Need step-by-step guide on how to connect Leopard and Vista
Hi,
I have a desktop mac with Leopard and a PC notebook with VISTA. The Leopard has 2 network connections, the first is connected to my DSL router, the second is connected to the VISTA notebook.
What do I need to do to be able to:
1) share the Internet connection
2) access files from VISTA and Leopard?
Could you explain it as if you would to a 10-year old please? I'm really having trouble with this.
Ok. There are two ways to approach this.
1. Buy a router, and connect both machines to the router. File sharing will be a breeze, and Internet Connection Sharing (ICS) won't be necessary.
2. Attempt to connect the machines to each other via ICS. I suspect that File Sharing will not work well in this configuration, but we can test that after trying.
_*Choice 1. Buy a router*_ ($50-$60 in Australia for a Wireless G router with 4 ethernet ports)
Plug the router into the ZyXEL modem.
Configure the router to connect.
Plug both Mac's into the router.
File sharing will work as soon as you enable it on both Macs (and in Vista).
_*Choice 2. Use ICS*_
The trick here is that you are using two Ethernet connections on your PowerMac. I have used ICS for an Ethernet connected computer sharing via Airport, but never with both. (Do you have an Airport card in your PowerMac?)
There are risks to using an Ethernet connection at both ends of the configuration (it can muck around with some ISPs networks!).
Here goes:
1. Disconnect the two computers.
2. Open System Preferences on the PowerMac and click on sharing. Then click on Internet Sharing.
3. "Share your computer using:" Select built-in Ethernet
4. "To computers using:" Select Ethernet.
5. Reconnect the two computers.
On your MacBook:
1. Start with Leopard, and open System Preferences -> Network. What do you see?
2. Can you browse the net? If this works, then it should work for Vista too.
3. Can you see the PowerMac on the SHARED devices in a Finder window?
3. Restart into Vista. The network should work immediately.
Report back! If we have managed to get this far, then we will have a go at the file sharing.
Message was edited by: RodneyW
Similar Messages
-
I have Mac OS X version 10.5.8 and so im wondering what is the next step i need to get. i have tried to get snow leopard and other things and not having any lukck . can any one help me out pls.
If your Mac meets these requirements:
http://support.apple.com/kb/SP575
then you can order a Snow Leopard disk and install it.
http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
Ciao. -
Can any guide me how to gather requirements and what r the approaches!
HI
Can any guide me how to gather requirements and what r the approaches and documents.
Regards
VSMModeling approach:
Top down - Try and find out what kind of reports the users need. Based o that you can determine your granularity of data.
Have to find out what the sources are. Then decide if you have standard content or if you need to enhance or develop new objects.
Try and see if standard reports are enough.
If they ned aggregated data, decide on cubes. Then decide what all business areas the reports encompass. Based on that u can decide to build multiproviders or infosets depending on requirement.
try to incorporate all the keyfigures and characteristics in your data model.
then decide how many layer ODS's you might need.
then come up with a data model accordingly. -
i bough a new imac, this haven't dvd burner, i bought a external dvd burner but the imac havent a idvd and i need this program, no other one, how to download this and install?
Hi
how to download this and install?
There are no free DownLoads !
There are no legal DownLoads at all !
If there is no iDVD on Your Mac (and it's not on newer Macs as Apple discarded it) then You need a program that can do this.
Your Mac can burn CDs and DVDs - BUT DVD as Data-DVDs not as Video-DVDs - they need a program to be encoded and STRUCTURED as such.
• iDVD is part of the boxed version of iLife'11 and can only be bought outside Apple as on Amazon and e-bay
• DVD Studio pro - Part of FinalCut Studio Pro bundle - this to has expired and can only be bought second handed. (High price and tough learning Curve - but best ever done.)
• Roxio Toast™ - Not as elegant as iDVD - but has many other positive additions (I like it as 10-Pro incl BD-component) (now version 11)
• Burn - only free alternative I know of on internet. Very simple - Just for doing a plain Video-DVD
Burn http://www.digital-digest.com/software/Burn.html
only You can buy from Apple is
• FinalCut Pro-X which also can burn to DVD but without any nice themes.
