Need some help, system won't boot now.

Yesterday, I was having trouble getting WinXP installed on my SATA drive...after I tried some stuff to no avail, I decided to call it a night. When I got up, I went to boot up the system and now all that happens is the 1 LED light flashes and the CD-ROM LED light flashes(and even these don't happen all the time). Nothing else happens, fans don't start etc. So I need some help on troubleshooting this prob. When I do start it up, the D-bracket LEDs flash 4 red also, just flash like the other LED lights. My first guess would be that the PSU is dead? My PSU is a Antec Truepower 380W. Any help is much appreciated.

Believe Bas; As he is 100% Correct, as even 18 Amps is not anywhere enough on the +12V Rail nowadays, I mean I think the New "Minimum" Should be No Less than 25 Amps on the +12V Rail, With these new Powerful Vidio Cards, that Require thier own "Molex" Power Supply Connected to them (As most of these Top Nvidia FX, and ATI Pro's) Need and they can demand up to 6 Amps themselves, I mean, these Cards Have 400 and 550MHZ GPU's on them with over 100 Million Transistors, Not to mention the Extra 256MB of High Speed Graphics memory, Add this with a New 64BIT CPU, and a Sound Card, and a Couple of S-ATA's in RAID, And the 1GIG of High Speed System RAM, and you Are At or Over 18 Amps Already , And we are not even talking CD and DVD's or the At least 4 Fans that you should have ...Yep I for one say the Day's of the 18 Amp Min. Rating for the +12V Rail are Gone Forever...Why do you think that all the Really Good PSu's have At Least 30 Amp Ratings on thier +12V Rails......And in the Case of Enermax, They even went as Far to Start Building thier PSU's With 2 (Dual) +12V Rails ...Thats right, Now they have a +12V-1, and a +12V-2 , Now the CPU gets it's OWN Dedicated +12V Rail, and the System Gets the +12V-2 Rail.......I just got the new Enermax for my 3RD Rig that I'm Building (Dual Opteron 248) Rig , with Bas's Help of Coarse.....But For $99.00 US It was the Best Money spent yet, so much, for a little Price, as the Antec Units are More expensive...And I hear that they are doing a little Cheating on thier Amp Ratings these Days ..Ask "Wonk" he will tell you... ..............Sean REILLY875

Similar Messages

Help System won't boot

I'm stuck...I have several older P3 and K6 systems that won't even POST when I have a PI21AG card inserted. I have looked everywhere I can think of with no success.
TIA, Kirby

Try it with the motherboard outside the case and setting on a non conductive surface having only the cpu with heatsink, video card and one stick of memory in the slot nearest to the cpu in the motherboard. You can use a flat bladed screwdriver to momentarily short across the power switch pins on the motherboard to turn it on. That will eliminate any possibility of the motherboard shorting against something inside the case.
Also check to see if there are any unused mounting posts or other objects underneath the motherboard that could short it out.

Can't boot Lenovo Yoga 10+ HD, need some help ASAP!

Hi guys,
I am a bit clueless here. I just purchased the Yoga 10+ HD tablet and all was fine. Today I realised that my power button is constantly blinking (every 3 seconds). I cant boot the tablet the usual way by pressing the button. Clicking on it for more than 10 seconds won't change anything eiter. What is this and how can I get my tablet back to work?
PS: If I connect my tablet to my PC I get more than 12+ harddrives which can't be accessed and differ between 550kb up to 12gb.
I seriously need some help. I think its somehow in sleep mode or so. I don't know how to fix this.
thx for any solution.
Solved!
Go to Solution.

Ok guys, got it. All fine. HAd to push button more than 30 secs. All fine now.

