Need some help setting up Starcraft 2

First off I have read the wiki, https://wiki.archlinux.org/index.php/Starcraft2 ,
My problem is that when I run
wine Installer.exe
I get the following error in a popup window :
"Sorry, the installer was unable to start up. You may be out of hard drive space."
I have 24.6GB of free space in /home.
Also I tried running the install with a new .wine folder in combination with
WINEPREFIX=/media/second_partition
Where I have around 100GB free space. And I still get the same error
Does anyone know what the problem could be ?
Please help if you can...

Seems this is a common issue also with WoW, but I couldn't get any clear solutions from my google searches other than is most likely has nothing to do w/ wine, because all the folks who run into this problem were using Windows e.g. http://us.battle.net/sc2/en/forum/topic/2267602124
Last edited by karol (2011-04-12 01:02:12)

Similar Messages

I need some help setting up a WiFi printer please

Firstly, apologies for the long post but I’m really struggling with this one.
I live in France and am trying to get wifi printing working on a friend’s Intel iMac (OSX Tiger 10.4.11) connected to a Lexmark X4875 printer. She’s connecting to the internet via Airport using a Livebox router, no problems. I’ve set up the printer to work wifi and that all 'appears' to be successful with the wifi light going to green as it should. I’ve also ‘associated’ the printer with the router by pressing the association button on the Livebox at the time of set-up and the printer is registered with the Livebox with correct MAC id.
So far everything looks like it should work until I go ‘Add Printer’ and the wifi printer is never seen (no problems if connected via USB). I’ve reset the printer erasing all print settings and starting again, done numerous restarts of all devices and still no go.
I should add that I have set up many wifi printers previously and even had this one working previously for over a year - it’s just that she had to get a new Livebox recently and now I can’t get it to work.
I realise that not everybody will be familiar with the Livebox although they are common anywhere Orange operates as an ISP but I’m hoping that someone will have some nugget of information that will help me get this sorted.
Thanks in advance for any advice, Paul.

Bump! Anyone?

I need some help setting up my server

Hi, i am very new to this and i need someone with alot of patience (hehe) To help me, i got given a cobalt raq as a present from my friend, they said it is very easy to set up, but knowing my luck i will struggle with it untill i can understand it better, so please could someone help me i will explain in more detail when you get in touch as i do not want to bore everyone one with my "Noobiness" on this situation, Thank's in advance,
Joe

Same answer as for these earlier two postings:
[From April 2007|http://forum.java.sun.com/thread.jspa?forumID=830&threadID=5163397]
[and from March 2008|http://forum.java.sun.com/thread.jspa?forumID=829&threadID=5277621]

Need some help setting up my iphone 4

im new to world ov iphones/ipods, iv never had anything to do with itunes or apple up until 2days ago, i got my new iphone 4 acouple of days ago, i went to set up my phone using my laptop until i discovered my lapto had broken n was unable to use it,
i took my i phone to my GF's house to try and set up my i phone thru her laptop, which already had itunes on it( but a much older versio than the 1 i neeeded) iv never had an itune account befor (jst to let u kno)
so i updated her itunes to version 9, which to seemed to do the trick, i got the basic apps on my phone when it had sync'd, but i didnt relise that this was all done undr the GF's old account details (which i never had the slightest clue about) so when ever i go on to app store and try t get some games/apps it ask for her password to her account, problem is she doesnt kno it and i do not want MY new iphone to b under her details which will renderr it useless, pls tell me i can fix this problem and how!!!!

Go to Settings then to Store then log out and sign in with your iTunes account

Need some help setting up a windows wireless print

HI:
I am trying to print on a pc server. I go to print in the preferences, add a new printer, choose windows, then log in with my given username and password. Everything to this point works fine and the printer is fpound, recognized, and ready to print. But when I try to print to it, it just says on hold (authentication required).
Any advice or suggestions?