AppleMan1958
You can also buy Compressor from Apple for $50 US. It will also create DVD and BluRay but without the nice themes.
Yours Bengt W -
How to connect "Next" and "Previous" ?
Hi everyone,
I am new in this with videoediting etc but I just managed to finish my first real videoproject and burned a DVD last night.
My first Encore project crashed after 3 days but I could start a new project and finish that one within 4 hours. Great program.
The DVD works fine except for1 thing:
I could not figure out how to connect "Next" and "Previous" in my Submenu for choosing clips.
So I just deleted these functions (!)
Looking forward to next project but I would like to use these 2 functions!
Thanks in advance!
Great forums in Adobe with Great People!Thank you !
I thought it was to go to Next clip and previous clip. Not very good thinking.....
Now I understand!
Thanks again! -
How to connect Java and Microsoft SQL Server 2000
hi,
could anyone please teach me how to connect Java and SQL Sever 2000?? if possible could you guys provide me with an example??? i could hardly find any relevant resources about it...
Thanks ~!thanks for the information...
by the way hv any working module on it?? i'm new to
both Java and Microsoft SQL Server... Thanks againFirst things first... you should read this:
http://java.sun.com/docs/books/tutorial/jdbc/
This is microsofts official JDBC Driver: http://www.microsoft.com/sql/downloads/jdbcregister.asp
Install it and the documentation has some usage examples -
How to format Leopard and keep Music, Docs, Photos, Movies, and Contacts
I've recently acquired a macbook. I'm very familiar with PCs and I have recently converted.
I used to format my PCs every 10 months or so to keep them healthy and keep the clutter of stuff away. The file structures and everything is different with macs and Leopard especially is different. I want to know what would be required of me to do the equivalent of a PC formatting on a mac. And how often do they have to be done on Macs anyway? I'm guessing it's about the same as it is for PCs, around 10 months or so?
On my PC I'd just copy the My Documents folder, my iTunes, My Pictures folder, Microsoft Outlook (I'd make a backup and restore it after the format), and My Videos. I'd copy all these onto an external hard drive and then drop them all back onto my PC after the format.
What is the equivalent procedure on a Macbook with Leopard? I have Time Machine with Time Capsule, if that makes a difference. But I heard that Leopard has it's own ways of formatting when you want to format? What are my options in terms of achieving the same sort of end product? Namely, getting rid of the clutter that accumulates on computers over time, and then restoring all my documents and media files back to the computer after the format.
Thanks for the help. I'm glad I'm on a Mac now, but this is the one thing I haven't been able to figure out.Extended Hard Drive Preparation
1. Open Disk Utility in your Utilities folder. If you need to reformat your startup volume, then you must boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger or Leopard.)
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Click on the Options button, set the partition scheme to GUID (only required for Intel Macs) then click on the OK button. Set the number of partitions from the dropdown menu (use 1 partition unless you wish to make more.) Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the volume(s) mount on the Desktop.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
Steps 4-6 are optional but should be used on a drive that has never been formatted before, if the format type is not Mac OS Extended, if the partition scheme has been changed, or if a different operating system (not OS X) has been installed on the drive.
Although the above is the procedure there's no reason to ever reformat the drive unless the drive or system files have been corrupted beyond repair.
You can easily create a bootable clone of your system on an external Firewire drive. If you ever need to replace the system you can simply restore it from the clone. Using backup software the clone can even be kept current with incremental updates. This whole process can be automated via backup schedules provided the backup software supports scheduling (most decent ones do.) Individual files or folders can also be selectively restored from the backup.
Basic Backup
Get an external Firewire drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
1. Retrospect Desktop (Commercial - not yet universal binary)
2. Synchronize! Pro X (Commercial)
3. Synk (Backup, Standard, or Pro)
4. Deja Vu (Shareware)
5. Carbon Copy Cloner (Donationware)
6. SuperDuper! (Commercial)
7. Intego Personal Backup (Commercial)
8. Data Backup (Commercial)
The following utilities can also be used for backup, but cannot create bootable clones:
1. Backup (requires a .Mac account with Apple both to get the software and to use it.)
2. Toast
3. Impression
4. arRSync
Apple's Backup is a full backup tool capable of also backing up across multiple media such as CD/DVD. However, it cannot create bootable backups. It is primarily an "archiving" utility as are the other two.
