Need some quick help - fairly urgent!

I've just taken over a new job and have been the task of finishing the new brochure for Christmas, there's not a lot to do but a lot of the measurements need changing
This is the layout I'm dealing with..
All the boxes have been made in Illustrator
The text has been done in In'Design and it seems every piece of text is it's own box if that makes sense
My question is, if I select the whole specification box - copy, paste it into Adobe Illustrator and change the text there, then paste the edited box back into In-Design, will I lose quality when it gets printed?
I'm worried if I do it this way it may come out blurred? Or am I just worrying about nothing?

I couldn't find an Illy file in the end and have ended up creating tables in ID to replicate what was already there!
Didn't take very long and I guess if I didn't do it now, I'd come across the same situation next time!
Date: Wed, 30 Nov 2011 08:48:07 -0700
From: [email protected]
To: [email protected]
Subject: Need some quick help - fairly urgent!
    Re: Need some quick help - fairly urgent!
    created by Peter Spier in InDesign - View the full discussion
There certainly are viable "quick fix" solutions proposed here, and if the dealine is looming and this file never needs to be touched again I might be tempted, but they are only postponing the pain for a file that needs periodic updates, and I wouldn't waste effort on them, myself, when that time can be put toward a proper rebuild now if that's the ultimate goal.
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4054725#4054725
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4054725#4054725. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in InDesign by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Similar Messages

Need Some Quick Help w/Digital Frame for Xmas Gift Please...

Have a Kodak digital picture frame. I don't understand the architecture of using the SD or USB cards w/the frame. I bought a 1 and 2-gb SD card. When copying my photos to the cards (112 of them), I get about 92 on the 1-gb card and it says full, but still shows most of the disk available, but also says is full so only about 92 photos goes on there. So I try the 2-gb SD card, and exactly the same amount of photos fit??? Why - it is twice as big??? I tried reformatting it to Macintosh but that only made the frame not recognize it, and when I formatted it back to MS-DOS, the frame still does not recognize it...Question one...Why the 1 and 2 gb SD cards hold only the same amount of pictures and how can I get it formatted back to be read by the camera...and can I fill 112 pictures on??? So then I thought maybe a USB stick would work. Bought a 2-gb Lenar Firefly stick and whoa and behold the exact same thing happens...I get about 92 pictures. So I figured which 92 pictures I wanted and selected all the card contents, moved to trash and deleted the pictures, then went back and picked only the 92 pictures I wanted and copied to stick and all show that they are there, but when I go to play them on the frame the old pictures I had on there before are there and not just the 92 new ones. How do I get rid of everything on the disk and get the pictures onto it that I want...I am afraid to erase or format it in any way because the frame probably won't recognize it again. Also, there is one picture that says "Bad file" and I have no idea which picture this is...and can't get rid of it because when I move them all to trash and put the new pictures on the stick that one is still there????? On the stick, I have like 130 MB (112 Pictures). When copied it says 92 pictures with 1.76 GB available...why is this and why can't I copy pictures to that space??? Can someone explain this to me and advise me what I can do, how do I reformat it so recognized also??? Also, I have songs copied to the frame's internal memory, but can't figure out how to play the pictures and also music at the same time????? Thanks so much for any quick help and thorough explanation so I can get this wrapped and sent. Merry Christmas! Gary

I also have a Kodak picture frame and had the same problem with my SD card. Two things I learned.
1-Even though you can't see them on the card - there are hidden files. You can see them - use this procedure.
http://www.tech-recipes.com/rx/3104/os-x-show-hidden-files-and-folders-in-mac-os -x-finder/
2-The other item I learned is that you must drag and drop the files and then empty your trash. While the reader is connected to the machine.
Doing these two items will clear your card to full capacity.
As far as the "bad file" I am still working on that one. I have little movie clips on my card and believe that may be causing this view..so your music may be causing this message. Start with just the pictures only and see if you can load them onto the frame.

