Need Standard Data Source Name

Hi Experts,
I am very new to this Technology......
Anyone pls tell the Standard Data Source Name Which is having fileds like Shipping Address, Shipping City, Shipping State.......
Thanks in Advance.
Thanks;
Srinivas

Srinivas,
I believe this information is all stored within "AddressSnapshot" BusinessObjects, but to my knowledge, there is no data source for these.
I think what you're looking for will actually be Business Transaction specific. For example, are you looking for the Ship-To location for Sales Orders, or are you looking for the receiving address for Purchase Orders, or are you looking for Customer address information, etc.
Address information will generally be included as a section of the higher level data source corresponding to specific transactions or master data.
What are you trying to use this information for?

Similar Messages

Modifying Standard Data Source

Hi All,
I am using standard data sources in CRM (0crm_oppt_i and 0crm_oppt_h).I need to modify these standard DS by adding some field in Extract structure.Can any one please provide me detailed step by step approach for doing this.If there is any code to be written can anyone send a skeleton of that code .Please provide detailed approach as I am new to this BW aspect.Thanks in advance.
Regards
Souresh

Hi sarkar
yes you have to write an ABAP code to fill the data in the newly added field in the extract structure.
1)Go to RSA6 and find the data source you need to enhance.--> Display
2)Double click on the Extract structure.
3)Now click on the append structure button to add the required field on to the existing structure.
4) add your required fields with ZZ appended to your field.
5) Save & Activate the append structure. Then go back and make sure you activate the extract structure also.
6) Now again go back to RSA6 and select your Data Source. But this time go to change Data Source to remove the hide option to the enhanced fields. By default theyll be in hide mode. If you dont remove the hide field then this field will not be seen in BW side.
7) Now go to SE38 to write the logic to populate the data into the enhanced field. Program name to write the logic is ZXRSAU01.
8) Check + Save + Activate.
9) Check in RSA3 if data is populated as per your requirement.
10) Replicate your Data Source.
11) Now go to Data Source/ Trans. Structure screen. Now you can see the enhanced field on the right hand side.
Go to CMOD.
1. To Save give Description  createcreate new projectgive the project name
2. Select the radio button Enhancement Assignment and give the Enhancement name you want and press Enter.
3. If the Enhancement is already assigned to some other project it will display the same message saying it is already assigned it some other project.
Click on4. If the Enhancement is not assigned to any project save.
5. Give RSR00001 (For Variable Exits)
6. Activate the Project.
7. and click on the components button.Now go to Display
8. Now Double click on EXIT_SAPLRRS0_001. In that you can see an include ZXRSRU01.
9. Double click on that include, it will say program name ZX are reserved for includes of exit Functions groups.
10. Just Press Enter.
11. Itll Pop-Up a window Create Object.saying Include ZX. Does not exits
modify according to your requirements.
Hope it will help u.
Thanks & Regards
KK

ABAP code to enhance a standard data source

Hi BW experts,
I am a novice in BW and I need to append a standard datasource 0DAT_SRC with a field FLD1 from table TABL1.Extract structure: EX0001.
Can anybody please suggest how this can be done?I guess it requires some ABAP coding to be done in the conversion exits.
Many,many thanks in advance!!

Following are the steps to enhance Standard Data source.
1. goto tc RSA6.
2. Select the Data Source which you want to enhance.
3. Select display Data Source (Ctr+f2)
4. Double click on the Extract structure.
5. click on the Append Structure.
6. Add the required fieds starting with ZZ*.
7. Avtivate the Append Structure.
To populate the data into this field you must have a project created to access the FM 'EXIT_SAPLRSAP_001'.
to Create Project code goto tcode: CMOD
1. Enter the Project name and click on create
2. go to components select the required function module.
EXIT_SAPLRSAP_001 for Transactional DS (RSR000
EXIT_SAPLRSAP_002 for Master DS
Goto SE37 and enter the Respective Function module (ex . EXIT_SAPLRSAP_001) and click on the include zxxxxx. then write the code to populate the extra fields added to the DS.
Sample code:
CASE i_datasource.
WHEN '2LIS_11_VAITM'.
loop at c_t_data into work_ar.
do some selections, some calculations ....
append work_ar to c_t_data. " add a new record
modify c_t_data from wa. " change the existing record
endloop.
endcase.

What is a Standard Data Source for table T006A?

Dear Experts,
As a part of one requirement I need to pull the data from Table T006A which is available in BW as well.
I did many search on forums before posting the same but didnt get clear idea.
I am aware how Units are being updated withing BW but I need to pull the text for all Units within BW.
Do we have any standard Data Source which pulls the data from T006A table?
Thanks in Advance,
Nilesh

Dear Raf Boudewijns,
Requirement is to load the Unit texts(available in table T006A) into one custom InfoObject.
I know this table is already pulled within BW and frequently being updated but didnt get any Standard Data Source which fetches the data from T006A table.
I can create a new Generic Data Source within BW itself based on table T006A. But would like to use Standard Data Source if its available else will have to create a new generic Data Source.
Thanks,
Nilesh

How to change data source name and context root during deployment

Hi,
Env:
WLS 10.1.3
JDev 11.1.1.6
Hudson
I need to deploy two instances of my ADF application on the same development enviroment. We are using Hudson to deploy. My question is how to change data source name and application context root before second deployment.
Kuba

I don't believe there is an inbuilt facility to do this.
Previously how I've done this is when checking files out using Hudson jovs, before the build I then use an Ant extension called XmlTask (http://www.oopsconsultancy.com/software/xmltask/) to modify the required XML files.
Can I ask why you're doing this in the first place please? Multi-tenancy? 2 versions of the same app?
CM.