Impression and Toast are disk image based backups, only. Particularly useful if you need to backup to CD/DVD across multiple media.
Also read How to Back Up and Restore Your Files.
Although you can buy a complete FireWire drive system, you can also put one together if you are so inclined. It's relatively easy and only requires a Phillips head screwdriver (typically.) You can purchase hard drives separately. This gives you an opportunity to shop for the best prices on a hard drive of your choice. Reliable brands include Seagate, Hitachi, Western Digital, Toshiba, and Fujitsu. You can find reviews and benchmarks on many drives at Storage Review.
Enclosures for FireWire and USB are readily available. You can find only FireWire enclosures, only USB enclosures, and enclosures that feature multiple ports. I would stress getting enclosures that use the Oxford chipsets (911, 921, 922, for example.) You can find enclosures at places such as;
Cool Drives
OWC
WiebeTech
Firewire Direct
California Drives
NewEgg
All you need do is remove a case cover, mount the hard drive in the enclosure and connect the cables, then re-attach the case cover. Usually the only tool required is a small or medium Phillips screwdriver.
Kappy's Personal Suggestions for OS X Maintenance
For disk repairs use Disk Utility. For situations DU cannot handle the best third-party utilities are: Disk Warrior; DW only fixes problems with the disk directory, but most disk problems are caused by directory corruption; Disk Warrior 4.x is now Intel Mac compatible. TechTool Pro provides additional repair options including file repair and recovery, system diagnostics, and disk defragmentation. TechTool Pro 4.5.1 or higher are Intel Mac compatible; Drive Genius is similar to TechTool Pro in terms of the various repair services provided. Versions 1.5.1 or later are Intel Mac compatible.
OS X performs certain maintenance functions that are scheduled to occur on a daily, weekly, or monthly period. The maintenance scripts run in the early AM only if the computer is turned on 24/7 (no sleep.) If this isn't the case, then an excellent solution is to download and install a shareware utility such as Macaroni, JAW PseudoAnacron, or Anacron that will automate the maintenance activity regardless of whether the computer is turned off or asleep. Dependence upon third-party utilities to run the periodic maintenance scripts had been significantly reduced in Tiger and Leopard.
OS X automatically defrags files less than 20 MBs in size, so unless you have a disk full of very large files there's little need for defragmenting the hard drive. As for virus protection there are few if any such animals affecting OS X. You can protect the computer easily using the freeware Open Source virus protection software ClamXAV. Personally I would avoid most commercial anti-virus software because of their potential for causing problems.
I would also recommend downloading the shareware utility TinkerTool System that you can use for periodic maintenance such as removing old logfiles and archives, clearing caches, etc.
For emergency repairs install the freeware utility Applejack. If you cannot start up in OS X, you may be able to start in single-user mode from which you can run Applejack to do a whole set of repair and maintenance routines from the commandline. Note that presently AppleJack is not compatible with Leopard.
When you install any new system software or updates be sure to repair the hard drive and permissions beforehand. I also recommend booting into safe mode before doing system software updates.
Get an external Firewire drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
1. Retrospect Desktop (Commercial - not yet universal binary)
2. Synchronize! Pro X (Commercial)
3. Synk (Backup, Standard, or Pro)
4. Deja Vu (Shareware)
5. Carbon Copy Cloner (Donationware)
6. SuperDuper! (Commercial)
7. Intego Personal Backup (Commercial)
8. Data Backup (Commercial)
The following utilities can also be used for backup, but cannot create bootable clones:
1. Backup (requires a .Mac account with Apple both to get the software and to use it.)
2. Toast
3. Impression
4. arRSync
Apple's Backup is a full backup tool capable of also backing up across multiple media such as CD/DVD. However, it cannot create bootable backups. It is primarily an "archiving" utility as are the other two.
Impression and Toast are disk image based backups, only. Particularly useful if you need to backup to CD/DVD across multiple media.
