Need some help with security sandbox stuff asap please

hey guys... so im trying to do a swfLoader call to a swf on a server from my actionscript on my local machine, when i do that i get the security sandbox violation error.... i tried adding a crossdomain.xml file to the server that has the following code in it
<cross-domain-policy>
     <site-control permitted-cross-domain-policies="master-only"/>
     <allow-access-from domain="*"/>
     <allow-http-request-headers-from domain="*" headers="SOAPAction"/>
</cross-domain-policy>
and in my actionscript on application initialize i do
initialize="init(); Security.loadPolicyFile('http://myServer.com/crossdomain.xml')"
i also do
Security.allowDomain("http://myServer.com");
any ideas???? oh and i also went to this website http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager04a.ht ml and set the always allow trust locations to "/"
any ideas on how i could possible fix this problem?? ive been trying to get around this problem for the last 2 days!!
please help!!!!

Hi,
Please use policy file logging to check the exact error. This should shed some light on the problem.The procedure is detailed here.
http://www.adobe.com/devnet/flashplayer/articles/fplayer9_security_05.html
Nishad

Similar Messages

I NEED SOME HELP WITH UPDATING MY IPOD TOUCH PLEASE

i need some help with my ipod the version is 3.1.3 and every time I'm trying to update it says it can not be restored then it says unknown error so i need some help updating my ipod to version 4.2

If you mean you're trying to update your ios go to settings/general/software update. then you should see the latest ios just tap it and it will automatically update your ipod. If you're trying to restore your ipod (as it's not quite clear in your query) try doing it through itunes instead of on the device itself

I need some help with AVI and IDX files please.

Hello there,
I've just been given a hard drive with a load of media on it that I need to work with in FCP.
There's a folder with many .AVI clips, and each clip has an accompanying directory file with the extension .IDX
The format of the AVI files is DV, 720x576, 48kHz.
For the life of me, I can't get FCP to accept the media. Log and Transfer won't accept them, and if i bring in the AVI files in on their own using File>Import>Files... I get a message saying:
Media Performance Warning
It is highly recommended that you either recapture the media or use the Media manager to create new copies of the files to improve their performance for multi-stream playback.
I can click 'OK' for this message and the media will appear in the browser, but If I place one of these AVI files on a new conformed sequence, the audio needs rendering. (Sequence settings correspond to media settings)
I tried just changing the wrapper from AVI to MOV, thinking I could fool FCP into accepting them, but I get the same rejection.
I thought the audio and video signals might be muxed, so I tried MPEG Streamclip to sort that out, but even MPEG Streamclip doesn't accept the media, saying : File open error: Can't find video or audio tracks.
Could anybody advise me on how to get the most out of these media files please?
Thanks in advance.
James.
Message was edited by: James M.
Message was edited by: James M.

yes. I tried transcoding in QT, but they still come in with the same audio rendering required. I'm a bit loath to convert them all though, as there are 1400 clips.
It's not a huge problem, as they do play in FCP, but I'd like to sort out the audio rendering. I don't understand why it needs rendering as the media and sequence audio settings match, and it's not some weird format or anything, it's bog standard 48kHz stereo.

Alright I give! I need some help with groups/busses and more please..

Hi all,
Well, its now been a few weeks of my off and on testing with my new Logic Rig, I have every plug I can transfer over to UB that I can and now am trying to get deeper into things.
First I struggled with learning the environment (I still dont get it fully) but now I am really confused about group and fx tracks.
- Am I missing something or is everything just a buss turned into a group? This also included creating an FX track?
If this is the case then its not nearly as complex as I think it is but I cant figure certain things out with the way logic handles naming in regards to its busses.
Lets say I want to create a sidechain group. I take an audio track change it to represent buss (1), I then rename buss 1 to SC-GROUP, now any window that I drop down to find the newly names SC-GROUP always remains named as buss (1). This even happens when I rename the buss direct from the audio environment.
I must be missing something, whats been confusing the heck out of me is that no matter how I try and name things they always remain their original names in any menues as the example of the buss (1), so how do I rename these channels so I can clearly know exactly where I am routing audio?
So lets summarise where I am lost so far hehe.
1. Are groups really just empty busses renamed to act as a group?
2. How can I rename a buss/group and be able to see the renamed channel in the menues.
and for the 3rd new question of sorts...
3. FX Sends, again is this just a buss that has an AU inserted into its channel and then rout the insert of an additional audio channel to the buss with the FX inserted?
and now my last uestion of the day if I have not confused you to death so far
Why is it that when I add a AU lets say battery as instrument 1, when I add another in the window and I rerout an instrum,ent track the next AU shows up at the bottom of the list instead of inst. 2?
If I am not explaining myself clearly enough for any of my examples let me know so I can try to better represent my questions. I am still so new to Logic and still have yet to get the bulk of the simple operations down just yet..
Thanks again for all your asistance!

