Need someone to help with the essay topic

Hi,I am given a topic"testing is the only sure way to find errors" to discuss the truth or otherwise
Anyone got some ideas by what areas shall I go for?
Cheers!

Frankie9 wrote:
Thanks for your replying.I learned a lot.
The essay just require for one page only,so what main point do you recommand to focus on then?
Or can you give me some clues?Well, what do you think?
Can you think of any other ways besides testing to find errors?
Do you think any of these are "sure ways"?
Do you think testing is a "sure way" and why or why not?
In one page you're not going to be able to say much, so try to come up with a few key points related to the above questions.

Similar Messages

So I need a little help with the Flash Colors

I always use the Red, Blue and Green gradient Flash colors below for metalic stuff, but how can I get the effect in this red color in different colors like Yellow?

If you want to use the preset gradients, what you could do is first color whatever area you intend to with one of them, and then select the fill and use the Color panel to change the red to whatever other color you prefer. If you have never worked with the gradient section of the Color panel, you will probably find it a bettter tool to create and fine-tune transitions.
You just doubleclick that little red square in the lower left and it opens a color swatch like the one you showed to select another color

Contact Apple Support Welcome back. Do you need help with the same topic?

Hello I've got a problem in the security questions I do not know whether there are alternative email how to restore security questions and alternate email.
Thank you
<E-mail Edited by Host>

You are not talking to Apple support by posting here. This is a public user to user technical support forum and you should not post personal information on here.
If you want help, then go and contact Apple support and NOT a technical support forum.

Hey i am unfamiliar with how to use icloud for storage. Can some one slowly( lol ) help me to understand how this thing works. I also need someone to help with how to transfer pics from your iphone to your flash drive.

Hello i am needing some assistance as i am not very good at how the cloud works. I need to delete my account and start over. I don't want to loose all of the things that i have on phone. Help!

Slowly
http://www.apple.com/icloud/features/
but surely
http://www.gottabemobile.com/2011/10/18/how-to-sync-email-contacts-and-calendar- with-icloud/
we will come
http://transfer-iphone-contacts.blogspot.com/p/iphone-contacts-sync-via-icloud.h tml
to understanding
http://support.apple.com/kb/PH12519
on how icloud sync and backup work.
http://www.apple.com/support/icloud/backup/
http://support.apple.com/kb/ht1766
And here we will find instructions on how to backup (import) pictures to computer, cause there is no direct transfer to flash drive.
http://support.apple.com/kb/ht4083

Creating a card dealing animation - Need a little help with the Math

Hi Guys,
This isn't a Java specific query per se but your advice would be greatly appreciated in order to add animation to Java card game I've developed.
If I've posted this in the wrong forum, please let me know and I'll re-post it elsewhere.
What I am trying to achieve is card dealing animation whereby a card is show moving from the deck position to its final position.
The trouble I am having is how to achieve the path from where the card is dealt from to its final dealt position.
Could somebody please point me to the right Math?
A visual representation of what I am trying to achieve is at the below link:
http://img266.imageshack.us/img266/3235/exampleg.jpg
The black square represents the deck. The red square represents where the next card is dealt to with an animation showing the card leaving the deck and following a specific path to its final position in one of the red squares.
Any advice would be appreciated.
Edited by: Faz_86 on Jun 20, 2010 2:46 PM

If you make a mathematically clean even animation from point A to point B, it looks artificial. Our brains are designed to spot tiny details. You can see this in the development of (hand-drawn) animation: early cartoons looked too smooth; later (by the 30's I think) animators learned tricks to make things seem more realistic or at least visually engaging.
So if you look at the frames of a character moving, sometimes the first frame in the movement goes in the opposite direction of the larger motion. I believe you'd want something like this when the action is supposed to be driven by a conscious mind, as opposed to, say, a physics simulation.
Applying this... if you're dealing cards, maybe the cards will leave the deck first moving in the opposite direction for a couple frames, then going in the correct direction, to make it look like a dealer is moving them. I'm just brainstorming ideas here.
If you get a book on traditional animation techniques, it'll probably have some good ideas.

I need a little help with the console

Ok, I'm writing a calender class, and i have an add method in it. It basically adds a certain number of days to a certain date and tells you what you get. I'm having some problems getting it to work right so I'm debugging it by having it print out every date as it adds one. Well, the dates I have to use for school (yeah it's a project) are 7 years apart (to include 2 leap years), but when I run the test program the console window is only so big and I can only read what it printed about 6 months back. Anyone know how to make the console window bigger?

Nevermind, I fixed it. Thanks anyway.
(I don't know how to delete this so if somebody else
can, please do)Wrong approach. Tell us what you did, so if anyone will see this at a later stage (like if they had a similar problem and searched the forums), they will benefit from your findings...
Kind regards,
lutha

Can anyone help with the java applet issue

Hello everyone,
This is my first thread in this forum,
I need a little help with the form developer...
I have oracle 9i db , 9i form developer
I don't want to run the form i created as a java applet
HOW IS THAT DONE i.e NOT IN THE INTERNET EXPLORER?????????
***IF ITS POSSIBLE

Hello,
I don't want to run the form i created as a java applet
No chance, because the Web Forms client is an applet and cannot be anything else.
Francois

New to the World Mac and I need help with the internet?

