Need some help w/ home network!

Hi, Ive been at this for three days now and ive finaly given in!
*sighs*
I need some help....
Ive got a Linksys WRT54G v5 with two computers connecting to the internet through it. (both connect w/out incident, and the wireless is secured)
One computer is connected to the router with an Ethernet wire -
The other computer is connected to the router through its wireless adapter -
What my goal was, was to network the two computers together and share things between them. I was ultimatley going for was the ability to connect from either machine, and control the other one (if Im correct, I would use Remote Desktop Connection?)
Now ive read and tried some many things ranging from VPN, portforwards, so on and so....
Can this type of network be created? Im I being to ambisious with my goals as far as some type of remoted control? Please help, im so lost...

blanchardg wrote:
Hi, Ive been at this for three days now and ive finaly given in!
*sighs*
I need some help....
Ive got a Linksys WRT54G v5 with two computers connecting to the internet through it. (both connect w/out incident, and the wireless is secured)
One computer is connected to the router with an Ethernet wire -
The other computer is connected to the router through its wireless adapter -
What my goal was, was to network the two computers together and share things between them. I was ultimatley going for was the ability to connect from either machine, and control the other one (if Im correct, I would use Remote Desktop Connection?)
Now ive read and tried some many things ranging from VPN, portforwards, so on and so....
Can this type of network be created? Im I being to ambisious with my goals as far as some type of remoted control? Please help, im so lost...
Remote control of a networked computer in your home? Why? Share the folders that hold information/data and leave it to that.
I use a version of Symantec's PCAnywhere to remotely control a computer in my office from my home. That's because I live 7 miles away from my office. I get lazy, so remote control is my answer.
A+ Certified, over 15 years of hands on computer and home networking experience...and I still get lost!

Similar Messages

Hello, I need some help, my home button is not working

My home button is not working anymore. I don't know what really happened, but I can see that the button is under the screen level.

Try:
http://snapguide.com/guides/calibrate-your-home-button/?utm_expid=69945963-15
fix for Home button
iPhone Home Button Not Working or Unresponsive? Try This Fix
- If you have iOS 5 and later you can turn on Assistive Touch it add the Home and other buttons to the iPods screen. Settings>General>Accessibility>Assistive Touch
- If not under warranty Apple will exchange your iPod for a refurbished one for:
Apple - Support - iPod - Repair pricing
You can do it an an Apple store by:
Apple Retail Store - Genius Bar
or sent it in to Apple. See:
Apple - Support - iPod - Service FAQ
- There are third-party places like the following that will repair the Home button. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

In need of an external home network drive, help please...

Hi,
I am in need of an external home network drive in either 1 or 2TB form.
It will be for an imac and macbook pro + ps3 to use.
I saw this Western Digital one but was not sure how good it is -
http://www.wdc.com/en/products/products.aspx?id=300
I would be using it to back up HD final cut pro files a lot as well.
Please help.
Cheers

Ralph Landry1 wrote:
Over on the Tiger group one of the big hitters had unkind words for LaCie...becomes a matter of personal experience.
aye, indeed.
that's why i suggested the OP searches the forum for information on both drives
personally, i swear by LaCie drives. i like drives sold by [OWC|http://eshop.macsales.com/shop/firewire> too. alas, they seem to have no NAS on offer ...
JGG

Remote App on iPad connects but drops after about 20 mins. Need to turn off wait about 1 minute then turn on wifi on iMac before it can reconnect. Need some help please.

Remote App on iPad connects but drops after about 20 mins. Need to turn off wait about 1 minute, then turn on wifi on iMac before it can reconnect. Need some help please.
Already gone through troubleshooting guide a zillion times. Thanks.

This worked for me... A little time consuming but once you get rolling it goes GREAT... Thanks....
I got my artwork and saved it to my Desktop
Opened up Microsoft Paint and clicked on "File" and "Open" and found it to get it on the screen to resize it
Clicked "resize" and a box for changing it opened up
Checked the box "Pixels" and "Unchecked maintain aspect ratio"
Set Horizontal for 640 and Vertical for 480
Clicked on "OK" and went back to "File" and did a "Save As" and chose JPEG Picture
It came up "File Already Existed" and clicked "OK" (really did not care about the original artwork I found because wrong size)
Went to iTunes and on the movie right clicked on "Get Info", clicked on "Details", then "Artwork"
Go to the little box on the top left that shows your old artwork and click on it to get the little blue border to appear around it and hit "Delete" to make it gone
Click on "Add Artwork" and find it where you put the one from above on your Desktop and hit "Open" and OK and your new artwork is now there and all good.
Sounds like a lot of steps to follow but after around 5 or so you will fly through it. This worked perfect on my iPhone 6 Plus and I have artwork on my Home Videos now.

