Need some helps! - Nano won't switch on....

Just got my new iPod Nano (3rd gen) few days ago. Everything was fine until just now when I try to sync music from iTunes to my nano, it won't switch on! I've tried the "Five Rs" indicated in the troubleshooting pages in Apple website. It still won't switch on. I'm sure it has enough battery, as I was just using it few hours ago.
It would be really kind if anyone can provide a solution before I consult the Apple Store!
Thanks a lot!!
Suky

Welcome to Apple Discussions!
Have you tried the steps listed here:
http://docs.info.apple.com/article.html?artnum=60942
http://docs.info.apple.com/article.html?artnum=60958
Also, have you tried resetting your iPod while it is plugged in to a power source/computer?
http://docs.info.apple.com/article.html?artnum=61705
btabz

Similar Messages

Need some help, system won't boot now.

Yesterday, I was having trouble getting WinXP installed on my SATA drive...after I tried some stuff to no avail, I decided to call it a night. When I got up, I went to boot up the system and now all that happens is the 1 LED light flashes and the CD-ROM LED light flashes(and even these don't happen all the time). Nothing else happens, fans don't start etc. So I need some help on troubleshooting this prob. When I do start it up, the D-bracket LEDs flash 4 red also, just flash like the other LED lights. My first guess would be that the PSU is dead? My PSU is a Antec Truepower 380W. Any help is much appreciated.

Believe Bas; As he is 100% Correct, as even 18 Amps is not anywhere enough on the +12V Rail nowadays, I mean I think the New "Minimum" Should be No Less than 25 Amps on the +12V Rail, With these new Powerful Vidio Cards, that Require thier own "Molex" Power Supply Connected to them (As most of these Top Nvidia FX, and ATI Pro's) Need and they can demand up to 6 Amps themselves, I mean, these Cards Have 400 and 550MHZ GPU's on them with over 100 Million Transistors, Not to mention the Extra 256MB of High Speed Graphics memory, Add this with a New 64BIT CPU, and a Sound Card, and a Couple of S-ATA's in RAID, And the 1GIG of High Speed System RAM, and you Are At or Over 18 Amps Already , And we are not even talking CD and DVD's or the At least 4 Fans that you should have ...Yep I for one say the Day's of the 18 Amp Min. Rating for the +12V Rail are Gone Forever...Why do you think that all the Really Good PSu's have At Least 30 Amp Ratings on thier +12V Rails......And in the Case of Enermax, They even went as Far to Start Building thier PSU's With 2 (Dual) +12V Rails ...Thats right, Now they have a +12V-1, and a +12V-2 , Now the CPU gets it's OWN Dedicated +12V Rail, and the System Gets the +12V-2 Rail.......I just got the new Enermax for my 3RD Rig that I'm Building (Dual Opteron 248) Rig , with Bas's Help of Coarse.....But For $99.00 US It was the Best Money spent yet, so much, for a little Price, as the Antec Units are More expensive...And I hear that they are doing a little Cheating on thier Amp Ratings these Days ..Ask "Wonk" he will tell you... ..............Sean REILLY875

Need some help: my itunes won't sync with my iphone anymore. Both softwares are up to date and I've reinstalled itunes. After I reinstall, it syncs. But then when I reboot my computer, it no longer syncs anymore and I have to keep reinstalling itunes. Tho

Need some help: my itunes won't sync with my iphone anymore. Both softwares are up to date and I've reinstalled itunes. After I reinstall, it syncs. But then when I reboot my computer, it no longer syncs anymore and I have to keep reinstalling itunes. Thoughts???

thought that it was possible to have the same iTunes library on any machine that was authorised, a kind of cloud-iTunes I guess.
That would convenient, but sadly it is not the case. Sorry!
Either way your welcome and best of luck!
B-rock

Hi! I got movies on my external hard drive that are AVI kind and won't play on my macbook pro? need some help please!!

