Need start up for MI

Hi All,
I'm new to SAP Mobile and need to develop a POC of a running application.
Presently we have few Java Webdynprop application and few .Net based application which we are planning to mobilize. Current infrastructure include WebAS 7.0 environment with NWDI and test server for CE 7.1 EhP1. We don't have ABAP stack among those servers. We have good expertise w/ Java webdynpro and web services.
I went through various documents and SDN and I believe that 'always-connected' type best suits my requirement. Also tried downloading SAP NW Mobile 7.1 SP3 from SDN (40mb) but the installation couldn't be proceeded as I didn't have a PDA handy (was trying on emulators). It didn't let me proceed installation (Full install) until I connect the PDA..it couldn't understand the emulator. Also is this installation for 'occasionally connected' or for both?
Can somebody please let me know what exactly is need to have a working POC (even w/ emulator).
Thanks a lot!
Abhijeet

Hi Abhijeet,
First of all you need tested infrastructure for Mobile 7.1 (including ABAP Atack), refer following documents:
1. Configuration of SAP NetWeaver Mobile 7.1, Release SPS 01
2. Installation Guide for SAP Netweaver Mobile 7.1 as per database (MS SQL Server) and Operating System
3. Master Guide - SAP NetWeaver Mobile 7.1
4. Media List - SAP NetWeaver Mobile 7.1
5. help.sap.com
Extra softwareu2019s used for creation of Mobile Application UI & configuration of Laptop Client
o NWDS
o MAXDB_WINDOWS_I386
o jdk-1_5_0_15-windows-i586-p.exe
o Mobile Client (NWMCLIENTSETUP05P_1-10004844.ZIP)
There is no separate PDA emulator you'll get the PDA emulator once the installation will be done as per configuration guide mentioned above. Refer media list to download zip files from service market place.
Hope above info will be useful to you.
Romi Malik

Similar Messages

  • When I try to start outlook for mac, i get the message that there is an old version of the Microsoft Database Daemon that needs to be deleted from the start up files. Where do I find the start up files???

    when I try to start outlook for mac, i get the message that there is an old version of the Microsoft Database Daemon that needs to be deleted from the start up files. Where do I find the start up files???

    In the Users & Groups pane of System Preferences.
    (66105)

  • Photoshop CC 2014 closes when start up for a few seconds

    Hi,
    When I try to open the Photoshop CC 2014. It will close after it has started up for a few seconds without any error message dialog in the Photoshop or error log in Event Viewer.
    I have just subscribed for the package Photoshop & Light Room combo yesterday and tried to install the Photoshop CC 2014.
    I have already tried to figure it out for at least 10 hrs in 2 days by searching all the solutions to this kind of problems and tried every means I could do, but nothing really works.
    What I have already tried are as follows:
    1. Un-install the ps cc 2014 with clear preference option and re-install it again with Creative Cloud application, but no luck.
    2. Update Nvidia graphic driver, which it has already been up-to-date, no luck. I even update the windows using window update center, but still get the same problem.
    3. Use Adobe Creative Cloud Cleaner tool after un-install the program. The cleaner tool works fine with successful message and no error message in the log file. Then, I try installing the ps again, but no luck again.
    4. Use the License Update Service tool, but no luck.
    5. Delete the opm.db and lunch the Photoshop again, but no luck, same problem.
    ***6. Rename the folder SLStore to SLStore_old. Open the program and it will ask me to license the software by signing in with my adobe account, it "works" only for the first time. However, once I close the application and open it again, same problem occurs, the program just closes right after I open it again. Now, I have to rename the folder every time I want to use the Photoshop.
    (By the way, this problem happen the same for the LR and now I have to re-name the SLStore folder every time I want to use the LR as well)
    It seems to me that I have some kind of the license problem, but I cannot understand why? and how to fix this?
    I am using Window 7 Ultimate 64-bit SP1 on my VAIO laptop.
    The specifications are Intel(R) Core i7 CPU [email protected], 6.0GB of RAM. The GPU is NVIDIA GEFORCE GT 425M.
    I really need to use the program and that is why I decide to purchase for the package, please help resolve this.
    Any help, any recommendation would be appreciated.
    Thank you.

