Need some information regarding parallel release creation for VSA

Hi ,
Currently we are using the sequential release creation of vendor schedule agreement for both DELJIT/DELFOR (ME84) and output message creation is" Only message for document"(ME9E) in backguond.
But the nackground job takes longtime.
so we are planning to do parallel release creation which reduce the time configuring parallel server.
My question is that: if we go for parallel release creation in (ME84) do we need to go for output message (ME(E)as itemwise in each VSA" only message for SA release"

Similar Messages

I need some information regarding the Enable-SPSessionStateService commandlet

I am our TFS Admin and by default a pseudo SharePoint 2010 admin as well. We have a couple users who can design and build pages, portals, web parts, etc.. Anyway, one of those users tried to add a web part for SQL Reporting Services
and in doing so caused an error to occur any time someone attempts to access that page/portal (It is actually a dashboard for TFS).
After some digging around, the real error (behind the unexpected error with correlation ID) is "Microsoft.Reporting.WebForms.SessionDisabledException: Session state has been disabled for ASP.NET. The Report Viewer control requires that session
state be enabled in local mode."
As a potential solution to this error I found this:
http://geekswithblogs.net/naijacoder/archive/2010/06/14/140408.aspx
among others referencing the same commandlet.
To my actual questions.
1. This commandlet creates a state service database. Where? Locally or on the DB server SharePoint is using? In my case this is a separate machine.
2. I noticed on my server running SharePoint 2010 I have an ASP.Net State Service running and a state DB on my DB server. Do I need to create a new one? I restarted the service without errors, this did not correct my error.
3. This commandlet alters the web.config files for the farm. In what way? Is there an easy revert which will change them back should this not solve my problem or make my problem worse somehow?
I tried to find some deeper documentation on this but couldn't, so maybe a link to that is all I need.
Thanks Everyone, Stu

The database is created on the default SQL Server/Instance in use by SharePoint, unless you use the -DatabaseServer parameter to specify the server/instance.
Do you have a State Service Service Application in Manage Service Applications in Central Admin?
I believe it adds session state to enabled. Just disable or remove the State Service Service App to revert.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

I need some information regarding oracle wallet

Hi All,
Recently, I have faced a error related to wallet. Although it has been resolved, could you please share few more info like pros cons etc. about this?
Thanks & Regards,
Prosenjit Sarkar

Hi
What do you know about Oracle wallet?
By the way, I use Oracle audit vault too.
http://docs.oracle.com/cd/E11882_01/network.112/e10746/asowalet.htm#ASOAG160
Regards

I need some information redarding Web AS Preview edtion

Hi all,
     I have installed WEB AS preview Edition. I need some information regarding this. I have already worked with SAP Netweaver developer studio 2.1 (Trail version) and web AS 6.4. So now what are the extra features or advantages that i will get with the Preview Installation and NWDS 7.1 is what i have get with that preview.
Regards,
Kiran.

Hi Ivaylo Ivanov,
I try to login by use:
username : Administrator
password : <master password> (at least 1 number)
I try to login many times but it always fails.
(I am very sure about my password since i also try to reinstall many times - 10th. both J2EE 1.4 and Java EE 5)
Ivaylo Ivanov, do you sure that you test with this new edition. (Not the previous edition)
I see the other persons get the result like me:
   Telnet Administration
   SAP J2EE Engine v7.100
User name: Administrator
Password:
The user account is either expired, or not valid yet.
Login failed. Reason: The user account is either expired, or not valid yet.
Connection to host lost.
if my login is not correct, it will tell the other messags.
   Telnet Administration
   SAP J2EE Engine v7.100
User name: f
Password:
Cannot authenticate the user.
Login failed. Reason: Cannot authenticate the user.
Message was edited by: Chart Krobtragolchai

I have project I want to run and need some information

Hi
I have project I want to run and need some information about technical, consultancy, architecture design
and what I need for this project (hardware and software(
I planning to stream live streaming 24 channels,
The feed is analog from pal STB cable or satellite.
I want to stream in 2 different resolution and bit rates
1. full screen 750-850k
2. 240x360 400-600k
the format is flash h.264
The channels are series, sport, news, and movie.
What recommended card (i have osprey 450e)?
What kind of requirement of computer I need (CPU, MHZ, CORE, RAM).
can i use i7 cpu or xeon cpu?
how many channels i can run in 1 computer?
I need cheap solution for this project around 20-30k$ for hardware.
thnaks

I am working on a similar project.
Actually, i can encode 2 streams in h.264 with a resolution around 640X480 on a Intel Xeon E3120 (2 core) 3.16 GHZ configuration.
OS is a windows XP 32 bits. CPU usage is around 75%.
(note: FMLE instances are run with FMLEcmd not GUI mode)
Does someone know if i can gain performance with windows XP 64bits ?
My goal is to encode 4 streams on a single machine, does someone know if a dual CPU, let's say 2 X (4 core) Xeon, is enough ?
I don't know if FMLE support multiple processor with multiple core configuration.
I am maybe wrong, but after reading this forum, it seems many people have problems using FMLE under windows vista. Do we gain performance on Vista vs XP ?

