Need Someone with a V210, Imaging problem

We've acquired a new V210, and I'm trying to get it going. IT has no CDROM, so My plan was to build a Bootable Disk (ufsdump + Restore ), and do the installboot for the V210 Platform, the put the Disk in the V210. BTW, I'm using an E450 to build the Disk.
Solaris Version is 9 ( the latest one, just downloaded it ).
The thing boots, but it can't find its boot device to fsck it. Of course, that means it never gets far enough to reconfigure its devices (with boot -r or touch /reconfigure ) No new devices means no keyboard....
I'm 99.9% sure this is fixable by slapping a tar of /devices and /dev in from a running V210, then moving the Disk and booting again. I've done this to the e450, and it worked (even moving a Solaris 9 tar onto a Solaris 8 partition).
But I don't have this Tar File:
Can anyone with a V210 (preferably 36 GB drive(s) ) please run this tar and send me the files (they will be Ultra-Small, they'res no real files int hem):
tar -cvf /tmp/devices.tar /devices
tar -cvf /tmp/dev.tar /dev
Please and Thank you !
Eric Aksomitis
mailto:[email protected]

If your E450 has a CDROM you could "mini JumpStart" from it using InfoDoc 27794: http://sunsolve.Sun.COM/pub-cgi/retrieve.pl?doc=finfodoc%2F27794&zone_32=27794 and using the first procedure.

Similar Messages

  • Need help with a very strange problem

    I've been using Macs since the Apple IIe and I haven't seen anything like this. I need some help "diagnosing" where the problem might lie, and what to do about it.
    I have the dock to appear and disappear automatically. But when I run the mouse down to the bottom of the screen, it doesn't appear. I have to "click" in that area to get it to appear. Also, when I select a menu in the finder or in an application, and then scroll through the menu items, they do not highlight as they should. I can click on an item to activate it, but they aren't highlighted as I scroll through.
    Also, in some applications, windows don't appear and disappear normally as they should. For example, with Adobe Lightroom I have it set up so that the adjustment panels on the left and right automatically appear and disappear. But they aren't doing that anymore.
    A restart and permissions repair will temporarily solve the problem, but it inevitably returns (sometimes within an hour, sometimes a few days). I have three users on my computer, and it happens in each user account.
    A couple days ago, I did an archive & install. That didn't fix it. Then yesterday I did a full reinstall of Leopard and then used Migration Assistant and Time Machine to migrate my users & applications to the new install. After I repaired permissions and rebooted, the problem was right there again.
    It doesn't seem like the problem is with a user account, since all three accounts have it. So why didn't a reinstall of the system fix it? And what can I do now?

    Althought the behavior is the same in all three accounts, if all are working accounts I would suspect there is something all of them have installed that could be the source of the problem. Try creating a new admin account, and leave it just the way Apple creates it--don't add anything nor modify it in any way. Log into that account and see if it works correctly.
    If that account is also misbehaving, try restarting, and when you hear the chime hold down the Shift key so that you boot into Safe Mode (you'll see a notice in the splash screen about being in Safe Mode). The boot will take longer (perhaps even considerably longer) as the system runs disk repair, empties some caches, disables all third party startup items, as well as all Apple startup items not strictly necessary for the machine to run. See the menus and Dock now behave correctly.
    Since the problem is evidently somewhat intermittent in nature it may take some patience to discover what is wrong. You might also disconnect everything that didn't come with the Mac, reboot, and use only the Apple keyboard and Apple mouse and run for a bit to see how that works. If you are using a third party mouse that required installing something that would be my guess as a "prime suspect" for the cause of the problems.
    Francine
    Francine
    Schwieder

  • Need someone with PP CS3 on PC to convert project file

    Hi,
    I'm hoping someone can help me out.  I have an old project that was cut on Premiere Pro CS2 on a PC.  Now I'm on a Mac with Premiere Pro CS3 and I need to update the project.  So, I need someone that has Premiere Pro CS3 on a PC to open my project file, then save it as a CS3 file and send it to me.  Can anyone help me out?  The project file can be downloaded here: http://www.flowmotionmedia.com/misc/How_You_Doin_07.prproj  It's about 4.7 MB in size.  The CS3 version can be sent to my email: [email protected]
    Thank you very much!

