Need someone helps for several Problems on my 9630 Tour

Hello,
Well, these are list of problems with my 9630 Tour, and I need some helps to solve these :
1. My 1st problem is, everytime my 9630 started its also a message appears : "uncaught exception index 8 >= 8"
2. And I also realized that some missing application happened. My m-Banking application (already re-installed well) but it also lost of SMS icon. So the result is, everytime I sent an outgoing SMS I couldn't save it. And I have made a test to sent SMS from my other number to this 9630 device, but 9630 couldn't show that any incoming message, even my other device has given me notification that message has been delivered.
3. Its also often shutdown suddenly by itself, or its shutdown upon charging
4. Charging tasks sometime couldn't be well charged. And finally I realized that my device has off in the middle of charging task, it may caused of charging wasn't recharge the device very well
Hopefully I can read your kindly solution on those problems happened. Thank you for your prompt response.
Anwar Hussein

Hi and Welcome to the Community!
I actually think that all of your issues are related, and rooted in the same problem...OS corruption or hardware failure. But, before you begin, please be sure you have a good backup...see the link in my auto-sig on this post for instructions for that process.
Then, at the top of each device forum, there should be some "sticky" threads that discuss the OS levels available for many models. If they include your model, then please use those as reference as you proceed. Otherwise, you will have to dig through the official download portal for OS packages for your model:
http://us.blackberry.com/support/downloads/download_sites.jsp
From a PC, you can install any compatible (e.g., for your exact BB Model Number) OS package to a BB via this procedure:
http://supportforums.blackberry.com/t5/BlackBerry-Device-Software/How-To-Reload-Your-Operating-Syste...
Note that while written for "reload" and the Storm, it can be used to upgrade, downgrade, or reload any BB device model -- it all depends on the OS package you download and install to your PC. If that OS package is from a carrier other than the carrier for which your BB was originally manufactured, then delete, on your PC, all copies of VENDOR.XML...there will be at least one, and perhaps 2, and they will be located in or similarly to (it changes based on your Windows version) these folders:
C:\Program Files (x86)\Common Files\Research In Motion\AppLoader
C:\Users\(your Windows UserName)\AppData\Roaming\Research In Motion\BlackBerry\Loader XML
Be sure that you remove, from your PC, any other BB device OS packages as having more than one installed to the PC can cause conflicts with this procedure.
You may also want to investigate the use of BBSAK (bbsak.org) to perform the wipe it is capable of.
You may also want to try this procedure to perhaps narrow down the precise causal item:
Load your OS "bare bones"...if anything is optional, do not install it.
If the behavior presents immediately, then try a different OS with step 1
If the behavior does not immediately present, then run for as long as it takes for you to be sure that the behavior will not present.
Add one thing -- no matter how tempting, just one.
If the behavior does not present immediately, then again run for long enough to be sure it will not have the same problem
Repeat steps 4 and 5 until all things are loaded or the behavior presents
When the behavior presents, you know the culprit...the last thing you loaded.
If the behavior does not re-present, then you know that either step 1 or 2 cured it.
If the behavior presents no matter what, then you likely have a hardware level issue for which no amount of OS or software can cure.
If you are on MAC, you are limited to only your carriers sanctioned OS packages...but can still use any levels that they currently sanction. See this procedure:
KB19915How to perform a clean reload of BlackBerry smartphone application software using BlackBerry Desktop Software
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Similar Messages

I just replaced my macbook's batter and charger about a month ago, but it hasn't been charging for about 2 days now? Could someone help identify the problem and/or provide a solution.

I just replaced my macbook's batter and charger about a month ago, but it hasn't been charging for about 2 days now? Could someone help identify the problem and/or provide a solution.

Try Resetting the System Management Controller (SMC)

My itunes radio rebuffers every 8 seconds - is there any fix or help for this problem. I am running the latest itunes on a new Mac with 4MB download speed.

My itunes radio rebuffers every 8 seconds - is there any fix or help for this problem. I am running the latest itunes on a new Mac with 4MB download speed.