My airport problem has returned big time --Need some Help!!

Aloha once again:
I though that this was fixed by simply changing channels on my airport router, but that fix only lasted for a few days, but now it's back and even worse. Let me give you some background on this problem. Here's my original message concerning the problem:
I have my Airport Router connected to the Internet via DSLcable. I then tie my two computers into the internet via their airport cards. For about 6 months this system has been working just fine. Recently my desktop computer quit listening to the router and can no longer connect to the internet. It shows no signal strength and the name of the network on the Airport is not seen in the "connect to internet" panel. The same Airport works just fine on my LapTop and I am using it right now to get this message off to the internet.
I have fixed permissions, removed the airport card and cleaned the connector, the antenna plug and removed the system configuration folder from library preferences all to no avail!
This problem has been hounding me, intermittently, for over a year now What can I do to remedy this??? HELP!!!!
Dan Page
Maui, Hawaii
The suggestion to change channels, that came from this original request, worked but just for a very short time. Now I have to shut down my computer overnight to get connected and then it only lasts for several hours and the connection quits.
I thought maybe heat was a problem, but the last time it happened I opened the computer and played a large fan right on the card. This did not help. I shut it down for the night and it was fine the next morning for about 2 hours.
One new data point; if I turn off just the airport on my laptop computer overnight, that will fix the problem for a short time also.
Still need some help!!!
Dan

First, power off both the Time Capsule and AirPort Express.
Wait a few minutes, then power up the Time Capsule first, and let it run for a few minutes.
Temporarily, move the AirPort Express to the same room or close proximity to the AirPort Express and power it up.
If the Express powers up correctly, power it off again and move it approximately half the distance between the Time Capsule and the general area that needs more wireless coverage. Try to minimize obstructions like walls, ceiling, heavy furniture, etc as much as possible.
Please report on your results.

My iphone 4 has switch of itself, and cant switch on its blankout , i need some help to solve this matter, My iphone 4 has switch of itself, and cant switch on its blankout , i need some help to solve this matter

i need some help! my i phone has switch off totally blank as if there is no baterry, i cant wsitch on anymore, i live in Africa whereby there is no any apple offises arroung, i want to find a solution thats why i am asking for the help

Plug in iPhone with Wall Charger for 10 minutes, it may turn on itself. If not, keep on Wall Charger and Reset, hold both Home and Power buttons until the iPhone begins to restart. This usually takes less than 20 seconds of holding both buttons.

Need some help with putting a folder in users directory

I'm not sure how to do this, but what I want to do is put this file in C:/My Documents, but I need to be able to verify that C://My Documents exists, if not put it in C:/Program Files.
Can any one help me out?
try {
                    String[] contactArray = parseDatFile(fc.getSelectedFile());
                    Document document = createXMLDocument(contactArray);
                    saveToXMLFile(
                    document,
                    new File(
                    "C:/Program Files/xxx/",// looks for directory for list
                    "xxxxxxxxxxxxxxxxxxxxxxxxxxxx"));
                } catch (Exception exc) {
                    File f = new File("C:/Program Files/xxx/");// setting directory for list if not there
                    boolean yes = true;
                    yes = f.mkdir();// creating directory
                    try {
                        String[] contactArray = parseDatFile(fc.getSelectedFile());
                        Document document = createXMLDocument(contactArray);
                        saveToXMLFile(
                        document,
                        new File(
                        "C:/Program Files/xxx/",// used only if the directory didn't exist
                        "xxxxxxxxxxxxxxxxxxxxxxx"));

Need some help with putting a folder in users directoryI recomend using System.getProperty( "user.home" ) not a hard-coded value.
This will use the users home folder ( C:\My Documents ) on Win9X (I guess), C:\Documents and Settings\<current user> on Win2K +, and ~ on Unix-a-likes.