Hi All,
I've purchased a second hand eMac from a local College last summer and I've finally got around to connecting it to the internet (after 20 + years of working and using PCs). All is great or I thought???
There is a few problems that I still encountered and hopefully someone can help?
The spec of the Mac is 1 GHz PowerPC G4 (768 MB SDRAM) running Mac OS X Vers. 10.3.9.
For the internet I connect via Safari 1.3.2 (v312.6). However, I cannot access Hotmail, selected sites outside of the UK and also when I go into Facebook the interface (layout) is a mess and I can't access various options available. I tried to download Safari 4.0.4. for SnowLeopard, but it won't allow it as I don't have the Billings of Materials?
Does anyone know how I can resolve the above or point me in the correct direction.
Many thanks in advance, JJ

Welcome to the Apple Discussions!
Version 1.x of Safari is old in Internet years, and many sites using advanced coding (or non-standard coding) won't render properly. Later browser versions have more support for the non-standard HTML that for instance MS webpage programs generate as well as support for more recent authoring tools. Which is a long-winded way of saying you're on the right track, you need to update your browser.
The later versions of Safari require OS X 10.4 or later. Your eMac can be upgraded to 10.4 or 10.5, but it'll be easier to first try a free third-party browser such as Firefox or Camino or Opera (Version Tracker and MacUpdate are good links to start from when looking for software and updates).
Note: moving among different browsers on different platforms, I can confirm that it's all too common for sites to render differently, with layouts off from a little to a lot.
As for being blocked from non-UK sites and Hotmail, if that still crops up with Firefox, check to see if the school that sold you the computer had proxy servers set yp that might be blocking some sites. You can also go to Apple menu, System Preferences, show built-in Ethernet or Airport depending on which one you use, click on the Proxies tab, and see if anything is checked/active there.

I really need someone to help me. I have been trying to figure out how to select a PDF document to convert to a Word doc. When I go to select a PDF file, all that shows up is the WORD docs. does not show ANY of my PDF files... Please help me figure out wh

I really need someone to help me. I have been trying to figure out how to select a PDF document to convert to a Word doc. When I go to select a PDF file, all that shows up is the WORD docs. does not show ANY of my PDF files... Please help me figure out what is going on? We have it set on auto renewal so I know its not that we haven't renewed this subscription, because we pay automatically.

Hi olivias,
It sounds like there may be some confusion on your system about what application should be associated with PDF files. You can reset filename associations by following the steps in these articles (depending on your operating system):
How to change the default application for a file type | Macworld
http://windows.microsoft.com/en-us/windows/change-default-programs#1TC=windows-7
Please let us know if you have additional questions.
Best,
Sara

Need some help with the colour profile please. Urgent! Thanks

Dear all, I need help with the colour profile of my photoshop CS6.
I've taken a photo with my Canon DSLR. When I opened the raw with ACDSee, the colour looks perfectly ok.
So I go ahead and open in photoshop. I did nothing to the photo. It still looks ok
Then I'm prompt the Embedded Profile Mismatch error. I go ahead and choose Discard the embedded profile option
And the colour started to get messed up.
And the output is a total diasater
Put the above photo side by side with the raw, the red has became crimson!!
So I tried the other option, Use the embedded profile
The whole picture turns yellowish in Photoshop's interface
And the output is just the same as the third option.
Could someone please guide me how to fix this? Thank you.

I'm prompt the Embedded Profile Mismatch error. I go ahead and choose Discard the embedded profile option
always use the embedded profile when opening tagged images in Photoshop - at that point Photoshop will convert the source colors over to your monitor space correctly
if your colors are wrong at that point either your monitor profile is off, or your source colors are not what you think they are - if other apps are displaying correctly you most likely have either a defective monitor profile or source profile issues
windows calibrate link:
http://windows.microsoft.com/en-US/windows7/Calibrate-your-display
for Photoshop to work properly, i recall you want to have "use my settings for this device" checked in Color Management> Device tab
you may want to download the PDI reference image to check your monitor and print workflows
and complete five easy steps to profile enlightenment in Photoshop
with your settings, monitor profile and source profiles sorted out it should be pretty easy to pinpoint the problem...

Hi, I need someone to help me change the login screen. The computer I have is a macbook, its second hand and probably around 3-4 years old. The previous owner had the login screen has a lego or something. Could someone please help me change this??