You need to update your Mac OS to at least 10.5.8.
Itunes 10+ requires Mac OS 10.5.8+

Hello please hepl me in my problem in apple id, i cannot connect to my ipad mini in itune store and app store because they find me a credit card but i dont have credit card. what can i do now? i need an answer for this problem. thank you

hello please help me in my problem in apple id, i cannot connect to my ipad mini in itune store and app store because they find me a credit card but i dont have credit card. what can i do now? i need an answer for this problem. thank you

I would suggest that you buy a visa or mastercard gift card and put a few dollars on it and use it to access the store. Just add money to it before you want to buy something from the store and it will act like a normal credit card for you.

My Ipad reboots over and over again could someone help with my problem?

My Ipad reboots over and over again, could someone help with my problem?

Try a reset. Hold the Sleep and Home button down for about 10 seconds until you see the Apple logo.

What does a new non-DE user need? | Help for a Wiki page

Hey Archers,
I'm using Arch with the Compiz Standalone Window Manager and I need some help for a project.
It turns out (who knew) that computers need a lot more to run smoothly than just a desktop and applications. You need network managers, gtk themes and much much more. Now, Desktop Environments such as GNOME and KDE provide a lot of these programs built-in, good for them, but I'm looking to build my system as dependency-free as I can and the big DE's don't really provide that. Especially GNOME just ropes me in whenever I want to use the tiniest piece of it (darn you gnome-keyring).
So I come to you fora, with a quest for information. I want to compile an overview of essential and useful applications with minimal dependencies that allow a CompizIndy user to build his system freely. And if I get enough information, I want to turn it into its own page for the Wiki so it becomes easier to get started with a birds-eye view of what you need to flesh out your system (not exclusively for CompizIndy btw). So please help me!
What applications/daemons/tools should a new system install? I'm not asking which ones are the best or worst or your favorites, just which kinds do you need --that aren't covered in the install guide--?
For example it's advisable to get:
Panel/dock
desktop manager
network manager
compositing manager
a tool for managing removable devices (ntfs-3g etc)
a packer/unpacker
a screensaver
power management
alt-F2 runcommand
custom keybindings
a user switch/logout manager
a volume manager
etc.
So what do you recommend? What do you need to get up and going?
Hoping to hear from you guys and girls,
Matthias
PS: if I'm doubling up on anything, please let me know and save me effort and embarassment ^_^
Last edited by Matsjo (2011-01-28 20:37:26)

There are many threads on this, although individual ones asking for "the best app to do XXX". You could try searching those. Also Search for the LnF Awards threads. you might find a few ideas there. We also have wiki pages for light-weight applications which might be useful
Panel/dock none
desktop manager none
network manager netcfg
compositing manager none or xcompmgr (for basic compositing)
a tool for managing removable devices (ntfs-3g etc) udiskie or udev rules or devmon
a packer/unpacker coreutils eg - tar, bzip etc with an alias called "ex" in .aliases
a screensaver none
power management ???
alt-F2 runcommand gmrun
custom keybindings xbindkeys
a user switch/logout manager none
a volume manager see udiskie....
BTW, if this is for you, then simply install Arch and use a non DE based WM --- eventually you will figure out what you are missing

Hello plz i need yours help i have problem with my i cloud back up when i restore old back up t

hello >> plz i need yours help i have problem with my i cloud back up when i restore old back up my problem exact with contact cause it disappears from contact list

iPhone: Transferring information from your current iPhone to a new iPhone

I need some help for an explanation. Loop for 1 minute.

          int minute=1;
          long currentTime=System.currentTimeMillis();
          long stoppingTime = currentTime + (minute * 60 * 1000);
          while (currentTime<stoppingTime) {
               // do x;
               currentTime=System.currentTimeMillis();
          }I want to have the loop to run for 1 minute. It does not seem to work.
What did I miss? I need some help for an explanation.

