Need some help with method for calendar

Hi all,
I've got to design a claendar for college but I'm not allowed use any one the Java calendar classes so I've but up a number of methods to get the start days of months etc.
At the moment I'm trying to get a method working tha will loop around 12 times and assign the days in the month to a string array for printing later in another function but to test I'm printing to screen.
At the moment when I get the days to print on screen It shows me the days for Janurary similar to below 12 times and I've been looking at it so long I can't see the wood for the trees and I was just wondering if someone can point out when I'm going wrong here.
1 2 3 4 5 6
7 8 9 10 11 12 13
14 15 16 17 18 19 20
21 22 23 24 25 26 27
28 29 30 31
The data for the start days and total number of days in a month are held in arrays in seperate methods as well.
With the following code I'm just getting the days for Jan to print out 12 times.
I thnik the the problem is with the first part of the while loop It does not appear to be looping throught the DaysIn and TopLeft arrays as if I manually change the value of the variable l = 1; I get the days for Feb to print out.
           static int [] DaysIn (int y) //  return correct day in month
         int [] LDays = {31, 29, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31}; // leap year.
         int [] Days = {31, 28, 31, 30, 31, 31, 31, 30, 30, 31, 30, 31};
     if (y%4==0 && (y%100!=0 || y%400==0)) // test if y is a leap year. y is gotten from print cal.
         return LDays;
     else               
        return Days;
static int [] TopLeft (int y) // find the starting position of the days in a month for printing
        int [] k = StartDay(y);
        int [] TopLeft = new int [12];
        int t = 0;
       while (t!=12)
     TopLeft[t] = 1- k[t];
     t++;
       return TopLeft;
static String [] DispMonthDays(int y) // Method to supply the days of a month in grid form needs work.
     int k = 0; // int to take the topleft value for each month
     int DIM = 0; // int to take the total days in each month
    String MonthD=""; // empty string
     String [] MonthDay = new String [6];
     int l= 0;
               While(l!=12)
          k = TopLeft(y)[l]; // Believe problem lies at these two lines
          DIM = DaysIn(y)[l];  //
            while (k != 42)
             if (k < 1){MonthD = MonthD + " "+" "+" ";}
                                  else if (k >=1 && k <=9){MonthD = MonthD + " "+ k +" ";}
                else if (k >= 10 && k <= DIM){MonthD = MonthD + k + " ";}
                else if(k > DIM){MonthD = MonthD +" ";}
                k++;     
          MonthDay[0] = MonthD.substring(0,20);
          MonthDay[1] = MonthD.substring(21,41);
          MonthDay[2] = MonthD.substring(42,62);
          MonthDay[3] = MonthD.substring(63,83);
          MonthDay[4] = MonthD.substring(84,104);
          MonthDay[5] = MonthD.substring(105,106);
     l++;}
     return MonthDay;
static void PrintCal(int y) // function to hand off year and print cal
     int upstep=0;
    int count=0;
    while (count !=12)
          while (upstep!=6)
             System.out.print(DispMonthDays(y)[upstep]);System.out.println();
               upstep++;
          upstep=0;
          count++;
}Any help greatly appreciated

