Need some Help & suggestion on setting & connecting From Mini to IPod Touch

I just recently bought a IPod Touch (16GB). I had discovered for me to connect to the internet on my Ipod Touch I need a Wireless Router or have some kind of WiFi connection, I don't have that right now but I Do Have a DSL Broadband Modem ( Westell). I had recently ordered a Apple Airport Extream Base station hoping that may Help me connect and have the WiFi that I need to have connect to my Ipod Touch. What do you think?
My Mac Mini already has a wireless card Airport Extream installed but the Airport is turned off, How Do I Turn it back on in my computer?
I was reading one Post that was kind of similar to my situation, the answer was that the Person needed a USB Cable to connect to the Ipod Touch, How is that Set Up? and what type of USB Cable? and can you get one from either the Apple web site or from MacMall?
The other Answer was to share the WiFi with a broadband and to create a WiFi Network with the Mac Mini How Do I do That and How Do I Share the Internet connection with my IPod Touch?
In My Ipod Touch Settings under the WiFi it says to choose a Network: there are 2 Options one is 2WIRE460 which is Locked the other says: Other where I have to put in a Network name, How do I get Pass this or how Do I set this up? after I set up a wireless and a WiFi system?
Thank You,
Mrs Foster.

Hello,
You can use the Mini and it's Airport Extreme card as a simple router so there is no need for the AEBS. You cannot sync the iPod touch by WiFi (Airport) but you can access the internet:
Go to  menu > System Preferences... > Sharing > Internet tab.
Choose "+Share your connection from: Built-in Ethernet+" and "+To computers using: Airport+".
Click "+Airport Options...+"
Enter a Network Name of your choosing.
Check "+Enable Encryption (using WEP)+"
Enter a 13-character password twice.
Select "128-bit".
Press "Okay".
Press "Start".
Navigate to  menu > System Preferences... > Sharing > Services tab.
Check "+Personal Web Sharing+".
You should now be good to go to use Safari.
cheers
mrtotes

Similar Messages

Need some help with downloading PDF's from the net.

need some help with downloading PDF's from the net. Each time I try to click on a link from a website, if it takes me to a new screen to view a pdf, it just comes up as a blank black screen? any suggestions?

Back up all data.
Triple-click the line of text below to select it, the copy the selected text to the Clipboard (command-C):
/Library/Internet Plug-ins
In the Finder, select
Go ▹ Go to Folder
from the menu bar, or press the key combination shift-command-G. Paste into the text box that opens (command-V), then press return.
From the folder that opens, remove any items that have the letters “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari, and test.
The "Silverlight" web plugin distributed by Microsoft can also interfere with PDF display in Safari, so you may need to remove it as well, if it's present.
If you still have the issue, repeat with this line:
~/Library/Internet Plug-ins
If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari again.

Need some help in saving video message from viber to my Iphone. I disabled the thing that would save photos and videos automatically then, there comes a video I want to save. After loading and watching it, I press the "save to gallery"

Need some help in saving video message from viber to my Iphone 5S with new ios 8's program . I disabled the thing that would save photos and videos automatically then, there comes a video I want to save. After loading and watching it, I press the "save to gallery" thing but it doesn't save in gallery. I tried all, restarting my phone, rebooting then turning on the save automatically thing and when I watch it again, it still wouldn't save.

Probably a good question to ask Viber or look at their support site.

Hi, i need your help. I'm thinking of buying an iPod Touch 5..but i own a wireless G Router at home. So can iPod Touch 5 connect to a wireless G router? Will it connect easily and fast? Thank you.

Hi, i need your help. I'm thinking of buying an iPod Touch 5..but i own a wireless G Router at home. So can iPod Touch 5 connect to a wireless G router? Will it connect easily and fast? Thank you.

Hi, i need your help. I'm thinking of buying an iPod Touch 5..but i own a wireless G Router at home. So can iPod Touch 5 connect to a wireless G router? Will it connect easily and fast? Thank you.

I Need Your Help.How Do I Get Internet For My IPod Touch 4,So I Can Have Music To Listen To.Thank You,donna Spinner

I Need Your Help With My IPod Touch 4 I Would Like To Have Music To Listen To&I Would Like To Know How To Get Internet For My Apple IPod Touch 4 So I Can Have Music To Listen To.Thank You,Donna Spinner

Connect to your home wi-fi network.
Click Support at the top of this page, then click Manuals.
Select the ipod touch manual.

Using wall charger from mini for ipod touch

Can anyone tell me if it is safe for my duaghter to use the wall charger from my old ipod mini to charge her new ipod touch? The connection seems to be the same, but not sure of voltage or any of that stuff
Thanks

Yes.