Hi, I need someone to help me change the login screen. The computer I have is a macbook, its second hand and probably around 3-4 years old. The previous owner had the login screen has a lego or something. Could someone please help me change this??

computerilliterate52 wrote:
hi all, i hope someone is very computer litterate about java that is i have a dell 2400 pc windows xp 2, well since msn isnt downloading anymore java updates we all have to download a compatible one to our computer i use explorer and i can play www.iwin.com online games, yet when i go on to the msn browswer it wont load the games all i see is it just trying to load and load nothing said and nothing done. what could be wrong it works on ie and not msn browser? i have zone alarm, i have avg spyware tester and spyblaster, but i thought it may of kept me from downloading all this yet it worked on IE please help and i dont have flash player either it wont seem to work any and i mean any help is welcome.i tried to change the browser settings and did all that stuff i am on broadband DSL and they dont seem to know they say that isnt there job its msn's so i asked them and they said no it is quest broadband since i am with them i just get the run around i have IE 6.0 ihave java plug in 1.4.2. o3 yet it says not verified, i have java 1.6.o o1 i have java plugin 1.6.0 01 i have that twice ? dont know why. and java envirinmemet i have the right stuff cuz like i said it plays or works on explorer not msn browserer bar. i see no picture's in center of the page as it tries to load it is a blank page any help thank you i have been trying going on 3 weeks now thanksI agree with the other posters; try Firefox. It sounds like a bit of a mess and what you may need is an onsite PC tech to do some maintenance on your PC.
Also, learning to properly use punctuation (particularly periods) might not be a bad idea. As it is, your post was very hard to read.
Good luck!

I still need help with the Dictionary for my Nokia...

I still need help with the Dictionary for my Nokia 6680...
Here's the error message I get when trying to open dictionary...
"Dictionary word information missing. Install word database."
Can someone please provide me a link the where I could download this dictionary for free?
Thanks!
DON'T HIT KIDS... THEY HAVE GUNS NOW.

oops, im sorry, i didnt realised i've already submitted it
DON'T HIT KIDS... THEY HAVE GUNS NOW.

I need help with the conditional build tag option RoboHelp 10

I need help with the conditional build tag option. I want to apply CBT to content in a topic. I looked at the Help topics and believed that I applied the feature correctly. Howver, it is not working as desired. In the 2nd sentence below I want the text highlighted in blue to only appear for the printed output and the text printed in purple to only appear for the .htm /online output. Please help.
There are common tasks used to manage the folders in the Navigator and the folders
in the BBS Folders Viewer Grid. For more information on these common tasks see Help
and Support in Success Enterprise. click the links below.

Hi there
Using tagging is a two part process.
Part One
You create and apply the tags to the information you wish to control.
Part Two
You create a Build Expression that is used when you generate your output. The Build Expression typically reads something like: NOT Tag1 (or whatever your tag name is)
Then when you generate and use the Build Expression, the information tagged is not included in the build.
Cheers... Rick

I need advise and help with this problem . First , I have been with Mac for many years ( 14 to be exact ) I do have some knowledge and understanding of Apple product . At the present time I'm having lots of problems with the router so I was looking in to

I need advise and help with this problem .
First , I have been with Mac for many years ( 14 to be exact ) I do have some knowledge and understanding of Apple product .
At the present time I'm having lots of problems with the router so I was looking in to some info , and come across one web site regarding : port forwarding , IP addresses .
In my frustration , amongst lots of open web pages tutorials and other useless information , I come across innocent looking link and software to installed called Genieo , which suppose to help with any router .
Software ask for permission to install , and about 30 % in , my instinct was telling me , there is something not right . I stop installation . Delete everything , look for any
trace in Spotlight , Library . Nothing could be find .
Now , every time I open Safari , Firefox or Chrome , it will open in my home page , but when I start looking for something in steed of Google page , there is
''search.genieo.com'' page acting like a Google . I try again to get raid of this but I can not find solution .
With more research , again using genieo.com search eng. there is lots of articles and warnings . From that I learn do not use uninstall software , because doing this will install more things where it come from.
I do have AppleCare support but its to late to phone them , so maybe there some people with knowledge , how to get this of my computer
Any help is welcome , English is my learned language , you may notice this , so I'm not that quick with the respond

Genieo definitely doesn't help with your router. It's just adware, and has no benefit to you at all. They scammed you so that they could display their ads on your computer.
To remove it, see:
http://www.thesafemac.com/arg-genieo/
Do not use the Genieo uninstaller!

I have changed my Apple ID name and I want to change it on iCloud, however I am not able to delete the previous account because I need to turn off the Find my iPhone - and for that I need to log in with the old name and that is not working. Help anyone?

I have changed my Apple ID name and I want to change it on iCloud, however I am not able to delete the previous account because I need to turn off the Find my iPhone - and for that I need to log in with the old name and that is not working. Help anyone?

Hey tulgan,
This link will provide information on what to do after you change your Apple ID:
Apple ID: What to do after you change your Apple ID
http://support.apple.com/kb/HT5796
Welcome to Apple Support Communities!
Take care,
Delgadoh

Need someone to help with the essay topic

Similar Messages

Maybe you are looking for