I am trying to add a windows printer too. Where exactly did you "login with your username and password" ?
Thanks

Cannot get slide show in full screen mode to come up on secondary monitor regardless of how I set up show it always opens on primary screen. Need some help here.

Slide show in PowerPosint for mac 2011 on iMac will not open full screen mode on secondary monitor. Regardless of how I set the slide show preferences it always opens on primary monior with secondardy monitor having totally balck screen. Need some help if anyone else has run into this problem.

You should contact Microsoft for Mac Support and/or post in their forums.

We have a set of oracle clients running on T5220 zones that need some help

Greetings all -
We have a set of oracle clients running on T5220 zones that need some help.
If, for example, I execute the query "select (all) from dba_objects", trace output reports 90% of the elapsed time spent under "SQLNet message from client".
Here are OS details for the clients: Solaris 10 5/08 s10s_u5wos_10 SPARC
Running "uname -a" from the client gives:
(SunOS bmc-ste-app 5.10 Generic_127127-11 sun4v sparc SUNW,SPARC-Enterprise-T5220)
Here are OS details for the dataserver: Enterprise Linux Enterprise Linux Server release 5.2
Running "uname -a" from the dataserver gives:
(2.6.18-92.1.6.0.2.el5 #1 SMP Thu Jun 26 17:44:55 EDT 2008 x86_64 x86_64 x86_64 GNU/Linux)
The RDBMS is 10.2.0.4
Again, please note, there is no application in the picture here. We are just running a simple catalog query (select * from dba_objects) from sqlplus. Why the wait on something like this? The wait also occurs when a different query is used (select (all) from SYS.COL$ where rownum < 50000). And it doesn't matter if I used the full client or the instant client. I still get the same high-wait.
We had thought - maybe this is a network thing - so we put a test client on the same subnet as the dataserver. This helped - but not enough. The wait is still way too high even with firewalls taken out of the equation.
We've also looked at arraysize, SDU, kernel settings. And we've spent time going over tkprof, truss and sqlnet-tracing.
Has anyone ever had to solve this HIGH WAIT ON CLIENT issue? Is there a work around or some tweak I'm missing.
Is anyone configured like we are (linux dataserver, solaris clients)? If so - did you see anything like this?
tia -
Jim
Edited by: jim1768 on Mar 31, 2010 1:47 PM
Edited by: jim1768 on Mar 31, 2010 2:12 PM
Edited by: jim1768 on Mar 31, 2010 2:13 PM

Hello,
We have the exact same issue. Did you ever solve this issue? We have a t5220 and have just upgraded our 11.5.10.2 11i system on it from 9.2.0.8 32-bit sparc to 11.2.0.1 64-bit sparc. Things should be faster but arent, and our consultant has tracked it down to high wait times when the apps tier using forms connects to the database tier on the same box. So even though the t5220 is both server and client, there is something about the client sql connection.through TNS that his having trouble. Thanks for any information. We've also created an S/R with Oracle.
Note: I am well aware of the other issues with the CMT server series but this particular issue seems independent of the regular / known issues and remains a mystery to us. Other known issues with the CMT servers for SPARC:
Metalink Note 781763.1 (Migration from fast single threaded CPU machine to CMT UltraSPARC T1 & T2)
http://blogs.sun.com/glennf/resource/Optimizing_Oracle_CMT_v1.pdf
http://blogs.sun.com/glennf/tags/throughput
http://blogs.sun.com/glennf/entry/getting_past_go_with_sparc
http://www.oracle.com/apps_benchmark/doc/E-Bus-11i-PAY_ORA_SUN-T5220.pdf (this paper has some oracle init settings at the end. The kernel settings have been included in the OS upgrade)
http://blogs.sun.com/mandalika/entry/siebel_on_sun_cmt_hardware

Remote App on iPad connects but drops after about 20 mins. Need to turn off wait about 1 minute then turn on wifi on iMac before it can reconnect. Need some help please.