Problem during the setting the query data source name in forms 6i

We are now doing assignments in forms 6i actually there is a problem during setting the query data source name in run time.
The problem is
declare
v_query varchar2(200),
begin
v_query :='(select empno,ename,deptno from emp where hiredate =' || control .value1 ||')';
go_block('emp');
set_block_property('emp',query_data_source_name,v_query);
end;
that bolded area is the problem that ia varchar value the single qoutes embedded with that value.how can i embedded single qoutes in that concatenation.
That is now query will run like select empno,ename,deptno from emp where hiredate =control.value
But we need like select empno,ename,deptno from emp where hiredate ='control.value'
Message was edited by:
Punithavel

Thanks for your response
We fixed the error
and the answer is
declare
v_query varchar2(200),
begin
v_query :='(select empno,ename,deptno from emp where hiredate = ' ' ' || control .value1 ||' ' ' ) ' ;
go_block('emp');
set_block_property('emp',query_data_source_name,v_query);
end;

Getting "Data source name not found and no default driver specified"

Hi all,
I'm trying to create a connection in SQL Developer (1.5.0.53) to an Access MDB using the Access Tab on the "New / Select Database Connection" window. I navigate to my MDB and then click the Test button and this is what I get:
"Status : Failure - Test failed: [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified"
I do have the 1.6 JVM.
Not a show stopper, but would like to see how SQL Developer works with Access tables, so any help would be appreciated.
TIA,
Steve

This error message sounds like the MS Access ODBC driver or the Jet Engine drivers are not found. First of all you need to check the PATH environment setting if it includes the windows/system32 directory as this is the default directory for the MS Access ODBC drivers.
Next check if you are a normal user or a local admin user. As local admin open the ODBC Adminstartor (Control Panel/administrative tools) and check if a MS Access ODBC driver is registered.
If all above is true, please get from www.sysinternals.com and et the process monitor. Open it and apply a filter: Process name is sqldevloper.exe
Then start SQL Developer and open your created MS Access link. Process mon will now track all info containing all additional DLLs it tries to load.
Check out the generated log file from the bottom (last info about the mdb file load) to the top and look if it really finds all libraries, especially the MsAccess and Jet libraries.

WIS: 10901 Data source name not found and no default driver specified(ODBC)

Hi, gurus.
We've created a universe based on Excel spredsheet or MS Access which is using ODBC connection. Then, I try to create query (which is using these universe) in QAAWS or in InfoView, and when I add a filter object to the query, the error occurs:
"GetDatasourceObject LOV exception (error WIS: 10901)".
If I don't choose any filter options and want to create query, I'm getting the error: ' [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified (error WIS: 10901)'.
We tried to do this in different operations systems - Windows 7 (32 bit) and XP (32 bit).
Anymore, we can use this universes at web intelligence rich client with or without filters.
Need to solve this problem. Please help us.

Dear all,
I got the same problem, I have installed BOE 4.0 at Win XP 64 bits, and also installed Sybase IQ 15.2 (32bit) ODBC, and has create the odbc entry "shkdemo" at the System Tab. However, I still got the same error when using the the "Interactive Analysis" thru "BI Launch pad".
For BOE 4.0, I found that I could only use the BOE Client tools (Universal Design Tool) to create the connection, this client tool I installed it at another 32 bit XP laptop, and I also installed the Sybase IQ 15.2 (32bit) ODBC with the same odbc entry "shkdemo", and using the "Interactive Analysis Desktop, I could be able to create report with data from IQ 15.2.
Kindly advise, why I still got the error of "10901 Data source name not found and no default driver specified(ODBC)" when I use the "Interactive Analysis" thru "BI Launch pad".
Cheers,
Hilda

OBDC Data Source Error - Data source name not found and no default driver specified

Hello,
I get this error whenever I try to use the "Modify Microsoft Access Database" tab to update my
Access 2000 database after a conversion:
Unable to connect to target database.
java.sql.SQLException: [Microsoft] [ODBC Driver Manager]
Data source name not found and no default driver specified
Now, the weird thing is that when I log in as Administrator and go to the "Control Panel" there is
no "ODBC Data Sources" option to chose from. So I went to the "Microsoft ODBC Administrator"
from the "Configuration and Migration Tools" tab instead. I tried configuring "omwb_msaccess"
under the "User DSN" tab with both the name of my Access file, and the "small.mdb" file that was
in the omb directory. No go for either one. Whatever I try I still get the same pop-up box.
Question:
(1) What should I be putting for the "ODBC Data Source" when I try to Migrate my Access Database?
(2) Any other idea/configuration issue I might be missing that could do this? The process works up
to the Access Update point, and I configured the repository correctly.
Thanks
Aaron - [email protected]

