Need some steps on configuring Database gatewaye with R12.2

I installed DGateway for SQL server on other oracle home and i have ERP running on other server.
As per doc i need to add tns. Do i need to add this tns to ERP Listerner home ? Or i need other oracle database to run this.

This is probably not the right forum for this kind of question, but you can probably type lsnrctl status and check which parameter file / oracle home it is using. That's the one you will have to modify I suppose.

Similar Messages

Some steps for configuring Network are skipped in installation Solaris 10

Hi everybody !!!
I'm a newbie in Solaris 10. I had some problems in installation Solaris 10:
I downloaded installation packet for x64/x86 (DVD) on site Sun.I want to install Solaris 10 on my PC AMD 2500+.I connect to internet through a LAN.
1)In process installation, some steps for configuring Network ( from 5 to 15 in Solaris 10 installation guide) were skipped automatically. It has been directly moved to 16-th step(setup Time and region). Then i tried to finish installing it. But in working with it, i recognized that Network card had been not found( i use NVIDIA nForce MCP Networking Adapter). I typed some command in console shell :
$netstat -in
loo...........
and received only one row like above.
i have tried some times , but not succeeded
2)Port USB is also not working
Please help me. Thanks a lot !!!

hi Vantuan,
guess I just posted reply to your other post...
also check Sun hardware compatibility list for your network card here:
http://www.sun.com/bigadmin/hcl/data/sol/components/views/networking_all_results.page1.html
- Jags Desai

Steps to configure XML Gateway in Oracle

Steps to configure XML Gateway in Oracle

Hello,
This is not relevant to Integration - B2B as you might want to post this query in Ebusiness suite forum.
Rgds,Ramesh

I need a step motor and controller compatible with LabView Can you recommend any

I need a step motor compatible with LabView and I thought i would check with you before i moved forward in my experiment

Dear chapbs,
I've attached a sample cart below to show you the components for a possible setup of your system. Keep in mind that whatever stepper drive you purchased would power your motor. If you go ahead with the purchase of a controller & drive, I would highly recommend contacting NI to insure that you purchased the correct accessory components and cables to connect & power the components. I hope the sample cart is helpful. I created it by browsing ni.com, adding items to my cart, and then saving the cart to an excel file. Please post back if you have additional questions.
Best Regards,
~NH
Attachments:
SampleCart.pdf ‏145 KB

Please help�. I need a steps for configuration

Dear All,
Plese help me.... I am new in StorEdge configuration.
Please give me the steps for configuration of Sun StorEdge 3310
Thanks

You didn't mention it yet, but ...
Have you gone through the manuals?
http://docs.sun.com/app/docs/coll/3310scsi-array*

How to configure Database console on R12.1.3

Hii
I want to configure Database Console on my oracle R12.1.3, and my Database version is 11.2.0.2.
When i tried to run "*emca -config dbcontrol db -repos create*", it fails when giving the password for DBSNMP that invalid username/password error.
What will be the default password for DBSNMP user?? Or can i change the password for DBSNMP user.??
Plz help me in solving the issue
Waiting for your replies,
Thanks in advance.

When i tried to run "*emca -config dbcontrol db -repos create*", it fails when giving the password for DBSNMP that invalid username/password error.
What will be the default password for DBSNMP user?? Or can i change the password for DBSNMP user.??
Please see these docs.
Master Note for Enterprise Manager Configuration Assistant (EMCA) in Single Instance Database Environment [ID 1099271.1]
EMCA Failing with Invalid Password for Dbsnmp [ID 1264024.1]
EMCA Fails With "Invalid username/password" for DBSNMP or SYSMAN user when Creating DBConsole [ID 337260.1]
Troubleshooting the "ORA-01034: ORACLE not available" and "Invalid username/password." Returned by EMCA when creating DBConsole [ID 550484.1]
Thanks,
Hussein

I need some (make that lots of) help with buttons

Hi,
I am a new designer and I am working on my first web site for free. It started out as something I was capable of doing but it has now expanded into a site that is challenging for me. Anyway, I am having a lot of confusion with with making flash navigation buttons for the site.
This is what the person wants. In the up state he wants the button label in text only. In the over state he wants the text with a gray line behind it that slowly expands onto the page. In the down state he wants the same thing but have the text color change and the line color to change. This line is also suppose to stay on the page until the user moves the mouse again. Ultimately the line should also stay fully extended for a sub-menu.
This is what I have done. I have been using action script 2 so I can use the behaviors panel. I made two different movie clips, one gray and one white, using shape tweens to slowly expand the lines.
I started out with the lable only and turned it into a button. It showed in the "up" section of the time line and I put a fram in the "hit" section (layer 1).
Next I inserted a new layer (layer 2) and put a keyframe in the over section of the timeline and made a gray box for behind the text and attached my gray movie clip to the end of it. I put layer 1 above layer 2 so that the text would show through. I did basically the same thing for layer 3 in the "down" section
except changed the colors to black and put a keyframe in layer 1 to change the text color.
Now this is what I get when I play the movie in flash. I have a button that the "hand" appears in only one very small section of it below the text. It does not appear when I hover over the text. When I "hit" the line keeps repeating the movie. I know this is a behavior but when I use the behavior panel to put in play and stop it shows the event as none. As for my black line in the down section, it plays so fast that it might as well not be there. How on earth do I stop it and get it to remain on the page? I also should tell you that I know very little about action script just in case that is the direction that I need to go.
Thanks