Remote App on iPad connects but drops after about 20 mins. Need to turn off wait about 1 minute, then turn on wifi on iMac before it can reconnect. Need some help please.
Already gone through troubleshooting guide a zillion times. Thanks.

This worked for me... A little time consuming but once you get rolling it goes GREAT... Thanks....
I got my artwork and saved it to my Desktop
Opened up Microsoft Paint and clicked on "File" and "Open" and found it to get it on the screen to resize it
Clicked "resize" and a box for changing it opened up
Checked the box "Pixels" and "Unchecked maintain aspect ratio"
Set Horizontal for 640 and Vertical for 480
Clicked on "OK" and went back to "File" and did a "Save As" and chose JPEG Picture
It came up "File Already Existed" and clicked "OK" (really did not care about the original artwork I found because wrong size)
Went to iTunes and on the movie right clicked on "Get Info", clicked on "Details", then "Artwork"
Go to the little box on the top left that shows your old artwork and click on it to get the little blue border to appear around it and hit "Delete" to make it gone
Click on "Add Artwork" and find it where you put the one from above on your Desktop and hit "Open" and OK and your new artwork is now there and all good.
Sounds like a lot of steps to follow but after around 5 or so you will fly through it. This worked perfect on my iPhone 6 Plus and I have artwork on my Home Videos now.

Need some help in creating Search Help for standard screen/field

I need some help in adding a search-help to a standard screen-field.
Transaction Code - PP01,
Plan Version - Current Plan (PLVAR = '01'),
Object Type - Position ( OTYPE = 'S'),
Click on Infotype Name - Object ( Infotype 1000) and Create.
I need to add search help to fields Object Abbr (P1000-SHORT) / Object Name (P1000-STEXT).
I want to create one custom table with fields, Position Abb, Position Name, Job. Position Abb should be Primary Key. And when object type is Position (S), I should be able to press F4 for Object Abb/Object Name fields and should return Position Abbr and Position Name.
I specify again, I have to add a new search help to standard screen/field and not to enhance it.
This is HR specific transaction. If someone has done similar thing with some other transation, please let me know.
There is no existing search help for these fields. If sm1 ever tried or has an idea how to add new search help to a standard screen/field.
It's urgent.
Thanks in advace. Suitable answers will be rewarded