    I think we should also thank Stan's dog, who keeps Stan in a good mood mostly....so little credit is given sometimes to those who deserve it !

  • Need someone with Labview 7.0 to save VI in 6.1

    Hi,
    I need some help. I have a VI that was written in Labview 7.1, but our research grouip only has a license for 6.1. It's a fairly simple VI for controlling a piezo driven microscope stage. I manged to find someone else at the uni with Labview 7.1 to save it in version 7.0. Now I need someone to save it in version 6.1 for me. If anyone could help me out, it'd be greatly appreciated (and would save me a more than a few hours trying to write the VI myself)
    Kind Regards,
    Sam

    Sam Wallace wrote:
    If anyone could help me out, it'd be greatly appreciated (and would save me a more than a few hours trying to write the VI myself)
    Hi Sam,
    i don´t think so. I recommend to write it new. See the attached pictures as a suggestion. You don´t need local variables.
    Mike
    Message Edited by MikeS81 on 05-19-2008 08:07 AM
    Attachments:
    Case2.PNG ‏50 KB
    Case1.PNG ‏41 KB
    Case01.png ‏42 KB

  • Need someone to contact me regarding problem with tablet trade in from today! Very upset!

    I went to the Best buy in Lakeland, FL today with my two children who were eager to trade in their tablets for gift cards. Both tablets were in great working condition, and we even still had the boxes, manuals and accessories. One was a Mach trio stealth 7" and the other Mach stealth lite 4.3". They refused to take the 4.3" one as a trade in, stating it was listed in Best buy's database as a "mp3 player". I questioned this as the tablet itself even has the words "internet tablet" printed on the back, and pointed out that the manufacturer has it listed on their website as a tablet as well. The supposed "manager" that was called over was very rude and argumentative. After I let her know she could go (because I was not going to continue to listen to her rudeness), the other associate who was helping me sat on another register and rang up several people, ignoring me. Finally he asks if he could still help me with anything. Of course I pointed out that I DID in fact still have a tablet there to trade in (which he knew, as he had already began processing it before the manager was called over). This trip left me feeling very sour towards Best Buy... Well, there I left, with one happy child, and the other one disappointed and sad. How can you say a tablet isn't a tablet, when it's clearly labeled as such on the product itself? The exclusions said nothing about the size of the tablet, so I really need some answers.

    Hello AmandaSmith,
    I am very disappointed to read about your poor experience when you went to take advantage of our Trade Up to the New Fire HD promotion at the Lakeland, FL store. As a mom I can definitely relate to how you felt because we love our children so much that it is upsetting to see them disappointed and sad. This should have been a fun experience for the both of them (and you), and I sincerely apologize if the store associates were rude and disrespectful. 
    As long as your tablet meets the minimum requirements of the promotion, then you should be able to qualify for the trade-in to receive a $50 gift card to use towards any other tablet or item. Those minimum requirements are:
    -          The device must be able to power on
    -          Must have a valid serial number
    -          Cannot have a cracked screen
    -          Cannot have any liquid damage
    -          The device cannot be a Barnes & Noble Nook or other eReader
    That being said, I have some further details I would like to share with you, so I will be sending you a private message. To view your private messages please make sure you are logged onto the forum, and click on the envelope in the top right hand corner. 
    I truly appreciate you visiting the forum to share your experience, and please keep an eye out for that message coming your way. 
    Sincerely,
    Maria|Social Media Specialist | Best Buy® Corporate
     Private Message