Thank you guys,
So if I understand right, a sub buss is nothing more than a routing the output of a few channels to a buss to control a few aspects like I had mentioned compressing an entire group of tracks EG: a drum buss (in this situation a drum sub buss?).
So I will have to reffer to the manual again to read the details on an actual group since it does seem there is a difference EG: the group can actually manipulate the faders of channels routed to the group?
FX busses seem to be just that, slap an FX info either and AUX channel or a buss and then set the insert of that AUX or buss desired.
The reason I asked about naming is that lets say I have 6 effects tracks I wish to use lets say as an example AUX1=Short Delay, AUX2=Long Filter Delay, AUX3=Slap Verb, AUX4=Long Verb and so forth.
When I go to actually use these inserts I need to assume I know exactly what AUX I assigned each effect to, if I could simply rename this AUX track to refference the effect it would make so much more sense then trying to remember what AUX5 was.
In regards to my last question here is a bit more of a detailed explanation, please bare with me as I am not in front of my computer.
1. I add battery into Audio Instrument-1
2. I then configure my environemt to use my AUXs I already have inplace for audio routing.
3. I then edit the Audio window create the midi for a new multi-instrument.
4. I come back to the main arrange window and hold-click on the next available audio-instrument and in the instrument window battery will be instrument 1 out of how ever many blanks apear EG:25+
5. Now I go to add lets say Stylus RMX into the next available mutli audio instrument. I then repeat steps 2,3,4.
Now when I get to step 4 this time instead of audio instrument 2 from the lint being Stylus it shows up as the last possible instrument in the drop list that appears under audio instrument from hold-click on the audio-instrument track.
Its just odd, it should be instrument 2, but instead it shows up as the last possible choice.
Maybe I am doing something wrong, even sometimes when I grab on of batteries midi tracks and create next object I will get a random audio track in there out of no where, or maybe its just a bug with battery.
Any ideas? If I still am not describing this right, I will post a step by step this eve of exactly the steps I am taking.
Thanks again, this forum has been very helpful in getting me going with the questions I just cant seem to get around from my Nuendo work flow.
Cheers!

Need Some Help with Internet Explorer...Please

HI ...
I have one site that I use for work that I am not able to get on from home because I am Mac based.
It says I can only recognizes Internet Explorer.
Is there a way around this that doesn't involve me having to purchase Windows? It's the only site I need if I work from home, if I have to buy something, ok, but would rather see if there is another way.
Thank you for the help!!
DR

Internet Explorer is part of the Windows Operating System. In order to get Internet Explorer you must install Windows either using Bootcamp Assistant or using a Virtual Machine like Parallels, Fusion, or VirtualBox.

Need some help with Format!!! Please Help

I am all done with editing a wedding and just discovered that half of my project in the beginning is squished. I have black bars on the left and right sides. Basically FCP is not utilizing the extra sceen space on my files. The original footage is normal 3X4 and was captured as such (720X480 DV).
I do not understand why half of my project appears fine and fills the screen, but the first half has been squished and not filling the prject windows fully.
I am using a MacBook Pro, and FC 5.0. Footage was shot in Mini DV on a Sony.
Thanks a ton for any help or advice.
p.s. will attach a screen shot here in a few minutes.
Intel 2.0 Mac OS X (10.4.7) FCP 5.0

Thanks guys for the help. I don't think it was like this while I was editing. That is why I didn't notice it earlier. I let someone watch part of it and it could be that they hit something that changed it.
I found that the aspect ratio was on 12.5 and not O. When I put it to 0 it filled the screen much more, but not completely. But it should be enough to bring the image back to a normal size.
The question is now, is there a way to apply an aspect ratio change of 0 to 100 clips? When I select them all and change it, it only applies to the first clip. It is going to take a long long time to change all of them.