Nope, I'd already tried both of those things. I checked again, but no go.
I think the problem may be that I'm not entering the right value in the
"ODBC Data Source" field on the Migration Workbench "Modify Microsoft
Access Database" form - the same one where you enter a "Username" and
"Password" for the conversion. What should I be entering here? What is
the standard filename?
The log files aren't very informative to me. Here is the odbcconf.log:
==============
ODBCConf called with arguments: '/S /Lv odbcconf.log /F C:\WINNT\System32\mdaccore.rsp'
Data Struct:
     Reboot First : 0
     Use Response File : 1
     Response File : 'C:\WINNT\System32\mdaccore.rsp'
     Erase Response File: 0
     Silent : 1
     Continue on Error : 0
     Log Mode : 2
     Log File : 'odbcconf.log'
     Actions:
          8, '(null)', '(null)', ''
          6, 'MS Code Page Translator|Translator=MSCPXL32.dll||', '(null)', '"MS Code Page Translator|Translator=MSCPXL32.dll||"'
          5, 'Microsoft ODBC for Oracle|Driver=msorcl32.dll|Setup=msorcl32.dll||', '(null)', '"Microsoft ODBC for Oracle|Driver=msorcl32.dll|Setup=msorcl32.dll||"'
          1, 'Microsoft ODBC for Oracle', 'CPTimeout=60', '"Microsoft ODBC for Oracle" "CPTimeout=60"'
          17, 'simpdata.tlb', '(null)', '"simpdata.tlb"'
EXECUTING ACTIONS
Executing Action: INSTALLDRVRMGR
          arg1: '(null)'
          arg2: '(null)'
          args: ''
Install Driver Manager succeeded
          Return HR: 0x0
Executing Action: INSTALLTRANSLATOR
          arg1: 'MS Code Page Translator|Translator=MSCPXL32.dll||'
          arg2: '(null)'
          args: '"MS Code Page Translator|Translator=MSCPXL32.dll||"'
INSTALLTRANSLATOR SQLInstallTranslatorEx succeeded
          Return HR: 0x0
Executing Action: INSTALLDRIVER
          arg1: 'Microsoft ODBC for Oracle|Driver=msorcl32.dll|Setup=msorcl32.dll||'
          arg2: '(null)'
          args: '"Microsoft ODBC for Oracle|Driver=msorcl32.dll|Setup=msorcl32.dll||"'
INSTALLDRIVER SQLInstallDriverEx succeeded
          Return HR: 0x0
Executing Action: CONFIGDRIVER
          arg1: 'Microsoft ODBC for Oracle'
          arg2: 'CPTimeout=60'
          args: '"Microsoft ODBC for Oracle" "CPTimeout=60"'
CONFIGDRIVER SQLConfigDriver succeeded
          Return HR: 0x0
Executing Action: REGTYPELIB
          arg1: 'simpdata.tlb'
          arg2: '(null)'
          args: '"simpdata.tlb"'
          Return HR: 0x0
===========
Here is a snippet from the error.log:
==========
** Oracle Migration Workbench
** Release 9.2.0.1.0 Production
** ( Build 20020308 )
** ORACLE_HOME: c:\
** user language: en
** user region: US
** user timezone: PST
** file encoding: Cp1252
** java version: 1.1.8.16
** java vendor: Oracle Corporation
** o.s. arch: x86
** o.s. name: Windows NT
** o.s. version: 5.0
** Classpath:
c:\\Omwb\olite\Oljdk11.jar;c:\\Omwb\olite\Olite40.jar;C:\Program Files\Oracle\jre\1.1.8\lib\rt.jar;C:\Program Files\Oracle\jre\1.1.8\lib\i18n.jar;c:\\Omwb\jlib;c:\\Omwb\jlib\Omwb.jar;c:\\Omwb\jlib\oembase-9_2_0.jar;c:\\Omwb\plugins\SQLServer6.jar;c:\\Omwb\plugins\SQLServer7.jar;c:\\Omwb\plugins\SQLServer2K.jar;c:\\Omwb\plugins\Sybase11.jar;c:\\Omwb\plugins\Sybase12.jar;c:\\Omwb\plugins\MSAccess.jar;c:\\Omwb\plugins\MySQL.jar;c:\\Omwb\drivers\mm.mysql.jdbc-1.2a;c:\\Omwb\plugins\Informix7.jar;c:\\Omwb\drivers\ifxjdbc.jar;c:\\Omwb\plugins\db2400v4r5.jar;c:\\Omwb\drivers\jt400.jar;c:\\lib\xmlparserv2.jar;c:\\rdbms\jlib\xsu111.jar;c:\\jdbc\lib\classes111.zip;c:\\lib\vbjorb.jar;c:\\jlib\netcfg.jar;c:\\jlib\ewt3.jar;c:\\jlib\ewtcompat-3_3_15.jar;c:\\jlib\share.jar;c:\\jlib\help3.jar;c:\\jlib\oracle_ice5.jar;c:\\jlib\kodiak.jar
** Started : Tue Jul 23 12:13:42 PDT 2002
** Workbench Repository : Oracle8i Enterprise Edition Release 8.1.7.0.0 - Production
With the Partitioning option
JServer Release 8.1.7.0.0 - Production
** The following plugins are installed:
** Microsoft Access Release 9.2.0.1.0 Production
** Active Plugin : MSAccess
** Shutdown : Tue Jul 23 12:14:59 PDT 2002
I appreciate any assistance you could render me.
Thanks - Aaron

[unixODBC][Driver Manager]Data source name not found, and no default driver

Hi,
I'm running
Red Hat Linux 5, MySQL and BOXI 3.1
I try and schedule a report in the CMC and the report fails with the error
A database error occured. The database error text is: {Driver Manager} Data source name not found, and no default driver specified. (WIS 10901)
I've went through the steps in the Bus Obj's Documentation outlining how to install the unixODBC (though this doco was for R2 - I'm not certain whether this install is needed for 3.1).
Error WIS 10901 details
Database error: . Contact your administrator or database supplier+
for more information. (WIS 10901)
              The database that provides the data to this document has generated an error.
Cause
              Details about the error are provided in the section of the message indicated
              +by the field code: .
              Contact your BusinessObjects administrator with the error message
Action
              information or consult the documentation provided by the supplier of the
              database.
Any pointers suggestions on how to set up correctly the unixODBC will be looked into.
Thanks for taking the time to view this post.
Cheers