    I found the solution to this from these thread Re: Photoshop CC opens and then closes immediately. What gives? and Re: Photoshop CC Crashes/Closes within seconds of startup
    I did it and it works for me So, I think I should share this so people who have faced the same issue as I can give it a try.
    Basically, Just uninstall the Photoshop and Creative Cloud, then rename the folder SLCache to SLCache_old. Restart your computer once and then re-install everything again. (CC and PS)
    It should work.
    Thanks

  • I NEED ADOBE SERVICE FOR A REFUND -- TONIGHT

    I'm ready to scream -- I was supposed to be transferred to the department for a refund and instead it timed out and ended my chat:
    The chat line is: (EMPHASIS ON THE RED FONT AREAS -- I NEED TO CANCEL DREAMWEAVER CS6 (AS I WAS ASSURED I WOULD HAVE NO PROBLEM DOING) AND GET A REFUND -- I JUST PURCHASED DREAMWEAVER CC.
    One moment please while we route your chat to a representative.
    All representatives are currently assisting others. Thanks for your patience. A representative will be with you shortly.
    Thank you for contacting Adobe Sales. My name is Gavin. How may I help you today?
    Gavin: Hi, may I have your first name please?
    you: Hi, my name is Barry.  I spoke with your chat line the other night, the night I purchased CS6.  I was on the fence, do I want CS6 (for about $400) or CC (with the ongoing $20 a month fee).  I was told that if I wanted to cancel CS6 and move to CC, it would be OK, since I had only installed CS6 and had not used it yet.  And that I could get the refund for CS6 and install CC at the same time.  At the moment, my purchase from Best Buys had not registered in your system, but I'm sure it has now.  SO THE QUESTION AGAIN -- could you discuss with me the pros and cons of CS6 vs. CC -- I have heard that I will not be able to update/upgrade CS6, that it is close-ended, and that CC will be a constant addition of latest features.  PLEASE ELUCIDATE ME ON WHICH PROGRAM I (A NEOPHYTE WHO JUST PAID SOMEONE TO BUILD ME A WEBSITE) MIGHT WANT TO USE.
    Gavin: Hello Barry
    Gavin: Let me explain that for you.
    you: Hi, -- can you read my lengthy question and provide me your insights, CS6 or CS CC?  Thanks, Gavin - I might have spoken with you the other night even.
    Gavin: No, its with other representative.
    Gavin: Adobe Creative Cloud is our newest option for you, That will give you everything , plus the ability to sync and store your files
    Gavin: If you purchase the software outright at once then you'll be paying the upgrade cost when new version releases but that is not the case when subscribed to Creative Cloud membership since you get free upgrades to future version and will remain current with the latest software tools.
    you: Is there some comparison sheet which would lay out the features and benefits of the two programs, side by side, for an educated decision?  I was told that CS6 if purchased outright is NOT UPGRADABLE -- wouldn't that lean me toward DW CC instead, to stay current as features are added and tools too?  IF THAT IS THE CASE, PLEASE REFUND ME THE CS6 COST AND SIGN ME UP FOR THE DW CC PROGRAM INSTEAD.  I was told you could transfer me to the folks in your place who could make this happen -- but I NEED IT DONE TONIGHT!  My website developer is coming tomorrow and needs an installed program to train me on.
    Gavin: We are connected, right?
    you: sorry, it took time to frame my question
    Gavin: That's okay.
    Gavin: Barry, I see that going forward all new versions will be through creative cloud membership.
    Gavin: I'll help you with the cancellation for your CS6 purchase made once you complete the sign up for Dreamweaver CC, Okay