Need some quick help with redoing a website

Hi, I did my website done in iWeb in 2008, published it, and have it hosted by GoDaddy. I want to take it offline for now and design a new 'under construction' site, but there is a chance that I might want to still go back to the original version.
I see the current 'Domain' in Home Folder>Library>Application Support>iWeb.
Can I just redo my site (still working in pre-2008 iWeb), publish it, and if I need to, use the old 'Domain' to revert to my current website?
If yes, how do I do that....and, if 'no', what should I do?
Thanks!

Hi and thanks. To reply....
I published the website in iWeb and it is on my MobleMe. It was done in iWeb v 1.1.2, and I have not upgraded iLife on the computer that I designed the website on, as I feared losing some/all of it in an upgrade.
I do, however, pay GoDaddy for my corporate URL AND hosting....which I suspect is the forwarding and not 'hosting' per se....but on my Hosting account on GoDaddy it does say 'Shared Hosting'.
I do not want to 'overwrite' my current site just yet, as I am uncertain about the next one's content or the time to do it the way I envision it. What I want to do is SAVE my current site in case I want it back and, in the meantime, put up a page that says Under Construction. Can you help with that?
Much appreciated

New to the game and need some quick help

I have been thrown our exisiting phone infrastructure and what do you know we are having some issues.
We have a new series of DID's and when they are dialed from our directory they go anywhere? Not routing to the proper extension. Translation pattern looks good in comparison to the extensions that are working.
Cisco Unified CM Administration System version: 6.1.3.3000-1
Cisco Application Administration - 5.0(2)_Build064
Package: Unified CCX Enhanced
Regards,
Dan

First thing to know is that everything that has a DN can be used for routing, so it's a good idea to look at the route plan report to find matches.
If you can't find an exact match, chances are you're hitting something with wildcards ie X, [1-2], etc
An easy way to check routing if you're new to the game is to use DNA
Cisco Unified Communications Manager Dialed Number Analyzer Guide, Release 6.1(1)
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/dna/6_1_1/bw-dna.html
HTH
java
If this helps, please rate
www.cisco.com/go/pdihelpdesk

I'm new to java and I need some quick help with NetBeans.

Hi. To whomever can help here's the problem. I've been trying to install netbeans ide 5.0 on my computer for a while now and i can't seem to find out what is wrong. I'm in a java programming course and i need the J2SE Developement Kit 5.0 Update 7 and NetBeans IDE 5.0 Installer on my comp. Whenever i go to install it, it can't automatically create a directory and has erroe null in place of it. Whenever i made a new directory for it a page would come up telling me all of the errors during the installation which are null. Since i have administrator privelages and plenty of free space on my hardrive.

Hi,
I want to suggest you that
1.please check if any prerequisite is require before installing the NetBeans IDE,i hope there is nothing like that except proper jdk on your machine.
2.if you already having JDK on your machine check for the compatibility of that jdk version with the required NetBeans IDE version.
3.follow the steps provided to install the NetBeans IDE 5.0 for that refer the below link
http://www.netbeans.org/community/releases/50/install.html
hope you will get rid of the problem .....
---Vidya

Need som quick help

I'm looking to subscribe to Verizon Fiber Optics but their specs for internet service is as follows:
20 Mbps/5 Mbps FiOS Speed Package
System Requirements:
OS Supported: Yes
CPU Speed Minimum: 233 MHz
CPU Speed Recommended: 733 MHz
Front Side Bus: Not Supported
Minimun RAM Memory:128 MB
Recommended RAM Memory:256 MB
External Media: CD-ROM
Free Disk Space: 100 MB minimum
Free Disk Space: 200 MB maximum
Wired Ethernet I/F: 10/100 NIC
I come within most requirements except I don't know what they mean by Front Side Bus? I do have a Asante Talk 10T-Local Talk which I use to use with an old serial printer. My alternative is to buy a new computer, please advise.
Thanks