Hi again Aravind,
I hope you're not beginning to wish you had never answered that first question from me since it seems as if I'm now backing up the truck with regard to the entire question. If I'm asking too much from you let me know I don't wanna overstep the line with repect to what should and shouln't be asked in these forums'
anyway I looked in that env.sh script. It was huge (pity I can't attach the file, I've appended it but it makes these threads somewhat lengthy)
DEFAULT_ODBCFILE="$BOBJEDIR"defaultodbc.ini
    export DEFAULT_ODBCFILE
    +ODBC_HOME="$odbc"+
    export ODBC_HOME
also
# setup the mysql env variables
    if [ -d "$BOBJEDIR"/mysql ]; then
            # mysql env variables
set up the odbc symlink to work around:*
The DataDirect SQL Server ODBC driver on UNIX will not function properly under a*
locale other than "en_US" due to strong dependencies on their locale files.*
            MYSQL_UNIX_PORT="$BOBJEDIR"mysql/mysql.sock
            export MYSQL_UNIX_PORT
    We want to be able to source the config file multiple times.
fi
if [ -d "$BOBJEDIR"/tomcat ]; then
set the JAVA_OPTS for tomcat
I see what you were referring to earlier with
if [ -d "$ODBC_HOME/locale" ]; then
      the javascript files are kept here
The machine name
The user name
MYLOCALE=`locale | grep LC_MESSAGES | sed -e 's|LC_MESSAGES="||g' -e 's|"$||g'`The default registry
      if [ ! -d "$ODBC_HOME/locale/$MYLOCALE" ]; then
        ln -s "$ODBC_HOME/locale/en_US" "$ODBC_HOME/locale/$MYLOCALE"
      fi
    fi
Again cheers for your help in this matter.
#!/bin/sh
BOBJEDIR="/home/eberwick/BO_3_1/bobje/"
export BOBJEDIR
BODIR="`dirname $BOBJEDIR`/"
export BODIR
DEFAULTFILE="$
check for existence of u flag, if it is there, turn it off.
Set a flag so we don't source the environment more than once
webi config file
ccm.config"
if [ -f "$DEFAULTFILE" ]; then
    . "$DEFAULTFILE"
fi
. "${BOBJEDIR?}setup/modify_ko_locale.sh"
SOFTWARE=`uname -s`
OBJECT_MODEL=`grep Platform $BODIR/setup/ProductID.txt | awk '{print $4;}'`
[ -z "$OBJECT_MODEL" ] && OBJECT_MODEL=32
SOFTWAREPATH=`grep SoftwarePath $BODIR/setup/ProductID.txt | awk '{print $3;}'`
U_FLAG=0
if [ X"$SOFTWARE" = "XHP-UX" ]; then
unset the LANG so that we don't get the localized version of 'unlimited' if the localized system messages are installed.
raise the ulimits to max allowed
undo that bug workaround from above
figure out what architecture we're on
now that we're localized, deal with unknown architecture
we include English, as localization may have failed
set the JDK variable
    if [ x`echo $- | grep "u"` != "x" ]; then
        set +u
        U_FLAG=1
    fi
fi
if [ x"$BOBJE_ENV_SOURCED" = x ]; then
    if [ -f "$setup/boconfig.cfg" ]; then
    HKEY_LOCAL_MACHINE="$setup/boconfig.cfg"
        export HKEY_LOCAL_MACHINE
    fi
    BOBJE_ENV_SOURCED="true"
    export BOBJE_ENV_SOURCED
    BOBJEVERSION="12.0"
    export BOBJEVERSION
    LANGWAS="$LANG"
    unset LANG
    LC_ALLWAS="$LC_ALL"
    unset LC_ALL
    ulimit -Sn `ulimit -Hn` # max file descriptors
    ulimit -S -c `ulimit -H -c` # max core file size
    ulimit -S -d `ulimit -H -d` # max data segment size
    ulimit -S -f `ulimit -H -f` # max file size
    ulimit -S -s `ulimit -H -s` # max stack
    ulimit -S -t `ulimit -H -t` # max CPU time
    LANG="$LANGWAS"; export LANG
    unset LANGWAS
    LC_ALL="$LC_ALLWAS"; export LC_ALL
    unset LC_ALLWAS
    case X"$SOFTWARE" in
        XLinux) SOFTWARELC="linux"; SHAREDLIBSUFFIX=".so"; CB1LIBSUFFIX="${SHAREDLIBSUFFIX?}.12.0"; CB1SYMLINKLIBSUFFIX="${SHAREDLIBSUFFIX?}.12" ;;
        XAIX)   SOFTWARELC="aix"; SHAREDLIBSUFFIX=".so"; CB1LIBSUFFIX=".12.0${SHAREDLIBSUFFIX?}"; CB1SYMLINKLIBSUFFIX=".12${SHAREDLIBSUFFIX?}";;
        XSunOS) SOFTWARELC="solaris"; SHAREDLIBSUFFIX=".so"; CB1LIBSUFFIX="${SHAREDLIBSUFFIX?}.12.0"; CB1SYMLINKLIBSUFFIX="${SHAREDLIBSUFFIX?}.12";;
        XHP-UX)
                SOFTWARELC="hpux";
                if [ "$SOFTWAREPATH" = "hpux_ia64" ]; then
                        SHAREDLIBSUFFIX=".so";
                else