    you: SO, HELP ME TO A DECISION, GAVIN.  What do I do?  Get the monthly fee program and turn in the CS6 for a refund?  HELP
    you: Lead the way -- BUT.... AND IT'S A BIG "BUT" -- will it be installed and functioning TONIGHT so my guy can train me tomorrow?  PLEASE ANSWER THEN let's get this new sign up & cancellation into action.
    Gavin: I see that there is no option to equalize the CS6 purchase for the CC subscription plan however you need to subscribe first and then will refund the CS6 purchase made.
    Gavin: After subscribing to Dreamweaver CC you can download/ install the software immediately
    Gavin: Sounds great, right?
    you: So you cannot help me -- what do I do?  How do I subscribe first, and how do I get the refund for CS6?  Please advise.  I'm ready to do it NOW! 
    Gavin: I'll help you now with the link to subscribe Dreamweaver CC and then help you to get the refund for CS6, Okay
    you: fantastic -- I'm at your disposal
    you: what do you need from me?
    Gavin: Please click here to subscribe
    Gavin: I'll stand by please let me know once your done.
    you: one last question -- as I said, I'm new to this -- can I later upgrade to Creative Cloud's whole family by just increasing my monthly payment by the difference?  please advise.
    Gavin: Yes, that's possible.
    Gavin: You can later switch or upgrade to complete creative cloud membership when you require other products.
    you: great - I'm purchasing now and will let you know when it goes through
    Gavin: Sure
    you: do I have to un-install CS6 first? PLEASE ADVISE - I'M STARTING TO DOWNLOAD AND DIDN'T THINK OF IT!!!!
    Gavin: Excellent!
    Gavin: You can uninstall CS6 version once you complete the download for CC.
    Gavin: Barry, please stay online while I transfer this chat to our Customer Service Team for more help on cancellation for your CS6 purchase made, Okay
    you: I am online, and DW CC has extracted and is half-way through the next step
    you: by the way, here's my proof of purchase--should I proceed through the entire installation and checking for upgrades.  Need I check for upgrades, or is this the latest version?
    you:   We received your payment - thank you! Here are the details about that order for your records:   Order Details:    Creative Cloud single-app membership for Dreamweaver (one-year) $19.99 per month Order # AD010920985  
    Gavin: Excellent!
    Gavin: Please run the download to install, mean while you cancel the order for CS6 purchase made, Okay.
    you: Ok - how do I cancel it?  Will you turn me over to that department to effect the cancellation?
    Gavin: Yes, please stay online while I transfer this chat.
    you: Dreamweaver CC is now installed.  Thanks for your help, Gavin.  I'm so nervous about this because I can't afford to screw it up and have my website guy come tomorrow and not be able to train me.
    Gavin: Not to worry!
    Please wait while I transfer you to an operator at Adobe Service.
    We are still assisting other customers, thank you for your patience. You can also try our community forums, where experts are online 24/7.
    We are still assisting other customers, thank you for your patience. You can also try our community forums, where experts are online 24/7.
    You are not currently connected to a chat representative.
    Your chat transcript will be sent to [email protected] at the end of your chat.
    We are still assisting other customers, thank you for your patience. You can also try our community forums, where experts are online 24/7.
    You are not currently connected to a chat representative.
    We are still assisting other customers, thank you for your patience. You can also try our community forums, where experts are online 24/7.
    You are not currently connected to a chat representative.

