Need steps for transporting a query
Hi friends,
Pls provide me the steps & help me understand.
I have to add a new field "doc_item" to the existing query ''zzmmr_q001'.
Please provide me the steps involved in transport. Also any checkpoints?
Please note that this field 'doc_item' is already existing in the base ODS on which this query is built on.
Regards,
R.Ravi
Hi
Please refer this thread which throws some light on modifications and their corresponding transports.
Query Transportation
Assign points if helpd
Also,
It's enough to go to transport connection in RSA1 of your development system and collect again in a new CR all the objects you need to import in your PRD environment!
for ex.. If you change only a restricted KF, you don't need to transport others than the query and its components from RSA1...
After you collected query objects in Transport Connection, are you able to see your changed objects on the right side of the screen
Collect the changed query in new request in transport connection. Check the consistency of the request before releasing in SE01.
go thru this same post..
Transporting SAP Query Changes??
Thanks
Similar Messages
-
Need steps for rehosting FR currently running on windows 2008 R2 to LinuxOS
Need steps for rehosting FR server currently running on windows 2008 R2 to Oracle Linux 5 OS
I found something for essbase in oracle EPM whitepaper library but not for FR. Did anyone of you out there try this.
Any ideas/thoughts.
Thanks in AdvanceIf it's 11.1.2.1 or 11.1.2.2 you simply install it in the new host, configure it and you can either manually edit the mod_wl.conf file to point to the new server or you can re-run the web server (OHS) configuration wherever it is installed. Beware though that if you do this you will not be able to run FR against HFM.
Pablo -
Need Steps for Configuring BI 7.0 with ECC 6
Hi All,
I need steps for configuring BI 7.0 with ECC 6, Please if anybody has material, Please share with me...
Regards,
Kiran TelkarHi,
regarding bi7 and ecc6.0 Configruration,pls chk this
https://www.sdn.sap.com/irj/sdn/developerareas/bi?rid=/webcontent/uuid/e78a5148-0701-0010-7da9-a6c721c6112e [original link is broken] [original link is broken] ...
http://sheffield.gumtree.com/sheffield/57/13455557.html
https://www.sdn.sap.com/irj/sdn/developerareas/bi?rid=/webcontent/uuid/e78a5148-0701-0010-7da9-a6c721c6112e [original link is broken] [original link is broken] ...
*pls assign points,if links useful*
regards,
CSM Reddy -
hi sap gurus,
can i steps for creating abap query
plz help me on this.
regards,
balaji.t
09990019711Hi
Please check this link for a document on ABAP query. It explains the process step by step with screen shots..
http://www.auditware.co.uk/downloads/SAPQuery_step_thru.pdf
Thanks,
Ravi -
Steps for transporting info source from BWD- BWQ- BWP
Hi all,
any body tell the steps for transporting Infosource from BWD to BWQ to BWP.
Thanks in Advance
SatyaHI Satya,
Go to transport connection select the infosources under it...select objects there select ur infoaource u want to transport-there is an option tpo change the paskage if u want...assign a new request..once the new request is aassigned...then go to SE10 and then release the request. Now its ready for transport.Normally after releasing the request the Basis guys transport the request.
Regards,
Marc.
Message was edited by: Marc -
Needs steps for Printer setting for User-customized Paper Size
Hii
I need steps for Printer setting for User-customized Paper Size
for my requirement i hav to design this for a paper which is 9cm length and width 23cm and printer is Laser printer
Thanks
RaviHi ,
Kindly send me materials regarding printer configuration , I need to confiure a printer .Kindly help me.
My ID is rakeshhaari at gmail dot com
Regards,
Hari -
Needed steps for installing oracle 10R2 on windows server 2003
Hi to All,
Can anybody give me steps for how to install oracle 10R2 on windows 2003 server in production environment and what is the preinstallation task and postinstallation task.
Thanks and Regards
Mohd KhajaThere is one pre-requisite that is missing from the documentation - ensuring that the administration team is adequately trained.
Since you are asking this question, I wonder whether your team is properly prepared for, and aware of, the possible nuances or changes from default that might be relevant to your environment.
For example, is your team familiar with the concept of Flashback Recovery Area and how it may fit, or conflict with, your production needs? Use of RMAN? Location of Oracle software Inventory and implications in your OS-level backup? How to configure both the software and the database to meet your Service Level Agreement requirements.
The referenced document is an excellent first step, as it asks some of the questions. If you are serious about production stability, you want to go through that as well as get appropriate level of expertise in your shop. -
ECM 11.1.1.5.0 - need steps for SSO integration and configuration
Hi,
I want to upgrade recent UCM 10g to ECM (or Webcenter Content) 11g. I passed via upgrade process and it looks it is working fine. Need some validation, but basically upgrade went fine.