                        SHAREDLIBSUFFIX=".sl";
                fi
                CB1LIBSUFFIX="${SHAREDLIBSUFFIX?}.12.0";
                CB1SYMLINKLIBSUFFIX="${SHAREDLIBSUFFIX?}.12";;
    esac
    export SOFTWAREPATH
    export SOFTWARE
    export SHAREDLIBSUFFIX
    export CB1LIBSUFFIX
    export CB1SYMLINKLIBSUFFIX
    if [ "$SOFTWAREPATH" = "" ]; then
        echo "$UNKNOWNPLATFORM (unknown platform): $SOFTWARE"
        exit 1
    fi
    if [ -d "$BOBJEDIR"/jdk ]; then
      JAVA_HOME="$jdk"
      export JAVA_HOME
    fi
      JAVA_OPTS="-d$OBJECT_MODEL -Dbobj.enterprise.home=$
fi
setting AAHOME here so when CAD starts the value is set
enterprise120 -Djava.awt.headless=true -Djava.net.preferIPv4Stack=false"
      if [ "$SOFTWARE" = "AIX" -o "$SOFTWARE" = "SunOS" -o "$SOFTWARE" = "Linux" -o "$SOFTWARE" = "HP-UX" ]; then
        JAVA_OPTS="$JAVA_OPTS -Xmx1024m -XX:MaxPermSize=256m"
      fi
      export JAVA_OPTS
    if [ -d "$Dashboard_Analytics_120" ]; then
        AAHOME="$Dashboard_Analytics_120"
        export AAHOME
    fi
    WCSDIR="$enterprise120/$SOFTWAREPATH/wcs/"
    export WCSDIR
    WCSBINDIR="$bin/"
    export WCSBINDIR
    WCSCOMPONENTDIR="$components/"
    export WCSCOMPONENTDIR
    BINDIR="$enterprise120/$SOFTWAREPATH/"
    export BINDIR
    LIBDIR="$enterprise120/$SOFTWAREPATH/"
    export LIBDIR
    PLUGINDIR="$enterprise120/packages/"
    export PLUGINDIR
    PLUGINDIST="$enterprise120/$SOFTWAREPATH/plugins/"
    export PLUGINDIST
    LOGDIR="$append the new valuelogging/"
    export LOGDIR
    if [ x"$BOE_LOGGER_ENVIRONMENT" = x ]; then
        BOE_LOGGER_ENVIRONMENT="-loggingPath $LOGDIR"
    else
        BOE_LOGGER_ENVIRONMENT="$BOE_LOGGER_ENVIRONMENT -loggingPath $LOGDIR"
    fi
    export BOE_LOGGER_ENVIRONMENT
    SCRIPTDIR="$enterprise120/generic/"
    export SCRIPTDIR
    JAVASCRIPTDIR="$setup/jscripts/"
    export JAVASCRIPTDIR
    MACHINENAME=`uname -n`
    export MACHINENAME
    removeUTF8SpecificsForKorean
    STRIPPEDMACHINENAME=`hostname | sed -e 's/\..*//'`
    export STRIPPEDMACHINENAME
    if [ x"$BOBJEUSERNAME" = x ]; then
      BOBJEUSERNAME=`id | sed -e "s|).\$||" -e "s|^.(||" `
      export BOBJEUSERNAME
    fi
    restoreUTF8SpecificsForKorean
    DEFAULT_REGFILE="$BOBJEDIR"setup/.defaultreg
    export DEFAULT_REGFILE
    REGFILE="$BOBJEDIR"data/.bobj
    export REGFILE
    BOE_REGISTRYHOME="$REGFILE/registry"
    export BOE_REGISTRYHOME
    DEFAULT_ODBCFILE="$BOBJEDIR"defaultodbc.ini
    export DEFAULT_ODBCFILE
    ODBC_HOME="$odbc"
    export ODBC_HOME
the PID file location
    PIDDIR="$BOBJEDIR"serverpids
    export PIDDIR
    SQLRULEDIRECTORY="$LIBDIR"
    export SQLRULEDIRECTORY
    PATH="$BINDIR:$crpe/xvfb:$PATH"
    export PATH
    CRPEPATH="$enterprise120/$SOFTWAREPATH/crpe/"
    export CRPEPATH
    MWHOME="$mw/"
    export MWHOME
    BOBJEXVFBPATH="$xvfb/"
    export BOBJEXVFBPATH
    MWUSER_DIRECTORY="$once the crpe is in, we should exit if this file doesn't exist.
Uncomment this to turn off Xvfb security and allow connections from
everyone.
MW_XVFB_AC="1"
export MW_XVFB_AC
Use a seperate .Xauthority file. Comment out this line if you want
to use the user's .Xauthority file for storing the Xvfb authentication
tokens.
registry/"
    export MWUSER_DIRECTORY
    MWRT_MODE="professional"
    export MWRT_MODE
    MWREGISTRY=":$MWUSER_DIRECTORY/hklm_$
Mainwin can deadlock unless this is set
Prevents Mainwin from popping up dialogs in some situations, causing a deadlock
variables merged from RAS
XVFB Manager
Environment Variables:
      MW_XVFB_EXE         = Name of the Xvfb exe.
                            Default is 'Xvfb'.
      MW_XVFB_DAEMON      = Name of the XvfbDaemon exe.
                            Default is 'XvfbDaemon'.
      MW_XVFB_DAEMON_PORT = Port number that Xvfb Daemon will listen too.
                            Default is 5222.
      MW_XVFB_DAEMON_HOST = Host on which the XvfbDeamon is running.
                            Default is Local host.
      MW_XVFB_DAEMON_XVFB = Number of Xvfb to run.
                            Default is '5'.