We have a set of oracle clients running on T5220 zones that need some help

Greetings all -
We have a set of oracle clients running on T5220 zones that need some help.
If, for example, I execute the query "select (all) from dba_objects", trace output reports 90% of the elapsed time spent under "SQLNet message from client".
Here are OS details for the clients: Solaris 10 5/08 s10s_u5wos_10 SPARC
Running "uname -a" from the client gives:
(SunOS bmc-ste-app 5.10 Generic_127127-11 sun4v sparc SUNW,SPARC-Enterprise-T5220)
Here are OS details for the dataserver: Enterprise Linux Enterprise Linux Server release 5.2
Running "uname -a" from the dataserver gives:
(2.6.18-92.1.6.0.2.el5 #1 SMP Thu Jun 26 17:44:55 EDT 2008 x86_64 x86_64 x86_64 GNU/Linux)
The RDBMS is 10.2.0.4
Again, please note, there is no application in the picture here. We are just running a simple catalog query (select * from dba_objects) from sqlplus. Why the wait on something like this? The wait also occurs when a different query is used (select (all) from SYS.COL$ where rownum < 50000). And it doesn't matter if I used the full client or the instant client. I still get the same high-wait.
We had thought - maybe this is a network thing - so we put a test client on the same subnet as the dataserver. This helped - but not enough. The wait is still way too high even with firewalls taken out of the equation.
We've also looked at arraysize, SDU, kernel settings. And we've spent time going over tkprof, truss and sqlnet-tracing.
Has anyone ever had to solve this HIGH WAIT ON CLIENT issue? Is there a work around or some tweak I'm missing.
Is anyone configured like we are (linux dataserver, solaris clients)? If so - did you see anything like this?
tia -
Jim
Edited by: jim1768 on Mar 31, 2010 1:47 PM
Edited by: jim1768 on Mar 31, 2010 2:12 PM
Edited by: jim1768 on Mar 31, 2010 2:13 PM

Hello,
We have the exact same issue. Did you ever solve this issue? We have a t5220 and have just upgraded our 11.5.10.2 11i system on it from 9.2.0.8 32-bit sparc to 11.2.0.1 64-bit sparc. Things should be faster but arent, and our consultant has tracked it down to high wait times when the apps tier using forms connects to the database tier on the same box. So even though the t5220 is both server and client, there is something about the client sql connection.through TNS that his having trouble. Thanks for any information. We've also created an S/R with Oracle.
Note: I am well aware of the other issues with the CMT server series but this particular issue seems independent of the regular / known issues and remains a mystery to us. Other known issues with the CMT servers for SPARC:
Metalink Note 781763.1 (Migration from fast single threaded CPU machine to CMT UltraSPARC T1 & T2)
http://blogs.sun.com/glennf/resource/Optimizing_Oracle_CMT_v1.pdf
http://blogs.sun.com/glennf/tags/throughput
http://blogs.sun.com/glennf/entry/getting_past_go_with_sparc
http://www.oracle.com/apps_benchmark/doc/E-Bus-11i-PAY_ORA_SUN-T5220.pdf (this paper has some oracle init settings at the end. The kernel settings have been included in the OS upgrade)
http://blogs.sun.com/mandalika/entry/siebel_on_sun_cmt_hardware

HT1222 I need some help.... I Have the iPhone 4S and downloaded the new software (6.0) and everything seems great so far except when I try to open a link in safari from a different app (messages, Facebook, ext..) it glitches and won't load. Any advice?

I need some help.... I Have the iPhone 4S and downloaded the new software (6.0) and everything seems great so far except when I try to open a link in safari from a different app (ie..messages, Facebook, ect..) it glitches and won't load. The blue loading bar will just jump back and forth and the page will not load properly if at all....

It sounds like you may have multiple problems, but none of them are likely to be caused by malware.
First, the internet-related issues may be related to adware or a network compromise. I tend to lean more towards the latter, based on your description of the problem. See:
http://www.adwaremedic.com/kb/baddns.php
http://www.adwaremedic.com/kb/hackedrouter.php
If investigation shows that this is not a network-specific issue, then it's probably adware. See my Adware Removal Guide for help finding and removing it. Note that you mention AdBlock as if it should have prevented this, but it's important to understand that ad blockers do not protect you against adware in any way. Neither would any kind of anti-virus software, which often doesn't detect adware.
As for the other issues, it sounds like you've got some serious corruption. I would be inclined to say it sounds like a failing drive, except it sounds like you just got it replaced. How did you get all your files back after the new drive was installed?
(Fair disclosure: I may receive compensation from links to my sites, TheSafeMac.com and AdwareMedic.com, in the form of buttons allowing for donations. Donations are not required to use my site or software.)