  • Need help with IE6 box drop problem DW CS4

    Having a problem with this page: http://www.recoverings.com/tarzan.html in IE6. Maincontent drops below the sidebar menu. Looks fine in FF, Safari, IE7.
    All other pages work well. I assume that this has something to do with the width of the .wrapnail and .thumbnail divs, but reducing the margins doesn't seem to help and the images start to get too close together. What am I missing here?
    Can someone help me solve this?
    I would also appreciate any suggestions on cleaning up my CSS. Seems like I have an awful lot of stuff in there. Maybe it's okay but could it be cleaner?
    Thanks for your help,
    Phil

    IE bug Float Drop is fairly common.  Make sure your page wrapper division is wider than the combined width of left sidebar + main content + left & right borders if any.  If that doesn't help, add an overflow: hidden rule to your floated container and make sure you have cleared both floats.
    More about float drop and the expanding box problem can be found here:
    http://www.positioniseverything.net/explorer/expandingboxbug.html
    Nancy O.
    Alt-Web Design & Publishing
    Web | Graphics |  Print | Media Specialists
    www.alt-web.com/
    www.twitter.com/altweb

  • Need Help In Solving Rotation Image Problem

    1 down vote favorite
    Hi guys ,
    I need your help please. I have spent hours trying to solve it but not working.
    I have an image i am rotating when the user clicks on a button. But it is not working.
    I would like to see the image rotating gradually till it stops but it doesn't. This it what it does. After i click the button, i don't see it rotating. But when i minimize and maximize the main window, i see the image just rotate(flip) fast like that. It does the rotation but i don't see it as it is doing. It just rotate in a second after minimize and maximize the main window.
    I thimk the problem deals with updating the GUI as it is rotating but i don't know how to fix it.
    these are the code . Please i have trimed down the code for easy reading.
    public class KrusPanel extends JPanel{
         private Image crossingImage;
         private int currentRotationAngle;
         private int imageWidth;
         private int imageHeight;
         private AffineTransform affineTransform;
         private boolean clockwise;
         private static int ROTATE_ANGLE_OFFSET = 2;
         private int xCoordinate;
         private int yCoordinate;
         private javax.swing.Timer timer;
         private void initialize(){
          this.crossingImage = Toolkit.getDefaultToolkit().getImage("images/railCrossing3.JPG");
          this.imageWidth = this.getCrossingImage().getWidth(this);
          this.imageHeight = this.getCrossingImage().getHeight(this);
          this.affineTransform = new AffineTransform();
          this.setCurrentRotationAngle(90);
          timer = new javax.swing.Timer(20, new MoveListener());
    public KrusPanel (int x, int y) {
      this.setxCoordinate(x);
      this.setyCoordinate(y);
      this.setPreferredSize(new Dimension(50, 50));
      this.setBackground(Color.red);
      TitledBorder border = BorderFactory.createTitledBorder("image");
      this.setLayout(new FlowLayout());
      this.initialize();
    public void paintComponent(Graphics grp){
               Rectangle rect = this.getBounds();
               Graphics2D g2d = (Graphics2D)grp;
               g2d.setColor(Color.BLACK);
               this.getAffineTransform().setToTranslation(this.getxCoordinate(), this.getyCoordinate());
               this.getAffineTransform().rotate(Math.toRadians(this.getCurrentRotationAngle()), this.getCrossingImage().getWidth(this) /2,
                                       this.getCrossingImage().getHeight(this)/2);
              g2d.drawImage(this.getCrossingImage(), this.getAffineTransform(), this);
    public void rotateCrossing(){
                 this.currentRotationAngle += ROTATE_ANGLE_OFFSET;
                 int test = this.currentRotationAngle % 90;
                 if(test == 0){
                  this.setCurrentRotationAngle(this.currentRotationAngle);
                  timer.stop();
             repaint();
      private class MoveListener implements ActionListener {
             public void actionPerformed(ActionEvent e) {
                rotateCrossing();
                repaint();
    //  There are getters and setters method here but i have removed them to make the code shorter.
    }Next 2 Classes
    // I have removed many thins in this class so simplicity. This class is consists of Tiles of BufferdImage and the
    // KrusPanel class is at the array position [2][2]. It is the KrusPanel class that i want to rotate.
    public class SeePanel extends JPanel{
          private static KrusPanel crossing;
          private void initializeComponents(){
       timer = new javax.swing.Timer(70, new MoveListener());
       this.crossing = new CrossingPanel(261,261);
        public SeePanel(){
      this.initializeComponents();
         public void paintComponent(Graphics comp){
       super.paintComponent(comp);
      comp2D = (Graphics2D)comp;
      BasicStroke pen = new BasicStroke(15.0F, BasicStroke.CAP_BUTT,BasicStroke.JOIN_ROUND);
         comp2D.setRenderingHint(RenderingHints.KEY_ANTIALIASING,
                                 RenderingHints.VALUE_ANTIALIAS_ON);
         comp2D.setPaint(Color.red);
         comp2D.setBackground(Color.WHITE);
         comp2D.drawImage(img, 0, 0, null);
         comp2D.draw(this.horizontalRail);
         this.crossing.paintComponent(comp2D);
         this.rob.drawRobot(comp2D);
      public static void rotateCrossing(){
       this.crossing.getTimer().start();
       repaint();
    // i tried below code also it didn't work. so i put them in comments
       Runnable rotateCrossing1 = new Runnable(){  // to be removed
             public void run() {
            crossing.getTimer().start();
          SwingUtilities.invokeLater(rotateCrossing1);
    // MAIN CLASS
    // This is the GUI class which consists of buttons and others
    public class MainAPP{
       SeePanel = new SeePanel();
      // Buttons declarations here and others
    public MainAPP(){
      // all listener registers here
    // Here i call the rotateCrossing() of the SeePanel class but it is not working as i want.
    // I would like to see the image rotating gradually till it stops but it doesn't.
    //This it what it does. After i click the button, i don't see it rotating. But when i minimize and maximize the main window,
    // i see the image  just rotate(flip) fast like that.
    public void actionPerformed(ActionEvent e){
        SeePanel.rotateCrossing();                 
        public static main(string[] str){
    }Please do help me to fix it.
    thanks