      MW_XVFB_DAEMON_DISPLAY = Starting display number for Xvfb.
                            Default is '1'.
      MW_XVFB_DAEMON_PROFILE = Path to the Security Profile for Xvfb.
                            Default is 'SecurityProfile'.
      MW_XVFB_DAEMON_TRACE = Set to turn on tracing information.
                            Default is undefined.
      MW_XVFB_DAEMON_DIE = Turn off the exit code if no more connections.
                            Default is undefined.
      MW_XVFB_FONT = Locations from which to load font
By this symbol being defined, the checking for a current set display is disabled.
Set to turn on tracing info when defined. Default is undefined.
MW_XVFB_DAEMON_TRACE=defined
export MW_XVFB_DAEMON_TRACE
RAS Home
.bin"
    export MWREGISTRY
    MWCORE_PRIVATE_DATA="$MWUSER_DIRECTORY/core_data"
    export MWCORE_PRIVATE_DATA
    if [ -f "$MWHOME"setmwruntime ]; then
        . "$MWHOME"setmwruntime
    fi
    MWNT_OLE_DOCS=true
    export MWNT_OLE_DOCS
    MWPRINTER_DPI=600
    export MWPRINTER_DPI
    MWVISUAL_CLASS="TrueColor"
    export MWVISUAL_CLASS
    if [ "$SOFTWAREPATH" = "hpux_ia64" ]; then
        MWTHREAD_STACK="200000"
    else
        MWTHREAD_STACK="FA000"
    fi
    export MWTHREAD_STACK
    MWFONT_DIR_PATH="$fonts/"
    export MWFONT_DIR_PATH
    MW_XVFB_DAEMON_FONT="$misc/"
    export MW_XVFB_DAEMON_FONT
    XAUTHORITY="$xvfb/.Xauthority"
    export XAUTHORITY
    MWDEBUG_LEVEL=0
    export MWDEBUG_LEVEL
    MWINVISIBLE_DISPLAY=1
    export MWINVISIBLE_DISPLAY
   MWNO_SIGCHLD_IGNORE=1
   export MWNO_SIGCHLD_IGNORE
   MWLOOK=motif
   export MWLOOK
        MW_XVFB_DAEMON_PROFILE="$BOBJEXVFBPATH/SecurityPolicy"
        export MW_XVFB_DAEMON_PROFILE
        MW_XVFB_DAEMON_IGNORE_DISPLAY="true"
        export MW_XVFB_DAEMON_IGNORE_DISPLAY
        if [ "$SOFTWARE" = "HP-UX" ]; then
            MW_XVFB_DAEMON_XVFB=10
        else
            MW_XVFB_DAEMON_XVFB=5
        fi
        export MW_XVFB_DAEMON_XVFB
        MWNO_FILE_LOCKING=true
        export MWNO_FILE_LOCKING
        MWNO_SIGNAL_CATCHING=true
        export MWNO_SIGNAL_CATCHING
    RASHOME="$enterprise120/$SOFTWAREPATH/ras/"
    export RASHOME
    LIBRARYPATH="$LIBDIR:$WCSCOMPONENTDIR:$PLUGINDIST/auth/secEnterprise:$enterprise120/$SOFTWAREPATH/crpe:$:$PLUGINDIST/desktop/CrystalEnterprise.Report:$enterprise120/$SOFTWAREPATH/ras:$
May optionally be set to MALLOCMULTIHEAP=heaps:n[,considersize]
where n is scaled to the number of CPUs (usually 2x).
Setting to MALLOCMULTIHEAP=1 enables system defaults.
setting MALLOCMULTIHEAP to 'considersize' fixes an AIX memory leak and significantly reduces the memory footprint.
env variable to fix the default cpu affinity
env variable to fix dlopen/dlclose behaviour to be more like ELF-based systems
aix thread stack overflow guarding : won't catch if overflow is more than 4k, but better than nothing
aix specific ulimit changes
unset the LANG so that we don't get the localized version of 'unlimited' if the localized system messages are installed.
undo that bug workaround from above
set the aix thread scope to system (1:1)
better core naming for aix 5
Check if memory windows is enabled in the kernal parameters
We will support memory windows, either through the "BOE120_HP_MEMWIN_ID" environment variable,
or through the "BusinessObjectsEnterprise120" memory window key in /etc/services.window
Use memory windows if available on HP-UX.
For both HPUX Itanium and PA-RISC
Reduce the number of arenas from 8 (default) to 1 (min) which solves memory blowup issue.
Enable the thread local cache to compensate.
http://www.docs.hp.com/en/B2355-60130/malloc.3C.html
mysql/lib"
    if [ "$SOFTWARE" = "AIX" ]; then
        LIBPATH="$LIBRARYPATH:$LIBPATH"
        export LIBPATH
        if [ x"$MALLOCMULTIHEAP" = x ]; then
            CRConfig env variable for DCP
            MALLOCMULTIHEAP="considersize"
            export MALLOCMULTIHEAP
        fi
        RT_GRQ=ON
        export RT_GRQ
        LDR_CNTRL=IGNOREUNLOAD
        export LDR_CNTRL
        AIXTHREAD_GUARDPAGES=1
        export AIXTHREAD_GUARDPAGES