Hi! I got Movies on my external hard drive that are AVI kind and won't play on my macbook pro? When I start playing the movie a message pops up and says "a required codec is not available". I tried flip4mac, xvid, divx already and still not playing my video. need some help please!! thanks.

Although vlc mentioned above is a much more powerful and better player you could try installing Perian if you insist on using the quicktime player. It may supply the codec it needs.
Not sure why you wouldn't be able to play straight avi files though in quicktime.

My iphone 4 has switch of itself, and cant switch on its blankout , i need some help to solve this matter, My iphone 4 has switch of itself, and cant switch on its blankout , i need some help to solve this matter

i need some help! my i phone has switch off totally blank as if there is no baterry, i cant wsitch on anymore, i live in Africa whereby there is no any apple offises arroung, i want to find a solution thats why i am asking for the help

Plug in iPhone with Wall Charger for 10 minutes, it may turn on itself. If not, keep on Wall Charger and Reset, hold both Home and Power buttons until the iPhone begins to restart. This usually takes less than 20 seconds of holding both buttons.

HT1222 I need some help.... I Have the iPhone 4S and downloaded the new software (6.0) and everything seems great so far except when I try to open a link in safari from a different app (messages, Facebook, ext..) it glitches and won't load. Any advice?

I need some help.... I Have the iPhone 4S and downloaded the new software (6.0) and everything seems great so far except when I try to open a link in safari from a different app (ie..messages, Facebook, ect..) it glitches and won't load. The blue loading bar will just jump back and forth and the page will not load properly if at all....

It sounds like you may have multiple problems, but none of them are likely to be caused by malware.
First, the internet-related issues may be related to adware or a network compromise. I tend to lean more towards the latter, based on your description of the problem. See:
http://www.adwaremedic.com/kb/baddns.php
http://www.adwaremedic.com/kb/hackedrouter.php
If investigation shows that this is not a network-specific issue, then it's probably adware. See my Adware Removal Guide for help finding and removing it. Note that you mention AdBlock as if it should have prevented this, but it's important to understand that ad blockers do not protect you against adware in any way. Neither would any kind of anti-virus software, which often doesn't detect adware.
As for the other issues, it sounds like you've got some serious corruption. I would be inclined to say it sounds like a failing drive, except it sounds like you just got it replaced. How did you get all your files back after the new drive was installed?
(Fair disclosure: I may receive compensation from links to my sites, TheSafeMac.com and AdwareMedic.com, in the form of buttons allowing for donations. Donations are not required to use my site or software.)

I bought a new song, but it won't play on my Mac or iPod. Everything is up to date. I need some help.

I bought a new song on itunes, but for some reason it won't play on my itunes library or Ipod. It skips to another song. Need some help on this if you can spare your time.

Hello
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
http://support.apple.com/kb/ts1389
Best of luck,
Mario

Need some help here on the proper settings for quicktime exporting from imovie that won't degredate the footage from my handycam

need some help here on the proper setting for quicktime exporting that won't denegrate my footage from handycam canon fs200

What are the existing settings iMovie?
Al

Hi i need some help im having problems the ipod can not be turned , in fact it was working fine but suddenly switched off and did not return to light n because it reconnected and if I had drums

hi i need some help im having problems , the ipod can not be turned , in fact it was working fine but suddenly switched off and did not return to light n because it reconnected and if I had drums . what can i do to turned on .
its an ipod touch 64gb

That symptom is covered here:
iPod touch: Hardware troubleshooting

Need some help with wine + midi

Howdi guys!
I need some help. I'd like to run an application which is only available for Windows and OSX, so my choice is wine. This application needs to send midi signals to the hardware it is supposed to control.
In the product's forum there is a thread which shows how it can be done. But the newest releases of wine don't allow this, because it doesn't support jack anymore.
I think basically it doesn't matter which application it is I run in wine, the question is, is it possible to send midi signals in and out through wine? If so, how? Might be that it's quite trivial, in my defense I have to say that I never worked with midi before.
The soundcard I use is an Edirol UA-25 which is fully supported in Linux, midi works.
Thanks for any ideas!
edit: Forgot two things: I know I could try older versions of wine or running it in a virtual machine, but I want to avoid this.
Last edited by Army (2012-04-27 07:15:33)