Need help, system won't start up

Need help, system won't start up
When I turn on the system I hear a loud squeaking noise that could be coming from the hard drive, it does it for moment then a blank white screen appears w/ a tiny folder in the middle of the screen with a "?" blinking on and off on the folder. I never had any problems until now. What can I do, any suggestions.

hi capitala1,
+When I try to install the operating system to the internal drive, I don't see a destination option for that drive like I did for the external+
Do you mean that it doesn't show up when you try to startup holding down the option key, or that it doesn't show up in Disk Utility when started up on the external disk?
+...You think the drive is bad, if so, what can I do to retrieve some of the data off of it.+
Yes, it sounds like your hard drive is bad. Do you have access to techtools or Disk Warrior? either of these may be able to repair the drive enough to extract your info from it, if disk utility can't.
I know that there are shops that specialize in extracting info from bad hard drives, but they tend to be pretty expensive. I am sure others on this forum will be able to help you find one if you are interested.
PB
PS it isn't going to help this time, but remember in the future, backup, everything important to you regularly!

Need some help after inserting CMS system

Hi on my site ive inserted an CMS system from Cushy. It all work that isnt the problem. The problem is that my page is a mess now.. The only thing ive addes is a cms code so im hoping the solution isnt hard to do.
There are three pages that are complete changed.
The home page
http://www.vakantiewoningeninsuriname.nl/index.html
The text colomn right under is moved.How can i place this back?
on http://www.dorff.nl/ you can see how it was before i add the CMS.
The next page is:
http://www.vakantiewoningeninsuriname.nl/bezienswaardighedenparamaribo.html
You can see there is a lot extra space between the head and the text. And you see that the text is not only at the right side anymmore.
This is how it should be:
http://www.dorff.nl/bezienswaardighedenparamaribo.html
The same goes for this page:
http://www.vakantiewoningeninsuriname.nl/prijzen.html
And this is how it have to be:
http://www.dorff.nl/prijzen.html
Hope you can help, thank you for looking..
Regards Brian

Dear Nancy,
Thank you for your response,
I will try to explain again what is wrong. On my site you see this page:
http://www.vakantiewoningeninsuriname.nl/prijzen.html
Problem is that the picture below is on the right side of the page instead of the left like the other pictures.
On:
http://www.dorff.nl/prijzen.html
You can see how it should looks.. Pictures to the left and text on the right. Dont know what happened when im adding the Cuschy CMS. Hope you can see what is wrong.
Regards Brian
Date: Wed, 2 May 2012 13:04:14 -0600
From: [email protected]
To: [email protected]
Subject: Need some help after inserting CMS system
    Re: Need some help after inserting CMS system
    created by Nancy O. in Dreamweaver - View the full discussion
Change this:
Prijzen
Bij ons kunt u terecht met elk budget. Wij hebben woningen voor mensen die een langere tijd blijven maar ook voor vakantiegangers. Daarom hebben wij verschillende prijzen gehanteerd.
to this: <!Begin CushyCMS>
h2. Prijzen
Bij ons kunt u terecht met elk budget. Wij hebben woningen voor mensen die een langere tijd blijven maar ook voor vakantiegangers. Daarom hebben wij verschillende prijzen gehanteerd.
<!end CushyCMS>   Nancy O.Alt-Web Design & PublishingWeb | Graphics | Print | Media Specialists http://alt-web.com/http://twitter.com/altweb http://alt-web.blogspot.com/
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4374962#4374962
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4374962#4374962. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Dreamweaver by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

[SOLVED] Switch to systemd - Now system won't boot

I saw that todays update upgrade included the installation of systemd. I looked the wiki and did the necessary changes (I already had made the /etc/hostname etc. files). So I added the
init=/bin/systemd
line to grub and now my system won't boot. I get an error saying something about syslog service not enabled and then a black screen. I can boot my machine fine without the "init=/bin/systemd" line but I want to run a pure systemd system since Arch is moving to it anyway. In the wiki it mentions to install systemd-sysvcompat but it conflicts with initscripts it says. What am I doing wrong or missing?
Last edited by fettouhi (2013-12-08 14:42:04)