I need some information about jre 1.5 and jre 1.6.

Hello guys,
I need some information about jre 1.5 and jre 1.6.
Suppose if i have jre 1.5 customized with "additional language support" installed in my my desktop, and later on i install jre 1.6. will this jre over write all the esisting settings which was present in jre 1.5?
In short will the version upgrades disable the features of the old Version even though the old version is present in the desktop?
Thanks in advance for your answers.

In <2j_j3.1889$[email protected]> =?iso-8859-1?B?VG9t4XMgU3XhcmV6?= writes:
> Hi all, I am developing an acquisition data system for biomedical
>signals and I need to transmit this data from my hardware to PC using the
>USB port. For this, I am writing a device driver for Windows 98
^^^^^^ ^^^^^^ ^^^^^^^ ^^
That's not a trivial step. I would write a small C/C++ program that
exercises your driver (for robustness) just to be sure it's working
right first without crashing your system.
>The problem is that I don't know to use this driver in LabView.
>For now, I think to use a "code interface node" with code writen in C or a
>"call library function" with a DLL.
That's correct. _After_ you got your C/C
++ test program (and USB
driver) above working, then you can convert this little test program
into a DLL or CIN, which can interface with LabView. A DLL might be
easier (slightly) to write, but the CIN will work faster with LabView
and can be designed to be reentrant. The Code Interface Reference
Manual should guide you. Remember, this is a task for an _experienced_
C programmer. You'll need to use handles to pointers into all your
dynamic arrays and such passed into LabView.
After you got your CIN or DLL written, you can use a special CIN
function node to "link" (or bind) your CIN object into LabView's VI
diagram.
SOME THOUGHTS:
There are many hardware devices already on the market today that come
with Windows 98 drivers and DLL (or even CIN) libraries that would work
immediately with LabView. Why don't you save yourself three months of
work and simply buy one of these?
/\ Mark M Mehl, alias Superticker (Supertickler to some)
<><> Internet: [email protected]
\/ Preferred
UUCP: uunet!iastate.edu!mehl
Disclaimer: You got to be kidding; who would want to claim anything I said?

I need some information about File Download & File Upload

Hi All,
Can any one help me on this, I need some information about File Download & File Upload.
I read tutorial abt file upload and download but some of methods in tutorial are deprecated so i need clear information abt File upload and Download, if possible Code examples.
Thanks
Ragards
Ravi Golla

Hi Ravi
Check out thses links for examples:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/00062266-3aa9-2910-d485-f1088c3a4d71
/docs/DOC-8661#22 [original link is broken]
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/202a850a-58e0-2910-eeb3-bfc3e081257f
Otherwise you can simply follow this code for file download
Use the code like this.
1) Create the button and bind the action for it.
2)then write this code in the action.
3) do not write any thing in the init method.
try {
final byte[] content = this.getByteArrayFromResourcePath("C:
xyz.properties");
final IWDCachedWebResource resource = WDWebResource.getWebResource(content, WDWebResourceType.UNKNOWN);
try {
final IWDWindow window = wdComponentAPI.getWindowManager().createExternalWindow(resource.getAbsoluteURL(), "WD_Filedownload", false);
window.open();
catch(Exception e)
wdComponentAPI.getMessageManager().reportException(new WDNonFatalException(e), false);
5) writr the method getByteArrayFromResourcePath
//@@begin others
private byte[] getByteArrayFromResourcePath(String resourcePath)
throws FileNotFoundException, IOException {
FileInputStream in = new FileInputStream(new File(resourcePath));
ByteArrayOutputStream out = new ByteArrayOutputStream();
int len;
byte[] part = new byte[10 * 1024];
while ((len = in.read(part)) != -1) {
out.write(part, 0, len);
in.close();
return out.toByteArray();
//end
Similarly for file upload
Similarly for upload in to server path also do the same
IWDAttributeInfo attInfo =
wdContext.getNodeInfo().getAttribute("upload");
binaryType =
(IWDModifiableBinaryType) attInfo.getModifiableSimpleType();
uploadedName = binaryType.getFileName();
File filename =new File("
<server name>
<folder name>
"+uploadedName ); );
try {
FileOutputStream out = new FileOutputStream(filename);
out.write(b);
out.close();
} catch (FileNotFoundException e) {
// TODO Auto-generated catch block
e.printStackTrace();
} catch (IOException e) {
// TODO Auto-generated catch block
e.printStackTrace();

Need some information on datasource 2LIS_02_SCL

Hi,
I need some information on field BWMNG of datasource 2LIS_02_SCL.
I want to know from which tables this field is getting data and how this field is getting populated.
Your help will be appreciated.
Regards,
Sanjay Chaurasia.