You'll probably have to spend some time learning how to create buttons and movieclips that do what you want, which is what you are in the thick of at the moment. For the small area you say reacts to the mouse, the Hit frame is used to define the area that you want to be reactive... so if you had a tiny dot in the normal frames, you could add a big dot in the Hit frame to make it easier to get the mouse to work with the button... the Hit frame content does not display.
For the movieclips, you need to add stop(); commands at the end of their timeines if you don't want them to loop.
Another approach you might consider is to create your buttons as movieclips rather than as button symbols. Going this route gives you much more control of how things behave, but does involve some actionscript to make them behave as if they were buttons for the various states. Some people do not use button symbols and will only use movieclip versions of them.

Need some Guide regarding Configuration of Sender Mail Adapters....

Hellow All Members,
Can anybody refer me to some blogs other than SAP's own help which talks about use and configuration of sender mail adapters...
Thanks in Advance,
Sugata

Hi Sugata,
These links i guess should help you understand clearly as to how to configure your sender mail adapter.
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/23/c093409c663228e10000000a1550b0/frameset.htm">Configuring the Sender Mail Adapter</a>
<a href="/people/prasad.ulagappan2/blog/2005/06/07/mail-adapter-scenarios-150-sap-exchange-infrastructure Adapter scenarios SAP Exchange Infrastructure</a>
<a href="/people/michal.krawczyk2/blog/2005/03/07/mail-adapter-xi--how-to-implement-dynamic-mail-address Adapter (XI) - how to implement dynamic mail address</a>
Also refer these links:
http://www.microsoft.com/exchange/evaluation/compare/ClientCompare.mspx
http://www.microsoft.com/exchange/evaluation/whatis.mspx
http://www.trincoll.edu/depts/cc/documentation/email/IMAP_vs_POP/default.htm
http://www.imap.org/papers/imap.vs.pop.brief.html
Also please go through these notes:
804102
xi 3.0 mail adapter with pop3 user authentication problem
810238
XI 3.0 Mail Adapter for POP3 may not report some errors
Just an additional info "sender mail adapter is to convert e-mails to XI messages"
Regards,
abhy

How TO use configurable Database connection with ADF BC

I have developed a simple JSF/ ADF BC web application that connects to a database and read/display data from the db tables. I have successfully deployed the application to Tomcat 5.5.17. However, now i need to change the database the application is connecting to. My question is How can I change the Database connection without having to change the application modules or rebuild the war file ??? In other words, is there a specific file (xml) where the database connection can be changed?

If you set up the application with a data source (I am not sure if this is possible using another app server, I use OC4J), then you would just change it there. However if you created a database connection in the JDEV and pointed your data model to that, then you will have to change and rebuild.
You might be able to edit the xml file that contains the setttings, I am not sure my CM guys dont allow this, all of our changes have to go through our code repository.

Help, I need my older PowerMac configured to work with my Airport Extreme

So, I have a powerbook laptop that works perfectly with the Airport Extreme that I just bought. However, I also have an older desktop that technical support told me was decided obsolete(even though it runs on tiger,10.4.9!) and they refused to give assistance to configure it to the airport.
My modem only has one ethernet port. Theoretically, you can use the extra port on the airport extreme to connect, via ethernet cable to the desktop(because it has no airport card.)
Does anyone know how to configure my PowerMac G4(model 3,5 serial number xb1381c2ksd) so that when it has it's ethernet cable routing through the airport extreme to the modem, the internet will connect?
Thank you

Steph_D., Welcome to the discussion area!
Configure the PowerMac G4 to use Ethernet and DHCP to get an IP address. That is all you need.

Need Document/steps for configuring Samba,apache,tomcat

Hi all,
I need steps/document for configuring samba,tomcat,apache in solaris 10 x86.please guide.please send to [email protected]

docs.sun.com should have a lot od the Solaris specific documentation- I don't know how much it would have have specifically on Samba, Apache and Tomcat etc.
Documentation on configuring Samba and Apache (and probably Tomcat) are available on the respective websites. You may want to Read The existing technical Manuals then post questions on specific issues that are not covered by the exisitng documentaion.