    Hello Barry,
    as one of these DW fans here, I'm very surprised and disappointed how your chat passed off. And I can fully understand your immeasurable disappointment. So I/we won't give up this quickly. Maybe you would succeed by using the written form. The employees have time to reflect your problem in an optional way. Please try it once more and use this form for "Sales Inquiries" (Contact us online):
    http://www.adobe.com/products/request-consultation/marketing-cloud.html?promoid=KAWSG
    Good luck!
    Hans-Günter

  • Advice needed on monitor for Photoshop and Lightroom use

    Hi. I am aserious amature photographer wishing to move to the next level and sell some of my work.
    I just had a custom pc built to work with the new copies of Photoshop CS5 and Lightroom 3 I bought (lots or RAM and HD space, ssd, etc....)
    The last piece of my system is to purchase a monitor. I want to be somewhere in the better then Best Buy but less than NEC/Eizo range in price, or between $500 - $900. I have worked with cameras since the early 80's and moved to digital several years ago but the only post processing I have done is with Photoshop Elements.  I would be doing mostly prints to sell but also need to have a web site to do so. Will also use the pc for daily net surfing... but do not game or watch a lot of video on the pc.
    Being really new to this whole process I have a few questions.
    The first thing I need to decide is whether I need to look for a wide gamut display or not.
    I realize the whole chain must be 10 bit (Adobe -OS - graphics driver - graphics card - display port.
    I have Adobe Photoshop CS5 and Lightroom 3, Win7 64 bit, Zotac ZT 50701 10M video card (which uses GeForce GTX 560  fermi and an nvidia chipset. It does have displayport). I am having a hard time determining whether my video card actually supports wide gamut (10bit).
    Standard vs Wide Gamut? Is wide gamut important enough to deal with the issues it brings (calibration, viewing things other than PS and LR or color managed, which appear to be rare?) Is sRGB good enough for most prints (don't do fine art, mostly nature and portraits but starting to do some HRD things). If wide gamut is the way to go I have no problem with that and have the time to learn about calibration, color management, etc... But I also want to make sure the juice is worth the squeeze.
    24" vs 27"? Is there any advantage to one or the other when editing photos?
    IPS vs PLS? I realize they are similar but are there differences worth noting?
    Glossy vs Matte Anti-Glare? seems to be a lot of comments regarding the anti-glare coating, mostly poor. Yet I can see issues using a glossy screen in my study with a window to my back.
    One manufacturer vs another? I realize Eizo, NEC and LaCie are at the top of the heap. But with my budget, after upgrading my pc and camera equipment, I can't make that work now. So I need to choose from the next group down (Dell, HP, Samsung, Asus...)
    One or two monitors? It looks like many (mid-grade) wide gamut monitors do a lousy job of displaying anything but color managed sites. Is that necessarily true of all the mid-grades? Or can some be used for graphics but as well for routine net surfing, MS Office, etc...? Or am I better off getting two monitors, one for graphics and one for the rest? That would pretty much limit me to 24" or less given my budget (used to using a Dell 21" TN monitor that oddly crapped out just as my new pc was done).
    The more I read reviews the more confusing it gets. There seems to be a difference of opinion even among pros on whether to go wide gamut or stick with an easier sRGB. Realizing a standard gamut monitor would be cheaper, I do want to make the right decision up front, given my budget.
    The one thing I have found astounding is that there is nowhere to actually see many of the monitors I am considering. We live in Nashville TN but my wife is from Atlanta Ga so we drove there a few weeks ago to visit family and for me to visit monitor shops. Even the largest ones there (Fry's and Microcenter) had minimal IPS monitors, a few Dells and HP's. The knowledge of their sales folks was so poor I finally gave up. Felt bad about this until I posted this on another board and got a reply from a guy in LA (second largest city in the US) that he wanted to see a particular monitor and there was no place even there to do so.
    Anyhow, here is what I have considered:
    24" Wide Gamut: Dell U2410 and Asus PA246Q. Dells appear to be good IF you get a good one. The Asus appears to be a clone of the Dell that gets a lot of good press.
    27" Wide Gamut: Dell U2711 that also gets a ton of good reviews
    24: Standard Gamut: Dell U2412 and HP ZR2440.
    27" Standard Gamut: Samsung S27A850D and Apple Cinema- The Samsung uses PLS technology versus IPS while the Apple is a glossy screen that will work with a pc.
    Sorry for the long post. Any comments are greatly appreciated.

    dkg62 wrote:
    I realize the whole chain must be 10 bit
    Not trying to talk you out of setting up a 10 bit pipeline, but it's still not very mature, and it really isn't a necessity to get a good editing experience.
    Personally I find advantage in using two 4:3 ratio monitors for Photoshop work.  All my panels are on the right monitor, while pretty much the entire left one shows the Photoshop main window and the working canvas space.  My desktop is 3200 x 1200 pixels overall, and I find having the panels remain visible all the time is important.
    Regarding whether a wide gamut is important...  Will you be printing to devices that deliver a wide gamut?  What other things will you be doing with your system?
    It's not a no-brainer whether a wider gamut monitor is always "better" for everything, since it can accentuate the differences between the output from color-managed and non-color-managed applications, and it's definitely true that not everything is color-managed.  With a monitor that's close to sRGB, for example, you might find Internet Explorer output acceptable, while using a wide gamut monitor will result in garishly oversaturated IE displays.  On the other hand, FireFox (with a settings tweak) seems to get color management right, so there is an alternative.
    I think, as John has implied above, you should work to get your head completely around how color-management works, soup to nuts.  If you don't, there will always be things that are a mystery or which surprise you at the wrong times.  Being able to order a print and have it come back with the expected color can be very important, as you might imagine.
    -Noel

  • Need extra storage for photos for my ipad ...

    I need extra storage for my ipad to store photos on ... I have so far been looking at the Airport Time Capsule & Seagate Wireless Plus.
    Can anyone recommend any? Thanks

    If you need to offload photos as you have too many, the best way is to plug the iPad into you computer running Mac OSX and dump them into iphoto.
    If you want to use something by wireless, without a computer then any network connected hard disk will work much the same. You cannot use file storage directly anyway.. you need to load a file app to start with.
    I think use whichever works out the cheaper for you.
    Do note the TC is really not designed to do this job and if you already use the TC for Time Machine it is messy loading files onto it. This is apparently a new purchase so you are not using the TC at all..
    The TC lacks a method to back itself up.. And this is one of its great weaknesses.. if the TC fails.. and they all fail at some point. How are you going to recover those photos?? From iPad you will not have the tools needed to do backups of the TC to another location.
    I have no idea if the seagate has built in proper backup but I would find out.