    kap wrote:
    1 down vote favoriteHuh?
    ..Please i have trimed down the code for easy reading. ..Perhaps I am just lazy, but I don't actually like reading code until I've seen it compile in my editor & run. That is why I will advise that for better help sooner, post an SSCCE. For SSCCEs that use images, either generate an image in the code, or hot-link to an image available on the internet. I offer some [images at my site|http://pscode.org/media/#image] that you can hot-link to.

  • Need help with a SpryImageSlideShow load problem

    I am using Dreamweaver CS5.
    I have a spryImageSlideshow on my site. I can't get the slideshow to load if there are only 2 images or less in the slideshow. It only automatically loads the large image when there are 3 photos or more in the slideshow. How do I fix this to start with only 1-2 photos in the slideshow?

    Hi
    We usually need to see ALL your code to solve your issue quickly and accurately without a lot of guessing and questions back-and-forth.
    Just rename a copy of your problem page  (such as "test.html")  and upload it to your server, in whatever folder the original page was located, and simply post a link in the Forum and tell us your problem.
    This saves you having to cut and paste miles of code into the Forum for the page and all the dependent CSS, JS etc. files.and saves us from having to recreate all your filles, find your images and then repair your code and test the solution for you.
    I trust this is helpful.

  • I Need Someone To Retouch and Image! PLEASE

    Will anyone help me all i need is to add a logo and change pants on someone.

