Need some sort of help: Solaris 9 (intel)

After numerous attempts to install Video drivers etc. and by recomended instruction "press F2 for the test" I have got the freezing system. After reboot I have got:
System is ready.
Console Login:
Starting Desktop login on Display 0:...
Wait for desktop login screen before loggin in
and freeze again... nothing happens; I cannot type login, etc.
How I can resolve this problem at lease make this CDE disabled if I cannot login. :(
One most radical solution -- reinstall I know :)
Alex.
PS my video card is TSENG LABS ET4000/W32P

I built initpcic (XIGSpcic) packages that install on Solaris 10 x86, however it still doesn't plumb the underlying 3c589 card.
The packages are available at
ftp://ftp.sun.drydog.com/ftp/pub/solaris
ftp://ftp.sun.drydog.com/ftp/pub/solaris/initpcic-1.7-sol10.pkg
ftp://ftp.sun.drydog.com/ftp/pub/solaris/initpcic-1.7-sol10.src.tar.
Has anyone figured out how to configure it? The DCA (Device Configuration Assistant) is no longer available with Solaris 10 (Solaris 10 06/06 and 12/06).

Similar Messages

I uploaded that new IOS 8.0 and now I cannot open my mail, Safari, or the new "TIPS" app. Does Apple have some sort of help, other than going to a store that is over 40 miles away?

I uploaded that new IOS 8.0 and now I cannot open my mail, Safari, or the new "TIPS" app. Does Apple have some sort of help, other than going to a store that is over 40 miles away?

Purplehiddledog wrote:
I do backup with iCloud. I can't wait until the new iMac is available so that I can once again have my files in more than 1 location without needing to rely solely on the cloud.
I also rely on iTunes and my MacBook and Time Machine as well as backing up to iCloud. I know many users know have gone totally PC free, but I chose to use iCloud merely as my third backup.
I assume that the restore would result in my ability to open Pages and Numbers and fix the problem with deleting apps, but this would also mean that if my Numbers documents still exist solely within the app and are just not on iCloud for some reason that they would be gone forever. Is that right?
In a word, yes. In a little more detail.... When you restore from an iCloud backup, you must erase the device and start all over again. There is no other way to access the backup in iCloud without erasing the device. Consequently, you are starting all over again. Therefore, it would also be my assumption that Pages and Numbers will work again and that the deleting apps issues would be fixed as well.
If the documents are not in the backup, and you do not have a backup elsewhere, the documents could be gone forever.

Need some training material on solaris zones

I am an HP UX admin and I am upgrading my skills and learning Sun Solaris these days. I need some quick start on solaris zones, I believe they are same as vpar, npar on HPUX.
Can some one please provide me some guidance?

have a look at this one:
http://www2.emet.co.il/events/120105/solaris-zones.pdf
also there are 2 good demos here:
http://www.sun.com/bigadmin/content/zones/
Babak

Need Some Brain Storming Help WIth a Long Distance Mail Problem

I would really appreciate anyones input on this...
Here's the situation. I'm trying to solve a mail problem for my somewhat elderly Mother. The biggest problem is that she is 3800 miles away from me and nowhere near any sort of help or tech support (Rural Alaska) so I'm trying to sort this out over the phone.
Anyway, she somehow screwed up her mail. All of a sudden the mail she sends comes from MY account! It shows up in my mailbox as having been sent by me. She is using an iBook G4 that I gave her a year or so ago and I suppose it's possible that somehow my mail account was on there somewhere (?). It's like she accidentally switched users or something.
I have sent her Email to her normal .Mac email address and it does indeed show up in her mailbox when I check the web mail. She is running Tiger and I'm running Leopard.
I just can't for the life of me figure out what she would have done and I'm hoping that someone might have an idea. She says that the font sizes all changed as well which leads me to believe that she is indeed using my old settings and mail account.
Once again, any help really appreciated. I'm heading out of town for a week and she really depends on her email. I'm trying desperately to get this solved before I leave. Thanks!