I need some help with my new podcast. Please!

I've just set up a new podcast and it's online on itunes. The xml file is hosted on my website. Can i edit the text within this file...i.e. if there is a spelling mistake...ping this...and itunes will update it? Cos i tried doing that but no changes were made...any ideas?
Also, to generate my xml file, i used this website
http://www.podcastblaster.com/podcast-feed/index.php
However i noticed that feedburner allows you to collate statistics on subscribers and podcast downloads....how can i switch to feedburner? i find this all so confusing. does anyone know what im talking about?

From looking at their site, Podblaster creates the feed file from the data you give it: so it's no good you editing the feed file yourself as Podblaster will over-write it the next time you add an episode. Any changes you make to data or episode in Podblaster will cause an amended version of the feed file to be uploaded and this will eventually be reflected in the itunes Store; it usually takes 1-2 days, occasionally longer, for new episodes to appear in the Store, and it's possible that minor amendments to the texts won't show until you upload a new episode.
To take advantage of Feedburner's statistics facilities you need to submit the feed to Feedburner, and then submit the feed it generates to the iTunes Store. This will involve you either using the procedure detailed here (which involves adding a special tag to the feed - something you may well not be able to do) or submitting this feed as a new podcast to the Store (which will necessitate making a small change to the name).
If you have any further queries please post both the URL of your feed and of the iTunes Store page (please include the http:// in both cases), without which it's possible only to give very general answers.

Please I need some help with a table

Hi All
I need some help with a table.
My table needs to hold prices that the user can update.
Also has a total of the column.
my question is if the user adds in a new price how can i pick up the value they have just entered and then add it to the total which will be the last row in the table?
I have a loop that gets all the values of the column, so I can get the total but it is when the user adds in a new value that I need some help with.
I have tried using but as I need to set the toal with something like total
    totalTable.setValueAt(total, totalTable.getRowCount()-1,1); I end up with an infinite loop.
Can any one please advise on some way I can get this to work ?
Thanks for reading
Craig