Given the previous valid comment here is my code again.
I'm running the code on the console
   // Months of year          
                static final String [] MNames  = {"January ", "February ", "March ", 
                    "April ",   "May ",      "June ",
                    "July ",    "August ",   "September ",
                     "October ", "November ", "December "};
     static int [] daysIn (int y) // see if y is a leap year and return correct day in month
           int [] LDays = {31, 29, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31}; // leap year.
           int [] Days = {31, 28, 31, 30, 31, 31, 31, 30, 30, 31, 30, 31};
          if (y%4==0 && (y%100!=0 || y%400==0)) // test if y is a leap year. y is gotten from printCal.
          return LDays;
          else               
          return Days;
                static int [] startDay(int y) // Find First Day of a month
          int [] z = daysIn(y);
          int firstDay =((y-1900)*365 +(y-1901)/4)%7;
          int x = 0;
         int [] startDay = new int [12];
         while (x!=12)
          if (x==0)
             {startDay[0] = firstDay; firstDay = (firstDay+z[0])%7;}
          else
             {startDay[x] = firstDay; firstDay = (firstDay+z[x])%7;}
          x++;
          return startDay;
       static int [] topLeft (int y) // find the starting position of the days in a month for printing
          int [] k = startDay(y);
          int [] topLeft = new int [12];
          int t = 0;
                                     while (t!=12)
                   topLeft[t] = 1- k[t];
                                          t++;
          return topLeft;
       static String [] dispMonthDays(int y) // Method to supply the days of a month in grid form needs work.
             int k = 0; // int to take the topleft value for each month
             int dim = 0; // int to take the total days in each month               
                        String monthD=""; // empty string
             String [] monthDay = new String [6]; // String Array to take the results of MonthD  and be returned 12 tmes
          int loopThrough= 0; // int variable to progress through the topLeft and daysIn arrays
          while(loopThrough !=12)
                 k = topLeft(y)[loopThrought]; // Not being moved through as far as I can see
                dim = daysIn(y)[loopThrough];
                      while (k != 42)
                 if (k < 1){monthD = monthD + " "+" "+" ";}
                    else if (k >=1 && k <=9){monthD = monthD + " "+ k +" ";}
                   else if (k >= 10 && k <= dim){monthD = monthD + k + " ";}
                   else if(k > dim){monthD = monthD +" ";}
                   k++;}
                 monthDay[0] = monthD.substring(0,20);
                 monthDay[1] = monthD.substring(21,41);
                 monthDay[2] = monthD.substring(42,62);
                 monthDay[3] = monthD.substring(63,83);
                 monthDay[4] = monthD.substring(84,104);
                 monthDay[5] = monthD.substring(105,106);
               l++;
          return monthDay;
   static void printCal(int y) // function to hand off year and print cal amended for testing to see if dispMonthDays is working
     int count=0;
     int upstep=0; // int variable to return the monthDay
                      while (count !=12)
          while (upstep!=6)
                  System.out.print(dispMonthDays(y)[upstep]);
                   upstep++;
           upstep=0;
          count++;
  public static void main (String [] args)
     Scanner input = new Scanner (System.in);
     System.out.print("Enter a year: "); int year = input.nextInt();
         printCal(year);
              I still think the problem is with the first loop in dispMonthDays

Similar Messages

  • Need some help with tools for java projects

    Hi Friends,
    I just want to know what software release management tool do you use.Is there any free tool available on net??
    I do not need a subversion tool( cvs,svn etc) or a automation build tool ( luntbuild, cruisecontrol, anthill) , I am looking for some tool,that helps you manage the release after its made.For example,i would like to track down which release was made to which customer on which date,how many releases were made to any particular customer,what source code was shipped to the customer..and so on....
    Is there any such tool that can accomplish this???
    Thanks

    Hi Friends,
    I just want to know what software release management tool do you use.Is there any free tool available on net??
    I do not need a subversion tool( cvs,svn etc) or a automation build tool ( luntbuild, cruisecontrol, anthill) , I am looking for some tool,that helps you manage the release after its made.For example,i would like to track down which release was made to which customer on which date,how many releases were made to any particular customer,what source code was shipped to the customer..and so on....
    Is there any such tool that can accomplish this???
    Thanks

  • Need some help with threads...

    Hello all,
    I am working on a project at work, and I am not the best programmer in the world. I have been trying to get my head around this for a couple of days and just cannot get it to work.
    I am writing an instrumentation control program that will have three threads. One is the GUI, one will receive control information and set up the hardware, and one will check the hardware status and report it to the GUI periodically. I plan on using the invokeLater() method to communicate the status to the GUI and change the status display in the GUI. Communication from the GUI to the controller thread and from the status thread to the controller thread I had planned on being piped input/output stream as appropriate. I have a control class and a status class that need to be communicated over these piped streams. In some trial code I have been unable to wrap the piped input/output streams with object input/output streams. I really need some help with this. Here is the main thread code:
    package playingwiththreads1;
    import java.io.*;*
    *public class PlayingWithThreads1 {*
    public static void main(String[] args) {*
    * PipedOutputStream outputPipe = new PipedOutputStream();*
    * ObjectOutputStream oos = null;*
    * ReceiverThread rt = new ReceiverThread(outputPipe);*
    // Start the thread -- First try*
    * Thread t = new Thread(rt);*
    t.start();*
    // Wrap the output pipe with an ObjectOutputStream*
    try*
    oos = new ObjectOutputStream(outputPipe);*
    catch (IOException e)*
    System.out.println(e);*
    // Start the thread -- Second try*
    //Thread t = new Thread(rt);*
    //t.start();*
    /** Send an object over the pipe. In reality this object will be a
    class that contains control or status information */
    try
    if (!oos.equals(null))
    oos.writeObject(new String ("Test"));
    catch (IOException e)
    try
    Thread.sleep(5000);
    catch (InterruptedException e)
    I read somewhere that it matters where you start the thread relative to where you wrap piped streams with the object streams. So, I tried the two places I felt were obvious to start the thread. These are noted in the comments. Here is the code for the thread.
    package playingwiththreads1;
    import java.io.*;
    public class ReceiverThread implements Runnable {
    private PipedInputStream inputPipe = new PipedInputStream();
    private ObjectInputStream inputObject;
    ReceiverThread (PipedOutputStream outputPipe)
    System.out.println("Thread initialization - start");
    try
    inputPipe.connect(outputPipe);
    inputObject = new ObjectInputStream(inputPipe);
    catch (IOException e)
    System.out.println(e);
    System.out.println("Thread initialization - complete");
    public void run()
    System.out.println("Thread started");
    try
    if (inputObject.available() > 0)
    System.out.println(inputObject.read());
    catch (IOException e)
    System.out.println(e);
    Through testing I have determined that no matter where I start the thread, the thread never gets past the "inputObject = new ObjectInputStream(inputPipe);" assignment.
    Could someone please help me with this? There are other ways for me to write this program, but this is the one that I would like to make work.
    Many thanks in advance,
    Rob Hix
    Edited by: RobertHix on Oct 6, 2009 3:54 AM