fettouhi wrote:
Thanks for the clarification about the DAEMONS list. My DAEMONS list is:
DAEMONS=(!hwclock ntpd syslog-ng !network netfs crond @alsa dbus networkmanager ufw cupsd avahi-daemon samba)
when I try to enable alsa and dbus I get this
[root@andre ~]# systemctl enable alsa-store.service
The unit files have no [Install] section. They are not meant to be enabled using systemctl.
[root@andre ~]# systemctl enable alsa-restore.service
The unit files have no [Install] section. They are not meant to be enabled using systemctl.
[root@andre ~]# systemctl enable dbus.service
The unit files have no [Install] section. They are not meant to be enabled using systemctl.
Is LVM handled automatically by systemd? The reason I ask is because I have the USELVM= set to YES in rc.conf.
I made the permanent transition to systemd and did not start alsa at all - sound works fine - so I never bothered with the alsa-store/alsa-restore service files at all - it just works! Also dbus gets handled by default in systemd so you don't need any starting of dbus service at all... it just works.

Stupidly partition hdd on window7 in IMAC A1311, and now I can not use the IMAC...... Need some help

Just bought a used IMAC A1311 core 2 duo, and there are something called Bootcamp and Window7 on it, and i log in to Window7 and stupidly partition hdd on it, and i think it has formatted everything. now the window7 is error and I do hold (alt) key when I start up the machines , it show only the window7 hdd and i don't see any Recoery HDD........what should i do? Really need some helps right now.........

There are several models that use A1311. So I don't know exactly what model you have. If you received installer discs with the computer, then you will need to boot from Disc 1, erase the drive, and install Snow Leopard. Some models in the A1311 line can use Internet Recovery:
Install Mavericks, Lion/Mountain Lion Using Internet Recovery
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Internet Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
Partition and Format the hard drive:
Select Disk Utility from the main menu and click on the Continue button.
After DU loads select your newly installed hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
Reinstall Lion/Mountain Lion. Mavericks: Select Reinstall Lion/Mountain Lion, Mavericks and click on the Install button. Be sure to select the correct drive to use if you have more than one.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
This should restore the version of OS X originally pre-installed on the computer.

Need some help: my itunes won't sync with my iphone anymore. Both softwares are up to date and I've reinstalled itunes. After I reinstall, it syncs. But then when I reboot my computer, it no longer syncs anymore and I have to keep reinstalling itunes. Tho

Need some help: my itunes won't sync with my iphone anymore. Both softwares are up to date and I've reinstalled itunes. After I reinstall, it syncs. But then when I reboot my computer, it no longer syncs anymore and I have to keep reinstalling itunes. Thoughts???

thought that it was possible to have the same iTunes library on any machine that was authorised, a kind of cloud-iTunes I guess.
That would convenient, but sadly it is not the case. Sorry!
Either way your welcome and best of luck!
B-rock

Hi! I got movies on my external hard drive that are AVI kind and won't play on my macbook pro? need some help please!!

Hi! I got Movies on my external hard drive that are AVI kind and won't play on my macbook pro? When I start playing the movie a message pops up and says "a required codec is not available". I tried flip4mac, xvid, divx already and still not playing my video. need some help please!! thanks.

Although vlc mentioned above is a much more powerful and better player you could try installing Perian if you insist on using the quicktime player. It may supply the codec it needs.
Not sure why you wouldn't be able to play straight avi files though in quicktime.

HT1222 I need some help.... I Have the iPhone 4S and downloaded the new software (6.0) and everything seems great so far except when I try to open a link in safari from a different app (messages, Facebook, ext..) it glitches and won't load. Any advice?

I need some help.... I Have the iPhone 4S and downloaded the new software (6.0) and everything seems great so far except when I try to open a link in safari from a different app (ie..messages, Facebook, ect..) it glitches and won't load. The blue loading bar will just jump back and forth and the page will not load properly if at all....