It looks like Mail has reset its preferences, including the account settings. What follows is a more thorough explanation that should allow you to determine whether that’s really what happened and what your options would be in that case. I’ll provide the full instructions I usually provide to solve this problem when having direct access to the computer, even though you may find some of them not practical or unnecessary.
Under some circumstances (e.g. lack of available disk space, filesystem corruption, repeated crashes), Mail may discard the current ~/Library/Preferences/com.apple.mail.plist preferences file and create a new one. This file is where all the account settings are stored. As a result, all the non-.Mac account settings are lost. If you have a .Mac account, however, that account would appear to have been preserved because Mail would set it up automatically using the System Preferences > .Mac settings — but may result in a different .Mac account being automatically set up if for some reason the System Preferences > .Mac settings differ from what until then were the Mail account settings...
What’s the capacity and space available on the startup disk? Take a look at the comments about disk space in the following article, in case they apply to this case:
Problems from insufficient RAM and free hard disk space
Verify/repair the startup disk (not just permissions), as described here:
The Repair functions of Disk Utility: what’s it all about?
After having fixed all the filesystem issues, if any, and ensuring that there’s enough space available on the startup disk (a few GB, plus the space needed to make a backup copy of the Mail folder), quit Mail if it’s running, and make a backup copy of the ~/Library/Mail folder (e.g. by dragging it to the Desktop while holding the Option (Alt) key down), just in case something else goes wrong while trying to solve the problem. This folder is where all your mail is stored.
There are at least three ways to restore the account settings:
(1) Restore ~/Library/Preferences/com.apple.mail.plist from a backup if you have one. Mail shouldn’t be running while you do this.
(2) Set up your mail accounts again (you may want to quit Mail and trash the new com.apple.mail.plist first to start over). If given the option to import existing mailboxes or something like that, don’t. Just enter the account information and Mail will automagically rediscover the data in ~/Library/Mail/ when done. You’ll also have to re-configure some of the Mail > Preferences settings. For spam-related security reasons, the first thing you should do is go to Preferences > Viewing and disable Display remote images in HTML messages if it’s enabled.
(3) Mail may have renamed the old preferences file to com.apple.mail.plist.saved. If that’s the case, you may try trashing the new com.apple.mail.plist and renaming the old com.apple.mail.plist.saved back to com.apple.mail.plist. Again, be sure Mail isn’t running while doing this. Given the circumstances, there exists the possibility that com.apple.mail.plist.saved became corrupt, but that often is not the case and the settings can usually be restored by just renaming the file back to com.apple.mail.plist.
As a side effect of re-creating com.apple.mail.plist, Mail might rename Outbox (which is where messages waiting to be sent are stored) to Delivered. The name of that mailbox is actually a misnomer, as it would contain messages (if any) that couldn’t be delivered for some reason. You can delete that mailbox if you wish.
Note: For those not familiarized with the ~/ notation, it refers to the user’s home folder. That is, ~/Library is the Library folder within the user’s home folder, i.e. /Users/username/Library.

Need some basic Thread Help

Hello everyone,
I've recently been working on a game project with network capabilities.
I need to be able to send data to a client and vice-versa for both a client and a host.
Say whenever a player moves a character it should send the new coords, etc to the other person
I have all the networking through a Host and Client class done already, with methods like sendData(String[] data) and getData(). What I need is some sort of update thread in the main program to send this data without stopping the flow of the program.
I was thinking maybe a inner class inside the main program which extends a thread but I'm not sure how to implement that.
Please help if you can. Thanks.
P.S - Would maybe making the Host and Client classes extend Thread work too?
(Then I can do all the threading inside there instead)

dekenx wrote:
Hello everyone,
I've recently been working on a game project with network capabilities.
I need to be able to send data to a client and vice-versa for both a client and a host.
Say whenever a player moves a character it should send the new coords, etc to the other person
I have all the networking through a Host and Client class done already, with methods like sendData(String[] data) and getData(). What I need is some sort of update thread in the main program to send this data without stopping the flow of the program.Sounds like a producer/consumer pattern. You produce move data, put it on a queue, and go on with the game. Meanwhile, a consumer thread reads from the queue of move data and pushes it over the network to the other side.
I was thinking maybe a inner class inside the main program which extends a thread but I'm not sure how to implement that.
Please help if you can. Thanks.
P.S - Would maybe making the Host and Client classes extend Thread work too?
(Then I can do all the threading inside there instead)The inner class or deciding which class to have extend Thread are implementation details you shouldn't be thinking about until you have a good understanding of the overall approach.
Having said that, you should almost never extend Thread, since you're not creating a specialized kind of Thread class. You're just creating a task to be run in a separate thread, so implement Runnable. Or use an Executor from the java.util.concurrent package.
I would also probably not use an inner class for this.