    Thanks for the help, but that did not work. I tried flushing the ObjectOutputStream and it is still hanging when initializing the thread.
    Here is a better look at the code since I was helped to figure out how to insert it:
    The main method:
    package playingwiththreads1;
    import java.io.*;
    public class PlayingWithThreads1 {
        public static void main(String[] args) {
            PipedOutputStream outputPipe = new PipedOutputStream();
            ObjectOutputStream oos = null;
            ReceiverThread rt = new ReceiverThread(outputPipe);
            // Start the thread -- First try
            //Thread t = new Thread(rt);
            //t.start();
            // Wrap the output pipe with an ObjectOutputStream
            try
                oos = new ObjectOutputStream(outputPipe);
                oos.flush();
            catch (IOException e)
                System.out.println(e);
            // Start the thread -- Second try
            Thread t = new Thread(rt);
            t.start();
            /* Send an object over the pipe.  In reality this object will be a
             * class that contains control or status information */
            try
                if (!oos.equals(null))
                    oos.writeObject(new String ("Test"));
                    oos.flush();
            catch (IOException e)
                System.out.pringln(e);
            try
                Thread.sleep(5000);
            catch (InterruptedException e)
    }The thread code:
    package playingwiththreads1;
    import java.io.*;
    public class ReceiverThread implements Runnable {
        private PipedInputStream inputPipe = new PipedInputStream();
        private ObjectInputStream inputObject;
        ReceiverThread (PipedOutputStream outputPipe)
            System.out.println("Thread initialization - start");
            try
                inputPipe.connect(outputPipe);
                inputObject = new ObjectInputStream(inputPipe);
            catch (IOException e)
                System.out.println(e);
            System.out.println("Thread initialization - complete");
        public void run()
            System.out.println("Thread started");
            try
                if (inputObject.available() > 0)
                    System.out.println(inputObject.read());
            catch (IOException e)
                System.out.println(e);
    }Does anyone else have and ideas?

  • Please I need some help with a table

    Hi All
    I need some help with a table.
    My table needs to hold prices that the user can update.
    Also has a total of the column.
    my question is if the user adds in a new price how can i pick up the value they have just entered and then add it to the total which will be the last row in the table?
    I have a loop that gets all the values of the column, so I can get the total but it is when the user adds in a new value that I need some help with.
    I have tried using but as I need to set the toal with something like total
        totalTable.setValueAt(total, totalTable.getRowCount()-1,1); I end up with an infinite loop.
    Can any one please advise on some way I can get this to work ?
    Thanks for reading
    Craig