It sounds like you may have multiple problems, but none of them are likely to be caused by malware.
First, the internet-related issues may be related to adware or a network compromise. I tend to lean more towards the latter, based on your description of the problem. See:
http://www.adwaremedic.com/kb/baddns.php
http://www.adwaremedic.com/kb/hackedrouter.php
If investigation shows that this is not a network-specific issue, then it's probably adware. See my Adware Removal Guide for help finding and removing it. Note that you mention AdBlock as if it should have prevented this, but it's important to understand that ad blockers do not protect you against adware in any way. Neither would any kind of anti-virus software, which often doesn't detect adware.
As for the other issues, it sounds like you've got some serious corruption. I would be inclined to say it sounds like a failing drive, except it sounds like you just got it replaced. How did you get all your files back after the new drive was installed?
(Fair disclosure: I may receive compensation from links to my sites, TheSafeMac.com and AdwareMedic.com, in the form of buttons allowing for donations. Donations are not required to use my site or software.)

I bought a new song, but it won't play on my Mac or iPod. Everything is up to date. I need some help.

I bought a new song on itunes, but for some reason it won't play on my itunes library or Ipod. It skips to another song. Need some help on this if you can spare your time.

Hello
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
http://support.apple.com/kb/ts1389
Best of luck,
Mario

Hi, Someone Know why my charger is not working properly but always it was been working good but now when conect my iphone (3gs) shows a yellow triangle saying : Charging is not supported with this accessory. Please I need some help here. Thanks =D

Hi Someone Know why my charger is not working properly but always it was been working good but now when conect my iphone (3gs) appears a golden triangle saying :Charging is not Supported with this accessory. Please I Need Some Help Here. Thanks =D

sounds like the cable or the iphone connector are somehow damaged

Need some help here on the proper settings for quicktime exporting from imovie that won't degredate the footage from my handycam

need some help here on the proper setting for quicktime exporting that won't denegrate my footage from handycam canon fs200

What are the existing settings iMovie?
Al

Need some help with my thunderbolt!!!!!!

i was on it the night before. then at 4 am it goes to the HTC white screen and does nothing else but that. I have tried everything from rebooting to taking out my SD card. I need some help. Is there anyone out there?

Everyone, I'm so upset to hear that your phones aren't powering on. I'm hoping your issues have been resolved by now, but if not, I want to try a few more steps. Since removing the battery and charging aren't working, I suggest first trying to boot your phone into safe mode http://bit.ly/Nt3m5U. If no change, please try these steps. No information will be lost:
1. Boot into recovery
o Press and hold Power, Choose "Restart" option
o When screen turns off, press and hold Volume Down and Power
2. When the white HBOOT screen appears, use the volume button to move down to “RECOVERY.”
3. Press the Power button to select “RECOVERY.”
4. When the triangle and exclamation appears, hold the Volume Up and Power button at the same time.
5. Using the volume button, scroll down to “Wipe cache partition” and select it.
6. Select "Reboot system now"
Let me know if you still need assistance.
MarquiaF_VZW
Follow us on Twitter @VZWSupport

Need some help and guidance please!

Hi everyone,
I desperately need some help because I am at my wits end. In September I purchased a Compaq Presario CQ60-450US. Shortly after purchasing, I fresh installed Windows 7 Professional. Recently I decided to tried to dual boot ubuntu on the machine only to find that the installation failed because of CD read error. I know for a fact that the CD is not the issue because I have used this CD three other times to install ubuntu thus I came to the conclusion that the CD/DVD drive was bad.
I called HP support to get a new CD/DVD drive replaced only to spend 2 hours on the phone with a individual that decided to troubleshoot first trying to install ubuntu remotely (I informed the indiviual that the remote session would end), then by playing a DVD and "skipping throughout" the movie. He/she said that she could see no issue. (no diagnostic was run)I informed the individual that I had issues with buring as well. He/she proceeded to go online and install software asking me to demonstrate the issue after which the call got dropped mysteriously.
I called HP support back and told them that I am having an issue now burning. They proceed to connect remotely and look at the software the previous support individual downloaded and said that the software was not supported by HP. I informed the individual that I give permission to install any software needed to troubleshoot but the individual said that I could not be suppoted because I wasn't using the OS installed by HP. I was instructed to recover my machine to the OS that was installed with the machine if I was to continue to get support.
I informed the individual that the drivers and software are the same for either OS considering the CD/DVD rom is a plug and play device. The individual refused to help and told me I had lost my warranty because of my decision to install an OS directly from Microsoft or a third paper vendor.
That is where I stand. HP is refusing to give me support because I am not running their Vista Home edition even though my issue is hardware. I cannot find any warrent information stating that I need to have the original operating system installed on the machine to receive support. Can anyone point me to a reputable division that can help me with my issue? I feel I was just thrown aside so that they don't have to initiate a repair. If not has anyone filed a compalint against this outrageous support requirement?