I need some one to help me build a theme and a app for my restaurant

Ok so I have been working on a theme for my restaurant and I also want to do an app. For it I'm looking for someone that is willing to work on the with me I have no time but I got the theme pretty much done just need it to be able to get it to my phone and go from there
please hit me up if you want to make some cash and help me do this
From Kevin

Hi wildtoad and welcome to the BlackBerry Support Community Forums.
You can download the BlackBerry Theme Studio to create your theme and load it to your BlackBerry.
To download the Theme Studio visit http://na.blackberry.com/eng/services/themestudio/
Thank you and have a great day!
-HMthePirate
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

Right clicking - I need some sort of driver...

Hello!
Well, I recently acquired a new Logitech Wireless USB mouse, mainly for use with my Powerbook running Tiger. I currently have the USB reciever attached to my Keyboard, with I use for both the Powerbook and my 400mhz Sawtooth G4. Under OS 9, the G4 won't do a "right click" as I had assumed. I eventually realized that the reason I thought OS 9 had built-in 2 button mouse support was because I always used a 2-button Microsoft Mouse with my Macs running OS 9 - complete with the Microsoft driver. So, now I need some way to enable the right button to function as such....
Is there any way to map modifier keys (eg, control+click) to mouse buttons under OS 9, or do I need third-party software?
Thanks,
-Dan

Logitech seems to have Mac OS 9 drivers for their cordless mouse.
http://www.logitech.com/index.cfm/428/958&cl=us,en?osid=12
Is that the same model? I just picked one of them, so their may be others.
And no, Mac OS 9 does not have built-in support for the "right click."

I need some all around help...

I'm brand new at linux, and I have been using Windows xp for years, so I have no clue what I'm doing. I'm all installed, and it works fine, no errors, but I need some tips on doing some stuff.
I am trying to mod my .bashrc to add color, as in the wiki, but it doesnt open the actual file. Instead, nano keeps wanting to create a new file from scratch. I went ahead and filled in a new one, but it does nothing, what do I need to do? Is the .bashrc under a different name in the directory?
Next question... I am using a windows laptop to do all my internet, etc stuff, and the arch box is separated from the internet. I'm using wireless, and the arch box doesn't have a card, so I cant get it on the web right now. I want to install a GUI, most likely kde, but I have no clue as to how to put stuff on the arch box. All I have availible for data transfer is a 4gb usb jump-drive, and it has all of the kde packages on it, but I'm not sure how to access them to install them.
Aaaand...... the last question... If possible, is there a command that will list the directories of the arch box, so I can see where I'm at and where things are; I havent the foggiest idea of how this thing is layed out, or where the usb drive would be in the directories.

Peeples Mcnasty wrote:Whenever I go to fill in the user's passwor, the box doesn't register the key-presses. It will only register non-letters. I'm still tryig to get to the bottom of it, so, until then I'm resorting to root as my login.
Can you rephrase that? I don't really understand what you mean by register. Are you aware that password prompts in general won't echo anything? So normally, when you enter your password, nothing will change on the screen but the password you just entered is there.
Now, if I had to create a .bashrc, where would I need to go to find out what all must go into it?
Nothing has to go in there . You don't even have to have one, it all depends on what you want. You can put aliases in there (see man alias), define functions and environment variables, set your prompt and lots of other stuff. If you want examples you can take a look at threads like this one. Some of this stuff might be a bit overwhelming, so perhaps you should leave that alone until you have your install completed . What are you referring to when you say "Add color" ?
Regarding your usb drive, notice that it won't be mounted automatically until you configure some kind of automount (KDE wil do that for you). Mounting means making your usb drive accessible at some directory in the filesystem. So to access your drive you do the following:
Plug in drive
mount /dev/sdb1 /mnt
Your usb drive doesn't have to be sdb1, if you have multiple harddisks in your box, those usually come first, so your first harddisk is sda, the second sdb and so on. sda1 is the first partition on the first harddisk, in most cases your usb drive will come after the disks, so if you have one harddisk your usb drive is usually sdb.
Then you can install kde like this:
First change to the dir with the packages, if you put them in some subdirectory just hang that behind mnt/:
cd /mnt/
use ls to see if they are there. If that is the case copy them into your pkgcache.
* will choose everything in that directory, if there is something other than packages, you should choose the packages to copy by hand
cp * /var/cache/pacman/pkg
after that you can use pacman to install the kde group:
pacman -S kde
There might be some (or in case of kde probably many) dependencies which you didn't put on your usb drive. Pacman will tell you if there are. To get a list of urls to download those you can use
pacman -Sp kde
Good luck
I just refreshed Regarding pacman -U, pacman -U won't install dependencies automatically and will just stop if a dependency is missing, so if you use pacman -U to install packages with dependencies you will have to resolve those by hand and install them with --asdeps.