    Hi there camickr
    thanks for the help the other day
    this is my full code....
    package printing;
    import java.awt.*;
    import java.awt.event.*;
    import java.awt.print.*;
    import javax.swing.*;
    import javax.swing.table.*;
    import java.text.DecimalFormat;
    public class tablePanel
        extends JDialog  implements Printable {
      BorderLayout borderLayout1 = new BorderLayout();
      private boolean printing = false;
      private Dialog1 dialog;
      JPanel jPanel = new JPanel();
      JTable table;
      JScrollPane scrollPane1 = new JScrollPane();
      DefaultTableModel model;
      private String[] columnNames = {
      private Object[][] data;
      private String selectTotal;
      private double total;
      public tablePanel(Dialog1 dp) {
        dp = dialog;
        try {
          jbInit();
        catch (Exception exception) {
          exception.printStackTrace();
      public tablePanel() {
        try {
          jbInit();
        catch (Exception exception) {
          exception.printStackTrace();
      private void jbInit() throws Exception {
        jPanel.setLayout(borderLayout1);
        scrollPane1.setBounds(new Rectangle(260, 168, 0, 0));
        this.add(jPanel);
        jPanel.add(scrollPane1, java.awt.BorderLayout.CENTER);
        scrollPane1.getViewport().add(table);
        jPanel.setOpaque(true);
        newTable();
        addToModel();
        addRows();
        setTotal();
    public static void main(String[] args) {
      tablePanel tablePanel = new  tablePanel();
      tablePanel.pack();
      tablePanel.setVisible(true);
    public void setTotal() {
      total = 0;
      int i = table.getRowCount();
      for (i = 0; i < table.getRowCount(); i++) {
        String name = (String) table.getValueAt(i, 1);
        if (!"".equals(name)) {
          if (i != table.getRowCount() - 1) {
            double dt = Double.parseDouble(name);
            total = total + dt;
      String str = Double.toString(total);
      table.setValueAt(str, table.getRowCount() - 1, 1);
      super.repaint();
      public void newTable() {
        model = new DefaultTableModel(data, columnNames) {
        table = new JTable() {
          public Component prepareRenderer(TableCellRenderer renderer,
                                           int row, int col) {
            Component c = super.prepareRenderer(renderer, row, col);
            if (printing) {
              c.setBackground(getBackground());
            else {
              if (row % 2 == 1 && !isCellSelected(row, col)) {
                c.setBackground(getBackground());
              else {
                c.setBackground(new Color(227, 239, 250));
              if (isCellSelected(row, col)) {
                c.setBackground(new Color(190, 220, 250));
            return c;
        table.addMouseListener(new MouseAdapter() {
          public void mouseClicked(MouseEvent e) {
            if (e.getClickCount() == 2) {
            if (e.getClickCount() == 1) {
              if (table.getSelectedColumn() == 1) {
       table.setTableHeader(null);
        table.setModel(model);
        scrollPane1.getViewport().add(table);
        table.getColumnModel().getColumn(1).setCellRenderer(new TableRenderDollar());
      public void addToModel() {
        Object[] data = {
            "Price", "5800"};
        model.addRow(data);
      public void addRows() {
        int rows = 20;
        for (int i = 0; i < rows; i++) {
          Object[] data = {
          model.addRow(data);
      public void printOut() {
        PrinterJob pj = PrinterJob.getPrinterJob();
        pj.setPrintable(tablePanel.this);
        pj.printDialog();
        try {
          pj.print();
        catch (Exception PrintException) {}
      public int print(Graphics g, PageFormat pageFormat, int pageIndex) throws PrinterException {
        Graphics2D g2 = (Graphics2D) g;
        g2.setColor(Color.black);
        int fontHeight = g2.getFontMetrics().getHeight();
        int fontDesent = g2.getFontMetrics().getDescent();
        //leave room for page number
        double pageHeight = pageFormat.getImageableHeight() - fontHeight;
        double pageWidth =  pageFormat.getImageableWidth();
        double tableWidth = (double) table.getColumnModel().getTotalColumnWidth();
        double scale = 1;
        if (tableWidth >= pageWidth) {
          scale = pageWidth / tableWidth;
        double headerHeightOnPage = 16.0;
        //double headerHeightOnPage = table.getTableHeader().getHeight() * scale;
        //System.out.println("this is the hedder heigth   " + headerHeightOnPage);
        double tableWidthOnPage = tableWidth * scale;
        double oneRowHeight = (table.getRowHeight() +  table.getRowMargin()) * scale;
        int numRowsOnAPage = (int) ( (pageHeight - headerHeightOnPage) / oneRowHeight);
        double pageHeightForTable = oneRowHeight *numRowsOnAPage;
        int totalNumPages = (int) Math.ceil( ( (double) table.getRowCount()) / numRowsOnAPage);
        if (pageIndex >= totalNumPages) {
          return NO_SUCH_PAGE;
        g2.translate(pageFormat.getImageableX(), pageFormat.getImageableY());
    //bottom center
        g2.drawString("Page: " + (pageIndex + 1 + " of " + totalNumPages),  (int) pageWidth / 2 - 35, (int) (pageHeight + fontHeight - fontDesent));
        g2.translate(0f, headerHeightOnPage);
        g2.translate(0f, -pageIndex * pageHeightForTable);
        //If this piece of the table is smaller
        //than the size available,
        //clip to the appropriate bounds.
        if (pageIndex + 1 == totalNumPages) {
          int lastRowPrinted =
              numRowsOnAPage * pageIndex;
          int numRowsLeft =
              table.getRowCount()
              - lastRowPrinted;
          g2.setClip(0,
                     (int) (pageHeightForTable * pageIndex),
                     (int) Math.ceil(tableWidthOnPage),
                     (int) Math.ceil(oneRowHeight *
                                     numRowsLeft));
        //else clip to the entire area available.
        else {
          g2.setClip(0,
                     (int) (pageHeightForTable * pageIndex),
                     (int) Math.ceil(tableWidthOnPage),
                     (int) Math.ceil(pageHeightForTable));
        g2.scale(scale, scale);
        printing = true;
        try {
        table.paint(g2);
        finally {
          printing = false;
        //tableView.paint(g2);
        g2.scale(1 / scale, 1 / scale);
        g2.translate(0f, pageIndex * pageHeightForTable);
        g2.translate(0f, -headerHeightOnPage);
        g2.setClip(0, 0,
                   (int) Math.ceil(tableWidthOnPage),
                   (int) Math.ceil(headerHeightOnPage));
        g2.scale(scale, scale);
        //table.getTableHeader().paint(g2);
        //paint header at top
        return Printable.PAGE_EXISTS;
    class TableRenderDollar extends DefaultTableCellRenderer{
        public Component getTableCellRendererComponent(
          JTable table,
          Object value,
          boolean isSelected,
          boolean isFocused,
          int row, int column) {
            setHorizontalAlignment(SwingConstants.RIGHT);
          Component component = super.getTableCellRendererComponent(
            table,
            value,
            isSelected,
            isFocused,
            row,
            column);
            if( value == null || value .equals("")){
              ( (JLabel) component).setText("");
            }else{
              double number = 0.0;
              number = new Double(value.toString()).doubleValue();
              DecimalFormat df = new DecimalFormat(",##0.00");
              ( (JLabel) component).setText(df.format(number));
          return component;
    }