But I lost SSO (Windows Login) functionality, asi this ECM 11g is weblogic based and uses a bit different authentication than old version.
My current test instance setup is:
Oracle database 11gR2
Weblogic 10.3.6.0
Oracle Enterprise Content Management Suite (ECM) 11.1.1.5.0
All running on the same linux machine
Currently I am only able to:
- define static users / groups in the weblogic's default authenticator
- define ldap authenticator in weblogic which can authenticate users defined in ldap
And I need to make it SSO capable (meant once user is authenticated in our windows domain, then when using Internet Explorer there is no need to enter user/password anymore)
I read some documentation and there they claim Oracle Identity Management / Access Manager is the right solution. But I do not know how to properly install and configuration of this.
Is there anybody here in this world who would provide some simple steps what needs to be done for enabling SSO for ECM 11.1.1.5.0 ?
When I read oracle documentation I am finding it to be written too much in general with too many referencing to too many other documents... I am searching for some kind of simplified installation guide for getting this SSO thing working.
Anybody here who could support me?Hi
Steps for integration SSO (be it OAM or Oracle SSO or AD / LDAP etc ) the steps remain same except for one .
1. On WLS create the identity store provider .
This can be OID Authenticator , AD Authenticator , LDAP Authenticator depending on what you are using to store the users and their roles /groups etc .
2. Create SSO Identity Asserter .
This should be either AD Asserter (in case of using AD) , OAM Identity Asserter (if using OAM) , SSO Asserter (if using OID based SSO solution) .
3. Order the providers created in the following order and the respective flag settings :
Identity Asserter - REQUIRED
Identity Store Provider - SUFFICIENT
Default Authenticator - SUFFICIENT
After this is created stop UCM and WLS .
Start WLS admin , once it is up and running start UCM server .
Go to WLS - Security Realm - myrealm - Users and groups and verify the right set of users are seen with their correct groups .
Now launch UCM server and depending on which SSO solution is used the login page will vary where in the SSO user id / pwd can be entered .
Hope this helps .
Thanks
Srinath -
Steps for transporting the created request
hi,
sap gurus,
kindly explain the configuration steps for
how we will transport a created request
from one server to another
regards,
balaji.t
09990019711.Transport Request is generated in following scenarios:
1. Customizing Request - When doing or changing some customization.
2. WorkBench Request - When configuration is cross-client. Eg Generating new Table, making changes in access sequence, Abap development, etc.
Transport Request is released through SE10, to be transported to Quality & production server.
Configuration of Transport Request System is configured by Basis consultant. Basis Consultant is also responsible for transporting the Transport request from Development server to Quality & Production.
Transport request is not generated for Master Data. For eg: Customer Master, Material Master, price master, etc.
Benefit of Transport Request:
SAP Landscape normally has 3- Tier system:
Development Server - Where customization takes place. Transport request is generated at this level & then first transported to Quality server for testing whether it meets the requirement or not. Once the requirement is met in Quality server then Request is transported from Development Server to Production Server (Actual / Live System)
Quality Server - Mainly useful for testing.
Production Server Actual / Live server, where the real transactions are created & posted.
Regards,
Rajesh Banka
Reward Points if Helpful. -
Need steps for lead distributation
i need to know the steps for LEAD distributions
cold lead to go in BW system
warm lead to sales manager's inbox
hot lead to convert into opportunity.
karanHello Sharma,
Hot leads can triger an action to create a follow up transaction...
Regards
Michalis Tamiolakis -
Need steps for report bursting in BOXI3.1
HI All,
Can someone please tell me the steps for report bursting in BOXI3.1
Thanks
Sudharsan.Hi
please take a look at this document:
[http://help.sap.com/businessobject/product_guides/boexir31/en/xi3-1_publisher_en.pdf]
It describes the usage of publications, which implement report bursting in BOBJ XI 3.1.
Regards,
Stratos -
Hi All,
Currently we are using JDK1.7.0.21 for weblogic 10.3.6 , SOA 11.1.1.6 and AIA in Production(Linux64bit). new i want migrat to Oracle JRockitJDK.can any body sent some steps for that and some documents plz..
Thank you,
Ram.There is a small example here: Middleware Snippets: WebLogic, Coherence and the G1 Collector
Note that this goes the other way around, from JRockit to Oracle JDK. In your case you can set the JAVA_VENDOR to Oracle (instead of Sun) and enter the BEA_JAVA_HOME value.