For that app, you will probably be using the ALSA-midi interface. So, you shouldn't require Wine to have jack support. - In fact, that picture clearly shows that Wine is using ALSA-midi, but he is using jackd + a2jmidid (which exposes alsa-midi 2 jack-midi).
As long as that software doesn't require a special driver, you should be able to use it. As for the specifics, i would imagine that you would start jackd, start a2jmidid and then start your application. - you also have to make sure your midi device is connecting before launching your app in wine - otherwise the device won't show up in your wine app. You also will need to select your midi interface in your application. After this, you should be able to connect your wine app (through the a2jmidi bridge) to your hardware.
But if for whatever reason you can't get it too work ~ i do actually use a VM for updating firmware on 2 different audio devices (a soundcard and midi-controller) - and it works great. I am using VMware, but i would imagine virtualbox would work very similar..
cheerz

Complete Java n00b...need some help

I'm very new to Java and I need some help writing a basic program.
I need to write a program that lets the user add up an infinite amount of floating point numbers. The program should compute the sum of all the numbers entered thus far. So for example if the user enters 2 and 3, it should give a number of 5. If the user then enters 4, I should give me 9 etc.
I'm not really sure how to get started on writing that. I can add up two numbers but I don't know how to tell the program to keep adding additional numbers to that sum. Can someone please help me out? thanks

It's ok... it can be hard to understand even the simplest concepts with only text and no help.
There needs to be an int variable outside (before) the loop initialized to 0.
float num = 0;Next, you need to have an infinite loop that requests floats to add onto the number.
Scanner input = new Scanner(System.in);
while (true) {
    float toAdd = input.nextFloat();
    num += toAdd;
    System.out.println("Current sum " + num);
}Putting all this together and putting it into a main method will work, but we have a bit of an issue. The program won't stop! For that reason, we need to specify a number which can exit the program. I like to use 0 for this purpose.
Scanner input = new Scanner(System.in);
while (true) {
    float toAdd = input.nextFloat();
    if (toAdd == 0) {    //test if toAdd is 0 so the program can break;
        break;
    num += toAdd;
    System.out.println("Current sum " + num);
}So, this code will work:
import java.util.Scanner;
class AddNumbers {
    public static void main(String[] args) {
        float num = 0;
        Scanner input = new Scanner(System.in);
        while (true) {
            float toAdd = input.nextFloat();
            if (toAdd == 0) {    //test if toAdd is 0 so the program can break;
                break;
            num += toAdd;
            System.out.println("Current sum: " + num);
}Edited by: Arricherekk on May 18, 2008 3:19 PM

Not a genius i need some help

my husand received a ibook from a customer as a form of payment for some work he did. It works but need some help trying to figure out some things any help will be appreciated. We received it with a admin password so i rebooted it with my new mac os x 10.5.4 to set our own admin password. I can connect to internet with my cable modem no problem however it will not let me open yahoo! it says not a supported browser so i click safari 5 to download and it then tells me that bill of materials is missing any ideas? when i load my mac os x disk it will not load just spins in tray all cds work so dont know why it won't run. It occassionally tells me that classic doesnot have mac os 9 supported?Also any updates i need from this info would also help me out. thank you.
mac os x version 10.3.9 processor 300 mhz PowerPc G3/powerPc 750 (83.2) memory 192 MB L2 Cache 512 kb bus speed 67 Mhz boot rom version 3.2.4f1
ata-4 bus: Toshiba 5.59GB revision N2.10c OS9 drivers:Yes
Safari 1.3.2
I hope any of this helps. Not really wanting to invest alot of money to do modifications just want to be able to do simple tasks like:itunes check email etc