Help!!....I need some sort of a formula!!

My application displays graphs from given data and I need to somehow get it to show between 8 and 12 tick marks on the x and y axis. They also have to be rational values i.e. 120.0 130.0 140.0, etc not like 120.25432 or 132.5363 or 143.94. The program can put the tick marks at regular intervals already but not rational values. I seem to need a tick mark everytime the integer part changes by 1, 2, 2.5, 5, 10, 20, 25 or 50. This sequence would repeat for hundreds: 100, 200, 250, 500, 1000, 2000, 2500, 5000 and so on for hundreds of thousands. I don't need ticks at 40, 60, 3500, etc unless these numbers fall naturally into the above sequence. This requirement also repeats for the fractional part as well: a tick every 0.1, 0.2, 0.25 or 0.5 units.
I need to find a formula for "every XXX" depending on the level of the sequence.
I would need between 8 and 12 ticks on a "normal" screen 800 x 600 pixels. E.g. if the graph runs horizontally between 0 and 841ms then the 1000-scale would be too rare. Same for 500, 250 and 200 scales. The 100 scale would be ok as this would display 8 ticks, but the 50, 25, 20, 10 scales, etc, would be too dense. I need a formula to automatically make the decision that the 100 scale would be the one to use.
The program also knows how to adjust the "base number" of ticks on the axis so that the labels don't run into each other. Possibly assume that base number of regular ticks plus/minus 20% of that number. E.g. 8 to 12 ticks become 10 ticks +/- (20% of 10 == 2) == 10 +/- 2 ticks. If user reduces the window, the base number may become 5 or 4. In that case the scale will be 5 +/- 1 tick or 4 +/- 1 tick (20% of 4 == 0.8 approx 1).
Your help would be really, really appreciated as this needs to be sorted in the next week or two and I'm really stuck with this one!!
Thanks!!

To determine which scale to use first find the span of your axis Sx = Xmax-Xmin. You need to find which increment, when multiplied by the number of ticks N you wish to display, will cover this span.
The pattern of numbers that you specify (1,2,2.5...) is not a regular pattern and therefore cannot be elegantly implemented with a simple formula. You need to create a lookup array that contains these values, then create your series by scaling that array by powers of ten.
Start at an arbitrary scale, say, dx = 1 and find out if N * dx > Sx. If so, reduce dx to the next lowest increment in your series and repeat until N * dx > Sx is no longer true.
If N * dx < Sx you need to increase dx and repeat until you achieve N * dx > Sx. Your previous value of dx will be your "magic increment".
Hope this helps. Good luck!