Hi there camickr
thanks for the help the other day
this is my full code....
package printing;
import java.awt.*;
import java.awt.event.*;
import java.awt.print.*;
import javax.swing.*;
import javax.swing.table.*;
import java.text.DecimalFormat;
public class tablePanel
    extends JDialog implements Printable {
BorderLayout borderLayout1 = new BorderLayout();
private boolean printing = false;
private Dialog1 dialog;
JPanel jPanel = new JPanel();
JTable table;
JScrollPane scrollPane1 = new JScrollPane();
DefaultTableModel model;
private String[] columnNames = {
private Object[][] data;
private String selectTotal;
private double total;
public tablePanel(Dialog1 dp) {
    dp = dialog;
    try {
      jbInit();
    catch (Exception exception) {
      exception.printStackTrace();
public tablePanel() {
    try {
      jbInit();
    catch (Exception exception) {
      exception.printStackTrace();
private void jbInit() throws Exception {
    jPanel.setLayout(borderLayout1);
    scrollPane1.setBounds(new Rectangle(260, 168, 0, 0));
    this.add(jPanel);
    jPanel.add(scrollPane1, java.awt.BorderLayout.CENTER);
    scrollPane1.getViewport().add(table);
    jPanel.setOpaque(true);
    newTable();
    addToModel();
    addRows();
    setTotal();
public static void main(String[] args) {
tablePanel tablePanel = new tablePanel();
tablePanel.pack();
tablePanel.setVisible(true);
public void setTotal() {
total = 0;
int i = table.getRowCount();
for (i = 0; i < table.getRowCount(); i++) {
    String name = (String) table.getValueAt(i, 1);
    if (!"".equals(name)) {
      if (i != table.getRowCount() - 1) {
        double dt = Double.parseDouble(name);
        total = total + dt;
String str = Double.toString(total);
table.setValueAt(str, table.getRowCount() - 1, 1);
super.repaint();
public void newTable() {
    model = new DefaultTableModel(data, columnNames) {
    table = new JTable() {
      public Component prepareRenderer(TableCellRenderer renderer,
                                       int row, int col) {
        Component c = super.prepareRenderer(renderer, row, col);
        if (printing) {
          c.setBackground(getBackground());
        else {
          if (row % 2 == 1 && !isCellSelected(row, col)) {
            c.setBackground(getBackground());
          else {
            c.setBackground(new Color(227, 239, 250));
          if (isCellSelected(row, col)) {
            c.setBackground(new Color(190, 220, 250));
        return c;
    table.addMouseListener(new MouseAdapter() {
      public void mouseClicked(MouseEvent e) {
        if (e.getClickCount() == 2) {
        if (e.getClickCount() == 1) {
          if (table.getSelectedColumn() == 1) {
   table.setTableHeader(null);
    table.setModel(model);
    scrollPane1.getViewport().add(table);
    table.getColumnModel().getColumn(1).setCellRenderer(new TableRenderDollar());
public void addToModel() {
    Object[] data = {
        "Price", "5800"};
    model.addRow(data);
public void addRows() {
    int rows = 20;
    for (int i = 0; i < rows; i++) {
      Object[] data = {
      model.addRow(data);
public void printOut() {
    PrinterJob pj = PrinterJob.getPrinterJob();
    pj.setPrintable(tablePanel.this);
    pj.printDialog();
    try {
      pj.print();
    catch (Exception PrintException) {}
public int print(Graphics g, PageFormat pageFormat, int pageIndex) throws PrinterException {
    Graphics2D g2 = (Graphics2D) g;
    g2.setColor(Color.black);
    int fontHeight = g2.getFontMetrics().getHeight();
    int fontDesent = g2.getFontMetrics().getDescent();
    //leave room for page number
    double pageHeight = pageFormat.getImageableHeight() - fontHeight;
    double pageWidth = pageFormat.getImageableWidth();
    double tableWidth = (double) table.getColumnModel().getTotalColumnWidth();
    double scale = 1;
    if (tableWidth >= pageWidth) {
      scale = pageWidth / tableWidth;
    double headerHeightOnPage = 16.0;
    //double headerHeightOnPage = table.getTableHeader().getHeight() * scale;
    //System.out.println("this is the hedder heigth   " + headerHeightOnPage);
    double tableWidthOnPage = tableWidth * scale;
    double oneRowHeight = (table.getRowHeight() + table.getRowMargin()) * scale;
    int numRowsOnAPage = (int) ( (pageHeight - headerHeightOnPage) / oneRowHeight);
    double pageHeightForTable = oneRowHeight *numRowsOnAPage;
    int totalNumPages = (int) Math.ceil( ( (double) table.getRowCount()) / numRowsOnAPage);
    if (pageIndex >= totalNumPages) {
      return NO_SUCH_PAGE;
    g2.translate(pageFormat.getImageableX(), pageFormat.getImageableY());
//bottom center
    g2.drawString("Page: " + (pageIndex + 1 + " of " + totalNumPages), (int) pageWidth / 2 - 35, (int) (pageHeight + fontHeight - fontDesent));
    g2.translate(0f, headerHeightOnPage);
    g2.translate(0f, -pageIndex * pageHeightForTable);
    //If this piece of the table is smaller
    //than the size available,
    //clip to the appropriate bounds.
    if (pageIndex + 1 == totalNumPages) {
      int lastRowPrinted =
          numRowsOnAPage * pageIndex;
      int numRowsLeft =
          table.getRowCount()
          - lastRowPrinted;
      g2.setClip(0,
                 (int) (pageHeightForTable * pageIndex),
                 (int) Math.ceil(tableWidthOnPage),
                 (int) Math.ceil(oneRowHeight *
                                 numRowsLeft));
    //else clip to the entire area available.
    else {
      g2.setClip(0,
                 (int) (pageHeightForTable * pageIndex),
                 (int) Math.ceil(tableWidthOnPage),
                 (int) Math.ceil(pageHeightForTable));
    g2.scale(scale, scale);
    printing = true;
    try {
    table.paint(g2);
    finally {
      printing = false;
    //tableView.paint(g2);
    g2.scale(1 / scale, 1 / scale);
    g2.translate(0f, pageIndex * pageHeightForTable);
    g2.translate(0f, -headerHeightOnPage);
    g2.setClip(0, 0,
               (int) Math.ceil(tableWidthOnPage),
               (int) Math.ceil(headerHeightOnPage));
    g2.scale(scale, scale);
    //table.getTableHeader().paint(g2);
    //paint header at top
    return Printable.PAGE_EXISTS;
class TableRenderDollar extends DefaultTableCellRenderer{
    public Component getTableCellRendererComponent(
      JTable table,
      Object value,
      boolean isSelected,
      boolean isFocused,
      int row, int column) {
        setHorizontalAlignment(SwingConstants.RIGHT);
      Component component = super.getTableCellRendererComponent(
        table,
        value,
        isSelected,
        isFocused,
        row,
        column);
        if( value == null || value .equals("")){
          ( (JLabel) component).setText("");
        }else{
          double number = 0.0;
          number = new Double(value.toString()).doubleValue();
          DecimalFormat df = new DecimalFormat(",##0.00");
          ( (JLabel) component).setText(df.format(number));
      return component;
}