With very few exceptions, ISPs don't need* to install any software at all on your computer; the necessary interface they supply is the cable/FiOS modem, which must communicate with their equipment on the WAN side, using whatever protocol they want, and with your computer on the LAN side, using standard industry protocols that are supported by every modern operating system. The only specification in this list that is really important is "Wired Ethernet I/F: 10/100 NIC", which is the physical LAN-side connection from their modem to your network (computer or router, whatever you have); and that's very common -- it should plug right into your G3.
* Most ISPs that do ask you to install software on your computer are asking you to install "branding" or "enhanced experience" (read: branding) software. Some also offer pop-up-blocker/anti-virus software which isn't really necessary at this time for a Mac. When they list "system requirements" for processor speed, memory, disk, cache, etc., they're listing the requirements for this unnecessary software.
Powerbook G4 1GHz Mac OS X (10.3.9)

Need some quick help with server proxy on PI 7.1 system

Hi,
I am implementing a server proxy on the PI 7.1 system to do some logging to a table. So, when I go the the proxy in sproxy and generate it, in the interface section on the properties tabs I only see a drop down that says point to point enabled. There is no implementing class to click into and thus not method to populate with the custom code. Some direction would be appreciated, I have been working 7.0 for a while, so the missing implementing class is new to me! I know the method name has changed from the execute_asycronous etc... Am I going to the wrong place now to find the implementing method?
Thanks,
Chris

Whoops! Brain cramp. accidentally set the interface to outbound and not inbound in the ESR lol. Sorry.

Need some quick help with jbutton

Hi,
My first post so please be gentle!
I currently have two buttons in my container. The first one when pressed calls another function that generates a set of coordinates (button = generate). I now have another button that wants to take those coordinates and draw them on-screen, but I'm having trouble doing this since I can't get the "generate" button function to pass the xycoords over to the "draw" button function. I'm more of a Fortran/Perl programmer and I'm a bit confused how to go about this. I tried making the variable (xycoords) a gloabl variable, but id rather not do this.
Any tips?
Cheers,
Adriano

Sure, show us the code. Otherwise we have to try to read you mind.
Here is the scenario you are in:
Event Driven Method (ActionPerformed/ButtonClicked/etc): you do not have arguments that you can control, so if you want to use something from within that method you have to have visibility to it (global definition with respect to the routine) and in the Java world that usually boils down to class variables or some type of public data class.
Now, it you want the coordinates of the click event, that is contained in the MouseEvent... getX and getY, so you can use these as arguments to other methods from within your MouseListener.

Need some quick help

I have not used my Final Cut Pro 5 for about a year and have forgotten how to use it. I have two clips in the timeline and I want them to display side by side in the two windows above the timeline so they show the same frame location in the timeline. Synchronized so when I play through the timeline they both progress along with the play simultaneously. I know I did it before but am now getting frustrated trying to remember how to do it and the books are just confusing me. Thanks.
John

Put the two clips in the timeline, one on top of the other. Switch the Canvas to Image+Wireframe in the View popup. Drag the corner of the image on the top layer to scale it down. Move it to position as desired. Repeat for the clip on the layer below.

Need some quick help with a method

I am trying to navigate to the next row in a result set in a nextRecord() method. The way I have it now, it doesn't even try to go into the while loop I have.
static boolean nextRecord(){
         try{
           while(rs.next()){
               return true;
           error = "End of File";
            return false;
        catch (Exception e){
     System.out.println("Error: " + e.toString());
        return false;
}If anyone has an idea as to what the problem could be, please let me know

i know nothing of ResultSet,
but if its anything like the rest of the API, isnt there a hasNext() method which is a boolean.
and doesnt next() usually return an object.

I need some help adding music to my slideshow in iPhoto. When I open iTunes as the source, it says it needs to be open to populate, which it is. I have no knowledge of computers...like, at all....so I need some (simple) help? If possible? Thanks.

When I open iTunes as the source, it says it needs to be open to populate, which it is. I have no knowledge of computers...like, at all....so I need some (simple) help? If possible? Thanks.