    Agree with Noel about using the word "Photoshopping." It has become a common term and why not have the extra exposure? We stll say, "I'm going to FedEx my package." (then use UPS) or "I'm going to Xerox this" and probably one that will stick around for a while, "I'm going to Google it." Granted the examples I gave aren't changed in tense like "Photoshopping" or "Photoshopped" and it doesn't truly represent the brand, however everyone knows (or at least most people) know Photoshop is the core product referenced.
    It's actually in a reputable online dictionary (dictionary.com).
    World English Dictionary 
    Photoshop (ˈfəʊtəʊˌʃɒp)
    — vb , -shops , -shopping , -shopped
    ( tr ) to alter (a digital photograph or other image), using an image editing application, especially Adobe Photoshop
    Collins English Dictionary - Complete & Unabridged 10th Edition
    2009 © William Collins Sons & Co. Ltd. 1979, 1986 © HarperCollins
    Publishers 1998, 2000, 2003, 2005, 2006, 2007, 2009

  • Need Help With Waveform-driven Image Effects

    Hi,
    I've been working on a full-dome 3D animation for a couple of years now and I'm looking for someone to help with a custom plug-in for After Effects, Photoshop and/or Combustion. I need to be able to drive filters and effects like Brush Strokes and 'sketchy' noise with the waveform from an audio file. I've been using a very poor mans workflow in which I've mapped the waveform by breaking it up into vertical ranges of varying intensities and then applying respective levels of the effects and filters to the sequential images based on where they fall in the waveform ranges. So for the test Ive done, I've been literally applying Photoshop actions to very small packets of still images from rendered sequences, and it has been dizzyingly time-consuming. Ideally I would want to be able to do this dynamically with a motion graphics package, but really I'm looking for as much help as I can get.
    This project began as my master's thesis and I'm working on it during the free time I have between teaching and freelance work; I don't have much money but I am willing to pay for help with this goal. There is still a lot of 3D work that I still need to do and the rendering process will be slow, so this wouldn't be a job with strict or tight deadlines. The final images will be very large (3200x3200) and with the growth in the full-dome market, these sizes could easily increase. If anyone is interested or could help me with this endeavor in any way, please respond to [email protected] Thank in advance to anyone who reads this.
    Max

    See the SDK_Backwards sample to see how to acquire audio data from a layer. This is the same access method used by AE's own waveform drawing plug-ins. Feel free to contact me directly with any questions.

  • I need help with an Apple ID problem...

    I own a Macbook and an iPod touch, I have downloaded numerous apps for the iPod over the years. 18 months ago my boyfriend got an iPhone 3GS and created an Apple ID but it would not let him download apps due to some kind of issue registering his bank card. At the time I tried to sort it out and told him to get in touch with Apple support but he was impatient and wanted to start getting apps right away so I caved in and let him use my Apple ID. The next day I realised this was a stupid thing to do when all his apps started appearing in my iTunes. However I didn't see it as too much of a problem at the time...
    Tomorrow I am going to pick up my shiny new iPhone 5 (my first iPhone ) and I am worried about plugging it into my Mac and having all these apps that I really don't want around in my iTunes. I am imagining an absolute pain in the bum trying to sort all these apps out and syncing them to the right devices? I would absolutely love to just shift all his apps over to his Apple ID, he has loads of stuff that he needs to keep now. He does not have a computer himself, but there is no real need to plug his iPhone into my macbook ever again. After having a quick read around the forums, there seems to be no simple answer to this problem. If anyone could help with this I would be extremely grateful!

    DoubleSkin wrote:
    I would absolutely love to just shift all his apps over to his Apple ID,
    You can't. All apps are forever tied to the ID used to originally obtain them. In your case, that would be your ID. He really needs to get his own ID, delete these apps, then purchase them using his ID.
    For you, just delete what you don't want from your iTunes library.

  • Need HELP with objects and classes problem (program compiles)