Need some help with a Macally enclosure and a spare internal drive

Need some help with a Macally enclousure
Posted: Oct 1, 2010 10:55 AM
Reply Email
Aloha:
I have a Macally PHR-S100SUA enclousure that does not recognise,my WD 1001fals hard drive. It has worked just fine with other internal drives, but not this one?
This is a spare internal drive that I am trying to make an external drive to store back ups for a lot of data. But so far I can not get it recognized by the computer. Maybe I need different drivers?
Any suggestions?
Dan Page

Hi-
Drivers aren't typically needed for external enclosures.
Macally has none listed for that enclosure.
The same is true for the WD drive, internal or external; no drivers.
With the exception of high end PM multi drive enclosures, I can't think of any that use drivers.
How is the external connected?
Have you tried different cables, different ports?
Bad/damaged cables are fairly common.
Have you verified connections inside of the enclosure?

Need some help with putting a folder in users directory

I'm not sure how to do this, but what I want to do is put this file in C:/My Documents, but I need to be able to verify that C://My Documents exists, if not put it in C:/Program Files.
Can any one help me out?
try {
                    String[] contactArray = parseDatFile(fc.getSelectedFile());
                    Document document = createXMLDocument(contactArray);
                    saveToXMLFile(
                    document,
                    new File(
                    "C:/Program Files/xxx/",// looks for directory for list
                    "xxxxxxxxxxxxxxxxxxxxxxxxxxxx"));
                } catch (Exception exc) {
                    File f = new File("C:/Program Files/xxx/");// setting directory for list if not there
                    boolean yes = true;
                    yes = f.mkdir();// creating directory
                    try {
                        String[] contactArray = parseDatFile(fc.getSelectedFile());
                        Document document = createXMLDocument(contactArray);
                        saveToXMLFile(
                        document,
                        new File(
                        "C:/Program Files/xxx/",// used only if the directory didn't exist
                        "xxxxxxxxxxxxxxxxxxxxxxx"));

Need some help with putting a folder in users directoryI recomend using System.getProperty( "user.home" ) not a hard-coded value.
This will use the users home folder ( C:\My Documents ) on Win9X (I guess), C:\Documents and Settings\<current user> on Win2K +, and ~ on Unix-a-likes.

Need some help with downloading PDF's from the net.

need some help with downloading PDF's from the net. Each time I try to click on a link from a website, if it takes me to a new screen to view a pdf, it just comes up as a blank black screen? any suggestions?

Back up all data.
Triple-click the line of text below to select it, the copy the selected text to the Clipboard (command-C):
/Library/Internet Plug-ins
In the Finder, select
Go ▹ Go to Folder
from the menu bar, or press the key combination shift-command-G. Paste into the text box that opens (command-V), then press return.
From the folder that opens, remove any items that have the letters “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari, and test.
The "Silverlight" web plugin distributed by Microsoft can also interfere with PDF display in Safari, so you may need to remove it as well, if it's present.
If you still have the issue, repeat with this line:
~/Library/Internet Plug-ins
If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari again.

Need some help with the Select query.