Access key needed when creating a new database table with SE11

Hi,
I'm using SAP Testdrive (evaluation) on linux in order to learn a bit about ABAP programming. I want to create a new database table in the dictionary to be used in my programs. I proceed in the following way:
1) I run the SE11 transaction
2) At the first entry I write the name of the table to be created (in the Database Table field)
3) I click on the create button.
But then the system asks me an Access Key to register, where can I get this?
Thanks in advance,
Kind Regards,
Dariyoosh

Ok I found the answer to my question in another thread
Developer Key
Make sure that your program names starts with "Z" or "Y", otherwise the system will ask you to register the object because it thinks you are creating/changing in the SAP namespace.
In fact this was my error, my table name didn't start with neither "Z" nor "Y".
Kind Regards,
Dariyoosh
Edited by: dariyoosh on Nov 13, 2010 12:34 PM

I need some input from the iphone community with regards to an App that I'm looking for.

If anyone has any suggestions I'd appreciate it. If I'm posting in the wrong place, I apologize.
Many times I take pictures of schedules, reciepts, or itinerary and send it via mms or e-mail to my daughter @college. Often I'd like to "highlight" specific info on the picture, but the apps that let me do this only offer this feature on a PDF file. (I already have goodreader) I have the app Labelbox which would be great in this instance, (I can place labels anywhere on a photo) however, none of the labels they provide are transparent/flourescent. Drawing apps are messy and don't provide the kind of coverage I need for neat highlighting of specific words or sentences. In short, does anyone know of an app that will let me place transparent labels on specific places on a photo? (Being able to change the width or length would also be an added bonus)
TIA

Yes. However, some folks like to use the Combo OS updates directly from Apple's Download site rather than going through Software Update.
BTW: Have you checked the places where you keep your music CDs if you have any?
If you are using a computer desk, the insall discs should always be kept in a safe place not to far from your computer or at least in a place where all your other computer stuff is.
All of my CDs relating to my computers are kept in a CD/DVD binder inside my computer desk drawer.

Hello need some help on a few things with email sending and rec.

I have had my bb for a while but am only now really trying to utilize it for more. I am able to access my yahoo and gmail accounts on it and sync. However when I tried to import my address book from sbc or tried to add the blackberry email I have run into problems. It will let me send an email on the bb using the bb email address however I have no idea where it ends up on the desktop though. I can't send out anything on the outlook from either account. I am very frustrated to say the least. The only reason I am wanting to get the bb email set up as there are thousands of items on the outlook that tell you don't remove from the outbox. Hope that some of this makes sense. Thanks Carla
I have a curve 8310
Message Edited by CarlaVM on 09-12-2009 08:52 PM

Welcome to the forums CarlaVM
I am a little confused by your post. Could you please clarify a little better.
If I understand correctly, you have added yahoo and gmail accounts to the blackberry so that it receives email's from those accounts on to your phone.
What is "sbc" that you are trying to import your address book from? And expand on why you can't add the "blackberry email" (is this the email that says [email protected]?)
If you send email using your blackberry account ([email protected]) the sent email is only stored on your phone (and nowhere else). I would send emails using either your yahoo or gmail email account so that it will save a copy in your email accounts as a backup.
I don't understand what you mean by sending from outlook? What does this have to do with the phone?
Take a look at this section of the forums for tips and tricks: http://na.blackberry.com/eng/support/blackberry101/#tab_tab_curve
I am a little confused by your wording so if you can clarify further I'm sure I, or somebody else, will be able to help you further.
Cheers
Kijana
Please remember to:
1. Mark Accept as Solution on the appropriate post once your issue has been resolved
2. Give Kudos to helpful posts (click the star next to the post)
Thanks

Need some help - here is the problem with I import.

I am importing a flv file. The flv file runs fine outside of Premiere. When I import it, the audio imports fine. The video however imports and displays when run at SUPER slow mode.
For example, when I run the imported movie, and let say all I am doing (my movie) is counting from 1 to 10 (via audio) and moving my mouse cursor slowly from the bottom of the screen to the top (visually), My mouse cursor will still be rising from the lower 1/4 of the screen while I hit 10 (audio wise) in number.
If that example is too confusing to understand, sorry... The video is just not matching the audio in speed and is sizeable different.
Anyone know what is going on here?

> Any ideas on what I might be doing wrong at the import level?
I'm not sure you're doing anything wrong. I had the exact same issue with Camtasia files that I was using for some tutorials.
Is there any way to get the source file before it was converted to .flv?
Do you have the entire Creative Suite? If so, set up a dynamic link to an AE comp that contains the .flv file. IIRC, that worked for me before I decided to edit the tutorials in AE anyway. The only potential issue I see is that the processing overhead for a 2-hour dynamically-linked comp may exceed what your system (or Pr) can handle.

Need some steps on configuring Database gatewaye with R12.2

Similar Messages

Maybe you are looking for