Visit The XLab FAQs and read the FAQs on maintenance, optimization, virus protection, and backup and restore.
Additional suggestions will be found in Mac Maintenance Quick Assist.
Referenced software can be found at www.versiontracker.com and www.macupdate.com. -
How to connect ORACLE8i and xml
this is sethu involving in the effort to do a project in xml and oracle 8i in the environment of weblogic.
i need how to connect oracle8i using xml
which enable me to start my project.
with regards
sethu
email:[email protected]
nullI agree with the rest of you folks. JDOM will be your best bet for integration. I am currently using JDOM to parse and/or create xml documents. As mentioned the tutorials are very good to check out. If you just want to hit the JDOM highlights and hit the ground running check out this link. http://www.jdom.org/downloads/docs.html
Take some time to check out the first 3 links on that page. They are JDOM and XML Parsing, Part 1, Part 2, and Part 3. Very good information about JDOM and XML parsing.
Hope some of this will help! -
How to connect WRT54GX and WAP54G
Hi,
I am using WRT54GX router and WAP54G access point in same floor. Could you please let me know how to connect access point with router? Kindly provide setting.
Thanks!
GauravHi, first connect one of your Pc to the router and log into the setup page of the router with http://192.168.1.1 . The username is blank and the password is admin. Under the wireless tab make a note of the ssid, wireless channel and under the wireless security page also make a note of the wep keys if you have provided any. Then click on the status tab and under the status tab you can click on the Local Network and note the Mac Address mentioned on this screen You can then connect the wap54g to the router and log into the setup page o the access point by http://192.168.1.245 . The username is blank and the password is admin. On the wireless screen you can change the ssid, the channel and the wep encryption accordingly.
Then on the setup screen you can click on the AP Mode and select the mode as Wireless Repeater an punch the Mac Address and then click on save settings. You can then unplug the access point from the router in order to get it working wirelessly. -
How to connect Iphone4s and Ipad2 through bluetooth
How to connect Iphone 4s and Ipad2 through bluetooth normally as we do for some general phone
you can only connect your iPhone 4S and iPad2 for the purpose of tethering your iPhone's internet connection to the iPad. Any other connection is not supported.
-
How to connect documents and icloud ?
How do i connect documents and icloud?
You can store iWorks docs on iCloud, but you cannot share them with others. The old iWorks beta web site let you host files for other remote users to have access to them, and iCloud (at least not now) does not allow that.
-
How to connect mysql and oracle 10g by UTL_HTTP?
how to connect mysql 5.0 and oracle 10g r2 by UTL_HTTP?what to do for this url connection exactly?
cant i change anything to stup a link?
SQL> desc utl_http
PROCEDURE ADD_COOKIES
Argument Name Type In/Out Default?
COOKIES TABLE OF RECORD IN
FUNCTION BEGIN_REQUEST RETURNS RECORD
Argument Name Type In/Out Default?
URL VARCHAR2(32767) OUT
METHOD VARCHAR2(64) OUT
HTTP_VERSION VARCHAR2(64) OUT
PRIVATE_HNDL BINARY_INTEGER OUT
URL VARCHAR2 IN
METHOD VARCHAR2 IN DEFAULT
HTTP_VERSION VARCHAR2 IN DEFAULT
PROCEDURE CLEAR_COOKIES
PROCEDURE CLOSE_PERSISTENT_CONN
Argument Name Type In/Out Default?
CONN RECORD IN
HOST VARCHAR2(256) IN
PORT BINARY_INTEGER IN
PROXY_HOST VARCHAR2(256) IN
PROXY_PORT BINARY_INTEGER IN
SSL BOOLEAN IN
PROCEDURE CLOSE_PERSISTENT_CONNS
Argument Name Type In/Out Default?
HOST VARCHAR2 IN DEFAULT
PORT BINARY_INTEGER IN DEFAULT
PROXY_HOST VARCHAR2 IN DEFAULT
PROXY_PORT BINARY_INTEGER IN DEFAULT
SSL BOOLEAN IN DEFAULT
PROCEDURE END_REQUEST
Argument Name Type In/Out Default?