Need some help & suggestions in designing Crystal Report

I need to arrange my data in the following manner:
I need to group my data by a field and need to show multiple information for that record at the same row level and then include some crosstab information. I realized that I cannot have multiple information at the same row level for a group.
As an example, please consider that the group field is Name and A and B are two records returned based on the grouping field. I also need to show 'Description' and a color coded box for that record.
And then I need to show the cross tab data for that group.
I need a table something like what is shown below:
                                                          X  Y  Z
A.Name A.Desc A.ColorCodeBox    Var1    0  1  2
                                                  Var2    2  3  4
                                                  Var3    2  4  4
B.Name B.Desc B.ColorCodeBox     Var1    0  1  2
                                                  Var2    2  3  4
                                                  Var3    2  4  4
Where the numbers are some values and X,Y,Z are the column headings and the numbers are some values.
Could you please provide some suggestions as to how this can be achieved? I am using the default Crystal Reports that ships with Visual Studio 2008 Prof. But if there is some other feature available with any other version, we can consider switching to it.
Thanks in advance.

Here is how my table is laid out.
col-1    col-2     col-3              col-4 col-5 col-6
field-a   field-b   field-c        r1 11111 22222 33333
                                   r2 44444 55555 66666
                                   r3 77777 88888 99999
As you had mentioned, I am creating two group headers in my group section where the first group header contains the following and overlays the second group header.
col-1    col-2     col-3
field-a   field-b   field-c
And the second group header contains the cross tab information.
          col-4 col-5 col-6
    r1 11111 22222 33333
    r2 44444 55555 66666
    r3 77777 88888 99999
And I suppressed the column headings (col-X) from both the groups using the formula that you mentioned. But here is how my table is being laid out
col-1    col-2     col-3              col-1 col-2 col-3
field-a   field-b   field-c        r1 11111 22222 33333
                                   r2 44444 55555 66666
                                   r3 77777 88888 99999
                                                                           <- blank line
field-a   field-b   field-c        r1 11111 22222 33333
                                   r2 44444 55555 66666
                                   r3 77777 88888 99999
I have already done a fit section and made sure there is no space. Also my crosstab table contains string fields and I am suppressing the row and column totals in the crosstab as I do not need them.
Do let me know if you have any ideas on this.

Need some help how to generate xml from java bean.

Hi,
Can some one help me how to generate the xml format output from a java bean.
The bean contains around 15 to 20 attribute values.
Thanks in Advance.
sarayu

You can use XMLEncoder with custom persistence delegates if needed:
http://java.sun.com/products/jfc/tsc/articles/persistence4/

I need some help with Portal - LDAP connection

Hello...
Can some one please help me with an issue I have when I try to connect a Portal in version EP6.0, with an LDAP, I go to System Admin --> System Config --> UM Config --> LDAP Server, Test the connection, it's successful, then restarted the server, but I still can't see the users at the LDAP.
Hope some one can help me soon.
Miguel

Hi Miguel,
After Configuring LDAP to UME portal,You need to create users in the LDAP.Then only you can see the users when you go to user admin->users->search for the user
1. What happens when you give * to search users?
2. Are you sure that you have mapped attributes of the user properly in data source configuration Xml file..
3 Which LDAP server you are using.
Cheers
Rani A

I need some help - Can't get response from refurbished AP1232AG access points -

We purchased 4 Cisco-refurb AP1232AG access points, intending to use one as a router and the others as repeaters. We have ran AC power to locations for all of the routers, mounted them in outdoor NEMA boxes, added the lightning arrestors and attached 12db omni antennas. All of that process went well.
I'm trying to access the routers per instructions by cisco, which state that all refurbs are set to 10.0.0.1 and must be accessed using a console cable from computer com port to the unit's console port. We have the cable and have it set up in that manner. We have tried using telnet, serial and web sessions within the Indigo software and it states the unit is not responding. I've tried using the Cisco IPSU and get the same message that the unit won't respond. I can't ping it from the C drive as well. All of the routers respond similarly so I'm certain that it's my fault and not the APs.
Is there anyone who can take a minute to walk me through what I may or may not be doing correctly to access the APs and get them configured? I lack the requisite background to determine the problem on my own. I feel confident that I can configure them if I can get to them.
Any would be appreciated.
thanks

Hi rlrigsby0613 and welcome to the Cisco Home Community!
This product is being handled by the Cisco Small Business Support Community.
For future discussions about this product, go here.
The Search Function is your friend.... and Google too.
How to Secure your Network
How to Upgrade Routers Firmware
Setting-Up a Router with DSL Internet Service
Setting-Up a Router with Cable Internet Service
How to Hard Reset or 30/30/30 your Router

I need some help on transferring videos to my 5th-gen. iPod

My "Tetris" game will not dowload to my iPod. There are also several South Park and Jackas episodes, and music videos that I purchased from the iTunes store that will not sync to my fifth generation iPod with video. How can I get these videos and game to download, and why aren't they? One of the common error messages that comes up is:
iTunes could not sync [file] to [my] iPod because the file is corrupt and could not be read.
Reposting the files on my account did not work, at least for the game. Please help me. My problem is not an issue of authorization, due to separate accounts. Please shed some light on my problem, and thanks.