When I open iTunes as the source, it says it needs to be open to populate, which it is. I have no knowledge of computers...like, at all....so I need some (simple) help? If possible? Thanks.

Need a quick help on Pro*C

Hi All,
I need a quick help on Pro*C. Here's the details on the same:
- My program takes one input file as parameter. Lets assume argv[2] is the name of the inputfile, which is my input parameter as well.
- ps_filename = argv[2]; I'm copying argv[2] i.e. filename in a variable called ps_filename
- Now this inputfile can be of two types, say type A_yyyymmddhhmmss.dat and B_yyyymmddhhmmss.dat.
- Therefore for every run I'll have one of this value as input parameter which will be copied into the ps_filename.
- Now I need to call two different functions based on the inputfile i.e. if ps_filename like 'A%' then call func A() else call func B();
But in ProC/C there is no provision to use like operator.
Therefore my question is how can I have ps_filename like 'A%' in C?
Can anyone please help me to solve this issue?
Hope to get your co-operation.
Thanks & Regards,
Debabrata

debabratas wrote:
Therefore my question is how can I have ps_filename like 'A%' in C?Hello, why don't you just substring on the first character, and if that's an 'A', then LIKE 'A%' will also hold.
For example, in Pro*C:
if (substr(ps_filename,1,1) == 'A') {
..

Replaced zd8000 motherboard and need some troubleshooting help please............

Hello All,
I just replaced the motherboard on our HP zd8000 (pentium 4, 3.0ghz, 2gb ram, Win XP) with a used but tested good MB and need some help with the following.
1) I now cannot play DVD movies as the error no "dvd decoder" present which was not an issue before? Where can I go to get a free decoder that will work, as Windows only shows paid versions? We have the dvd burner/reader with lightscribe. SOLVED! CNET HAD DECODER.
2) The internal temperature, according to SpeedFan, is running around 140 degrees with just some Internet browsing. Is that a normal temperature because I only have one of three fans running on the laptop? Is there anyway of making all three fans run to be sure there are no issues? I am positive I hooked up everything but again only one fan seems to be running?
3) I discovered some of the pins were damaged in the card reader. I may get the Seller to give me a discount, no intention of tearing it apart simply for that, but is there any concern of short or otherwise?
4) Our battery stopped charging years ago, these were notorious for such, but I purchased a new one last year and hoped the replacement MB would allow charging again. No such luck though. Is there anything I can do, BIOS update etc, to make the battery charge?
5) Anything you folks can think of for me to test to insure the new motherboard is working properly?
Thanks, Ralph
P.S. This was a correct replacement board according to MB serial numbers. Everything else seems to be functioning properly other than mentioned. Our graphics went out on the original MB.
This question was solved.
View Solution.

Some of the wires had pushed out of the harness that connected the other two fans. I double checked and re-attached those so now the laptop is running quite a bit cooler.
EVERYTHING IS GOOD TO GO!

Remember me.....well i need some real help now....:)