        LANGWAS="$LANG"
        unset LANG
        LC_ALLWAS="$LC_ALL"
        unset LC_ALL
        ulimit -S -m `ulimit -H -m` # max memory
        LANG="$LANGWAS"; export LANG
        unset LANGWAS
        LC_ALL="$LC_ALLWAS"; export LC_ALL
        unset LC_ALLWAS
        AIXTHREAD_SCOPE="S"
        export AIXTHREAD_SCOPE
        Version=`uname -v`
        Release=`uname -r`
        if [ "$Version" -gt 4 ]; then
            CORE_NAMING=ON
            export CORE_NAMING
        fi
        AIXTHREAD_MUTEX_DEBUG=OFF
        export AIXTHREAD_MUTEX_DEBUG
        AIXTHREAD_COND_DEBUG=OFF
        export AIXTHREAD_COND_DEBUG
        AIXTHREAD_RWLOCK_DEBUG=OFF
        export AIXTHREAD_RWLOCK_DEBUG
    elif [ "$SOFTWARE" = "HP-UX" ]; then
        if [ "$SOFTWAREPATH" = "hpux_ia64" ]; then
            SHLIB_PATH="$LIBRARYPATH:$SHLIB_PATH:$JAVA_HOME/jre/lib/IA64W.0/server"
        else
            SHLIB_PATH="$LIBRARYPATH:$SHLIB_PATH:$JAVA_HOME/jre/lib/PA_RISC2.0/server"
        fi
        export SHLIB_PATH
        MAX_MEM_WINDOW=`/usr/sbin/kctune | grep max_mem_window | awk '{print $2}'`
        if [[ "$MAX_MEM_WINDOW" != "0" ]]; then
            if [[ "$BOE120_HP_MEMWIN_ID" = "" && -r "/etc/services.window" && -x "/usr/bin/getmemwindow" ]]; then
              BOE120_HP_MEMWIN_ID="`/usr/bin/getmemwindow BusinessObjectsEnterprise120`"
              export BOE120_HP_MEMWIN_ID
            fi
            if [[ -x "/usr/bin/setmemwindow" ]]; then
                if [[ "$BOE120_HP_MEMWIN_ID" != "" ]]; then
                    CE_CMDLINE_PREFIX="/usr/bin/setmemwindow -f -i $BOE120_HP_MEMWIN_ID "
                fi
            fi
            export CE_CMDLINE_PREFIX
        fi
        export MARENA_OPTS=1:8
        export MCACHE_OPTS=100:8:0
    elif [ "$SOFTWARE" = "Linux" ]; then
        LD_LIBRARY_PATH="$LIBRARYPATH:$perl/lib/5.8.0/i386-linux-thread-multi/CORE:$LD_LIBRARY_PATH"
        export LD_LIBRARY_PATH
    else
        LD_LIBRARY_PATH="$LIBRARYPATH:$LD_LIBRARY_PATH"
        export LD_LIBRARY_PATH
    fi
    CRCONFIGFILE="$java/CRConfig.xml"
    if [ -f "$CRCONFIGFILE" ]; then
      CRConfig11="$CRCONFIGFILE"
      export CRConfig11
    fi
    if [ -d "$ODBC_HOME/locale" ]; then
set up the odbc symlink to work around:
The DataDirect SQL Server ODBC driver on UNIX will not function properly under a
locale other than "en_US" due to strong dependencies on their locale files.
      MYLOCALE=`locale | grep LC_MESSAGES | sed -e 's|LC_MESSAGES="||g' -e 's|"$||g'`
      if [ ! -d "$ODBC_HOME/locale/$MYLOCALE" ]; then
        ln -s "$ODBC_HOME/locale/en_US" "$ODBC_HOME/locale/$MYLOCALE"
      fi
    fi
This was originally called TMPDIR, but now MainWin supports MW_TMPDIR, so we export MW_TMPDIR
ADAPT00506764 tracks the original issue with TMPDIR/Essbase Connectivity
MySQL now sets its TMPDIR in mysqlstartup.sh
set the tmp dir locally, if the value is not already set.
    if [ x"$MW_TMPDIR" = x ]; then
      if [ ! -d "$BOBJEDIR"/tmp ]; then
        mkdir -p "$BOBJEDIR"/tmp
      fi
      MW_TMPDIR="$BOBJEDIR"/tmp
      export MW_TMPDIR
    fi
Comment this out to turn off custom Solaris memory allocator
    if [ "$SOFTWAREPATH" = "solaris_sparc" ]; then
        LD_PRELOAD="libhoard.so.1"
        export LD_PRELOAD
Need to set up 64-bit specific library path so that 64-bit processes will
preload the 64-bit version of the memory allocator, and not the 32-bit version
        LD_LIBRARY_PATH_64="$enterprise120/solaris_sparcv9"
        export LD_LIBRARY_PATH_64
    fi
setup the mysql env variables
    if [ -d "$BOBJEDIR"/mysql ]; then
mysql env variables
            MYSQL_UNIX_PORT="$BOBJEDIR"mysql/mysql.sock
            export MYSQL_UNIX_PORT
    fi
call env.sh from sub-directories (presumably from add-on installs)
    for dir in "${BOBJEDIR?}/setup"/*
    do
        if [ -r "${dir?}/env.sh" ]; then
            . "${dir?}/env.sh"
        fi
    done
fi
if [ X"$SOFTWARE" = "XHP-UX" ]; then
check for existence of u_flag, if it is, turn it back on.
    if [ "$U_FLAG" = 1 ]; then
        set -u
    fi
fi