Hi Pradeep,
Please have a look into the below site which might be useful
Enhancing a Standard Search Help
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/daeda0d7-0701-0010-8caa-
edc983384237
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ee93446011d189700000e8322d00/frameset.htm
A search help exit is a function module for making the input help process described by the search help more flexible than possible with the standard version.
This function module must have the same interface as function module F4IF_SHLP_EXIT_EXAMPLE. The search help exit may also have further optional parameters (in particular any EXPORTING parameters).
A search help exit is called at certain timepoints in the input help process.
Note: The source text and long documentation of the above-specified function module (including the long documentation about the parameters) contain information about using search help exits.
Function modules are provided in the function library for operations that are frequently executed in search help exits. The names of these function modules begin with the prefix F4UT_. These function modules can either be used directly as search help exits or used within other search help exits. You can find precise instructions for use in the long documentation for the corresponding function module.
During the input help process, a number of timepoints are defined that each define the beginning of an important operation of the input help process.
If the input help process is defined with a search help having a search help exit, this search help exit is called at each of these timepoints. If required, the search help exit can also influence the process and even determine that the process should be continued at a different timepoint.
timepoints
The following timepoints are defined:
1. SELONE
Call before selecting an elementary search help. The possible elementary search helps are already in SHLP_TAB. This timepoint can be used in a search help exit of a collective search help to restrict the selection possibilities for the elementary search helps.
Entries that are deleted from SHLP_TAB in this step are not offered in the elementary search help selection. If there is only one entry remaining in SHLP_TAB, the dialog box for selecting elementary search helps is skipped. You may not change the next timepoint.
The timepoint is not accessed again if another elementary search help is to be selected during the dialog.
2. PRESEL1
After selecting an elementary search help. Table INTERFACE has not yet been copied to table SELOPT at this timepoint in the definition of the search help (type SHLP_DESCR_T). This means that you can still influence the attachment of the search help to the screen here. (Table INTERFACE contains the information about how the search help parameters are related to the screen fields).
3. PRESEL
Before sending the dialog box for restricting values. This timepoint is suitable for predefining the value restriction or for completely suppressing or copying the dialog.
4. SELECT
Before selecting the values. If you do not want the default selection, you should copy this timepoint with a search help exit. DISP should be set as the next timepoint.
5. DISP
Before displaying the hit list. This timepoint is suitable for restricting the values to be displayed, e.g. depending on authorizations.
6. RETURN (usually as return value for the next timepoint)
The RETURN timepoint should be returned as the next step if a single hit was selected in a search help exit.
It can make sense to change the F4 flow at this timepoint if control of the process sequence of the Transaction should depend on the selected value (typical example: setting SET/GET parameters). However, you should note that the process will then depend on whether a value was entered manually or with an input help.
7. RETTOP
You only go to this timepoint if the input help is controlled by a collective search help. It directly follows the timepoint RETURN. The search help exit of the collective search help, however, is called at timepoint RETTOP.
8. EXIT (only for return as next timepoint)
The EXIT timepoint should be returned as the next step if the user had the opportunity to terminate the dialog within the search help exit.
9. CREATE
The CREATE timepoint is only accessed if the user selects the function "Create new values". This function is only available if field CUSTTAB of the control string CALLCONTROL was given a value not equal to SPACE earlier on.
The name of the (customizing) table to be maintained is normally entered there. The next step returned after CREATE should be SELECT so that the newly entered value can be selected and then displayed.
10. APP1, APP2, APP3
If further pushbuttons are introduced in the hit list with function module F4UT_LIST_EXIT, these timepoints are introduced. They are accessed when the user presses the corresponding pushbutton.
Note: If the F4 help is controlled by a collective search help, the search help exit of the collective search help is called at timepoints SELONE and RETTOP. (RETTOP only if the user selects a value.) At all other timepoints the search help exit of the selected elementary search help is called.
If the F4 help is controlled by an elementary search help, timepoint RETTOP is not executed. The search help exit of the elementary search help is called at timepoint SELONE (at the
F4IF_SHLP_EXIT_EXAMPLE
This module has been created as an example for the interface and design of Search help exits in Search help.
All the interface parameters defined here are mandatory for a function module to be used as a search help exit, because the calling program does not know which parameters are actually used internally.
A search help exit is called repeatedly in connection with several
events during the F4 process. The relevant step of the process is passed on in the CALLCONTROL step. If the module is intended to perform only a few modifications before the step, CALLCONTROL-STEP should remain unchanged.
However, if the step is performed completely by the module, the following step must be returned in CALLCONTROL-STEP.
The module must react with an immediate EXIT to all steps that it does not know or does not want to handle.
Hope this info will help you.
***Reward points if found useful
Regards,
Naresh

Please I need some help with a table

Hi All
I need some help with a table.
My table needs to hold prices that the user can update.
Also has a total of the column.
my question is if the user adds in a new price how can i pick up the value they have just entered and then add it to the total which will be the last row in the table?
I have a loop that gets all the values of the column, so I can get the total but it is when the user adds in a new value that I need some help with.
I have tried using but as I need to set the toal with something like total
    totalTable.setValueAt(total, totalTable.getRowCount()-1,1); I end up with an infinite loop.
Can any one please advise on some way I can get this to work ?
Thanks for reading
Craig