  • My ipad is not being seen by itunes in Windows 7. I uninstalled then reinstalled itunes it started working for a while then it stopped. I get a message stating that the device is not recognized or the device is defective replace device. Anyone have a fix.

    My ipad is not being seen by itunes in Windows 7. I uninstalled then reinstalled itunes it started working for a while then it stopped. I get a message stating that the device is not recognized or the device is defective replace device. Anyone have a fix.

    At present I have no power to the Gen 7, so need to get some power to it I think.  I pressed the buttons as you suggested, but nothing is showing up at this point.  Thank you for your response as the more I can rule out before  I take it back the better I think.

  • HT3775 I NEED I TUNES FOR A 64 BIT PC. OPERATING SYSTEM IS WINDOWS 8, NON TOUCH SCREEN. WHICH IS THE ABSOLUTELY BEST WAY TO GET ITUNES OPERATING CORRECTLY ON MY PC????//I HAVE TRIED SEVERAL THINGS, NONE OF WHICH ARE WORKING. IS ITUNES DELIBERATELY EXCLUDI

    I cannot get itunes to work/install on myPC. I am running windows 8 in a 64 bit machine. I also want to purchase books via itunes for my Nook. Are you deliberately excluding PC owners so we cannot use ituens on our computers???? I have selected a community but have no idea what community I should be working with. Can somone explai these communities to me? Also. you don't allow much time to go thru the sign up process. I had to start over SEVERAL times as you kept timing me out. Jesus...when people are signing up for the first time, we have no idea of the questions that will be asked. Give us a break and give us time to sign up. Not everone is disability free and able to go thru your process quickly...you are NOT user friendly. You should be for people who are wanting to join your community. I used to want an Apple product but now that  I have had first hand experience with your web page, I think I will probably stay away from Apple products. VERY DISAPPOINTING

    Jan 11, 2014 10:26 AM  Re: I NEED I TUNES FOR A 64 BIT PC. OPERATING SYSTEM IS WINDOWS 8, NON TOUCH SCREEN. WHICH IS THE ABSOLUTELY BEST WAY TO GET ITUNES OPERATING CORRECTLY ON MY PC????//I HAVE TRIED SEVERAL THINGS, NONE OF WHICH ARE WORKING. IS ITUNES DELIBERATELY EXCLUDING
      Re: I NEED I TUNES FOR A 64 BIT PC. OPERATING SYSTEM IS WINDOWS 8, NON TOUCH SCREEN. WHICH IS THE ABSOLUTELY BEST WAY TO GET ITUNES OPERATING CORRECTLY ON MY PC????//I HAVE TRIED SEVERAL THINGS, NONE OF WHICH ARE WORKING. IS ITUNES DELIBERATELY EXCLUDING PC'S  in response to Birdlover1      
    Post over in the iTunes for Windows forum, here:
    https://discussions.apple.com/community/itunes/itunes_for_windows
    sebastian

  • Need a code for finding prime no.s from 0 to 100.

    Hi,
    i need a code for finding prime no.s from 0 to 100.
    Please help me out.
    Regards,
    Santosh Kotra.