Need some help after inserting CMS system

Hi on my site ive inserted an CMS system from Cushy. It all work that isnt the problem. The problem is that my page is a mess now.. The only thing ive addes is a cms code so im hoping the solution isnt hard to do.
There are three pages that are complete changed.
The home page
http://www.vakantiewoningeninsuriname.nl/index.html
The text colomn right under is moved.How can i place this back?
on http://www.dorff.nl/ you can see how it was before i add the CMS.
The next page is:
http://www.vakantiewoningeninsuriname.nl/bezienswaardighedenparamaribo.html
You can see there is a lot extra space between the head and the text. And you see that the text is not only at the right side anymmore.
This is how it should be:
http://www.dorff.nl/bezienswaardighedenparamaribo.html
The same goes for this page:
http://www.vakantiewoningeninsuriname.nl/prijzen.html
And this is how it have to be:
http://www.dorff.nl/prijzen.html
Hope you can help, thank you for looking..
Regards Brian

Dear Nancy,
Thank you for your response,
I will try to explain again what is wrong. On my site you see this page:
http://www.vakantiewoningeninsuriname.nl/prijzen.html
Problem is that the picture below is on the right side of the page instead of the left like the other pictures.
On:
http://www.dorff.nl/prijzen.html
You can see how it should looks.. Pictures to the left and text on the right. Dont know what happened when im adding the Cuschy CMS. Hope you can see what is wrong.
Regards Brian
Date: Wed, 2 May 2012 13:04:14 -0600
From: [email protected]
To: [email protected]
Subject: Need some help after inserting CMS system
    Re: Need some help after inserting CMS system
    created by Nancy O. in Dreamweaver - View the full discussion
Change this:
Prijzen
Bij ons kunt u terecht met elk budget. Wij hebben woningen voor mensen die een langere tijd blijven maar ook voor vakantiegangers. Daarom hebben wij verschillende prijzen gehanteerd.
to this: <!Begin CushyCMS>
h2. Prijzen
Bij ons kunt u terecht met elk budget. Wij hebben woningen voor mensen die een langere tijd blijven maar ook voor vakantiegangers. Daarom hebben wij verschillende prijzen gehanteerd.
<!end CushyCMS>   Nancy O.Alt-Web Design & PublishingWeb | Graphics | Print | Media Specialists http://alt-web.com/http://twitter.com/altweb http://alt-web.blogspot.com/
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4374962#4374962
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4374962#4374962. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Dreamweaver by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Need some help with ".png" image.

Good day everyone. Here's the run down. I need to add an
image (image "A") ontop of another image (image"B"). Image "B" is a
paterned background. And Image "A" a logo with a transparent
background.
As it stands I have image "A" as a "png" and as you know....
they are fri**ing huge! Haveing it as a "gif" only presents me with
the IE6 problem of it adding a colored background to the image.
So I'm stuck! Can any one tell me or point me in the
difection of a tutorial to tell me the best way to add an image
with a transparent background in Dreamweaver.
Really need some help with this!
Thanks all!

>Right you can see the work in progress here>
http://www.stclairecreative.com/DoughBoys_Site_Folder/home.html
Before going much further I'd recommend reconsidering the use
of a textured background. They are usually included for the benefit
of the site owner only, and likely to annoy visitors. Studies on
the subject suggest they often lead to usability problems. I do
like to header graphic, but at 200K it's kinda heavy and can
probably be optimized.

Need some help with sound quality

Hi guys, new here. I'm working on creating an album on my own. Bass and vocals are real, everything else is using software instruments. I have about 8 songs done, but the problem is I don't really know what I'm doing as far as recording and levels go.
I'm using studio headphones and everything sounds fantastic through them, and even pretty good if I just hook up some earbuds, but when I bounce out a track and burn them to do a disc and play it in my car, it sounds awful. Suddenly the guitar is too low, drums are too loud.
I really need some help here. I'm even willing to pay someone to get me on the right track. Using paypal or whatever.

AecDuck wrote:
Where's the fun in that? Maybe you have different motives, but I got into home recording because I like doing things myself, even if I have to learn the hard way. If you know enough to get good bass and vocal recordings and mix that with virtual instruments, then you are well on your way to making a decent sounding mix. Mixing in headphones can be very deceiving. Things simply sound different in headphones. You need some monitors, even if they are crappy because if you can get it to sound good in crappy monitors it will likely sound good on other speakers.
The fun and experience comes from getting a good balance that sounds good in headphones, and in the monitors, and in your home stereo, and in your car stereo. Use the different audio systems as a reference. If the drums are too quiet in the car, bring them up a bit. If the bass is too loud in your headphones, put them down a bit.
If you bring in your recordings to be mixed by somebody else, first of all you're going to end up paying hundreds, if not $1000+ dollars, even in a sub-par studio. Secondly, it's never going to sound how you want it to sound. It's going to sound how THEY want it to sound.
I know it takes longer, and it's hard work, but you will have such a tremendous amount of satisfaction when your project is done knowing that YOU recording it, and YOU mixed it on YOUR equipment. It will be 100% yours.
Where's the fun? How about the fun in interacting with another human being? How about the satisfaction in having another validate what you've been trying to produce?
I don't think it's helpful to make generalizations about what type of experience the OP might have in getting professional help. I have had good experiences working with mixing engineers, and perhaps I have just been lucky, but I've been able to produce music that sounded how I wanted it to sound, but at a level beyond which my skill at the time would have been able to produce, AND I gained some insights to help me in the future.
It IS satisfying to teach yourself a new skill. And it takes a lot of patience, trial and error, and you might miss the mark more often than you hit it. If you're in a rush, it might be a viable solution to contact some studios and see if you can work with them. Learning from others is perfectly acceptable.

