Need Steps for Configuring BI 7.0 with ECC 6

Hi All,
I need steps for configuring BI 7.0 with ECC 6, Please if anybody has material, Please share with me...
Regards,
Kiran Telkar

Hi,
regarding bi7 and ecc6.0 Configruration,pls chk this
https://www.sdn.sap.com/irj/sdn/developerareas/bi?rid=/webcontent/uuid/e78a5148-0701-0010-7da9-a6c721c6112e [original link is broken] [original link is broken] ...
http://sheffield.gumtree.com/sheffield/57/13455557.html
https://www.sdn.sap.com/irj/sdn/developerareas/bi?rid=/webcontent/uuid/e78a5148-0701-0010-7da9-a6c721c6112e [original link is broken] [original link is broken] ...
*pls assign points,if links useful*
regards,
CSM Reddy

Similar Messages

Need steps to configure BAM and DATAMART for Oracle BPM Enterprise

Hi,
Need steps to configure BAM and DATAMART for both Oracle BPM 10.3 Enterprise Standalone and Oracle BPM 10.3 Enterprise Weblogic.
Configurations like BAM Updater Service, Process Data Mart Updater Service, Start Up / Shut Down of the service etc.
I am referring : http://www.oracle.com/technology/products/bpm/bpm10gr3technicalarticles/BPMConfiguringAndTroubleshootingBAMAndDataMart.pdf

Hi,
To add system to solman:
Go to SMSY and define:
1) Server --> host name, IP etc
2) DB --> DB details
3) System --> R3, Netweaever etc, assign proper components, products
4) define and assign logical components for the system defined in step 3
5) generate RFC destionation to the satellite system
6) Provided you have the necessary trusted authorization and if the RFCs are generated successfully then your task is done. Else you'll have to troubleshoot.
Once this is done, you need to goto SOLUTION_MANAGER and define
1) new solution
2) make necessary inclusion in Solution Landscape Maintenance
3) include logical component
This completes the system setup for you.
For CCMS agent configuration, refer:
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/e2/eff640fa4b8631e10000000a1550b0/content.htm
For system monitoring using solman, refer:
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/0b/160419162a476380b5608e7f27a742/frameset.htm
Hope this helps.
Rajeev

Please help�. I need a steps for configuration

Dear All,
Plese help me.... I am new in StorEdge configuration.
Please give me the steps for configuration of Sun StorEdge 3310
Thanks

You didn't mention it yet, but ...
Have you gone through the manuals?
http://docs.sun.com/app/docs/coll/3310scsi-array*

Some steps for configuring Network are skipped in installation Solaris 10

Hi everybody !!!
I'm a newbie in Solaris 10. I had some problems in installation Solaris 10:
I downloaded installation packet for x64/x86 (DVD) on site Sun.I want to install Solaris 10 on my PC AMD 2500+.I connect to internet through a LAN.
1)In process installation, some steps for configuring Network ( from 5 to 15 in Solaris 10 installation guide) were skipped automatically. It has been directly moved to 16-th step(setup Time and region). Then i tried to finish installing it. But in working with it, i recognized that Network card had been not found( i use NVIDIA nForce MCP Networking Adapter). I typed some command in console shell :
$netstat -in
loo...........
and received only one row like above.
i have tried some times , but not succeeded
2)Port USB is also not working
Please help me. Thanks a lot !!!

hi Vantuan,
guess I just posted reply to your other post...
also check Sun hardware compatibility list for your network card here:
http://www.sun.com/bigadmin/hcl/data/sol/components/views/networking_all_results.page1.html
- Jags Desai

Need steps for rehosting FR currently running on windows 2008 R2 to LinuxOS

Need steps for rehosting FR server currently running on windows 2008 R2 to Oracle Linux 5 OS
I found something for essbase in oracle EPM whitepaper library but not for FR. Did anyone of you out there try this.
Any ideas/thoughts.
Thanks in Advance

If it's 11.1.2.1 or 11.1.2.2 you simply install it in the new host, configure it and you can either manually edit the mod_wl.conf file to point to the new server or you can re-run the web server (OHS) configuration wherever it is installed. Beware though that if you do this you will not be able to run FR against HFM.
Pablo

Needs steps for Printer setting for User-customized Paper Size

Hii
I need steps for Printer setting for User-customized Paper Size
for my requirement i hav to design this for a paper which is 9cm length and width 23cm and printer is Laser printer
Thanks
Ravi