HI and welcome to Apple Discussions...
Try repairing permissions.Launch Disk Utility. (Applications/Utilities) Select MacintoshHD in the panel on the left, select the FirstAid tab. Click: Repair Disk Permissions. When it's finished from the Menu Bar, Quit Disk Utility and restart your Mac. If you see a long list of "messages" in the permissions window, it's ok. That can be ignored. As long as you see, "Permissions Repair Complete" when it's finished... you're done. Quit Disk Utility and restart your Mac.
And since you don't the original install disc, boot in Safe Mode to make sure the startup disk is ok.
Instructions for starting up in Safe Mode
What is Safe Mode
It occassionally tells me that classic doesnot have mac os 9 supported?
The original owner probably had the Classic environment installed (Mac OS 9).
For software updates, click the Apple Menu / Software Update...
Carolyn

Need some Help configuring sip

Hi all ! ,
Im kind off new to sip calling and cisco telephony , but here goes ,: i have a 2821 router with CME installed
IOS : C2800NM-IPVOICEK9-M
Sofware version : 15.1(4)M4 / CME 8.6
Attached to GE0/0 is a CISCO 3750 switch
GEO - consisfts of 3 VLANS , the native
172.22.1.X
172.22.100.X VOICE
172.22.101.X DATA
my tftpserver = 172.22.1.150
i need some help configuring a sip trunk , i have 10 testing phonenumbers from vodafone , but i do not know where to start to get this working
i have tried
http://www.cisco.com/en/US/products/sw/voicesw/ps4625/products_configuration_example09186a00808f9666.shtml
but im getting stuck with what to fill in where .. is there anyone form NL whom has the same setup ? or similar ? or can give me some guidance on how to make the test calls