    hai santosh,
    here is an example program to find the prime number...........
    EXAMPLE:
    DATA: BEGIN OF primes OCCURS 0,
            number TYPE i,
            exp    TYPE i,
          END OF primes.
    DATA: w_mult TYPE i,
          w_limi TYPE i,
          w_prem TYPE i.
    DATA: w_outp TYPE text132.
    DATA: w_rtime TYPE i,
          w_stime TYPE p DECIMALS 3.
    DEFINE add_part.
      sy-fdpos = strlen( &1 ) + 1.
      &1+sy-fdpos(*) = &2.
      condense &1.
    END-OF-DEFINITION.
    PARAMETERS: p_numb TYPE i,                "number to check
                p_fact TYPE c AS CHECKBOX,    "display components
                p_nbpr TYPE c AS CHECKBOX.    "nb of primes
    START-OF-SELECTION.
      GET RUN TIME FIELD w_rtime.
      IF p_nbpr IS INITIAL OR p_numb LE 12000.
        PERFORM eratostene USING p_numb.
        add_part w_outp p_numb.
        READ TABLE primes WITH KEY number = p_numb.
        IF sy-subrc = 0.
          add_part w_outp 'is prime'.
        ELSE.
          IF p_fact IS INITIAL.
            add_part w_outp 'is not prime'.
          ELSE.
            add_part w_outp '='.
            w_limi = p_numb.
            LOOP AT primes WHERE exp GT 0.
              CHECK primes-number LE w_limi.
              IF w_prem GT 0.
                add_part w_outp '*'.
              ENDIF.
              IF primes-exp GT 1.
                add_part w_outp '('.
                add_part w_outp primes-number.
                add_part w_outp '^'.
                add_part w_outp primes-exp.
                add_part w_outp ')'.
              ELSE.
                add_part w_outp primes-number.
              ENDIF.
              w_limi = w_limi / ( primes-number ** primes-exp ).
              IF w_limi = 1.
                EXIT.
              ENDIF.
              w_prem = 1.
            ENDLOOP.
          ENDIF.
        ENDIF.
        WRITE: / w_outp.
        IF NOT p_nbpr IS INITIAL.
          DESCRIBE TABLE primes LINES sy-tmaxl.
          CLEAR: w_outp.
          add_part w_outp 'Number of primes:'.
          add_part w_outp sy-tmaxl.
          WRITE: / w_outp.
          SKIP.
          LOOP AT primes.
            WRITE: / primes-number.
          ENDLOOP.
        ENDIF.
      ELSE.
        PERFORM factors.
      ENDIF.
      GET RUN TIME FIELD w_rtime.
      w_stime = w_rtime / 1000000.
      SKIP.
      CLEAR: w_outp.
      add_part w_outp 'Calculation time:'.
      add_part w_outp w_stime.
      WRITE: / w_outp.
          FORM eratostene                                               *
    FORM eratostene USING in_number TYPE i.
      DATA: BEGIN OF no_primes OCCURS 0,
              number TYPE i,
            END OF no_primes.
      DATA: cnum TYPE i,
            dnum TYPE i,
            limi TYPE i,
            mult TYPE i,
            puis TYPE i,
            cmod TYPE i.
      IF NOT ( p_fact IS INITIAL AND p_nbpr IS INITIAL ).
        limi = in_number.
      ELSE.
        limi = sqrt( in_number ).
      ENDIF.
      cnum = 2.
      WHILE cnum LE limi.
        READ TABLE no_primes WITH KEY number = cnum.
        IF sy-subrc NE 0.
          primes-number = cnum.
          mult = 2.
          puis = 1.
          dnum = mult * cnum.
          WHILE dnum LE in_number.
            READ TABLE no_primes WITH KEY number = dnum.
            IF sy-subrc NE 0.
              no_primes-number = dnum.
              APPEND no_primes.
            ENDIF.
            IF NOT p_fact IS INITIAL.
              cmod = dnum MOD ( cnum ** puis ).
              IF cmod = 0.
                cmod = in_number MOD ( cnum ** puis ).
                IF cmod = 0.
                  primes-exp = puis.
                  puis = puis + 1.
                ENDIF.
              ENDIF.
            ENDIF.
            mult = mult + 1.
            dnum = mult * cnum.
          ENDWHILE.
          APPEND primes.
          CLEAR: primes.
        ENDIF.
        cnum = cnum + 1.
      ENDWHILE.
    ENDFORM.
          FORM factors                                                  *
    FORM factors.
      DATA: ex_factors TYPE string,
            mod        TYPE i,
            still      TYPE f,
            factor     TYPE i,
            exponent   TYPE i,
            square     TYPE f,
            fac_string TYPE text40,
            exp_string TYPE text40.
      IF p_numb LE 3.
        ex_factors = p_numb.
      ELSE.
        factor = 2.
        still  = p_numb.
        DO.
          CLEAR: exponent.
          mod = still MOD factor.
          WHILE mod = 0.
            exponent = exponent + 1.
            still    = still div factor.
            mod      = still MOD factor.
          ENDWHILE.
          IF exponent EQ 1.
            fac_string = factor.
            CONCATENATE ex_factors '*'  fac_string
                                   INTO ex_factors
                           SEPARATED BY space.
            CONDENSE ex_factors.
          ELSEIF exponent GT 1.
            fac_string = factor.
            exp_string = exponent.
            CONCATENATE ex_factors '* (' fac_string
                                   '^'   exp_string ')'
                                   INTO  ex_factors
                           SEPARATED BY space.
            CONDENSE ex_factors.
          ENDIF.
          factor = factor + 1.
          square = factor ** 2.
          IF square GT still.
            EXIT.
          ENDIF.
        ENDDO.
        IF still GT 1.
          CATCH SYSTEM-EXCEPTIONS convt_overflow = 1.
            fac_string = factor = still.
          ENDCATCH.
          IF sy-subrc NE 0.
            fac_string = still.
          ENDIF.
          CONCATENATE ex_factors '*' fac_string
                                INTO ex_factors
                        SEPARATED BY space.
          CONDENSE ex_factors.
        ENDIF.
        SHIFT ex_factors UP TO '*'.
        SHIFT ex_factors BY 2 PLACES.
      ENDIF.
      WRITE: / p_numb RIGHT-JUSTIFIED.
      IF ex_factors CA '*^'.
        WRITE: '=', ex_factors.
      ELSE.
        WRITE: 'is prime'.
      ENDIF.
    ENDFORM.
    HOPE THIS WILL BE HELPFULL.
    regards
    praba.