    Alright guys, it is a homework problem but I have definitely put in the work. I believe I have everything right except for the toString method in my Line class. The program compiles and runs but I am not getting the right outcome and I am missing parts. I will post my problems after the code. I will post the assignment (sorry, its long) also. If anyone could help I would appreciate it. It is due on Monday so I am strapped for time.
    Assignment:
    -There are two ways to uniquely determine a line represented by the equation y=ax+b, where a is the slope and b is the yIntercept.
    a)two diffrent points
    b)a point and a slope
    !!!write a program that consists of three classes:
    1)Point class: all data MUST be private
    a)MUST contain the following methods:
    a1)public Point(double x, double y)
    a2)public double x ()
    a3public double y ()
    a4)public String toString () : that returns the point in the format "(x,y)"
    2)Line class: all data MUST be private
    b)MUST contain the following methods:
    b1)public Line (Point point1, Point point2)
    b2)public Line (Point point1, double slope)
    b3)public String toString() : that returns the a text description for the line is y=ax+b format
    3)Point2Line class
    c1)reads the coordinates of a point and a slope and displays the line equation
    c2)reads the coordinates of another point (if the same points, prompt the user to change points) and displays the line equation
    ***I will worry about the user input later, right now I am using set coordinates
    What is expected when the program is ran: example
    please input x coordinate of the 1st point: 5
    please input y coordinate of the 1st point: -4
    please input slope: -2
    the equation of the 1st line is: y = -2.0x+6.0
    please input x coordinate of the 2nd point: 5
    please input y coordinate of the 2nd point: -4
    it needs to be a diffrent point from (5.0,-4.0)
    please input x coordinate of the 2nd point: -1
    please input y coordinate of the 2nd point: 2
    the equation of the 2nd line is: y = -1.0x +1.0
    CODE::
    public class Point{
         private double x = 0;
         private double y = 0;
         public Point(){
         public Point(double x, double y){
              this.x = x;
              this.y = y;
         public double getX(){
              return x;
         public double setX(){
              return this.x;
         public double getY(){
              return y;
         public double setY(){
              return this.y;
         public String toString(){
              return "The point is " + this.x + ", " + this.y;
    public class Line
         private double x = 0;
         private double y = 0;
         private double m = 0;
         private double x2 = 0;
         private double y2 = 0;
         public Line()
         public Line (Point point1, Point point2)
              this.x = point1.getX();
              this.y = point1.getY();
              this.x2 = point2.getX();
              this.y2 = point2.getY();
              this.m = slope(point1, point2);
         public Line (Point point1, double slope)
              this.x = point1.getX();
              this.y = point1.getY();
         public double slope(Point point1, Point point2)//finds slope
              double m1 = (point1.getY() - point2.getY())/(point1.getX() - point2.getX());
              return m1;
         public String toString()
              double temp = this.x- this.x2;
              return this.y + " = " +temp + "" + "(" + this.m + ")" + " " + "+ " + this.y2;
              //y-y1=m(x-x1)
    public class Point2Line
         public static void main(String[]args)
              Point p = new Point(3, -3);
              Point x = new Point(10, 7);
              Line l = new Line(p, x);
              System.out.println(l.toString());
    }My problems:
    I dont have the right outcome due to I don't know how to set up the toString in the Line class.
    I don't know where to put if statements for if the points are the same and you need to prompt the user to put in a different 2nd point
    I don't know where to put in if statements for the special cases such as if the line the user puts in is a horizontal or vertical line (such as x=4.7 or y=3.4)
    Edited by: ta.barber on Apr 20, 2008 9:44 AM
    Edited by: ta.barber on Apr 20, 2008 9:46 AM
    Edited by: ta.barber on Apr 20, 2008 10:04 AM

    Sorry guys, I was just trying to be thorough with the assignment. Its not that if the number is valid, its that you cannot put in the same coordinated twice.
    public class Line
         private double x = 0;
         private double y = 0;
         private double m = 0;
         private double x2 = 0;
         private double y2 = 0;
         public Line()
         public Line (Point point1, Point point2)
              this.x = point1.getX();
              this.y = point1.getY();
              this.x2 = point2.getX();
              this.y2 = point2.getY();
              this.m = slope(point1, point2);
         public Line (Point point1, double slope)
              this.x = point1.getX();
              this.y = point1.getY();
         public double slope(Point point1, Point point2)//finds slope
              double m1 = (point1.getY() - point2.getY())/(point1.getX() - point2.getX());
              return m1;
         public String toString()
              double temp = this.x- this.x2;
              return this.y + " = " +temp + "" + "(" + this.m + ")" + " " + "+ " + this.y2;
              //y-y1=m(x-x1)
    public class Point2Line
         public static void main(String[]args)
              Point p = new Point(3, -3);
              Point x = new Point(10, 7);
              Line l = new Line(p, x);
              System.out.println(l.toString());
    }The problem is in these lines of code.
    public double slope(Point point1, Point point2) //if this method finds the slope than how would i use the the two coordinates plus "m1" to
              double m1 = (point1.getY() - point2.getY())/(point1.getX() - point2.getX());
              return m1;
         public String toString()
              double temp = this.x- this.x2;
              return this.y + " = " +temp + "" + "(" + this.m + ")" + " " + "+ " + this.y2;
              //y-y1=m(x-x1)
         }if slope method finds the slope than how would i use the the two coordinates + "m1" to create a the line in toString?