  • Need some help with a Macally enclosure and a spare internal drive

    Need some help with a Macally enclousure
    Posted: Oct 1, 2010 10:55 AM
    Reply Email
    Aloha:
    I have a Macally PHR-S100SUA enclousure that does not recognise,my WD 1001fals hard drive. It has worked just fine with other internal drives, but not this one?
    This is a spare internal drive that I am trying to make an external drive to store back ups for a lot of data. But so far I can not get it recognized by the computer. Maybe I need different drivers?
    Any suggestions?
    Dan Page

    Hi-
    Drivers aren't typically needed for external enclosures.
    Macally has none listed for that enclosure.
    The same is true for the WD drive, internal or external; no drivers.
    With the exception of high end PM multi drive enclosures, I can't think of any that use drivers.
    How is the external connected?
    Have you tried different cables, different ports?
    Bad/damaged cables are fairly common.
    Have you verified connections inside of the enclosure?

  • Need some help with putting a folder in users directory

    I'm not sure how to do this, but what I want to do is put this file in C:/My Documents, but I need to be able to verify that C://My Documents exists, if not put it in C:/Program Files.
    Can any one help me out?
    try {
                        String[] contactArray = parseDatFile(fc.getSelectedFile());
                        Document document = createXMLDocument(contactArray);
                        saveToXMLFile(
                        document,
                        new File(
                        "C:/Program Files/xxx/",// looks for directory for list
                        "xxxxxxxxxxxxxxxxxxxxxxxxxxxx"));
                    } catch (Exception exc) {
                        File f = new File("C:/Program Files/xxx/");// setting directory for list if not there
                        boolean yes = true;
                        yes = f.mkdir();// creating directory
                        try {
                            String[] contactArray = parseDatFile(fc.getSelectedFile());
                            Document document = createXMLDocument(contactArray);
                            saveToXMLFile(
                            document,
                            new File(
                            "C:/Program Files/xxx/",// used only if the directory didn't exist
                            "xxxxxxxxxxxxxxxxxxxxxxx"));

    Need some help with putting a folder in users directoryI recomend using System.getProperty( "user.home" ) not a hard-coded value.
    This will use the users home folder ( C:\My Documents ) on Win9X (I guess), C:\Documents and Settings\<current user> on Win2K +, and ~ on Unix-a-likes.