Hi ,
Kindly send me materials regarding printer configuration , I need to confiure a printer .Kindly help me.
My ID is rakeshhaari at gmail dot com
Regards,
Hari

Please let me know the TCODE for configuring Unit of Measure with settings

Dear All,
Please let me know the TCODE for configuring Unit of Measure with settings.
Thanks

Dear All,
Please let me know that can we get PO amount with Taxes included in report ME80FN.
Is there ant other standard report to get the same?
Please help.
Thanks.
Shreya

ECM 11.1.1.5.0 - need steps for SSO integration and configuration

Hi,
I want to upgrade recent UCM 10g to ECM (or Webcenter Content) 11g. I passed via upgrade process and it looks it is working fine. Need some validation, but basically upgrade went fine.
But I lost SSO (Windows Login) functionality, asi this ECM 11g is weblogic based and uses a bit different authentication than old version.
My current test instance setup is:
Oracle database 11gR2
Weblogic 10.3.6.0
Oracle Enterprise Content Management Suite (ECM) 11.1.1.5.0
All running on the same linux machine
Currently I am only able to:
- define static users / groups in the weblogic's default authenticator
- define ldap authenticator in weblogic which can authenticate users defined in ldap
And I need to make it SSO capable (meant once user is authenticated in our windows domain, then when using Internet Explorer there is no need to enter user/password anymore)
I read some documentation and there they claim Oracle Identity Management / Access Manager is the right solution. But I do not know how to properly install and configuration of this.
Is there anybody here in this world who would provide some simple steps what needs to be done for enabling SSO for ECM 11.1.1.5.0 ?
When I read oracle documentation I am finding it to be written too much in general with too many referencing to too many other documents... I am searching for some kind of simplified installation guide for getting this SSO thing working.
Anybody here who could support me?

Hi
Steps for integration SSO (be it OAM or Oracle SSO or AD / LDAP etc ) the steps remain same except for one .
1. On WLS create the identity store provider .
This can be OID Authenticator , AD Authenticator , LDAP Authenticator depending on what you are using to store the users and their roles /groups etc .
2. Create SSO Identity Asserter .
This should be either AD Asserter (in case of using AD) , OAM Identity Asserter (if using OAM) , SSO Asserter (if using OID based SSO solution) .
3. Order the providers created in the following order and the respective flag settings :
Identity Asserter - REQUIRED
Identity Store Provider - SUFFICIENT
Default Authenticator - SUFFICIENT
After this is created stop UCM and WLS .
Start WLS admin , once it is up and running start UCM server .
Go to WLS - Security Realm - myrealm - Users and groups and verify the right set of users are seen with their correct groups .
Now launch UCM server and depending on which SSO solution is used the login page will vary where in the SSO user id / pwd can be entered .
Hope this helps .
Thanks
Srinath

Need Document/steps for configuring Samba,apache,tomcat

Hi all,
I need steps/document for configuring samba,tomcat,apache in solaris 10 x86.please guide.please send to [email protected]

docs.sun.com should have a lot od the Solaris specific documentation- I don't know how much it would have have specifically on Samba, Apache and Tomcat etc.
Documentation on configuring Samba and Apache (and probably Tomcat) are available on the respective websites. You may want to Read The existing technical Manuals then post questions on specific issues that are not covered by the exisitng documentaion.

Needed steps for installing oracle 10R2 on windows server 2003

Hi to All,
Can anybody give me steps for how to install oracle 10R2 on windows 2003 server in production environment and what is the preinstallation task and postinstallation task.
Thanks and Regards
Mohd Khaja

There is one pre-requisite that is missing from the documentation - ensuring that the administration team is adequately trained.
Since you are asking this question, I wonder whether your team is properly prepared for, and aware of, the possible nuances or changes from default that might be relevant to your environment.
For example, is your team familiar with the concept of Flashback Recovery Area and how it may fit, or conflict with, your production needs? Use of RMAN? Location of Oracle software Inventory and implications in your OS-level backup? How to configure both the software and the database to meet your Service Level Agreement requirements.
The referenced document is an excellent first step, as it asks some of the questions. If you are serious about production stability, you want to go through that as well as get appropriate level of expertise in your shop.

Steps for configuring LDAP in Portal

hi all,
i need step by step configuration for the LDAP Server in portal
so can u please help me in that.
thanks,
sriram.