Really need some !!HELP!! ALMOST 6 MONTHS WITH OUT BURNING A CD

I've posted before about my problem but but i still have not gotten an answer. This might be my last atempt to get any help before i end up taking my laptop to a repair shop so here we go.
I've recently ran a diagnostic with i tunes and here it is:
Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
TOSHIBA Satellite A75
iTunes 6.0.1.3
CD Driver 2.0.4.3
CD Driver DLL 2.0.3.2
LowerFilters: PxHelp20 (2.0.0.0), drvmcdb (1.0.0.1), ASAPIW2K (6.0.2.0), Pfc (2.5.0.204), MxlW2k (1.1.0.120), sscdbhk5 (1.0.0.1), Cdr4_xp (6.2.0.132),
UpperFilters: CDRDRV (6.0.0.0), Cdralw2k (6.2.0.132), GEARAspiWDM (2.0.4.3),
Video Driver: ATI MOBILITY RADEON 9000 IGP\ATI MOBILITY RADEON 9000 IGP
IDE\DiskFUJITSUMHU2100AT______________________00000008
Could not get bus type for CD, 50. Problem with installation of drive in Windows.
, Bus Address [0,0]
IDE\CdRomMATSHITADVD-RAM_UJ-820S________________1.50___, Bus Type ATA, Bus Address [0,0]
SCSI\CdRomVOBID__InstantDrive_CD_14_, Bus Type SCSI, Bus Address [0,0]
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
Current user is administrator.
D: MATSHITA DVD-RAM UJ-820S, Rev 1.50
Audio CD in drive.
Found 11 songs on CD, playing time 33:12 on Audio CD.
Track 1, start time 00:02:00
Track 2, start time 02:20:15
Track 3, start time 05:07:42
Track 4, start time 06:13:12
Track 5, start time 08:31:30
Track 6, start time 13:17:17
Track 7, start time 17:34:35
Track 8, start time 20:47:57
Track 9, start time 23:22:25
Track 10, start time 25:16:60
Track 11, start time 28:56:22
Audio CD reading succeeded.
Get drive speed succeeded.
The drive CDR speeds are: 4 8 12 16.
The drive CDRW speeds are: 4.
The drive DVDR speeds are: 4 8 12.
The drive DVDRW speeds are: 4 8 12.
E: Unsupported CD or DVD drive.
Virtual drives can sometimes interfere with reading and writing CDs in iTunes. If this is a virtual drive and you are having problems with other drives, try uninstalling the virtual CD application.
it apears to be something wrong with drive E but in the properties it says its working perfectly.
Every time i try to burn a cd i get the blue screen error.
i hade version 7 of i tunes kept getting the same thing, so i went back to 5.3 but still the same thing. It also happens when i try to burn a cd with nero, i have WMP but don't use it. so now i really hope to get an answer or i have no other choice but to take it to a repair shop. SO !!PLEASE HELP ME!!

no problems about the delay.
the 0x8E is reasonably generic. so let's try proceeding on two fronts.
1st front: we'll get a minidump to the Apple Engineers for a look
(the minidump can help identify the driver that seems to be causing the issue here.)
To set up your machine to capture a minidump, right click on "My Computer", select "Properties", select the "Advanced" tab, select the "Startup and Recovery" Settings button, select "small memory dump" from the popup. When it crashes, look for the MiniDump file. It's usually in the folder "C:\WINDOWS\Minidump" and is called something like Mini<number>-<number>.dmp.
Find that file and send it as an attachment to this email address.
in the email to Roy, be sure to include the following information:
- A link to the thread on Apple Discussions where the issue is being discussed
- The username you are using in the thread
- The version of iTunes you are using or trying to use
- the version of Windows you are using (mention service packs)
- A concise description of the issue you are seeing
- The exact text of the error message you are seeing
2nd front: checking on a few possibilities ourselves while waiting for feedback on the minidump
(a) device filter conflicts: blue screens with itunes while burning can be caused by device filter conflicts (i've seen 0x8Es before in cases of conflicts with old Roxio products). so perhaps try the techniques from the following document:
iTunes for Windows: Troubleshooting CD issues caused by device filters
(b) malware:
malware is a known cause of 0x8Es. try downloading fresh definitions and running vigorous virus and spyware scans. if your security software providers offer them, try running online scans too. (they can sometimes pick up an infection in cases where the security software on the PC has been compromised.)
if your security software providers don't offer online scans, try running the Symantec online virus check. (apologies in advance ... it takes an eternity to complete.)
Symantec Security Check

I need some legacy OS help. Resource and File Manager stuff...