Hi there camickr
thanks for the help the other day
this is my full code....
package printing;
import java.awt.*;
import java.awt.event.*;
import java.awt.print.*;
import javax.swing.*;
import javax.swing.table.*;
import java.text.DecimalFormat;
public class tablePanel
    extends JDialog implements Printable {
BorderLayout borderLayout1 = new BorderLayout();
private boolean printing = false;
private Dialog1 dialog;
JPanel jPanel = new JPanel();
JTable table;
JScrollPane scrollPane1 = new JScrollPane();
DefaultTableModel model;
private String[] columnNames = {
private Object[][] data;
private String selectTotal;
private double total;
public tablePanel(Dialog1 dp) {
    dp = dialog;
    try {
      jbInit();
    catch (Exception exception) {
      exception.printStackTrace();
public tablePanel() {
    try {
      jbInit();
    catch (Exception exception) {
      exception.printStackTrace();
private void jbInit() throws Exception {
    jPanel.setLayout(borderLayout1);
    scrollPane1.setBounds(new Rectangle(260, 168, 0, 0));
    this.add(jPanel);
    jPanel.add(scrollPane1, java.awt.BorderLayout.CENTER);
    scrollPane1.getViewport().add(table);
    jPanel.setOpaque(true);
    newTable();
    addToModel();
    addRows();
    setTotal();
public static void main(String[] args) {
tablePanel tablePanel = new tablePanel();
tablePanel.pack();
tablePanel.setVisible(true);
public void setTotal() {
total = 0;
int i = table.getRowCount();
for (i = 0; i < table.getRowCount(); i++) {
    String name = (String) table.getValueAt(i, 1);
    if (!"".equals(name)) {
      if (i != table.getRowCount() - 1) {
        double dt = Double.parseDouble(name);
        total = total + dt;
String str = Double.toString(total);
table.setValueAt(str, table.getRowCount() - 1, 1);
super.repaint();
public void newTable() {
    model = new DefaultTableModel(data, columnNames) {
    table = new JTable() {
      public Component prepareRenderer(TableCellRenderer renderer,
                                       int row, int col) {
        Component c = super.prepareRenderer(renderer, row, col);
        if (printing) {
          c.setBackground(getBackground());
        else {
          if (row % 2 == 1 && !isCellSelected(row, col)) {
            c.setBackground(getBackground());
          else {
            c.setBackground(new Color(227, 239, 250));
          if (isCellSelected(row, col)) {
            c.setBackground(new Color(190, 220, 250));
        return c;
    table.addMouseListener(new MouseAdapter() {
      public void mouseClicked(MouseEvent e) {
        if (e.getClickCount() == 2) {
        if (e.getClickCount() == 1) {
          if (table.getSelectedColumn() == 1) {
   table.setTableHeader(null);
    table.setModel(model);
    scrollPane1.getViewport().add(table);
    table.getColumnModel().getColumn(1).setCellRenderer(new TableRenderDollar());
public void addToModel() {
    Object[] data = {
        "Price", "5800"};
    model.addRow(data);
public void addRows() {
    int rows = 20;
    for (int i = 0; i < rows; i++) {
      Object[] data = {
      model.addRow(data);
public void printOut() {
    PrinterJob pj = PrinterJob.getPrinterJob();
    pj.setPrintable(tablePanel.this);
    pj.printDialog();
    try {
      pj.print();
    catch (Exception PrintException) {}
public int print(Graphics g, PageFormat pageFormat, int pageIndex) throws PrinterException {
    Graphics2D g2 = (Graphics2D) g;
    g2.setColor(Color.black);