Ran:
class PrintTimeAsProcess {
public static void main(String[] argv) throws Exception {
    int minute=1;
    long currentTime=System.currentTimeMillis();
    long stoppingTime = currentTime + (minute * 15 * 1000);
    System.out.println("START Time: "+currentTime);
    while (currentTime<stoppingTime) {
      currentTime=System.currentTimeMillis();
    System.out.println("END Time: "+currentTime);
}Got:
START Time: 1149278202718
END Time: 1149278217718
1149278217718
-1149278202718
15000

Hi i need some help im having problems the ipod can not be turned , in fact it was working fine but suddenly switched off and did not return to light n because it reconnected and if I had drums

hi i need some help im having problems , the ipod can not be turned , in fact it was working fine but suddenly switched off and did not return to light n because it reconnected and if I had drums . what can i do to turned on .
its an ipod touch 64gb

That symptom is covered here:
iPod touch: Hardware troubleshooting

Need Video Chat for several users / one platform

Need Video Chat for several users / one platform
I thought Facetime might be good, but it works only for Apple. So, Skype it is.
Need a way to let users to video chat. Any suggestions?

You can use Skype group video call which is free.
Want to record Skype calls, check out at:
hereandhere

HI ALL SINCE TWO DAYS I AM DOWNLOADING VIBER BUT I AM NOT HAVING MY ACCESS CODE AND EVERY TIME I DELETE THE APPLICATION AND DOWNLOADING IT AGAIN BUT ALWAYS THE SAME RESULT PLEASE I NEED YOUR HELP FOR THE ACCESS CODE.MY PHONE NUMBER IS 0022996969896.THANKS

HI ALL SINCE TWO DAYS I AM DOWNLOADING VIBER BUT I AM NOT HAVING MY ACCESS CODE AND EVERY TIME I DELETE THE APPLICATION AND DOWNLOADING IT AGAIN BUT ALWAYS THE SAME RESULT PLEASE I NEED YOUR HELP FOR THE ACCESS CODE.MY PHONE NUMBER IS 0022996969896.THANKS IN ADVANCE

try this website this should help you http://helpme.viber.com/index.php?/Knowledgebase/List/Index/1/iphone

Need urgently help for OBIEE Installation (11g)

Hi all,
I am having problems trying to install Oracle Business Intelligence 11g on Windows 7.
The Installation Wizard hangs on the step: Domain Configuration (0%). The Creating Domain shows In progress.
The log under the Inventory directory shows me only following:
INFO: Ending the inventory Session
INFO: Using an existing InstallAreaControl for this Inventory Session with existing access level 1
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
I really don't know what to do. I am searching for a solution on Internet, but I don't find it.
I need urgently help. I would appreciate someone could help me.
We can do together via Webex or something similar. It doesnt worth it for me to type here and wait till someone give me an answer (if any), trying to find out how I did.
I hope to find the help I need. I am desperated :-(

Can I install the OBIEE 10g version?I am not sure but i think OBIEE is not certified with windows 7. i could not find any MOS doc confirming same. Please log a call with oracle to confirm this.
would it work fine with the Oracle Database 11g and the RCUs?. Yes OBIEE 10g will work with oracle database 11g.
Thanks,
JD

In serious need of help for huge Premiere Pro Picture glitch. Confounded beyond belief.

Gents and ladies, I have been at this for two days and am in desperate need of help. Right now my editing in Premiere Pro is completely stalled due to a bizzare picture glitch. I am 100% stuck and unable to edit.
When I add a picture to my bin, it's ok. Then I add a second and it seems fine. But any and all pictures I add after that show up as the first picture. Never mind that the name of the file appears correct.
The picture itself, both the thumbnail and the picture in the timeline, etc. are just the first picture.
I have rebooted,restarted, started new projects with new settings, cleared the Premiere Pro cache... NOTHING works.
Video is not a problem. Only pictures. And I am now dead in the water as a result.
Look at this screenshot. See how the other than the second picture they are all the same? Well, they shouldn't be. But they are. And I am stuck and unable to edit at all as a result.
WTH is happening here?
I have Premiere Pro 5 on a PC from Adobe Production Premium.
One issue I have had recently is in the middle of editing Premiere Pro will start conforming video that has already been conformed prior.
Begging for help here.