Hello guys,i hope that u remember me...if not i hope that u ll help me anyway....
well,i had an assignment for my university...i posted it and u told to start reading several books and try to write some code....
i came up with the following code:
import java.util.Random;
import java.util.*;
import java.text.DateFormat;
class Account {
     double initbal;
     double deposit;
     double withdraw;
//Account constructor
Account() {
     initbal=0;
     deposit=0;
     withdraw=0;
//method for calculating the balance
double balance() {
     return (initbal+deposit)-withdraw;
class BankAccount {
     double initbal;
     private double deposit;
     private double withdraw;
     public static void main(String args[]) {
     Account Dimitris=new Account();               //call the constructor
     CurrentAccount Over=new CurrentAccount();
try {     //exception added for fault parameters
     Dimitris.initbal=Double.parseDouble(args[0]);     //string parsing into a double
     Dimitris.deposit=Double.parseDouble(args[1]);     //string parsing into a double
     Dimitris.withdraw=Double.parseDouble(args[2]);     //string parsing into a double
     } catch (ArrayIndexOutOfBoundsException e) {
          System.out.println("You must enter three values!!");
     } catch (NumberFormatException e) {
          System.out.println("Only numbers are allowed!!");
     double AvlOvr;
     double bal;
     bal=Dimitris.balance();          //method called
     System.out.println("Initial balance is: "+Dimitris.initbal);
     System.out.println("Deposit Amount is: "+Dimitris.deposit);
     System.out.println("Withdraw amount is: "+Dimitris.withdraw);
     System.out.println("Overdraft limit is: "+Over.AvlOvr);
if (withdraw>(initbal+deposit)) {
     System.out.println("Insufficient Funds");
else
     System.out.println("Balance is: "+bal);
     System.out.println("Available Funds is: "+(bal+Over.AvlOvr));
     //display the date and time for the current locale
     Date date=new Date();
     DateFormat dateFormatter=DateFormat.getDateTimeInstance(DateFormat.SHORT,DateFormat.SHORT);
     System.out.println(dateFormatter.format(date));
class CurrentAccount extends BankAccount {
private float accId;
double AvlOvr;
CurrentAccount() {
double ovdr;
ovdr=100;
AvlOvr=ovdr;
interface Personal {
void Deposit ();
void Withdraw ();
the thing is that i need some help cause i cant find some sollutions....
i d like to give to the user a random id....
then at the CurrentAccount subclass i d like to add a Username to the user.Then Level 2 worries me as well.....I ll post u my assignment so u can have a look....If u could help me with Level 2 sollution and the thing that i told u before i d be grateful.......
by the way..i hope that u all guys have nice holidays!!!
Here is the assignment:
JAVA LAB ASSIGNMENT � B241
Bank Account
Level 1
Create a bank account that reads in the following information about a single customer
account:
Initial balance
Deposit amount
Withdraw amount
Current Date
Give the account holder a random account id number.
Display error messages if the number of parameters is incorrect or negative parameters are
entered.
Verify that the amount being withdrawn is available (i.e. make sure that the initial balance +
deposit amount is greater than or equal to the amount being withdrawn).
Calculate the balance amount in the account after the transaction has been completed.
Tasks:
- Create a BankAccount class, which defines a bank account
- Use command line arguments to read in the account information
- The customer account values are private and accessible only through the
BankAccount class
- Use the file, InsufficientFundsException.java given to you (Location:
/global_ro/rekha/B241/assignment) to create an Exception class called
InsufficientFundsException.class that throws an exception if an
InsufficientFundsException occurs in your BankAccount class. Make the necessary
changes to the file if you feel the need to do so.
- Print out the following information:
2
account holder�s id
balance amount
amount being withdrawn
the current date and time
(Hint: this will occur when the amount withdrawn is more than the total amount in the
account. Your withdraw method throws the InsufficientFundsException exception which
should be caught in your main program from where you are calling the withdraw method).
Subclass the BankAccount class for the specifics of a CurrentAccount class that adds an
additional field to the already existing information:
User name
The account balance and account id values should still be private and now accessible only
through the CurrentAccount subclass.
Allow the CurrentAccount class to provide overdraft protection of up to �100.
Task:
- Incorporate the additional functionalities into your initial program and print out the
values as before.
********************************END OF LEVEL 1 **************************
Level 2
Add the following functionalities to your Level 1 program.
Define an interface named Personal, consisting of two methods:
Deposit
Withdraw
Read in the account information specified in Level 1 for more than one user through the
command line parameters and display appropriate error messages as before.
Calculate the balance amount in each account after the transaction has been completed.
Tasks:
- Increment the account id each time a customer is added (For instance, if the first
customer id is 100, the next id should be 101 and so on).
- Implement the Personal interface in the BankAccount class.
- Print out the customer information for all customers as you did in Level 1.
*****************************END OF LEVEL 2*****************************
Level 3
Extend the above features to add some more personal information about the customer such
as:
a. Name: surname first name
b. Date of birth: day/month/year
c. Address: street
Town
Postcode
d. Phone: home number work number
e. E-mail: e-mail address
Customer�s data is stored in a file. It is retrieved from the file when the bank is opened and
stored in a memory buffer. The memory buffer is updated after every transaction. The
contents of the memory buffer are written into the file when the bank is closed.
Design a data management structure of the bank with several customers. The bank performs
�deposit� and �withdraw� transactions by using Java I/O streams.
Use the SimpleClient.java and SimpleServer.java files (Location:
/global_ro/rekha/B241/assignment) as a base for creating your own Client and Server
windows. Make the necessary changes to the files for them to work within your programs.
Tasks:
- Create a non-graphical user interface to be able to
o enter customer�s data
o display customer�s personal and account data after every transaction
- Write a JAVA program to read and write customers data from/to a file.
- Create a client � server networking environment using Java�s networking capabilities
such that data is entered through the server window and displayed by the client in the
client window.