Need some help with the Select query.
I had created a Z table with the following fields :
ZADS :
MANDT
VKORG
ABGRU.
I had written a select query as below :
select single vkorg abgru from ZADS into it_rej.
IT_REJ is a Work area:
DATA : BEGIN OF IT_REJ,
        VKORG TYPE VBAK-VKORG,
        ABGRU TYPE VBAP-ABGRU,
       END OF IT_REJ.
This is causing performance issue. They are asking me to include the where condition for this select query.
What should be my select query here?
Please suggest....
Any suggestion will be apprecaiated!
Regards,
Developer

Hello Everybody!
Thank you for all your response!
I had changes this work area into Internal table and changed the select query. PLease let me know if this causes any performance issues?
I had created a Z table with the following fields :
ZADS :
MANDT
VKORG
ABGRU.
I had written a select query as below :
I had removed the select single and insted of using the Structure it_rej, I had changed it into Internal table
select vkorg abgru from ZADS into it_rej.
Earlier :
IT_REJ is a Work area:
DATA : BEGIN OF IT_REJ,
VKORG TYPE VBAK-VKORG,
ABGRU TYPE VBAP-ABGRU,
END OF IT_REJ.
Now :
DATA : BEGIN OF IT_REJ occurs 0,
VKORG TYPE VBAK-VKORG,
ABGRU TYPE VBAP-ABGRU,
END OF IT_REJ.
I guess this will fix the issue correct?
PLease suggest!
Regards,
Developer.

Need some help with threads...

Hello all,
I am working on a project at work, and I am not the best programmer in the world. I have been trying to get my head around this for a couple of days and just cannot get it to work.
I am writing an instrumentation control program that will have three threads. One is the GUI, one will receive control information and set up the hardware, and one will check the hardware status and report it to the GUI periodically. I plan on using the invokeLater() method to communicate the status to the GUI and change the status display in the GUI. Communication from the GUI to the controller thread and from the status thread to the controller thread I had planned on being piped input/output stream as appropriate. I have a control class and a status class that need to be communicated over these piped streams. In some trial code I have been unable to wrap the piped input/output streams with object input/output streams. I really need some help with this. Here is the main thread code:
package playingwiththreads1;
import java.io.*;*
*public class PlayingWithThreads1 {*
public static void main(String[] args) {*
* PipedOutputStream outputPipe = new PipedOutputStream();*
* ObjectOutputStream oos = null;*
* ReceiverThread rt = new ReceiverThread(outputPipe);*
// Start the thread -- First try*
* Thread t = new Thread(rt);*
t.start();*
// Wrap the output pipe with an ObjectOutputStream*
try*
oos = new ObjectOutputStream(outputPipe);*
catch (IOException e)*
System.out.println(e);*
// Start the thread -- Second try*
//Thread t = new Thread(rt);*
//t.start();*
/** Send an object over the pipe. In reality this object will be a
class that contains control or status information */
try
if (!oos.equals(null))
oos.writeObject(new String ("Test"));
catch (IOException e)
try
Thread.sleep(5000);
catch (InterruptedException e)
I read somewhere that it matters where you start the thread relative to where you wrap piped streams with the object streams. So, I tried the two places I felt were obvious to start the thread. These are noted in the comments. Here is the code for the thread.
package playingwiththreads1;
import java.io.*;
public class ReceiverThread implements Runnable {
private PipedInputStream inputPipe = new PipedInputStream();
private ObjectInputStream inputObject;
ReceiverThread (PipedOutputStream outputPipe)
System.out.println("Thread initialization - start");
try
inputPipe.connect(outputPipe);
inputObject = new ObjectInputStream(inputPipe);
catch (IOException e)
System.out.println(e);
System.out.println("Thread initialization - complete");
public void run()
System.out.println("Thread started");
try
if (inputObject.available() > 0)
System.out.println(inputObject.read());
catch (IOException e)
System.out.println(e);
Through testing I have determined that no matter where I start the thread, the thread never gets past the "inputObject = new ObjectInputStream(inputPipe);" assignment.
Could someone please help me with this? There are other ways for me to write this program, but this is the one that I would like to make work.
Many thanks in advance,
Rob Hix
Edited by: RobertHix on Oct 6, 2009 3:54 AM