My iPhone 3g has 2 white horizontal lines i don't know where did it came from. I turn it off then on but its still there. the lines spreads everyday. I dont know how to fix it. need some help guys.

my iPhone 3g has 2 white horizontal lines i don't know where did it came from. I turn it off then on but its still there. the lines spreads everyday. I dont know how to fix it. need some help guys.

If you take a screenshot (Press the home button and Lock button at the same time), does it appear on the screenshot? Zoom in on the screenshot and see if it's still there.
If not, then your display is failing. I would recommend taking it to an Apple Store if you can, if you can't then to an authorised Apple reseller.
If it does appear on the screenshot when you zoom into the spot, then it's a really weird software issue! You might have to backup and restore the device.
Let me know!
xeni

Need some help with Flash + Captivate (ActionScript in Flash)

I have what I think is a fairly simple question.... I have an SWF File embedded in a Captivate 4 Presentation. The SWF requires the user to click on a variety of items, after they have gone through all the required items a "FINISH" button appears... I want the finish button to "close" the SWF file.
I'll add this info to in case it helps with the "right" answer....
The reason I am doing this is because Captivate automatically rolls from one "slide" to the next. The only way to stop this is to add a "pause" button to the slide, I want the user to have to finish the SWF before they can see the "next" button in the captivate file...So I was thinking, put the "swf" over the "next" button... then have the "complete" button close the swf revealing the covered "next" button in captivate....
The short version of what I need is information on closing an SWF file via a button click. Is there a "swf.visible=false" or anything like that?

Need some help with putting a folder in users directoryI recomend using System.getProperty( "user.home" ) not a hard-coded value.
This will use the users home folder ( C:\My Documents ) on Win9X (I guess), C:\Documents and Settings\<current user> on Win2K +, and ~ on Unix-a-likes.

Need some help frist time useing dreamweaver

Hey all,
I am totaly new to Dreamweaver and am needing some help. I am
needing to make a feedback form. Would need it to e-mail me the
feedback to something like [email protected] I also need to know
how to make a footer for the copyright and desiged by, on each page
without having to manually entering them. Any help I could get
would be awsome.

There are only two ways to process form data -
1. Use mailto:[email protected] as the action of the form
2. Use a server-side scripting method to a) harvest the
form's data, b)
process it in some manner, e.g., enter it into a database, c)
formulate and
send an email to one or more email recipients, and d)
redirect the visitor
to some ending page
Method 1 is quite simple, and is also the least reliable. It
depends both
on your visitor having an email client already installed on
their computer -
this eliminates public computers, or home users without email
clients
installed (more and more it seems) - and on the installed
email client
responding to
the mailto call. It is not possible to use this method *and*
send the
visitor to a
thank you page as well.
Method 2a is the preferred method, since it eliminates the
problems of
method
1, but it means that you have to grapple with
server-scripting somehow (ASP,
CF, PHP, perl, etc.).
Method 2b would be to use some third-party form processing,
like
http://www.bebosoft.com/products/formstogo/.
You would have to decide which of these methods is best for
your needs,
but if it's Method 2a, then start by asking your host what
they provide for
form
processing. If it's 2b, then read their FAQ/instructions
carefully.
For your footer, investigate the use of DW's Templates (use
F1 Help to read
about them), or of server-side includes (again, F1 Help will
give you some
info here, as will Google).
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Xysos_Designs" <[email protected]> wrote in
message
news:[email protected]...
> Hey all,
> I am totaly new to Dreamweaver and am needing some help.
I am needing to
> make
> a feedback form. Would need it to e-mail me the feedback
to something like
> [email protected] I also need to know how to make a
footer for the
> copyright
> and desiged by, on each page without having to manually
entering them. Any
> help
> I could get would be awsome.
>

Need some help w/ home network!

Similar Messages

Maybe you are looking for