STANDARD DATA SOURCE 2LIS_11_VAHDR NOT GETING DATA

RESPECTED GURUS
I AM A NEW BI USER. I AM TRYING TO EXTRACT DATA FROM 2LIS_11_VAHDR WHICH IS A STANDARD DATASOURCE THROUGH RSA3, BUT I AM GETTING A MESSAGE "0 RECORD FOUND" BUT THERE ARE PLENTY OF DATA. I WAS TRIED WITH THE OTHER STANDARD DATA SOURCES AND GETTING THE SAME MESSAGE" ZERO RECORD FOUND".PLS GUIDE ME HOW I WOULD I GET DATA.
REGARDS
ABHAY MAHODAYA

Hi Abhay,
The data source which you are trying to use is comes under logistics. To take the logistics data from R/3 to BW set up table needs to be filled up. To fill the set up table follow the below mentioned procedures.
First Delete the set up table to avoid data duplication:
Go to T.Code: SBIW -> Settings for Application Specific data sources (PI) -> Logistics -> Managing Extract structures -> Initialization -> Delete the contents of the setup table
Fill the set up table:
Go to T.Code: SBIW -> Settings for Application Specific data sources (PI) -> Logistics -> Managing Extract structures -> Initialization -> Filling in the setup table -> Application specific set up of statistical data
Choose the relevant node to perform the set up based on your requirement.
Remember while filling the set up table no entry sould get posted in the relevant tables. So while you do this in production system, you may have to request for user locking for the relevant T.Codes.
All the best.
Regards,
Sarath.

List odbc data-source names

hello,
i would like to show (System.out.println) all odbc data-source names,
which are installed on the machine. whats a common way?
can somebody help me please? thanks!
regards.

Sorry there is no such mehtods or classes in java
for doing this activity
one thing u can do is this
i dont dont know much about windows programming
but i think that we we manually created a datasource by click odbc tab and then adding a datasource assosiating a mdb file to it
then in wondows surely some where it must have registerd
say for example there must be a datasource .ini file
now if this is true then u can do one thing
.ini file is similar to a text file
u can read this file thru FileReader class
and just extract the name sof datasource this is the obly option
\u just need to find where this datasource.ini file is located if at all it is
if u satisfied with my answer i am waiting for my dukes
bye

Data source names

I'm developing an application, which needs displaying of DSNs created in the machine on which the application is running. In some forum listings, the method given is to access the native libraries and access the drivers. I would like to know, if there is any process in Java, through which I can get the data source names, without using the native libraries.
Thanks
Ravi Shankar.

Unfortunately there is no equivalent JDBC method for the ODBC SQLDataSources function.

Standard Data Source for FMGLFLEXT Table

Hello Friends,
The standard data source for the Financials New Legder is 0FI_GL_10 General Ledger: Leading Ledger Balances, which fetches the data from the FAGLFLEXT Table using the Extract Structure FAGL_EXTSTRUCT_LEAD. However there has been a migration of the FAGL table to FMGL table. And now the FAGLFLEXT is no longer populated with any FI postings data. And the new table which is getting the update is the FMGLFLEXT Table. GL Migration from FAGL to FMGL is a standard procedure. However I am not finding any Standard Data Source to fetch the data from the FMGLFLEXT Table.
Can anybody let me know if there is any standard datasource for this or should we create a custom data source to fetch the data from FMGLFLEXT using the FMGL_EXTSTRUCT_LEAD Extract Structure.
Appreciate help in this regard.
VB

Hello Sasi and Kirun,
Thanks for your reply,
The requirement is resolved by the following:
If you want to use your own totals table (in this scenario FMGLFLEXT) as your basis, you first have to create the corresponding extraction structure using transaction FAGLBW01. In this way, all fields of the totals table are transferred into the extraction structure. Further In the OLTP system, call up transaction FAGLBW03 and Configure the DataSource and save your settings.
http://help.sap.com/saphelp_nw70/helpdata/en/be/928f40f5767d17e10000000a1550b0/frameset.htm
Regards,
VB

ERROR [IM002] [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified in windows server 2008 r2

ERROR [IM002] [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified in windows server 2008 r2.I made a application in asp.net c#.I am using ODBC connection.When I deployed my application in windows server2008 r2.There
is no Microsoft ODBC driver shown in ODBC Data source administrator.Then I go to the C:\Windows\SysWOW64 and open Odbcad32.exe and add Microsoft ODBC2 driver for Oracle and when I run my application I got following error
ERROR [IM002] [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified
I am using follwoing string
<connectionStrings>
<add name="theconnetion" connectionString="DSN=abdb;UID=abc;PWD=xyz"/>
</connectionStrings>
Guide me What I do?

Did you add a System DSN or a User DSN? If you added a User DSN from your own login, the asp.net application will not be able to use it unless its application Pool in IIS is configured to run under the same credentials that you used for creating
the DSN. It's better if you add a System DSN.
Also, be careful to ensure that you are using a 64 bit DSN, unless you configure the application to run in 32 bits. If the 64 bit application attempts to use the 32 bit driver you get the same error message "Data source name not found and no default
driver specified". See this KB article:
http://support.microsoft.com/kb/942976/en-us

Need Standard Data Source Name

Similar Messages

Maybe you are looking for