function modules are provided in the function library for operations that are frequently executed in search help exits. The names of these function modules begin with the prefix F4UT_. These function modules can either be used directly as search help exits or used within other search help exits. You can find precise instructions for use in the long documentation for the corresponding function module.
During the input help process, a number of timepoints are defined that each define the beginning of an important operation of the input help process.
If the input help process is defined with a search help having a search help exit, this search help exit is called at each of these timepoints. If required, the search help exit can also influence the process and even determine that the process should be continued at a different timepoint.
timepoints
The following timepoints are defined:
1. SELONE
Call before selecting an elementary search help. The possible elementary search helps are already in SHLP_TAB. This timepoint can be used in a search help exit of a collective search help to restrict the selection possibilities for the elementary search helps.
Entries that are deleted from SHLP_TAB in this step are not offered in the elementary search help selection. If there is only one entry remaining in SHLP_TAB, the dialog box for selecting elementary search helps is skipped. You may not change the next timepoint.
The timepoint is not accessed again if another elementary search help is to be selected during the dialog.
2. PRESEL1
After selecting an elementary search help. Table INTERFACE has not yet been copied to table SELOPT at this timepoint in the definition of the search help (type SHLP_DESCR_T). This means that you can still influence the attachment of the search help to the screen here. (Table INTERFACE contains the information about how the search help parameters are related to the screen fields).
3. PRESEL
Before sending the dialog box for restricting values. This timepoint is suitable for predefining the value restriction or for completely suppressing or copying the dialog.
4. SELECT
Before selecting the values. If you do not want the default selection, you should copy this timepoint with a search help exit. DISP should be set as the next timepoint.
5. DISP
Before displaying the hit list. This timepoint is suitable for restricting the values to be displayed, e.g. depending on authorizations.
6. RETURN (usually as return value for the next timepoint)
The RETURN timepoint should be returned as the next step if a single hit was selected in a search help exit.
It can make sense to change the F4 flow at this timepoint if control of the process sequence of the Transaction should depend on the selected value (typical example: setting SET/GET parameters). However, you should note that the process will then depend on whether a value was entered manually or with an input help.
7. RETTOP
You only go to this timepoint if the input help is controlled by a collective search help. It directly follows the timepoint RETURN. The search help exit of the collective search help, however, is called at timepoint RETTOP.
8. EXIT (only for return as next timepoint)
The EXIT timepoint should be returned as the next step if the user had the opportunity to terminate the dialog within the search help exit.
9. CREATE
The CREATE timepoint is only accessed if the user selects the function "Create new values". This function is only available if field CUSTTAB of the control string CALLCONTROL was given a value not equal to SPACE earlier on.
The name of the (customizing) table to be maintained is normally entered there. The next step returned after CREATE should be SELECT so that the newly entered value can be selected and then displayed.
10. APP1, APP2, APP3
If further pushbuttons are introduced in the hit list with function module F4UT_LIST_EXIT, these timepoints are introduced. They are accessed when the user presses the corresponding pushbutton.
Note: If the F4 help is controlled by a collective search help, the search help exit of the collective search help is called at timepoints SELONE and RETTOP. (RETTOP only if the user selects a value.) At all other timepoints the search help exit of the selected elementary search help is called.
If the F4 help is controlled by an elementary search help, timepoint RETTOP is not executed. The search help exit of the elementary search help is called at timepoint SELONE (at the
F4IF_SHLP_EXIT_EXAMPLE
This module has been created as an example for the interface and design of Search help exits in Search help.
All the interface parameters defined here are mandatory for a function module to be used as a search help exit, because the calling program does not know which parameters are actually used internally.
A search help exit is called repeatedly in connection with several
events during the F4 process. The relevant step of the process is passed on in the CALLCONTROL step. If the module is intended to perform only a few modifications before the step, CALLCONTROL-STEP should remain unchanged.
However, if the step is performed completely by the module, the following step must be returned in CALLCONTROL-STEP.
The module must react with an immediate EXIT to all steps that it does not know or does not want to handle.
Hope this info will help you.
***Reward points if found useful
Regards,
Naresh

Need some help scripting a specific menu animation, please

Similar Messages

Maybe you are looking for