I don't know where to find a better place to ask this and I know that it will strain your memory, but I really am in need of help.
I am working on a Windows port of the old and now defunct SpriteWorld animation library. I used to be involved in its development when I had a Mac several years ago, and I really enjoyed toying with it. I am aware of SpriteWorld X, but I don't like C++ and I want to do this for myself.
Anyway, the coding of the actual project will be trivial. What I need help with are the dozens of resource files that contain all of the graphics used by the examples. Since I'm doing this in Windows, I cannot simply open the resource files in ResEdit or even in code very easily. What I'm trying to do is extract the PICT and cicn resources in the files. I did find the legacy documentation on Apple's developer site and I have studied it thoroughly. However, the Resource Manager documentation leaves out a great many details and is making it nearly impossible to parse the files.
The biggest issue that I'm having is finding the exact starting point in the file for the resource fork. What I've noticed is that there seems to be an undocumented and nearly identical header, containing the file name, creator, file type and unknown data of unknown length, in all of the files that I've viewed. Since this header is not documented, it makes it very difficult to find the start of the fork. I'm guessing that it is used by the Finder?
I was able to manually find the start(I think...), since a copy resource fork header is 30 bytes prior to the first resource type listed in the file. Per the documentation, this is merely a copy and the actual header is further up in the file. I've found that, but many times the offsets are wrong. All of the offsets start at the beginning of the resource fork, which unfortunately, does not start at the first byte in the file. To make it even more difficult, most of the time the real header (and thus the fork) starts 82 bytes in, but not always and there doesn't seem to be any reason for the discrepancy. Even when I'm sure of the location of the start of the fork, the offsets in the header often times will point to random data in the file instead of the correct locations. I don't know if the files are corrupted or if there is more information that I'm missing.
Without being able to decipher the resource fork structure, there is no way that I can write the utility I need to extract the data. I know that I'm asking for help with VERY old data, but I'm not sure where else to turn. If I could afford it, I would just go out and buy a Mac. Unfortunately, that is not an option. I've searched just about as far as I can with Google, but to no avail. I wouldn't post this, but I've simply exhausted all other avenues. I sure hope someone can shed some light on this matter.
Message was edited by: Mark_Speir

If you get really stuck, you might find a helpful soul that might be willing to generate screen captures or otherwise de-rez the files for you. I've never gotten around to figuring out a way to dump the graphics directly from the resource forks, however, I do happen to have several legacy Macs still running on my home network, as well as some earlier OSX versions.
Currently:
Powerbook G4 (2), OSX 10.5.8, and 10.4.11
iMac G4, OSX 10.3.9
PowerMac 8600, OS 9.2
PowerMac 8500 (2), OS 8.x, OSX 10.1 Server
Mac IIci, OS 8.x or 7.x (have to check)
Mac LC III, OS 7.x or 8.x (currently powerd off, but can be resurrected, used for terminal emulator
(I've made use of these myself to get screen captures, and extract sound resources via ResEdit or Resorcerer for my own port of some legacy software).

Old Homesite user needs some CS3 customizing help

Thanks for taking a look,
Well I finally got CS3 after using HS5.1 for the last 7 or 10 years! It is fantastic! So far so good though it is taking some getting used to...
I was hoping that someone could be so kind to help me with a couple things, I would be greatly appreciative to say the least.
First, How do I customize the toolbars? I was able to add things to all the toolbars before so was wondering if there's similar customizability in Dreamweaver. I saw a favorites tab but can I add the 12 or so buttons I use alot in there and then have that as the default tab on opening?
I used to select text and then (using a custom toolbar button/shortcut) click the div tag. I am not sure how to use the new one because it only has id or class and create new css style where I'm used to writing a style attribute/tag - (sorry if my nomenclature is off) in there myself.
I really like the new view as you go. How do you make it so when looking in design half or full the images are not in a 'selected' type state or does that mean something?
Lastly, I used to have a keyboard shortcut to do a number of things like blockquote and change case to upper or lower. I cannot find any of those! Where oh where (Brother Where Art Though) can they be?
Thanks again in advance for your help!