R RECORD IN/OUT
URL VARCHAR2(32767) IN/OUT
METHOD VARCHAR2(64) IN/OUT
HTTP_VERSION VARCHAR2(64) IN/OUT
PRIVATE_HNDL BINARY_INTEGER IN/OUT
PROCEDURE END_RESPONSE
Argument Name Type In/Out Default?
R RECORD IN/OUT
STATUS_CODE BINARY_INTEGER IN/OUT
REASON_PHRASE VARCHAR2(256) IN/OUT
HTTP_VERSION VARCHAR2(64) IN/OUT
PRIVATE_HNDL BINARY_INTEGER IN/OUT
PROCEDURE GET_AUTHENTICATION
Argument Name Type In/Out Default?
R RECORD IN/OUT
STATUS_CODE BINARY_INTEGER IN/OUT
REASON_PHRASE VARCHAR2(256) IN/OUT
HTTP_VERSION VARCHAR2(64) IN/OUT
PRIVATE_HNDL BINARY_INTEGER IN/OUT
SCHEME VARCHAR2 OUT
REALM VARCHAR2 OUT
FOR_PROXY BOOLEAN IN DEFAULT
PROCEDURE GET_BODY_CHARSET
Argument Name Type In/Out Default?
CHARSET VARCHAR2 OUT
FUNCTION GET_BODY_CHARSET RETURNS VARCHAR2
PROCEDURE GET_COOKIES
Argument Name Type In/Out Default?
COOKIES TABLE OF RECORD IN/OUT
FUNCTION GET_COOKIE_COUNT RETURNS BINARY_INTEGER
PROCEDURE GET_COOKIE_SUPPORT
Argument Name Type In/Out Default?
ENABLE BOOLEAN OUT
MAX_COOKIES BINARY_INTEGER OUT
MAX_COOKIES_PER_SITE BINARY_INTEGER OUT
PROCEDURE GET_DETAILED_EXCP_SUPPORT
Argument Name Type In/Out Default?
ENABLE BOOLEAN OUT
FUNCTION GET_DETAILED_SQLCODE RETURNS BINARY_INTEGER
FUNCTION GET_DETAILED_SQLERRM RETURNS VARCHAR2
PROCEDURE GET_FOLLOW_REDIRECT
Argument Name Type In/Out Default?
MAX_REDIRECTS BINARY_INTEGER OUT
PROCEDURE GET_HEADER
Argument Name Type In/Out Default?
R RECORD IN/OUT
STATUS_CODE BINARY_INTEGER IN/OUT
REASON_PHRASE VARCHAR2(256) IN/OUT
HTTP_VERSION VARCHAR2(64) IN/OUT
PRIVATE_HNDL BINARY_INTEGER IN/OUT
N BINARY_INTEGER IN
NAME VARCHAR2 OUT
VALUE VARCHAR2 OUT
PROCEDURE GET_HEADER_BY_NAME
Argument Name Type In/Out Default?
R RECORD IN/OUT
STATUS_CODE BINARY_INTEGER IN/OUT
REASON_PHRASE VARCHAR2(256) IN/OUT
HTTP_VERSION VARCHAR2(64) IN/OUT
PRIVATE_HNDL BINARY_INTEGER IN/OUT
NAME VARCHAR2 IN
VALUE VARCHAR2 OUT
N BINARY_INTEGER IN DEFAULT
FUNCTION GET_HEADER_COUNT RETURNS BINARY_INTEGER
Argument Name Type In/Out Default?
R RECORD IN/OUT
STATUS_CODE BINARY_INTEGER IN/OUT
REASON_PHRASE VARCHAR2(256) IN/OUT
HTTP_VERSION VARCHAR2(64) IN/OUT
PRIVATE_HNDL BINARY_INTEGER IN/OUT
PROCEDURE GET_PERSISTENT_CONNS
Argument Name Type In/Out Default?
CONNECTIONS TABLE OF RECORD IN/OUT
FUNCTION GET_PERSISTENT_CONN_COUNT RETURNS BINARY_INTEGER
PROCEDURE GET_PERSISTENT_CONN_SUPPORT
Argument Name Type In/Out Default?