Firmware is basically the internal OS (operating system) software in which your iPod runs on.
A "Firmware update" can be found in iTunes (if you aren't updated to the latest version of internal software for your iPod), which updates your iPod's OS (operating system).
New firmware update versions usually do not make a noticable change on your iPod, unless the last firmware update contained a bug, where is slowed your iPod down, for example, and the new firmware is tweaked from the last version, and doesn't slow down your iPod anymore.
Also, iTunes and your computer will call a firmware update/software the "firmware files", because a computer will read what an update contains, by how its files are... just another bit of info.
I hope that explains it.
-Kylene
If any post helps or solves your issue, please mark it that way accordingly. Thank you for helping the boards!

Need some help in LiveCycle Designer ES 8.2

Hi i need help with tables in livecyckle.
Example. I create one table with 32 rows and 8 numretic cells, and another table below with 1 row and 8 numretic cells.
In the big table i can input numbers and working fine.
now to my problem. Ex, i want to input number 12 in row 1 cell 3.and then again same number 12 in row 2 cell 3 and i want the result (24) in table 2 row 1 cell 3. is there anyboby who can help me with that See below
Header 1
Header 2
Header 3
Header 4
Header 5
Header 6
Header 7
Header 8
12
3
5
12
7
9
4
Header 1
Header 2
Header 3
Header 4
Header 5
Header 6
Header 7
Header 8
4
24
10
14
Best regards Stig

Hi again Steve and thanx for the reply..send you a coupie of my file.
All text on it is in swedish so i can explain a little for you.
Text Veckodag is Weekday,Tim is hours. Frånv. is a shortname for sickness,
Dagtid is daytime Kväll is evening, Helg is weekends, Afton is Big weekend
like christmas day, s-helg is a shortname for big weekendsdays like day
after christmas day, Jour is jour. The field to the left with numbers is
date. Totalt is total
The only fields i need some help with is the field from Tim to Jour. And the
result should apear in the last fielt Totalt
Can also tell that im not so good in english but im learning. And the last
thing of all :Happy easter to you and thanxs again.
Stig in sweden My E-mail adress is [email protected]

HT201210 at the end of iOS6 download,my ipod touch says 'update failed'.i need some help to resolve this problem. thanks

at the end of iOS6 download,my ipod touch says 'update failed'.i need some help to resolve this problem. thanks

Try:
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Next connect to iTunes and update via iTunes. Others have had the same problem.

Ok I got my iPod from my brothers friend and my IPod says "iPod is disabled connect to iTunes" then my computer says cannot get onto iPod because I need the iPod passcode and of course I cannot put it in so I need some help please

Ok i got my iPod from my brothers friend and my IPod says "iPod is disabled connect to iTunes" then my computer says cannot get onto iPod because I need the iPod passcode and of course I cannot put it in so I need some help please

Try placing in DFU mode and then restoreing.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

Remote App on iPad connects but drops after about 20 mins. Need to turn off wait about 1 minute then turn on wifi on iMac before it can reconnect. Need some help please.

Remote App on iPad connects but drops after about 20 mins. Need to turn off wait about 1 minute, then turn on wifi on iMac before it can reconnect. Need some help please.
Already gone through troubleshooting guide a zillion times. Thanks.

This worked for me... A little time consuming but once you get rolling it goes GREAT... Thanks....
I got my artwork and saved it to my Desktop
Opened up Microsoft Paint and clicked on "File" and "Open" and found it to get it on the screen to resize it
Clicked "resize" and a box for changing it opened up
Checked the box "Pixels" and "Unchecked maintain aspect ratio"
Set Horizontal for 640 and Vertical for 480
Clicked on "OK" and went back to "File" and did a "Save As" and chose JPEG Picture
It came up "File Already Existed" and clicked "OK" (really did not care about the original artwork I found because wrong size)
Went to iTunes and on the movie right clicked on "Get Info", clicked on "Details", then "Artwork"
Go to the little box on the top left that shows your old artwork and click on it to get the little blue border to appear around it and hit "Delete" to make it gone
Click on "Add Artwork" and find it where you put the one from above on your Desktop and hit "Open" and OK and your new artwork is now there and all good.
Sounds like a lot of steps to follow but after around 5 or so you will fly through it. This worked perfect on my iPhone 6 Plus and I have artwork on my Home Videos now.

Need some Help & suggestion on setting & connecting From Mini to IPod Touch

Similar Messages

Maybe you are looking for