  • Need some help with downloading PDF's from the net.

    need some help with downloading PDF's from the net.  Each time I try to click on a link from a website, if it takes me to a new screen to view a pdf, it just comes up as a blank black screen?  any suggestions?

    Back up all data.
    Triple-click the line of text below to select it, the copy the selected text to the Clipboard (command-C):
    /Library/Internet Plug-ins
    In the Finder, select
    Go ▹ Go to Folder
    from the menu bar, or press the key combination shift-command-G. Paste into the text box that opens (command-V), then press return.
    From the folder that opens, remove any items that have the letters “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari, and test.
    The "Silverlight" web plugin distributed by Microsoft can also interfere with PDF display in Safari, so you may need to remove it as well, if it's present.
    If you still have the issue, repeat with this line:
    ~/Library/Internet Plug-ins
    If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari again.

  • Need some help with the Select query.

    Need some help with the Select query.
    I had created a Z table with the following fields :
    ZADS :
    MANDT
    VKORG
    ABGRU.
    I had written a select query as below :
    select single vkorg abgru from ZADS into it_rej.
    IT_REJ is a Work area:
    DATA : BEGIN OF IT_REJ,
            VKORG TYPE VBAK-VKORG,
            ABGRU TYPE VBAP-ABGRU,
           END OF IT_REJ.
    This is causing performance issue. They are asking me to include the where condition for this select query.
    What should be my select query here?
    Please suggest....
    Any suggestion will be apprecaiated!
    Regards,
    Developer

    Hello Everybody!
    Thank you for all your response!
    I had changes this work area into Internal table and changed the select query. PLease let me know if this causes any performance issues?
    I had created a Z table with the following fields :
    ZADS :
    MANDT
    VKORG
    ABGRU.
    I had written a select query as below :
    I had removed the select single and insted of using the Structure it_rej, I had changed it into Internal table 
    select vkorg abgru from ZADS into it_rej.
    Earlier :
    IT_REJ is a Work area:
    DATA : BEGIN OF IT_REJ,
    VKORG TYPE VBAK-VKORG,
    ABGRU TYPE VBAP-ABGRU,
    END OF IT_REJ.
    Now :
    DATA : BEGIN OF IT_REJ occurs 0,
    VKORG TYPE VBAK-VKORG,
    ABGRU TYPE VBAP-ABGRU,
    END OF IT_REJ.
    I guess this will fix the issue correct?
    PLease suggest!
    Regards,
    Developer.

  • Need some help with ".png" image.

    Good day everyone. Here's the run down. I need to add an
    image (image "A") ontop of another image (image"B"). Image "B" is a
    paterned background. And Image "A" a logo with a transparent
    background.
    As it stands I have image "A" as a "png" and as you know....
    they are fri**ing huge! Haveing it as a "gif" only presents me with
    the IE6 problem of it adding a colored background to the image.
    So I'm stuck! Can any one tell me or point me in the
    difection of a tutorial to tell me the best way to add an image
    with a transparent background in Dreamweaver.
    Really need some help with this!
    Thanks all!

    >Right you can see the work in progress here>
    http://www.stclairecreative.com/DoughBoys_Site_Folder/home.html
    Before going much further I'd recommend reconsidering the use
    of a textured background. They are usually included for the benefit
    of the site owner only, and likely to annoy visitors. Studies on
    the subject suggest they often lead to usability problems. I do
    like to header graphic, but at 200K it's kinda heavy and can
    probably be optimized.

  • Need some help with guitar setup...

    jeez, never thought i'd be asking a question like this after playing for like 20 years, but i need some help with a guitar setup for mac. i'm gonna list out a lot of crap here that prolly doesn't affect anything at all, but here goes.
    Imac 17inch G4 - latest updated OS X... 10.4, or 5, or whatever. garageband 3.0
    digitech gnx-3
    alesis sr-16
    sure mic's
    yamaha e203 keyboard
    here's the setup:
    yamaha is on its own on a usb uno midi interface, sure's connected to gnx's xlr port, alesis connected to gnx's jam-a-long input, '87 kramer vanguard connected to gnx's guitar input. currently running headphones out on gnx to line in on mac.
    here's the problem:
    everything works beautifully, but my guitar sounds like crap. if i plug headphones into the gnx, it sounds beautiful. that makes me think its some kind of level issue between the gnx's output, and the mac's input, but nothing seems to fix it.
    by sounding like crap, i mean way too much bass. sound is muddy, blurry, not crisp... aka crap. i've tried altering both output and input on mac and gnx, and i cant get a combination that works. the gnx has a s/pdif out, can the mac accept that as input? might that help? short of running the gnx to my marshal half stack and mic'ing that, anyone have any suggestions, or use a similar setup?
    any help would be greatly appreciated!