Hi Sanjay
Please find this : http://help.sap.com/saphelp_nw70/helpdata/en/e0/5ad638d80cd57be10000000a114084/frameset.htm
Cheers
Chanda

I need some information on quickviewer input range

Hi
I need some information on quickviewer input range
In quickviewer it is allowing me to input only 5000 or 6000 (BP)records, if i am trying to input more than that it is throwing ABAP- run time error. Is there any other way to input more than that in Quickviewe
kindly please suggest me
Regards
Vinay

Hy Vinay,
you get an error because the work with the Quickviewer is a dialog- Prozess.
If you want a 'work around', set the parameter of the timeout dialog prozess higher.
regards
Torsten

Hello please i need some information about the blackberr...

hello please i need some information about the blackberry instant messenger is how does it work , i heard that i send messages for free from a blackberry to a blackberry is it true ? does it need internet ? and does it matter if the other phone is in another country'
thank you alot

Hello,
Here is a page with much information about BBM:
http://na.blackberry.com/eng/devices/features/im/blackberry_messenger.jsp
Hope that helps! If not, Please come to:
http://supportforums.blackberry.com/rim/
and register an account. Then post to the applicable forum.
Thanks!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Need some intermediate and advance level website for SQL

Hi Gurus
I want to improve my SQL skills, is there any website through which I can improve that skills.
Need some intermediate and advance level website for SQL.
appreciate your suggestion. Thanks
Regards
Shu

if you have a lot of time you can follow some of the larger threads on AskTom. I think Mr. Kyte can do almost anything with SQL. And there are also some recurrent contributors as Stew Ashton provinding very interesting solutions.
Another option is to take a look at the answers in this forums: some participiants as Frank Kulash or Solomon Yakobson (to name just two of them) come up with astonishing pieces of SQL frequently.

I recently upgraded my IMac to Lion and have found that my mail account does not include a "mail trash" category similar to "mail sent", making it difficult to retrieve mails I might have sent to trash but find I need some information from. Suggestions?

I recently upgraded my IMac to Lion and have found that my mail account does not include a "mail trash" category similar to "mail sent", making it difficult to retrieve mails I might have sent to trash but find I need some information from. I've searched in settings and preferences and cant seem to find a way to add "Trash" to my Mail categories/folders.
Suggestions?

I recently upgraded my IMac to Lion and have found that my mail account does not include a "mail trash" category similar to "mail sent", making it difficult to retrieve mails I might have sent to trash but find I need some information from. I've searched in settings and preferences and cant seem to find a way to add "Trash" to my Mail categories/folders.
Suggestions?

Need some information for jar files upload in Oracle

Hi,
I am developing some java stored procedures which requires uploading about 10-15 jar files or may be more, to the oracle database. One way is to use loadjava and oracle stores classes in those jar files as separate java classes. Is there a way that I can put these jar files somewhere in the file systems, configure some oracle parameter, restart the database and still I am able to use them from my java stored procedures. This will be some kind of a dropin folder for jars. Any information on this will be helpfule.
Thanks

The forum on the JVM in Oracle at Java in the Oracle Database might be a better one to answer your question.
Melli

Need some help in creating Search Help for standard screen/field

I need some help in adding a search-help to a standard screen-field.
Transaction Code - PP01,
Plan Version - Current Plan (PLVAR = '01'),
Object Type - Position ( OTYPE = 'S'),
Click on Infotype Name - Object ( Infotype 1000) and Create.
I need to add search help to fields Object Abbr (P1000-SHORT) / Object Name (P1000-STEXT).
I want to create one custom table with fields, Position Abb, Position Name, Job. Position Abb should be Primary Key. And when object type is Position (S), I should be able to press F4 for Object Abb/Object Name fields and should return Position Abbr and Position Name.
I specify again, I have to add a new search help to standard screen/field and not to enhance it.
This is HR specific transaction. If someone has done similar thing with some other transation, please let me know.
There is no existing search help for these fields. If sm1 ever tried or has an idea how to add new search help to a standard screen/field.
It's urgent.
Thanks in advace. Suitable answers will be rewarded