ENABLE BOOLEAN OUT
MAX_CONNS BINARY_INTEGER OUT
PROCEDURE GET_PROXY
Argument Name Type In/Out Default?
PROXY VARCHAR2 OUT
NO_PROXY_DOMAINS VARCHAR2 OUT
FUNCTION GET_RESPONSE RETURNS RECORD
Argument Name Type In/Out Default?
STATUS_CODE BINARY_INTEGER OUT
REASON_PHRASE VARCHAR2(256) OUT
HTTP_VERSION VARCHAR2(64) OUT
PRIVATE_HNDL BINARY_INTEGER OUT
R RECORD IN/OUT
URL VARCHAR2(32767) IN/OUT
METHOD VARCHAR2(64) IN/OUT
HTTP_VERSION VARCHAR2(64) IN/OUT
PRIVATE_HNDL BINARY_INTEGER IN/OUT
RETURN_INFO_RESPONSE BOOLEAN IN DEFAULT
PROCEDURE GET_RESPONSE_ERROR_CHECK
Argument Name Type In/Out Default?
ENABLE BOOLEAN OUT
PROCEDURE GET_TRANSFER_TIMEOUT
Argument Name Type In/Out Default?
TIMEOUT BINARY_INTEGER OUT
PROCEDURE READ_LINE
Argument Name Type In/Out Default?
R RECORD IN/OUT
STATUS_CODE BINARY_INTEGER IN/OUT
REASON_PHRASE VARCHAR2(256) IN/OUT
HTTP_VERSION VARCHAR2(64) IN/OUT
PRIVATE_HNDL BINARY_INTEGER IN/OUT
DATA VARCHAR2 OUT
REMOVE_CRLF BOOLEAN IN DEFAULT
PROCEDURE READ_RAW
Argument Name Type In/Out Default?
R RECORD IN/OUT
STATUS_CODE BINARY_INTEGER IN/OUT
REASON_PHRASE VARCHAR2(256) IN/OUT
HTTP_VERSION VARCHAR2(64) IN/OUT
PRIVATE_HNDL BINARY_INTEGER IN/OUT
DATA RAW OUT
LEN BINARY_INTEGER IN DEFAULT
PROCEDURE READ_TEXT
Argument Name Type In/Out Default?
R RECORD IN/OUT
STATUS_CODE BINARY_INTEGER IN/OUT
REASON_PHRASE VARCHAR2(256) IN/OUT
HTTP_VERSION VARCHAR2(64) IN/OUT
PRIVATE_HNDL BINARY_INTEGER IN/OUT
DATA VARCHAR2 OUT
LEN BINARY_INTEGER IN DEFAULT
FUNCTION REQUEST RETURNS VARCHAR2
Argument Name Type In/Out Default?
URL VARCHAR2 IN
PROXY VARCHAR2 IN DEFAULT
WALLET_PATH VARCHAR2 IN DEFAULT
WALLET_PASSWORD VARCHAR2 IN DEFAULT
FUNCTION REQUEST_PIECES RETURNS TABLE OF VARCHAR2(2000)
Argument Name Type In/Out Default?
URL VARCHAR2 IN
MAX_PIECES BINARY_INTEGER IN DEFAULT
PROXY VARCHAR2 IN DEFAULT
WALLET_PATH VARCHAR2 IN DEFAULT
WALLET_PASSWORD VARCHAR2 IN DEFAULT
PROCEDURE SET_AUTHENTICATION
Argument Name Type In/Out Default?
R RECORD IN/OUT
URL VARCHAR2(32767) IN/OUT
METHOD VARCHAR2(64) IN/OUT
HTTP_VERSION VARCHAR2(64) IN/OUT
PRIVATE_HNDL BINARY_INTEGER IN/OUT
USERNAME VARCHAR2 IN
PASSWORD VARCHAR2 IN DEFAULT
SCHEME VARCHAR2 IN DEFAULT
FOR_PROXY BOOLEAN IN DEFAULT
PROCEDURE SET_BODY_CHARSET
Argument Name Type In/Out Default?