ok.. here goes
Building configuration...
Current configuration : 9721 bytes
! Last configuration change at 15:26:14 CET Thu Jan 2 2014
! NVRAM config last updated at 15:26:14 CET Thu Jan 2 2014
! NVRAM config last updated at 15:26:14 CET Thu Jan 2 2014
version 15.1
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname Router
boot-start-marker
boot-end-marker
no aaa new-model
clock timezone CET 1 0
network-clock-participate wic 0
network-clock-participate wic 1
network-clock-select 1 E1 0/0/0
network-clock-select 2 E1 0/0/1
dot11 syslog
ip source-route
ip cef
ip dhcp pool VOICE
network 172.22.100.0 255.255.255.0
option 150 ip 172.22.1.150
default-router 172.22.100.1
ip dhcp pool DATA
network 172.22.101.0 255.255.255.0
default-router 172.22.101.1
no ip domain lookup
no ipv6 cef
multilink bundle-name authenticated
isdn switch-type primary-net5
voice service voip
ip address trusted list
ipv4 172.22.1.50
ipv4 172.22.1.51
ipv4 172.22.100.1
ipv4 172.22.101.1
ipv4 62.140.159.225
callmonitor
allow-connections h323 to h323
allow-connections h323 to sip
allow-connections sip to h323
allow-connections sip to sip
no supplementary-service sip moved-temporarily
no supplementary-service sip refer
sip
registrar server expires max 3600 min 3600
voice class codec 1
codec preference 1 g711ulaw
codec preference 2 g711alaw
codec preference 3 g729r8
codec preference 4 g729br8
voice register global
voice translation-rule 1
rule 1 /5123781291/ /601/
rule 2 /5123781290/ /600/
voice translation-rule 2
rule 1 /^112$/ /112/
voice translation-rule 3
rule 1 /^.*/ /0262610290/
voice translation-rule 4
rule 2 /600/ /5123788000/
rule 3 /601/ /5123788001/
rule 4 /^2(..)$/ /51237812\1/
voice translation-profile CUE_Voicemail/AutoAttendant
translate called 1
voice translation-profile PSTN_CallForwarding
translate redirect-target 4
translate redirect-called 4
voice translation-profile PSTN_Outgoing
translate calling 3
translate called 2
translate redirect-target 4
translate redirect-called 4
voice-card 0
crypto pki token default removal timeout 0
controller E1 0/0/0
framing NO-CRC4
pri-group timeslots 1-31
controller E1 0/0/1
framing NO-CRC4
pri-group timeslots 1-31
ip ftp username cisco
ip ftp password cisco123
ip tftp source-interface GigabitEthernet0/0.1
interface GigabitEthernet0/0
no ip address
duplex auto
speed auto
no keepalive
interface GigabitEthernet0/0.1
encapsulation dot1Q 1 native
ip address 172.22.1.51 255.255.255.0
interface GigabitEthernet0/0.20
encapsulation dot1Q 20
ip address 172.22.101.1 255.255.255.0
interface GigabitEthernet0/0.100
encapsulation dot1Q 100
ip address 172.22.100.1 255.255.255.0
interface GigabitEthernet0/1
no ip address
shutdown
duplex full
speed 100
interface Serial0/0/0:15
no ip address
encapsulation hdlc
isdn switch-type primary-net5
isdn incoming-voice voice
no cdp enable
interface Serial0/0/1:15
no ip address
encapsulation hdlc
isdn switch-type primary-net5
isdn incoming-voice voice
no cdp enable
interface BRI0/1/0
no ip address
isdn switch-type basic-net3
isdn point-to-point-setup
interface BRI0/1/1
no ip address
isdn switch-type basic-net3
isdn point-to-point-setup
ip forward-protocol nd
ip http server
ip http authentication local
no ip http secure-server
ip http max-connections 16
ip http path flash:gui
ip route 0.0.0.0 0.0.0.0 172.22.1.50
tftp-server flash:7941/apps41.8-4-1-23.sbn alias apps41.8-4-1-23.sbn
tftp-server flash:7941/cnu41.8-4-1-23.sbn alias cnu41.8-4-1-23.sbn
tftp-server flash:7941/dsp41.8-4-1-23.sbn alias dsp41.8-4-1-23.sbn
tftp-server flash:7941/jar41sccp.8-4-1-23.sbn alias jar41sccp.8-4-1-23.sbn
tftp-server flash:7941/cvm41sccp.8-4-1-23.sbn alias cvm41sccp.8-4-1-23.sbn
tftp-server flash:7941/SCCP41.8-4-2S.loads alias SCCP41.8-4-2S.loads
tftp-server flash:7941/term41.default.loads alias term41.default.loads
tftp-server debug
control-plane
voice-port 0/0/0:15
voice-port 0/1/0
voice-port 0/1/1
voice-port 0/0/1:15
voice-port 2/0/0
voice-port 2/0/1
voice-port 2/0/2
voice-port 2/0/3
voice-port 2/0/4
voice-port 2/0/5
voice-port 2/0/6
voice-port 2/0/7
voice-port 2/0/8
voice-port 2/0/9
voice-port 2/0/10
voice-port 2/0/11
voice-port 2/0/12
voice-port 2/0/13
voice-port 2/0/14
voice-port 2/0/15
voice-port 2/0/16
voice-port 2/0/17
voice-port 2/0/18
voice-port 2/0/19
voice-port 2/0/20
voice-port 2/0/21
voice-port 2/0/22
voice-port 2/0/23
mgcp profile default
dial-peer voice 1 voip
description **Incomming Call from SIP Trunk**