Hello,
You can save a work space after setting it up or customising it to your needs: window > workpace layout > new workspace..
On the right side, open the panel for css styles (or under window). This panel has another window for properties under it and on the statusbar of that little panel is + sign. Click on it to make a new rule. You can also right click the last css rule and then click "Edit" to go in to the css selector/properties applet or you can opt to open the css file and write the rules directly..usually you will have a tab also for the css file at the top.
You can go to: http://www.adobe.com/designcenter/video_workshop/ ( click on products | select a title | play video )
Adobe does not leave you up the creek without a paddle!
zabberwan

I Need some assistant and HELP with my iPod Touch soon

Note: Look up above at the Top to read my Problem that I am having with my iPod Touch.
Can Someone Please HELP ME with my iPod Touch, I am running out of patience, normally when I do need help here I usually get help and a reply within ONE day, but I have posted my problem YESTERDAY, why isn't there someone not replying to my request?? I am getting 55 views but no replys, isn't there anyone out there that can help me??
I need HELP to reset my IPod Touch to where I had it when I was able to send emails. (can't send emails anymore from my iPod Touch)
I want to be able to sync and send my iPod Touch sent emails info. to my Computer email program, does anyone know how to do that?
PLEASE HELP ME AND REPLY if you can solve my problem ASAP.
Trisha Foster

Agreed! If you want help soon, call Apples paid support line. Now while you were waiting for us to slowly get around to answering you, you could have downloaded the manual for the ipod, so that you understood the function of the mail sync options in itunes. Mail sync only copies the settings needed to access your mail servers, from the mail client on your computer, over to the ipod touch. It does not copy any actual mail messages, and does not copy any settings from the ipod back to your mail program. The advanced section is meant to be used if you have messed up the settings on the ipod itself. It will ignore any changes to bookmarks, contacts, or mail settings depending on which you check, and will copy new information to the ipod. So in your case if you are able to access, and send mail correctly from the account on your mac, then clicking on the sync mail account button in itunes as well as the replace info on this ipod whatever in the advanced section should transfer over the correct mail account settings to your ipod.

Need some Info and help.

Dear Friends,
I have two selects running something like this:
select <column-names> from <table-names> where <conditions>
union
select <column-names> from <table-names> where <conditions>.
there are three outer-join conditions in the first select and
three outer joins in the second like:
c=l(+)[in the first select]
d=m(+)
e=n(+)
and
f=l(+) [in the second select]
g=m(+)
h=n(+)
The result here generates 52 rows which is correct.
Now the case is that I am removing the union clause from the above SQL
and converting it like this.
select <column-names[1]>+<column-names[2]> from <table-names[1]>+<table-names[2]> where <conditions[1]>+<conditions[2]>
but i get the error:
same table cannot be outerjoined to two tables in the same query because i now have this
in the new query :
c=l(+)[from the first select]
d=m(+)
e=n(+)
f=l(+) [from the second select]
g=m(+)
h=n(+)
if I remove the join like:
c=l[from the first select]
d=m
e=n
f=l(+) [from the second select]
g=m(+)
h=n(+)
the query executes but results into 160 rows too much of unneeded redundancy, which is wrong.
My question is that:"Is there any way to do this? I mean to remove the union and combine the two selects into one without affecting the result of the Query which should be 52 rows only (while not affecting the joins I think this should also be the case)".
Need your suggestions.
Thanks,
Vishal

The union set operator performs a sort and deletes duplicates as a part of its definition.
If your revised query gives you the correct results only with duplicate rows then a select distinct may be all you need.
The cost of the sort and duplicate delete operation will affect your query performance but as the output result set is fairly small I do not think it will make much of a difference.
HTH -- Mark D Powell --

Need some advise and help Transferring files one mac to other

I have created quite a problem for my self and can not seem to get out of it.
I transferred my system from the G4 to the new Intel IMAC. Ended up with two accounts on the new Intel IMac. Was told to go to user/ and transfer files from one account to the other. Lost all of my files. Can not get the netscape back on with my bookmarks, Safari does not have any of my stored bookmarks, Quicken, Family Reunion are locked. Have done the permission repair. Still messed up.
To add to this, I than decided to retransfer from G4 to Intel IMAC, but can not establish a target disk using Firewire. Follow the instructions holding T down and the screen comes up saying to reboot or shut down, it will not go to the target mode. And it does not appear that the G4 has a firewire extension now, it did two days ago. Can any one help?

The Windows drive is probably formatted NTFS which is not natively writable
by the Mac. It should be formatted as FAT32 to be usable on both.
Dave

Need some sort of help: Solaris 9 (intel)

Similar Messages

Maybe you are looking for