Thanks for the help, but that did not work. I tried flushing the ObjectOutputStream and it is still hanging when initializing the thread.
Here is a better look at the code since I was helped to figure out how to insert it:
The main method:
package playingwiththreads1;
import java.io.*;
public class PlayingWithThreads1 {
    public static void main(String[] args) {
        PipedOutputStream outputPipe = new PipedOutputStream();
        ObjectOutputStream oos = null;
        ReceiverThread rt = new ReceiverThread(outputPipe);
        // Start the thread -- First try
        //Thread t = new Thread(rt);
        //t.start();
        // Wrap the output pipe with an ObjectOutputStream
        try
            oos = new ObjectOutputStream(outputPipe);
            oos.flush();
        catch (IOException e)
            System.out.println(e);
        // Start the thread -- Second try
        Thread t = new Thread(rt);
        t.start();
        /* Send an object over the pipe. In reality this object will be a
         * class that contains control or status information */
        try
            if (!oos.equals(null))
                oos.writeObject(new String ("Test"));
                oos.flush();
        catch (IOException e)
            System.out.pringln(e);
        try
            Thread.sleep(5000);
        catch (InterruptedException e)
}The thread code:
package playingwiththreads1;
import java.io.*;
public class ReceiverThread implements Runnable {
    private PipedInputStream inputPipe = new PipedInputStream();
    private ObjectInputStream inputObject;
    ReceiverThread (PipedOutputStream outputPipe)
        System.out.println("Thread initialization - start");
        try
            inputPipe.connect(outputPipe);
            inputObject = new ObjectInputStream(inputPipe);
        catch (IOException e)
            System.out.println(e);
        System.out.println("Thread initialization - complete");
    public void run()
        System.out.println("Thread started");
        try
            if (inputObject.available() > 0)
                System.out.println(inputObject.read());
        catch (IOException e)
            System.out.println(e);
}Does anyone else have and ideas?

Need some help with ".png" image.

Good day everyone. Here's the run down. I need to add an
image (image "A") ontop of another image (image"B"). Image "B" is a
paterned background. And Image "A" a logo with a transparent
background.
As it stands I have image "A" as a "png" and as you know....
they are fri**ing huge! Haveing it as a "gif" only presents me with
the IE6 problem of it adding a colored background to the image.
So I'm stuck! Can any one tell me or point me in the
difection of a tutorial to tell me the best way to add an image
with a transparent background in Dreamweaver.
Really need some help with this!
Thanks all!

>Right you can see the work in progress here>
http://www.stclairecreative.com/DoughBoys_Site_Folder/home.html
Before going much further I'd recommend reconsidering the use
of a textured background. They are usually included for the benefit
of the site owner only, and likely to annoy visitors. Studies on
the subject suggest they often lead to usability problems. I do
like to header graphic, but at 200K it's kinda heavy and can
probably be optimized.

Need some help with guitar setup...

jeez, never thought i'd be asking a question like this after playing for like 20 years, but i need some help with a guitar setup for mac. i'm gonna list out a lot of crap here that prolly doesn't affect anything at all, but here goes.
Imac 17inch G4 - latest updated OS X... 10.4, or 5, or whatever. garageband 3.0
digitech gnx-3
alesis sr-16
sure mic's
yamaha e203 keyboard
here's the setup:
yamaha is on its own on a usb uno midi interface, sure's connected to gnx's xlr port, alesis connected to gnx's jam-a-long input, '87 kramer vanguard connected to gnx's guitar input. currently running headphones out on gnx to line in on mac.
here's the problem:
everything works beautifully, but my guitar sounds like crap. if i plug headphones into the gnx, it sounds beautiful. that makes me think its some kind of level issue between the gnx's output, and the mac's input, but nothing seems to fix it.
by sounding like crap, i mean way too much bass. sound is muddy, blurry, not crisp... aka crap. i've tried altering both output and input on mac and gnx, and i cant get a combination that works. the gnx has a s/pdif out, can the mac accept that as input? might that help? short of running the gnx to my marshal half stack and mic'ing that, anyone have any suggestions, or use a similar setup?
any help would be greatly appreciated!

anyone? ... any suggestions? I think it might be an issue with the gnx pre-amping the signal as it goes out, and then the mac amping it on the way in, giving me a buttload more signal than i need, but since i cant find a happy level, i'm not really sure. i really dont want to resort to mic'ing my marshall... even with the volume almost off, my jcm900 is WAY too loud for apartment use. its not like i really NEED the guitar to sound perfect, i only use garageband to sketch out ideas for songs between myself and bandmates, but its really annoying to not have my customary crisp distortion. my bass player keeps telling me to use the built in amps, but, not to dis a practically free program, but the built in amps blow, at least after 10 years of marshall tube amplification they do. if anyone has any suggestions that might be helpfull on how i might resolve this, i would be your best friend for life and go to all your birthday parties

Need some help with security sandbox stuff asap please

Similar Messages

Maybe you are looking for