I guess I should expect a snarky answer from someone named "Snarky McSnarkster." You are being quite rude. It is not helpful to tell someone to fix a glitch by buying new software. That is not a solution. I could just uninstall and re-install, but I am not going to risk losing all of my current projects if something goes wrong. That is like a thermonuclear option. And spending a grand on new software is insane when I don't need it. The software has been fantastic since I bought it. But glitches happen and so I have been in this forum before and always found a solution via some helpful experts.
It is also absurd to call me disinterested when I have engaged with everyone here and answered all of their questions. Just because I have tried most of what has been suggested and explained as such does not make me the bad guy.
As for Ann Bens' question: We have seen this issue in the past and re-save was the solution. Are these images RGB?
Yes, most are RGB. Some I have tried are CMYK. I have tried jpegs, tiffs, bitmaps, png. I am completely clueless as to how this is happening.
I am about to try opening Photoshop, opening a bunch of pictures and savings them to a new HD, then starting a brand new project.
For those who have made suggestions, thank you.

Need urgent Help for Kernel upgrade......

Hi Gurus,
I have recently upgraded SAP kernel from Release 6.40 Patch 109 to Release 6.40 Patch 175. My System is SAP ERP Central Component 5.0 and Release is 6.40 and Kernel Stataus is showing below details:
Kernel release    640
Compilation       SunOS 5.8 G
Patch Level       175
ABAP Load         1521
CUA load          16
Mode              opt
~
I have total 8 Application servers. today I have genereated EWA report and in that report, for SAP kernel section it has reported that <b>"You are running different SAP kernel releases on your instances. This situation may lead to severe problems and is not supported by SAP.
Recommendation: Use only one kernel release for all instances."</b>
Actaully I have updated kernel in my central instance (/sapmnt/<SID>/exe) and this directory is NFS mount in all the application server. So I am not sure why the SAP EWA is repoting this that you are running difference SAP Kerenl release.
If this is correct then how to rectify it ? what action I need to take to resolve this ?
Appreciate your help.
Thanks & Regards
Basis

I will plan to do that as early as possible. Even I
am going to write to SAP to release that note in
english for better understanding.
yes - that note should be translated giving the importance.
My question is: Am I on HIGH ALERT for this issue ?
Since it is production server, will it going to
affect my system in any aspect ??
No, you will just see a slightly higher usage of "nfsd" when you start the application servers for the first time since they will all copy parts of the kernel locally.
2nd thing, This is applicable only to NW ? Because I
have upgraded SAP Kernel to Patch 175 to other R/3
system having more application server, but I didn't
get this comment in my EWA report ?
The comment isn´t related to to usage of sapcpe. The comment means, that you have at least one application server, that uses local binaries with a different patchlevel instead of those on the central instance. I would consider that more critical. Maybe you installed one of the servers later and used a newer installation CD set which creates that new structure for using sapcpe by default... don´t know, just a guess. To check, go to SM51 and select each server and press on "Release Information", you will see which one is affected.
This week I am planning to upgrade kernel for 4.6D
release to Patch 2307. Will this be gona issue for
that also ?
Kernels lower than 6.10 use a different approach (the "ctrun directory" mentioned in that note) - technically it´s the same. The installation guides for 4.6c should tell you how to set that up.
Markus

I need someone help me about "Call Failed".

Excuse me. I live in Taiwan and my english is poor.
I have a strange problem.
When I receive a phone call or call out, I press the "Speaker" to talk then my phone shows "Call Failed" every time.
I try to restore my phone, but the "Speaker" still don't work.
Is this the firmware or hardware problem?
Have someone the same problem?
(My phone is iPhone 3G 16GB, Model MB500T, Version 2.2.1, Modem Firmware 02.30.03)
Please, I need your help.

I live in Taiwan, but I bought the iPhone in Italy.
So the agent of Taiwan don't fix or replace it.
I feel so sadly.

Need someone helps for several Problems on my 9630 Tour

Similar Messages

Maybe you are looking for