    int fontHeight = g2.getFontMetrics().getHeight();
    int fontDesent = g2.getFontMetrics().getDescent();
    //leave room for page number
    double pageHeight = pageFormat.getImageableHeight() - fontHeight;
    double pageWidth = pageFormat.getImageableWidth();
    double tableWidth = (double) table.getColumnModel().getTotalColumnWidth();
    double scale = 1;
    if (tableWidth >= pageWidth) {
      scale = pageWidth / tableWidth;
    double headerHeightOnPage = 16.0;
    //double headerHeightOnPage = table.getTableHeader().getHeight() * scale;
    //System.out.println("this is the hedder heigth   " + headerHeightOnPage);
    double tableWidthOnPage = tableWidth * scale;
    double oneRowHeight = (table.getRowHeight() + table.getRowMargin()) * scale;
    int numRowsOnAPage = (int) ( (pageHeight - headerHeightOnPage) / oneRowHeight);
    double pageHeightForTable = oneRowHeight *numRowsOnAPage;
    int totalNumPages = (int) Math.ceil( ( (double) table.getRowCount()) / numRowsOnAPage);
    if (pageIndex >= totalNumPages) {
      return NO_SUCH_PAGE;
    g2.translate(pageFormat.getImageableX(), pageFormat.getImageableY());
//bottom center
    g2.drawString("Page: " + (pageIndex + 1 + " of " + totalNumPages), (int) pageWidth / 2 - 35, (int) (pageHeight + fontHeight - fontDesent));
    g2.translate(0f, headerHeightOnPage);
    g2.translate(0f, -pageIndex * pageHeightForTable);
    //If this piece of the table is smaller
    //than the size available,
    //clip to the appropriate bounds.
    if (pageIndex + 1 == totalNumPages) {
      int lastRowPrinted =
          numRowsOnAPage * pageIndex;
      int numRowsLeft =
          table.getRowCount()
          - lastRowPrinted;
      g2.setClip(0,
                 (int) (pageHeightForTable * pageIndex),
                 (int) Math.ceil(tableWidthOnPage),
                 (int) Math.ceil(oneRowHeight *
                                 numRowsLeft));
    //else clip to the entire area available.
    else {
      g2.setClip(0,
                 (int) (pageHeightForTable * pageIndex),
                 (int) Math.ceil(tableWidthOnPage),
                 (int) Math.ceil(pageHeightForTable));
    g2.scale(scale, scale);
    printing = true;
    try {
    table.paint(g2);
    finally {
      printing = false;
    //tableView.paint(g2);
    g2.scale(1 / scale, 1 / scale);
    g2.translate(0f, pageIndex * pageHeightForTable);
    g2.translate(0f, -headerHeightOnPage);
    g2.setClip(0, 0,
               (int) Math.ceil(tableWidthOnPage),
               (int) Math.ceil(headerHeightOnPage));
    g2.scale(scale, scale);
    //table.getTableHeader().paint(g2);
    //paint header at top
    return Printable.PAGE_EXISTS;
class TableRenderDollar extends DefaultTableCellRenderer{
    public Component getTableCellRendererComponent(
      JTable table,
      Object value,
      boolean isSelected,
      boolean isFocused,
      int row, int column) {
        setHorizontalAlignment(SwingConstants.RIGHT);
      Component component = super.getTableCellRendererComponent(
        table,
        value,
        isSelected,
        isFocused,
        row,
        column);
        if( value == null || value .equals("")){
          ( (JLabel) component).setText("");
        }else{
          double number = 0.0;
          number = new Double(value.toString()).doubleValue();
          DecimalFormat df = new DecimalFormat(",##0.00");
          ( (JLabel) component).setText(df.format(number));
      return component;
}