Hi Sriram,
Following are few documents for configuring LDAP in portal. Have a look.
Check this to Configuring EP UME with LDAP Data Source, in the below link check the left navigation child nodes:
http://help.sap.com/saphelp_nw70/helpdata/EN/42/d7b4f47ea91635e10000000a1553f7/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/EN/48/d1d13f7fb44c21e10000000a1550b0/frameset.htm
Have a look at these BLOGS which tells you step step by approach to integrate LDAP with SAP EP.
Novell eDirectory 8.8 as UME Data Source for EP : Part I
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/2937. [original link is broken]
UME Data Source: LDAP
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/ep/setting%2bup%2ban%2bldap%2bfor%2bthe%2bportal
Windows Integrated Authentication via Kerberos on an LDAP data source
Check these
http://wiki.sdn.sap.com/wiki/display/EP/Setting%2bUp%2ban%2bLDAP%2bfor%2bthe%2bPortal
https://wiki.sdn.sap.com/wiki/display/HOME/ConfigureLDAPand+EP
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e1959b90-0201-0010-849c-d2b1d574768b
I hope these links will help you.
Regards,
Gopal.

Step for Publish a development created with Webdynpro for Java

Good Afternoon.
I am new in this of publish development in the portal.
We created a development with Webdynpro java using RFC. We want know what are the step for publish this development in the portal ESS?
The development work fine. But i don't know how to publish this in the portal.
What configurations i have that do In the part of ECC and in the part of portal.?.
Can someone help me?
Kind Regards-

Hi,
When i have that do configurations for the following paths:
Employee Self-Service>General Settings>Homepage for Self-Services-->Resources
Employee Self-Service>General Settings>Homepage for Self-Services-->Headers and Area Group Pages
Employee Self-Service>General Settings>Homepage for Self-Services-->Areas
Employee Self-Service>General Settings>Homepage for Self-Services-->Subareas
Employee Self-Service>General Settings>Homepage for Self-Services-->Services.
Kind Regards,

Need Tcode for Synchronization of SAP Useradministration with an LDAP

Hi Experts,
i am configuring the SAPR/3 4.7EE server with an LDAPserver( OID Oracle Intranet Directory server) by using the tcodes SM59,LDAP.
Now i Need the Tcode for Synchronization of SAP Useradministration with an LDAP
when i clicked on the ServerNames tab on the screen with Tcode LDAP,
i am not getting the Synchornization screen when i clicked on the Synchronization
can anyone provide me the info where i have to do the Synchronization of SAP User Administration with an LDAP?
Regds
Phani

Hi Olivier
To be specific, we have an application(.Net) which uses SAP as backend and retrieves the data from SAP using RFC and BAPI's. Well everything works fine with SAP R/3(where using the connection string and SAPConnector we could establish connection and call the RFC/BAPI).
When it comes to SAP ECC we have no idea about the connection string or how to connect using SAPConnector. I knew that ECC uses a secured connection so i want to know how to connect to SAP ECC using .Net Connnector.
For the SSL could you tell me how exactly can we apply that to the above described situation?
thanks
sathish

Need steps for Installing Oracle 11g R2 Grid Infrastrucure in Suse Linix 10

Hi,
I have system with Suse Linux 10 (64-bit), in that i need to install the Oracle 11 R2 Grid Infrastructure for
1. Grid Computing
2. ASM Cluster.
Can any one please provide the Step by step installation to me.
Thanks With Regards
Baalaji V

Ideally, you need two nodes to install a RAC. If you have only one system and trying for practice, you can do it with Virutal machines(VM) or create it as single instance.
You can refer Oracle documentation on Grid install and postings in the internet about Grid install in using VM.
Ashok

Steps for the IDOC TO FILE with ACKNOWLEDGMENT

Hello experts,
Kindly give me the step by step procedure for the following scenario.
My scenario is an IDOC( any idoc) for R/3 is coming to XI and send to FTP as XML file with out any modifications, and ftp have to send an response (acknowledgment) to XI and that to R/3 as an IDOC.
I have seen snd but i not able to find the exact steps for the above requirement. Probably i may failed to find it.
So kindly give me the steps or any blogs links explaining the above scenario.
Thanks inadvance.
Kiran.

Hi
Pls check the following docs.
ALEAUD not coming to SAP from XI & u0093Acknowledgment not possible" in idx5
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/903a0abc-e56e-2910-51a8-9dc616df56eb
if you are looking to receive the File Acknowledgements..pls check the below link
/people/michal.krawczyk2/blog/2006/06/22/xi-playing-with-the-file-adapters-acknowledgments
Regards
Abhijit

Need Steps for Configuring BI 7.0 with ECC 6

Similar Messages

Maybe you are looking for