    anyone? ... any suggestions? I think it might be an issue with the gnx pre-amping the signal as it goes out, and then the mac amping it on the way in, giving me a buttload more signal than i need, but since i cant find a happy level, i'm not really sure. i really dont want to resort to mic'ing my marshall... even with the volume almost off, my jcm900 is WAY too loud for apartment use. its not like i really NEED the guitar to sound perfect, i only use garageband to sketch out ideas for songs between myself and bandmates, but its really annoying to not have my customary crisp distortion. my bass player keeps telling me to use the built in amps, but, not to dis a practically free program, but the built in amps blow, at least after 10 years of marshall tube amplification they do. if anyone has any suggestions that might be helpfull on how i might resolve this, i would be your best friend for life and go to all your birthday parties

  • Need some help with computation

    Hi, I need some help with the following:
    My page 3 is a form thats shows, among other things, a document ID (:P3_DOC_ID). Next to this item I have created a button that calls a document selection form (page 10).
    On selection this forms sets 2 items:
    P10_SELECTED (Y or N)
    P10_DOC_ID (the selected documents ID value)
    When the user selects a document he returns to the calling form.
    On page 3 I now try to capture the selected values. For a test item I managed to do this by defining this items source as:
    [PL/SQL function body]
    begin
    if V('P10_SELECTED') = 'Y'
    then
    return V('P10_DOC_ID'); -- selected value
    else
    return V('P3_TEST'); -- else the original value
    end if;
    end;
    However I want P3_DOC_ID to capture the selected value. I tried using a computation but that did not work. Any ideas?
    thanks Rene

    You might want to check if the "Source Used" attribute for P3_DOC_ID is set to always or to "only when ..." it sounds like you need it set to "only when ..."
    If that does not work try this
    Place the following in a pl/sql anonymous block and turn off your
    computation.
    if :P10_SELECTED = 'Y'
    then
    :P3_DOC_ID := :P10_DOC_ID; -- selected value
    else
    :P3_DOC_ID := :P3_TEST; -- else the original value
    end if;
    Justin

  • Error 1603: Need some help with this one

    When installing iTunes I first get an error box saying
    "Error 1406: Could not write value to key \Software\classes\.cdda\OpenWithList\iTunes.exe. Verify that you have sufficient access to that key, or contact your support personnel."
    The second one (after I click on Ignore on the last box) I get it this one:
    "Error: -1603 Fatal error during installation.
    Consult Windows Installer Help (Msi.chm) or MSDN for more information"
    Strange thing is that I do have full access to my computer (or atleast in all other cases I have had since I am the only one with an account on it).
    I have done my best in trying to solve it myself but I'm running out of ideas. I have downloaded latest versions from the website and tried installing Quicktime separately. I have also tried removing Quicktime using add/or remove programs though I just I didn't dare to take full removal because it said something about system files.
    Anyway I really need some help with this, anyone got any ideas?
    Greets,
    Sixten
      Windows XP Pro  

    Do you know how to count backwards? Do you know how to construct a loop? Do you know what an autodecrementor is? Do you know how to use String length? Do you know Java arrays start with index 0 and run to length-1? Do you know you use length on arrays too? Do you know what System.out.println does?
    Show us what you have, there isn't anything here that isn't easily done the same as it would be on paper.

  • I Need Some Help With My Dreamweaver

    Hello, there i need some help with my dreamweaver i already made a forum about this but that one i maded didnt make sense soo i will make it more details in it soo i will tell you what i did i tell you what i downloed and all that just now but i tell you the things what it does i downloaded Adobe Design and Web Premium CS6 its a 30 day trial then and now i will tell you the details look below please
    Details
    Soo i opened my start menu then went on all programs then clicked on Adobe Design and Web Premium CS6 then i clicked on the dreamweaver CS6 then when i clicked on it i heard my computer shut down then it shuted down when i opened it straight away then it turns it self back on
    What did i do about this when it happened?
    I made a question so please can telll me what to do or what ever
    Why did i download it?
    i downloaded it because i am making a website and i want to use dreamweaver CS6 because i use notepad++ i do not like the notepad++ its harder and dreamweaver helps a bit i think because i watched a video of it
    What if you dont have an answer?
    Well, i will be very angry because i am making a good website its gonna be my frist publish website ever i made 20 websites but i never published them i deleted them because i wiped my computer
    What kind of Computer Do You have?
    System:
    Micfosoft windows xp
    Media Center Edition
    Version 2002
    Service Pack 2
    Computer
    ei-system
            intel(R)
    pentium(R) 4 CPU 3.20ghz
    3.20 ghz, 960 MB of RAM
    Btw i am using dreamweaver CS6 if you fogot and dont say add more details because there is alot off details there and if you help me i will show u the whloe code when i am done but leave ur emaill address below
    (C) Connor McIntosh