  • Need a hint for home office / 871 does not support port-security - FPM ?

    Hi,
    i want to realize the following setup:
    - Central Site 871 with Internet Connection and static IP
    - Home office 871 with Internet Connection and static IP. On that home office router, there should be 2 Vlans: 1 for the office work and one for the user's private PC. All Traffic from the "office" Vlan is being put into a VPN to the central site. All Traffic on the other interface is being natted and goes straight to the internet.
    To minimize security issues, i tried to configure port-security, so that the user cannot connect with his private PC to the office LAN ports and vice versa. Unfortunately, port-security seems not to be supported on the 871 (advanced ip services image).
    Now i looked for an alternative...and came over to FPM (flexible packet matching).
    If i understood right, you can classify packets for example by their source MAC address and if this field matches a specific value (the mac of the work pc), packets can be dropped by a policy.
    Of course i cannot avoid that the user connects the work pc together with his private pc (this is then related to the OS Security to keep out viruses, worms, trojans, etc). But i could/want to restrict the internet access with the work pc through "normal" Internet access - the users should not be able to do that (must use the company's proxy).
    I did the follwing config:
    class-map type access-control match-any c2
    match start l2-start offset 48 size 6 regex "0xabcd1234fedc"
    match field ETHER source-mac regex "abcd1234fedc"
    policy-map type access-control p2
    class c2
    drop
    interface Vlan1
    ip address 192.168.20.1 255.255.255.0
    ip nat inside
    ip virtual-reassembly
    service-policy type access-control input p2
    service-policy type access-control output p2
    As this feature is quite new, i'm not familiar with it's syntax.
    I also tried to use "string" instead of regexp, but i'm still able to connect the office pc to the private Lan and i am able to access the "Internet" (currently it's only setup in a lab).
    As i understood so far, the offset is the value in bits, and size is in bytes. is that correct?
    Has anyone yet some experience with FPM or maybe any hint for me how to realize the requested setup with the 871 routers?
    bets regards,
    Andy

    For the FPM feature to work you will need PHDF files for the protocols you want to scan for to be loaded on your routers. The files can be downloaded from cisco's website. In your case you will have to download ether.phdf file.

  • Help with starting point for "proof of concept" integration

    We are a third party application provider and are attempting to figure out how to do a "proof of concept" integration with SAP.  We are not looking for "certification".  Our product does not appear to fit any of the standard certifications for integration and our experience integrating with other systems indicates that no two integration will be identical.
    We are looking to do a simple integration scenario with an SAP system so we have some basic experience doing it, can say 'Yes" when asked if we have done it, and can create a video showing a transaction being done in SAP and our system also updating (and ideally the reverse).
    Our starting point with respect to SAP knowledge is "0".
    Our basic task list (we think) goes something like
    1.  Figure out the version and modules of SAP with which we should be integrating
    2.  Get access to an SAP system (do we rent, is there a developer/evaluation, ...)
    3.  Put some data in the test system (is there a "sample data" set?)
    4.  Figure out the SAP transactions that map to the business process in which we are interested (moving goods in and out of a distribution center/ware house - are there some "standard business process guides")
    5.  Integrate (we are a .NET web based application so we are guessing this means use the ".Net Connector")
    Could anyone point out any resources (white papers, links, people, places to find people,...) that might be a good starting point?
    Thanks,
    John