translation-profile incoming CUE_Voicemail/AutoAttendant
session protocol sipv2
session target ipv4:172.22.1.50
incoming called-number .%
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
no vad
dial-peer voice 2 voip
description **Outgoing Call to SIP Trunk**
translation-profile outgoing PSTN_Outgoing
destination-pattern 9........
session protocol sipv2
session target ipv4:172.22.1.50
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
no vad
dial-peer voice 3 voip
description **Outgoing Call to SIP Trunk **
translation-profile outgoing PSTN_Outgoing
destination-pattern 9[2-9]..[2-9]......
session protocol sipv2
session target ipv4:172.22.1.50
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
no vad
dial-peer voice 4 voip
description **Outgoing Call to SIP Trunk**
translation-profile outgoing PSTN_Outgoing
destination-pattern 9[0-1][2-9]..[2-9]......
session protocol sipv2
session target ipv4:172.22.1.50
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
no vad
dial-peer voice 5 voip
description **911 Outgoing Call to SIP trunk**
translation-profile outgoing PSTN_Outgoing
destination-pattern 911
session protocol sipv2
session target ipv4:172.22.1.50
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
no vad
dial-peer voice 6 voip
description **Emergency Outgoing Call to SIP Trunk**
translation-profile outgoing PSTN_Outgoing
destination-pattern 9911
session protocol sipv2
session target ipv4:172.22.1.50
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
no vad
dial-peer voice 7 voip
description **911/411 Outgoing Call to SIP Trunk**
translation-profile outgoing PSTN_Outgoing
destination-pattern 9[2-9]11
session protocol sipv2
session target ipv4:172.22.1.50
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
no vad
dial-peer voice 8 voip
description **International Outgoing Call to SIP Trunk**
translation-profile outgoing PSTN_Outgoing
destination-pattern 9011T
session protocol sipv2
session target ipv4:172.22.1.50
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
no vad
dial-peer voice 9 voip
description **Star Code to SIP Trunk**
destination-pattern *..
session protocol sipv2
session target ipv4:172.22.1.50
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
no vad
dial-peer voice 10 voip
description **CUE Voicemail**
translation-profile outgoing PSTN_CallForwarding
destination-pattern 600
b2bua
session protocol sipv2
session target ipv4:172.22.1.155
dtmf-relay sip-notify
codec g711ulaw
no vad
dial-peer voice 11 voip
description **CUE Auto Attendant**
translation-profile outgoing PSTN_CallForwarding
destination-pattern 601
b2bua
session protocol sipv2
session target ipv4:172.22.1.155
dtmf-relay sip-notify
codec g711ulaw
no vad
sip-ua
authentication username 0262610290 password 7 15020A1F173D24362C realm 62.140.1
59.225
authentication username 0262610290 password 7 021605481811003348
no remote-party-id
retry invite 2
retry register 10
timers connect 100
registrar ipv4:62.140.159.225 expires 3600
sip-server ipv4:62.140.159.224
host-registrar
telephony-service
max-ephones 58
max-dn 192
ip source-address 172.22.100.1 port 2000
calling-number initiator
system message testing
cnf-file location TFTP tftp://172.22.1.150/
load 7960-7940 P00307020200.loads
load 7941 SCCP41.8-4-2S.loads
load 7941GE SCCP41.8-4-2S
time-format 24
dialplan-pattern 1 26261029.. extension-length 3 extension-pattern 9..
voicemail 600
max-conferences 12 gain -6
call-forward pattern 9.T
moh music-on-hold.au
web admin system name admin password password
dn-webedit
time-webedit
transfer-system full-consult
secondary-dialtone 9
directory entry 1 101 name 101
create cnf-files version-stamp 7960 Jan 02 2014 08:40:49
ephone-dn 1
number 290 secondary 0262610290
name Phone 1
hold-alert 30 originator
ephone-dn 2
number 291 secondary 0262610291
name phone 2
hold-alert 30 originator
ephone-dn 3
number 292 secondary 0262610292
name Phone 3
hold-alert 30 originator
ephone-dn 4
number 293 secondary 0262610293
name Phone 4
hold-alert 30 originator
ephone-dn 5
number 294 secondary 0262610294
label Phone 5
hold-alert 30 originator
ephone 1
mac-address 0019.E88F.3BDD
button 1:1
ephone 2
mac-address 001E.4A92.0A27
type 7961
button 1:2
ephone 3
mac-address 0012.43F5.03AF
button 1:3
ephone 4
mac-address 000F.F7AC.502A
button 1:4
ephone 5
mac-address 0019.E851.090A
button 1:5
line con 0
line aux 0
line vty 0 4
login
transport input all
scheduler allocate 20000 1000
ntp master
end