Ela re si k eimaste k sinonomatoi...anyway...could you pleaze help me with my assignment...my other problem is that i've writen some more code for the 3rd part where it says add some more fields for the customers.I save them in a file and i restore them but i dont know how can i call them when the bank is opened....here's the rest of the code....
import java.io.*;
public class UserInfo {
public static void main(String[] args)
throws IOException {
     String k,l,m,n,o,p,q,r;
BufferedReader stdin = new BufferedReader(
new InputStreamReader(System.in));
System.out.print("First name:");
     k=stdin.readLine();
     System.out.print("Last name:");
     l=stdin.readLine();
     System.out.print("D.O.B:");
     m=stdin.readLine();
     System.out.print("Address:");
     n=stdin.readLine();
     System.out.print("Town:");
     o=stdin.readLine();
     System.out.print("Postcode:");
     p=stdin.readLine();
     System.out.print("Phone:");
     q=stdin.readLine();
     System.out.print("E-Mail:");
     r=stdin.readLine();
     try {
DataOutputStream out = new DataOutputStream(
new BufferedOutputStream(
new FileOutputStream("Data.txt")));
     out.writeUTF(k);
     out.writeUTF(l);
     out.writeUTF(m);
     out.writeUTF(n);
     out.writeUTF(o);
     out.writeUTF(p);
     out.writeUTF(q);
     out.writeUTF(r);
     out.close();
     DataInputStream in = new DataInputStream(
new BufferedInputStream(
new FileInputStream("Data.txt")));
     System.out.println(in.readUTF());
System.out.println(in.readUTF());
     System.out.println(in.readUTF());
     System.out.println(in.readUTF());
     System.out.println(in.readUTF());
     System.out.println(in.readUTF());
     System.out.println(in.readUTF());
     System.out.println(in.readUTF());
     } catch (NumberFormatException e) {
     System.out.println(e);
}

Switching to Lightroom - Need Some Quick Tips

Hi, I have been using Aperture for years and it looks like I will be using ACR or Lightroom because I'm having some issues that cannot seem to be resolved by Apple.
I intend to get into in the manual and start the process asap, but I need two quick bits of information so I can keep my workflow going for now.
1) I need to be able to sample a color and make adjustments to that color alone. Similar to Hue/ Saturation in Photoshop where a narrow band can be isolated and saturation, luminance and hue can be adjusted etc. In Aperture it is the Color brick and I don't know where to find it in ACR or
2) After using the brush tool, is there a way to blend or diffuse it?
Thanks

#1: the HSL panel allows per color hue, saturation and lightness adjustments
#2: no, not directly, but after applying an adjustment brush, you can erase the mask by holding down the option key (Mac) to subtract from the mask. Done carefully, this allows you to fine tune the adjusted areas...

Need some quick help - fairly urgent!

Similar Messages

Maybe you are looking for