Hi Pradeep,
Please have a look into the below site which might be useful
Enhancing a Standard Search Help
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/daeda0d7-0701-0010-8caa-
edc983384237
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ee93446011d189700000e8322d00/frameset.htm
A search help exit is a function module for making the input help process described by the search help more flexible than possible with the standard version.
This function module must have the same interface as function module F4IF_SHLP_EXIT_EXAMPLE. The search help exit may also have further optional parameters (in particular any EXPORTING parameters).
A search help exit is called at certain timepoints in the input help process.
Note: The source text and long documentation of the above-specified function module (including the long documentation about the parameters) contain information about using search help exits.
Function modules are provided in the function library for operations that are frequently executed in search help exits. The names of these function modules begin with the prefix F4UT_. These function modules can either be used directly as search help exits or used within other search help exits. You can find precise instructions for use in the long documentation for the corresponding function module.
During the input help process, a number of timepoints are defined that each define the beginning of an important operation of the input help process.
If the input help process is defined with a search help having a search help exit, this search help exit is called at each of these timepoints. If required, the search help exit can also influence the process and even determine that the process should be continued at a different timepoint.
timepoints
The following timepoints are defined:
1. SELONE
Call before selecting an elementary search help. The possible elementary search helps are already in SHLP_TAB. This timepoint can be used in a search help exit of a collective search help to restrict the selection possibilities for the elementary search helps.
Entries that are deleted from SHLP_TAB in this step are not offered in the elementary search help selection. If there is only one entry remaining in SHLP_TAB, the dialog box for selecting elementary search helps is skipped. You may not change the next timepoint.
The timepoint is not accessed again if another elementary search help is to be selected during the dialog.
2. PRESEL1
After selecting an elementary search help. Table INTERFACE has not yet been copied to table SELOPT at this timepoint in the definition of the search help (type SHLP_DESCR_T). This means that you can still influence the attachment of the search help to the screen here. (Table INTERFACE contains the information about how the search help parameters are related to the screen fields).
3. PRESEL
Before sending the dialog box for restricting values. This timepoint is suitable for predefining the value restriction or for completely suppressing or copying the dialog.
4. SELECT
Before selecting the values. If you do not want the default selection, you should copy this timepoint with a search help exit. DISP should be set as the next timepoint.
5. DISP
Before displaying the hit list. This timepoint is suitable for restricting the values to be displayed, e.g. depending on authorizations.
6. RETURN (usually as return value for the next timepoint)
The RETURN timepoint should be returned as the next step if a single hit was selected in a search help exit.
It can make sense to change the F4 flow at this timepoint if control of the process sequence of the Transaction should depend on the selected value (typical example: setting SET/GET parameters). However, you should note that the process will then depend on whether a value was entered manually or with an input help.
7. RETTOP
You only go to this timepoint if the input help is controlled by a collective search help. It directly follows the timepoint RETURN. The search help exit of the collective search help, however, is called at timepoint RETTOP.
8. EXIT (only for return as next timepoint)
The EXIT timepoint should be returned as the next step if the user had the opportunity to terminate the dialog within the search help exit.
9. CREATE
The CREATE timepoint is only accessed if the user selects the function "Create new values". This function is only available if field CUSTTAB of the control string CALLCONTROL was given a value not equal to SPACE earlier on.
The name of the (customizing) table to be maintained is normally entered there. The next step returned after CREATE should be SELECT so that the newly entered value can be selected and then displayed.
10. APP1, APP2, APP3
If further pushbuttons are introduced in the hit list with function module F4UT_LIST_EXIT, these timepoints are introduced. They are accessed when the user presses the corresponding pushbutton.
Note: If the F4 help is controlled by a collective search help, the search help exit of the collective search help is called at timepoints SELONE and RETTOP. (RETTOP only if the user selects a value.) At all other timepoints the search help exit of the selected elementary search help is called.
If the F4 help is controlled by an elementary search help, timepoint RETTOP is not executed. The search help exit of the elementary search help is called at timepoint SELONE (at the
F4IF_SHLP_EXIT_EXAMPLE
This module has been created as an example for the interface and design of Search help exits in Search help.
All the interface parameters defined here are mandatory for a function module to be used as a search help exit, because the calling program does not know which parameters are actually used internally.
A search help exit is called repeatedly in connection with several
events during the F4 process. The relevant step of the process is passed on in the CALLCONTROL step. If the module is intended to perform only a few modifications before the step, CALLCONTROL-STEP should remain unchanged.
However, if the step is performed completely by the module, the following step must be returned in CALLCONTROL-STEP.
The module must react with an immediate EXIT to all steps that it does not know or does not want to handle.
Hope this info will help you.
***Reward points if found useful
Regards,
Naresh

I need some information

Can any one give so information about CSS module.i got some information that it is use full for Utility organizations, such as gas, hydro, cable etc..
But can any one elaborate it please....

Are you refering to CS module i.e Customer Service?
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CS/PMSMASC.pdf
Regards,
Rajesh Banka
Reward points if helpful.

Need some information regarding parallel release creation for VSA

Similar Messages

Maybe you are looking for