CHARSET VARCHAR2 IN DEFAULT
PROCEDURE SET_BODY_CHARSET
Argument Name Type In/Out Default?
R RECORD IN/OUT
URL VARCHAR2(32767) IN/OUT
METHOD VARCHAR2(64) IN/OUT
HTTP_VERSION VARCHAR2(64) IN/OUT
PRIVATE_HNDL BINARY_INTEGER IN/OUT
CHARSET VARCHAR2 IN DEFAULT
PROCEDURE SET_BODY_CHARSET
Argument Name Type In/Out Default?
R RECORD IN/OUT
STATUS_CODE BINARY_INTEGER IN/OUT
REASON_PHRASE VARCHAR2(256) IN/OUT
HTTP_VERSION VARCHAR2(64) IN/OUT
PRIVATE_HNDL BINARY_INTEGER IN/OUT
CHARSET VARCHAR2 IN DEFAULT
PROCEDURE SET_COOKIE_SUPPORT
Argument Name Type In/Out Default?
ENABLE BOOLEAN IN
MAX_COOKIES BINARY_INTEGER IN DEFAULT
MAX_COOKIES_PER_SITE BINARY_INTEGER IN DEFAULT
PROCEDURE SET_COOKIE_SUPPORT
Argument Name Type In/Out Default?
R RECORD IN/OUT
URL VARCHAR2(32767) IN/OUT
METHOD VARCHAR2(64) IN/OUT
HTTP_VERSION VARCHAR2(64) IN/OUT
PRIVATE_HNDL BINARY_INTEGER IN/OUT
ENABLE BOOLEAN IN DEFAULT
PROCEDURE SET_DETAILED_EXCP_SUPPORT
Argument Name Type In/Out Default?
ENABLE BOOLEAN IN DEFAULT
PROCEDURE SET_FOLLOW_REDIRECT
Argument Name Type In/Out Default?
MAX_REDIRECTS BINARY_INTEGER IN DEFAULT
PROCEDURE SET_FOLLOW_REDIRECT
Argument Name Type In/Out Default?
R RECORD IN/OUT
URL VARCHAR2(32767) IN/OUT
METHOD VARCHAR2(64) IN/OUT
HTTP_VERSION VARCHAR2(64) IN/OUT
PRIVATE_HNDL BINARY_INTEGER IN/OUT
MAX_REDIRECTS BINARY_INTEGER IN DEFAULT
PROCEDURE SET_HEADER
Argument Name Type In/Out Default?
R RECORD IN/OUT
URL VARCHAR2(32767) IN/OUT
METHOD VARCHAR2(64) IN/OUT
HTTP_VERSION VARCHAR2(64) IN/OUT
PRIVATE_HNDL BINARY_INTEGER IN/OUT
NAME VARCHAR2 IN
VALUE VARCHAR2 IN DEFAULT
PROCEDURE SET_PERSISTENT_CONN_SUPPORT
Argument Name Type In/Out Default?
ENABLE BOOLEAN IN
MAX_CONNS BINARY_INTEGER IN DEFAULT
PROCEDURE SET_PERSISTENT_CONN_SUPPORT
Argument Name Type In/Out Default?
R RECORD IN/OUT
URL VARCHAR2(32767) IN/OUT
METHOD VARCHAR2(64) IN/OUT
HTTP_VERSION VARCHAR2(64) IN/OUT
PRIVATE_HNDL BINARY_INTEGER IN/OUT
ENABLE BOOLEAN IN DEFAULT
PROCEDURE SET_PROXY
Argument Name Type In/Out Default?
PROXY VARCHAR2 IN
NO_PROXY_DOMAINS VARCHAR2 IN DEFAULT
PROCEDURE SET_RESPONSE_ERROR_CHECK
Argument Name Type In/Out Default?
ENABLE BOOLEAN IN DEFAULT
PROCEDURE SET_TRANSFER_TIMEOUT
Argument Name Type In/Out Default?
TIMEOUT BINARY_INTEGER IN DEFAULT
PROCEDURE SET_TRANSFER_TIMEOUT
Argument Name Type In/Out Default?