Dear ndjumpball,
I would like to say that I have some good -- or at least encouraging -- advice. Regretfully, I do not. I had issues with my dv7 practically since purchasing it a year ago specifically so I would have a reliable computer for school. My first problem: I bought my laptop a mere 7 weeks before HP started offering their free upgrade to Windows 7. Consequently, I was forced to purchase the full installation retail or continue to deal with the wonton freezes and system failures that inevitably occurred while I was working on homework -- courtesy of HP's installation of Vista Home Premium 64-bit. Thankfully, I was able to purchase a copy of Windows 7 Professional 64-bit through a significant student discount offer from Microsoft, and I had my new OS downloaded the evening of October 23, 2009; I had to give their servers time to free up, since it seemed like everyone and their dogs were also downloading what the reviews posted on CNET and PC World touted as being more reliable. I recall (I can't remember exactly which site this appeared) the statement, "Windows 7 is what Vista should have been from the beginning."
I was all excited and happy now that I had a laptop for school that had everything I was looking for: decent size hard drive, a fair amount of RAM, great 17.3" display with awesome colors, and a CDRW/DVDRW/Blu-Ray disk drive in the bay. Not only was I very satisfied with the hardware; it also came with a decent host of software that are thought was pretty cool, too. It came with CyberLink's DVD Suite 6 that I could activate simply by touching a soft button above the keyboard. Aside from Vista Home Premium crashing on me at the most inopportune times, I was exceedingly happy with my $1000 purchase and investment. Then came the "upgrade" to Windows 7 Professional 64-bit...Because I didn't have a "compatible" version of Vista, I had to do a full ("custom") install. In other words, I lost all of the cool features I originally bought the machine for in the first place...no more cool one-finger's brush software activation (still don't have that working), and HP Chat Support told me the same thing they told you. The following is a direct copy/paste quote from an email response I received from HP Total Care: "In order to help you relevantly I would like to request you to please revert back to Vista operating system and check whether the issue is persisting or not. If the issue is still persisting after reverting the operating system back to vista then we need to perform system recovery."
After pursuing my case for 6 months -- finally getting my case escalated to two HP Customer Care Case Managers in Texas/Oklahoma -- the best "customer support" I received was what I'm sure was a truly heartfelt and sincere apology... Oh, neither case manager was "able" to send me either the true upgrade disks that would have preserved the features purchased, nor were they willing to send me a stand-alone installation of the CyberLink’s DVD Suite 6 that is currently offered with the HP Pavilion dv6t Quad Edition series. (In massive frustration and anger, I bought the CyberLink’s DVD software - $100 I didn't have to spend on something I had already bought...)
A month later (late March), MY CD-RW/DVD-RW/Blu-Ray drive stopped working. After an hour online with Customer Care, I had finally convinced the rep that the drive was working fine after my ditching Vista Home Premium, and that its failure had absolutely nothing to do with Windows 7 Pro. After giving the guy my credit card number as security, I had a replacement drive shipped to me.
My personal recommendation: clearly state that the hardware failure had nothing to do with whatever software or OS you chose to install. Bottom line: your computer is only 8 months old and is still covered under warranty, they can replace the defective part, or you can return the entire machine. You probably want to be the "Nice Guy" but you need to remind them that you have other brands available to purchase.
I don't know if that helps or not, but thank you for giving me the opportunity to vent! :-)

Need some help, system won't boot now.

Similar Messages

Maybe you are looking for