    Athol,
    We are looking to recieve notifications out of SAP as tractor trailers at a dock are filled as proof on concept.  The actual integration scenarios we do are more complex and do not match well with any of the pre-packaged certification scenarios.  The real world integration scenarios actual vary substantially from customer to customer in terms of the integration points between systems.
    As we have become more marginally knowledgable about SAP, I think we will end up receiving and sending "IDOC" messages from SAP but have no idea what those IDOC messages are or where to start looking for what a "standard" (if there is one) message SAP would generate in reaction to whatever the "trailer is loaded" transaction is.
    To figure out what the transaction is, I assume we need to identify what version of SAP we should be targeting for a simple integration.  Are there any could references on what the commonly integration methods are and to which versions they apply?
    Something like "hey, if you do an integration with a IDOCs in with SAP Netweaver 2004 then that would good proof you could integrate with 90% of the installed SAP base".  Of course, any links explaining what the versions of SAP are and where they are in there lifecycle and what people are actually using would be helpful.
    John

  • Analog start trigger for x series card gives an error?

    Hi everyone,
    I am having some trouble setting up an analog start trigger for DAQ using an x series PCIe card (6351)... Attached is my configuration... After reading the manual (http://digital.ni.com/manuals.nsf/websearch/08B4B2E1B5373B94862579BA006E6BAB), my understanding is that AFPI0 is a compatable analog trigger for the device; however, the vi will not run and I get an error... Although if I change the soruce to "Force" (which is ai0) it works..
    Also, the device document says (pg 11-8):
    "To improve trigger accuracy, do the following:
    • Use an AI channel (with a small input range) instead of APFI <0,1> as your trigger source. The DAQ device does not amplify the APFI <0, 1> signals. When using an AI channel, the NI-PGIA amplifies the AI channel signal before driving the analog trigger circuitry. If you configure the AI channel to have a small input range,"
    To me, this implies that I probably should use "Force" as the trigger soruce anyway (note that the instrunment is used to acquire data load cell data generated from human muscle contractions; so slew rates are relatively low compared to signals acquired from industrial tests).
    Could someone please comment on these issues for me?
    Regards,
    Jack
    LV2010
    Attachments:
    Untitled 1.vi ‏22 KB

    Ok... I think I have answered by own question... APFI0 needs a low impedence signal to drive the terminal... I mistakenly thought this was an internal terminal or trigger...
    So I should stick with using the first analog signal acquired in my DAQ device (e.g. ai0) as the trigger source?
    Regards,
    Jack
    LV2010

  • As soon as I keep the iPhone (iPhone 5) on the desk the network goes off and when I swipe it then only it starts searching for the network and get it in 30 seconds.  If someone is calling me during that time it says mobile is either switched off or outsid

    As soon as I keep the iPhone (iPhone 5) on the desk the network goes off and when I swipe it then only it starts searching for the network and get it in 30 seconds.
    If someone is calling me during that time it says mobile is either switched off or outside the coverage area.
    Please help

    You may need to force it into recovery mode. See here: https://discussions.apple.com/message/17766427#17766427

  • When updating Itunes I keep getting an error messge mobile device failed to start check for sufficient privileges

    I need help upgrading Itunes.I keep getting an error message that says
    Mobile device failed to start check for sufficient privileges.I am running windows 8

    Same here - did the latest iTunes update and boy am I glad I did that; haven't been able to run iTunes since. Have re-installed after uninstalling as per one of the other help pages, re-booting, and now instead of getting the above error message I get one that says Apple Application support not found. Please uninstall then reinstall. Apple error 2.
    Not thanks - Apple, you might want to do something about this I'm guessing since I'm no longer able to use iTunes thanks to your update?

  • Start up for PSE 8

    I have inserted the disc and after some time of working and reading, my
    computer does nothing and does not prompt to instal.  After which
    I try to run the disc and it says there is no disc?

    it meets the specs but i think we will purchase a laptop and have the software loaded to that device as i don't see any way to add it to my main computer other than downloading it.  Thanks for your help.
    Date: Tue, 29 Dec 2009 17:32:03 -0700
    From: [email protected]
    To: [email protected]
    Subject: start up for PSE 8
    I can't watch movies on it
    Not that it is too old, exactly, but it sounds like you don't have a dvd reading drive (almost all computers made in the past several years have a drive that can read dvds, whether or not it can write to them). You will need to find another way to do this. Are you sure your computer meets the specs otherwise?
    >

Maybe you are looking for