R RECORD IN/OUT
URL VARCHAR2(32767) IN/OUT
METHOD VARCHAR2(64) IN/OUT
HTTP_VERSION VARCHAR2(64) IN/OUT
PRIVATE_HNDL BINARY_INTEGER IN/OUT
TIMEOUT BINARY_INTEGER IN DEFAULT
PROCEDURE SET_WALLET
Argument Name Type In/Out Default?
PATH VARCHAR2 IN
PASSWORD VARCHAR2 IN DEFAULT
PROCEDURE WRITE_LINE
Argument Name Type In/Out Default?
R RECORD IN/OUT
URL VARCHAR2(32767) IN/OUT
METHOD VARCHAR2(64) IN/OUT
HTTP_VERSION VARCHAR2(64) IN/OUT
PRIVATE_HNDL BINARY_INTEGER IN/OUT
DATA VARCHAR2 IN
PROCEDURE WRITE_RAW
Argument Name Type In/Out Default?
R RECORD IN/OUT
URL VARCHAR2(32767) IN/OUT
METHOD VARCHAR2(64) IN/OUT
HTTP_VERSION VARCHAR2(64) IN/OUT
PRIVATE_HNDL BINARY_INTEGER IN/OUT
DATA RAW IN
PROCEDURE WRITE_TEXT
Argument Name Type In/Out Default?
R RECORD IN/OUT
URL VARCHAR2(32767) IN/OUT
METHOD VARCHAR2(64) IN/OUT
HTTP_VERSION VARCHAR2(64) IN/OUT
PRIVATE_HNDL BINARY_INTEGER IN/OUT
DATA VARCHAR2 IN -
How to Connect Wii and Xbox360 wirelessly with SBC Home Portal
Greetings. Need help on hardware to connect Wii and Xbox360 wirelessly to SBC Home portal modem. Distance between connect points are about 50 feet plus and separated by floors and walls. What would work to acheive the connection? Thanks in advance for the help.
SparrkyConfigure the X-BOX & WII using the wireless connection same as in wireless router .....
Check the connections status on both the devices & see if you are online or not .... -
For some reason my IPod nano 7th generation is not recognized by ITunes. It has recognized it up until today. I have followed every step that is provided for troubleshooting and nothing is working. Does anyone have any suggestions?
Hello sipsy12,
Thanks for using Apple Support Communities.
For more information, take a look at:
iPod nano not appearing in iTunes
http://www.apple.com/support/ipodnano/assistant/itunes/
iPod: Appears in Windows but not in iTunes
http://support.apple.com/kb/TS1363
Have a nice day,
Mario -
Its strange.. but I need to pay a data plan to connect in wifi network with Blackberry 8520? Its a joke or serious?
Hello musashibr,
The following article should provide you with more information on using services over Wi-Fi.
http://bbry.lv/rpW2Gj
Cheers,
-FB
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click "Accept as a Solution" for posts that have solved your issue(s)!
Maybe you are looking for
-
CALLER ID not working for International incoming calls
Hi, I've a strange issue where CALLER ID not working for International incoming calls, it shows INTERNATIONAL UNKNOWN NUMBER in the phone display, but the number shows correclty in Verizon Call assistant !!! Any clue?
-
Problems with Snow Leopard and users
I have upgraded 3 x 10.5 iMacs to 10.6. They have been working fine for the last 2 months, but now have some strange problems on the units. 1. On the one, it cannot save documents on the iMac under that user. If I create another user, then that new u
-
I'm completely new to Illustrator, and recently I've been getting into isometric drawings, however I'm experiencing a very frustrating problem with aligning objects to the grid. I'm trying to create a simple road made from small cubes, however whenev
-
VI Snippet Bug (IMAQ Image Vision Display with Property Node)
Colleagues, Just found small bug in LabVIEW - Creating snippet from selection with Vision Display together with Property node is not working (means that nothing happened - no save dialog appear): VI in attachment (VAS or VDM software required). Can s
-
public class Point2D { private int x, y; public Point2D() { x = 0; y = 0; } //public Point2D() { this(0,0); } public Point2D(int x, int y) {this.x = x; this.y = y;} public int getX() {return x;} public int getY() {return y;}