    No.
    Service Pack 3 just updates your OS. All of your files, folders and programs will still be there.
    You will start running into more problems like this the longer you stick with XP though. That particular OS is over 11 years old, service pack 3 hs been out for over 4 years.
    It may be time for a system upgrade. I personally went from XP to Windows 7 and I haven't looked back one bit.

  • Need some help with MDX formula

    Hello, I am not finding any good documentation on MDX formulas, there is a specific one that I need some help with....could someone please elaborate what exactly does this formula mean? thanks.
    (MEASURES.[SIGNEDDATA],
    CLOSINGPERIOD([%TIMEDIM%].
    [%TIMEBASELEVEL%]))

    If new MEASURE gets added to Measure's table , in BPC Client , etools->client Options-> Refresh Dimensions should get the new measure into the CurrentView .IF not try  etools->client Options-> Clear Local application information .
    Formula 2 : 
    (MEASURES.SIGNEDDATA,
    CLOSINGPERIOD(%TIMEDIM%.
    %TIMEBASELEVEL%))
    This formula is used to retrieve AST & LEQ account values.
    If current time member is at monthlevel ,ie  ClosingPeriod of  2011.FEB is  the current member it self ,and would retrieve 2011.FEB value.
    If Current time member is at quarter level then ClosingPeriod of 2011.Q1 is 2011.Mar  ,and would retrieve 2011.MAR value.
    If Current time member is at year level then ClosingPeriod of 2011.TOTAL is 2011.DEC  ,and would retrieve 2011.DEC value.
    Formula 1 :
    MEASURES.SIGNEDDATA
    Irrespective of the level of the Time , MEASURES.SIGNEDDATA would retrieve current Time member value.This formula is used to retrieve INC & EXP account values
    if current time member is at month level,2011.FEB , 2011.FEB value is retrieved.
    if current time member is at quarter level,2011.Q1 , 2011.Q1(JANFEBMAR)  value is retrieved.
    if current time  member is at year level,2011.TOTAL , 2011.TOTAL(JAN,FEB,....,DEC)  value is retrieved.
    Hope this helps.

  • Need some help with strange sounds in Logic Pro 8

    Hi!
    I need some help with a problem I have in Logic Pro 8.
    When I have arrange window open, suddley strange high tones starts to make noise in my headphones. I don't know where these sounds comes from or why, but I need some help to get them away. Should I just try to contact Apple?
    Martin

    Hi Martin
    Welcome to the forum. Give everyone here some more info about your set up otherwise it may be difficult to figure out what is wrong.
    Which mac?
    Which OS?
    any hardware devices?
    if you are listening through headphones using the built in audio from the mac, you may be hearing fan noise or a hard drive spin noise.
    Don

Maybe you are looking for

  • Fusion drive on 2011 mid Mac mini...

    Hi everyone, I understand how the new Fusion drive works. But only available on new macs. I've been watching videos on YouTube that show how to make an ssd and hdd into one volume. And they show after the upgrade that these upgrades work. Now, I've a

  • Grouping of Production orders

    In Assessment or distribution cycle, we have production orders as the receivers. Since the list of production orders can be huge for month, creating the group through menu Extras/ Create group is not practical. I also tried to make set for the prodcu

  • Oracle 9i Lite Release 5.0.2.0.0 on Linux

    Have anybody tried to install subject? It installs successfully on my Linux box (Mandrake 8), when all products have been checked for installation, but there is no executable file lsnrctl in $ORACLE_HOME/bin or even tnslsnr. I did not even find make

  • Rss Feed resolves to a new and wrong address now...

    Here's my website http://www.rhymeandmelody.com (I've put in a temporary RSS Button at the top but I'm still trying to fix my iweb rss feed which is located on the right side toward the bottom) My old rss feed once was this address: http://web.mac.co

  • No optical output with alsa after upgrade

    After doing a system upgrade, my digital audio has stopped working. I can still get sound from my headphones, and my reciever does notice when i turn the IEC958 switch on and off in GNOME volume controll. $ lsmod|grep '^snd' | column -t snd_usb_audio