HT204291 When am watching live news on air play it shows only for one minute 30 seconds I need some help?

When am watching live news on air play it only shows for one minute 30 seconds ,, I need some help?

First of all, Hunt--thanks for responding!
"First, where are you playing the MPEG-2, that you see that jitter?"
On both a MacBook Pro, an Acer laptop and my Mac Tower. I would love to think that it is a problem with the playback system, and that if I merely send the file off to the duplicator they won't have the same problem. Maybe that is the case...I don't know if I have a choice rather than sending it off to see. But it happens in the same spots, in the same way, on all three of the players so I'm a little reluctant to have faith.
"Another thing that can cause jitter in an MPEG-2 is the Bit-Rate - higher the Bit-Rate, the better the quality, but the larger the file. For a DVD, one is limited by the total Bit-Rate (both Audio & Video), but with longer prodcutions, some users choose too low a Bit-Rate. If this is the issue, one would need to go back to the original Project and do a new Export/Share."
Of course, but in the case there is no more 'original project.' It is gone like the wind, stolen along with his computer and backups.
I think I am stuck using one of two files as my master: a DVD he burned where I only see the stutter/vibration/jitter once, or the mpeg2 file where I see it three times. Hopefully, the duplication house can rip if off of one of them and not see the jitter. I know that in audio, my personal filed, you can do a lot to enhance already existing sound--EQ, compression, tape saturation emulation software, etc. I guess I'm hoping there is some kind of analog to the video world that address jitter after a source has been printed--if indeed the source has been printed to be jittery.
Thanks,
Doug

Can't boot Lenovo Yoga 10+ HD, need some help ASAP!

Hi guys,
I am a bit clueless here. I just purchased the Yoga 10+ HD tablet and all was fine. Today I realised that my power button is constantly blinking (every 3 seconds). I cant boot the tablet the usual way by pressing the button. Clicking on it for more than 10 seconds won't change anything eiter. What is this and how can I get my tablet back to work?
PS: If I connect my tablet to my PC I get more than 12+ harddrives which can't be accessed and differ between 550kb up to 12gb.
I seriously need some help. I think its somehow in sleep mode or so. I don't know how to fix this.
thx for any solution.
Solved!
Go to Solution.

Ok guys, got it. All fine. HAd to push button more than 30 secs. All fine now.

Remote App on iPad connects but drops after about 20 mins. Need to turn off wait about 1 minute then turn on wifi on iMac before it can reconnect. Need some help please.

Remote App on iPad connects but drops after about 20 mins. Need to turn off wait about 1 minute, then turn on wifi on iMac before it can reconnect. Need some help please.
Already gone through troubleshooting guide a zillion times. Thanks.

This worked for me... A little time consuming but once you get rolling it goes GREAT... Thanks....
I got my artwork and saved it to my Desktop
Opened up Microsoft Paint and clicked on "File" and "Open" and found it to get it on the screen to resize it
Clicked "resize" and a box for changing it opened up
Checked the box "Pixels" and "Unchecked maintain aspect ratio"
Set Horizontal for 640 and Vertical for 480
Clicked on "OK" and went back to "File" and did a "Save As" and chose JPEG Picture
It came up "File Already Existed" and clicked "OK" (really did not care about the original artwork I found because wrong size)
Went to iTunes and on the movie right clicked on "Get Info", clicked on "Details", then "Artwork"
Go to the little box on the top left that shows your old artwork and click on it to get the little blue border to appear around it and hit "Delete" to make it gone
Click on "Add Artwork" and find it where you put the one from above on your Desktop and hit "Open" and OK and your new artwork is now there and all good.
Sounds like a lot of steps to follow but after around 5 or so you will fly through it. This worked perfect on my iPhone 6 Plus and I have artwork on my Home Videos now.

Need some helps! - Nano won't switch on....

Similar Messages

Maybe you are looking for