Need some help with putting a folder in users directory

I'm not sure how to do this, but what I want to do is put this file in C:/My Documents, but I need to be able to verify that C://My Documents exists, if not put it in C:/Program Files.
Can any one help me out?
try {
                    String[] contactArray = parseDatFile(fc.getSelectedFile());
                    Document document = createXMLDocument(contactArray);
                    saveToXMLFile(
                    document,
                    new File(
                    "C:/Program Files/xxx/",// looks for directory for list
                    "xxxxxxxxxxxxxxxxxxxxxxxxxxxx"));
                } catch (Exception exc) {
                    File f = new File("C:/Program Files/xxx/");// setting directory for list if not there
                    boolean yes = true;
                    yes = f.mkdir();// creating directory
                    try {
                        String[] contactArray = parseDatFile(fc.getSelectedFile());
                        Document document = createXMLDocument(contactArray);
                        saveToXMLFile(
                        document,
                        new File(
                        "C:/Program Files/xxx/",// used only if the directory didn't exist
                        "xxxxxxxxxxxxxxxxxxxxxxx"));

Need some help with putting a folder in users directoryI recomend using System.getProperty( "user.home" ) not a hard-coded value.
This will use the users home folder ( C:\My Documents ) on Win9X (I guess), C:\Documents and Settings\<current user> on Win2K +, and ~ on Unix-a-likes.

HT1695 I NEED SOME HELP CONNECTING TO MY NEW IPAD

yes i need some help to set my new ipad can u plz help

http://help.apple.com/ipad/5/interface/
Stedman

Need some help with color on a column.

Hello
I need some help on how I can set the color on either column header or the whole column.
I have a report with where the first row display a total sum. The rows under that are htmldb_item.text where the user may input some values.
The sum of these textboxes should match the the total column on top. If it does not match then the header or column should be marked red.
I have one pl/sql prosess where i check this, and i return a message for that column, can I in this prosess set the column color for the report?
report looks like this
total1----total2----total3....
box1-----box2-----box3....
box1-----box2-----box3....
box1-----box2-----box3....
box1-----box2-----box3....
so if the sum of all the box1s do not match total1 then column or header is red.
thanks,
Anders

Hi Anders,
have a look at Carls example: http://htmldb.oracle.com/pls/otn/f?p=11933:7:3740381051529350
It works with row template, but maybe you can change it for working with column templates.
chrissy

Need some help with Calendar on my iPhone.

Ok folks. Need some help and it may be basic, but I'm struggling with it.
My wife and I both have iphone 5's. Both phones share one iCloud Id and one Apple ID.
So, how do we share information across the apple calendar app?
If I add something to my cal. It does not go to her. How can we get them to sync?
Please help!!!
Thank You!!

Two things to check by putting the two iOS devices side-by-side. First, check in Settings > iCloud to assure that you are indeed both using the same iCloud login. Also, check that calendar is toggled on.
Then, check Settings > "Mail, Contacts, and Calendars". Scroll down to the calendars section and assure that your iCloud calendar is set as the "Default Calendar".
Then, check that Settings > "Mail, Contacts, and Calendars" > "Fetch new data" is set to something suitable. Note that "Push" will be best for iCloud.
Lastly, open Calendars app, touch "Calendars" at the bottom, and assure that iCloud calendar is checked so it is visible.
Then give you calendars a try again making sure that you are posting calendar events in the iCloud calendar.
Hope this helps.

Need some help with Mail settings

I need some help on what mail settings to use. Basically I want my Mac's Mail.app synced with my iPhone's mail.app and everything on the gmail server to be archived and have it so that i do not need to download all the archived emails that are on gmail to either mail.app, if anyone could help it would be appreciated.

You are not alone. I can't get mail to work with our exchange server no matter what I do. I set Entourage up in less than 2 minutes by entering some simple information. I am using the latest versions of Leopard and Mail and it just refuses to connect.
For instance, in Entourage I entered my user name, password and the exchange server name and that was it. Got my mail and it works great. Mail wants to know the SMTP server name? What SMTP server? No matter what information I put in that field it gives me an error saying it can'tr connect to the SMTP server. That is because it is an exchange server not an SMTP server I guess. Also, even when I enter the exact same information as I did with Entourage, mail refuses to connect with it saying to "check the connection". The connection works fine, as Entourage is having no problems sending or receiving mail. With Entourage there is a LDAP setting but no where in Mail can you enter what the LDAP server is. At least is doesn't use that terminology anywhere.
What do you have to do to get Mail to work with an exchange server?

Need some help setting up Starcraft 2

Similar Messages

Maybe you are looking for