  • Need help with a mirror image effect

    For most of our product photos, I create a copy of the image, flip it vertically, fade it out, and then move it down to create a mirror image effect. Simple enough. But this one I'm having a problem. The product has 4 legs, and from this view, the back 2 legs are shorter. When I do my normal steps that I listed, I get similar to what you see below. I know all about drawing a marquee around part of the reflection, hitting Ctrl+T and then holding down Ctrl+Shift to skew just what's in the marquee. I've done this technique a lot, but it does not work for this particular image. What do I have to do to get the reflection of the back legs to line up with the actual back legs in the image? Thanks.

    Well, Photoshop is not a 3D rendering program and you can only fake it by painting or assembling the reflection using your artistic skills and knowledge of perspective and reflections. From certain angles and with certain objects this could be quite easily done by just mirroring the 2D image but in other cases like  this it wont' work. I made a quick scene in a 3D program to show you how the refection will actually be in real life - you will see the bottom of the table in the reflection and this is missing from the 2D image. You can assemble and position separately parts of the reflection from the 2D image by using the front sides of the table and and legs but the rest (bottom) of table has to be created from scratch.

  • Need Help With Restoring My Ipod, Problem seems Unique, please help.

    Hi, I have a mini as most of you others do as well. I will outline all the problems and the solutions I have taken to solve these problems, yet they have all failed.
    1) When trying to turn my IPOD on I run across the Folder with the Exclamation Point
    SOLUTIONS: I have tried to reset, and change the format of the drive, both have failed to solve the problem. When I try to connect the ipod to the computer (in disk mode and out of disk mode) it says The Ipod is corrupt it may need to be restored. So I restore the IPOD and it says Disconnect it and replug it into a power source (which I interpret as the wall charger). After I disconnect it (I have tried just disconnecting it when the menu restarts to the APPLE and disconnecting it by manually selecting the IPOD from the source list to disconnect after waiting) and plugging it into the wall charger I get the folder with the exclamation point again. It seems to be a cycle, and I don't know how to break it. If it is a faulty harddrive I guess I will try to replace it using the method outlined in other posts, but if I'm missing anything please let me know. Thank you.

    That's the faulty drive/OS indicator.
    If restoring the iPod from iTunes doesn't work, it's likely that the drive has died and needs to be replaced.
    It's a fairly easy task with the proper tools.

  • I need help with a color calibration problem on my PhotoSmart D7360 please.

    In a nutshell...The solution that HP gives for correcting a red tint when printing grey colors is to go to the toolbox and hit calibrate colors.  I don't have a 'calibrate colors' option in my toolbox.
    The problem I'm trying to fix.  The PS D7360 has started printing greys with a red tint from my Photoshop CS5.  It was working fine and then just started having this problem.  I have installed the newest device drivers.  Then I have uninstalled & reinstalled the printer and the newest drivers.  I clicked on factory settings but it didn't do anything.  I've tried both printer managed colors and photoshop managed colors.  I'm wasting paper, time, money and getting a headache!  I just don't know what else to do.   I'm using Windows Vista(x64)

    Thank you for asking.  I have plenty of ink.  I've printed several test pages before and after the image I'm trying to print and the solid colors are fine.

Maybe you are looking for