There is something like the following in the setDomainEnv file (located in the ${DOMAIN_HOME}/bin directory):
WL_HOME="/home/weblogic/weblogic12.1.1/installation/wlserver_12.1"
export WL_HOME
BEA_JAVA_HOME="/home/weblogic/jrockit-jdk1.6.0_29-R28.2.2-4.1.0"
export BEA_JAVA_HOME
SUN_JAVA_HOME="/home/weblogic/jdk1.7.0_11"
export SUN_JAVA_HOME
JAVA_VENDOR="Sun"
export JAVA_VENDOR
if [ "${JAVA_VENDOR}" = "Oracle" ] ; then
JAVA_HOME="${BEA_JAVA_HOME}"
export JAVA_HOME
else
if [ "${JAVA_VENDOR}" = "Sun" ] ; then
JAVA_HOME="${SUN_JAVA_HOME}"
export JAVA_HOME
else
JAVA_VENDOR="Oracle"
export JAVA_VENDOR
JAVA_HOME="/home/weblogic/jrockit-jdk1.6.0_29-R28.2.2-4.1.0"
export JAVA_HOME
fi
fi
By changing the JAVA_VENDOR to the right one, you can see the in the 'if' statement JAVA_HOME is set by using either SUN_JAVA_HOME or BEA_JAVA_HOME
The nodemanager.properties also has properties where JAVA_HOME is set (javaHome and JavaHome). -
Need help for SQL SELECT query to fetch XML records from Oracle tables having CLOB field
Hello,
I have a scenario wherein i need to fetch records from several oracle tables having CLOB fields(which is holding XML) and then merge them logically to form a hierarchy XML. All these tables are related with PK-FK relationship. This XML hierarchy is having 'OP' as top-most root node and ‘DE’ as it’s bottom-most node with One-To-Many relationship. Hence, Each OP can have multiple GM, Each GM can have multiple DM and so on.
Table structures are mentioned below:
OP:
Name Null Type
OP_NBR NOT NULL NUMBER(4) (Primary Key)
OP_DESC VARCHAR2(50)
OP_PAYLOD_XML CLOB
GM:
Name Null Type
GM_NBR NOT NULL NUMBER(4) (Primary Key)
GM_DESC VARCHAR2(40)
OP_NBR NOT NULL NUMBER(4) (Foreign Key)
GM_PAYLOD_XML CLOB
DM:
Name Null Type
DM_NBR NOT NULL NUMBER(4) (Primary Key)
DM_DESC VARCHAR2(40)
GM_NBR NOT NULL NUMBER(4) (Foreign Key)
DM_PAYLOD_XML CLOB
DE:
Name Null Type
DE_NBR NOT NULL NUMBER(4) (Primary Key)
DE_DESC NOT NULL VARCHAR2(40)
DM_NBR NOT NULL NUMBER(4) (Foreign Key)
DE_PAYLOD_XML CLOB
+++++++++++++++++++++++++++++++++++++++++++++++++++++
SELECT
j.op_nbr||'||'||j.op_desc||'||'||j.op_paylod_xml AS op_paylod_xml,
i.gm_nbr||'||'||i.gm_desc||'||'||i.gm_paylod_xml AS gm_paylod_xml,
h.dm_nbr||'||'||h.dm_desc||'||'||h.dm_paylod_xml AS dm_paylod_xml,
g.de_nbr||'||'||g.de_desc||'||'||g.de_paylod_xml AS de_paylod_xml,
FROM
DE g, DM h, GM i, OP j
WHERE
h.dm_nbr = g.dm_nbr(+) and
i.gm_nbr = h.gm_nbr(+) and
j.op_nbr = i.op_nbr(+)
+++++++++++++++++++++++++++++++++++++++++++++++++++++
I am using above SQL select statement for fetching the XML records and this gives me all related xmls for each entity in a single record(OP, GM, DM. DE). Output of this SQL query is as below:
Current O/P:
<resultSet>
<Record1>
<OP_PAYLOD_XML1>
<GM_PAYLOD_XML1>
<DM_PAYLOD_XML1>
<DE_PAYLOD_XML1>
</Record1>
<Record2>
<OP_PAYLOD_XML2>
<GM_PAYLOD_XML2>
<DM_PAYLOD_XML2>
<DE_PAYLOD_XML2>
</Record2>
<RecordN>
<OP_PAYLOD_XMLN>
<GM_PAYLOD_XMLN>
<DM_PAYLOD_XMLN>
<DE_PAYLOD_XMLN>
</RecordN>
</resultSet>
Now i want to change my SQL query so that i get following output structure:
<resultSet>
<Record>
<OP_PAYLOD_XML1>
<GM_PAYLOD_XML1>
<GM_PAYLOD_XML2> .......
<GM_PAYLOD_XMLN>
<DM_PAYLOD_XML1>
<DM_PAYLOD_XML2> .......
<DM_PAYLOD_XMLN>
<DE_PAYLOD_XML1>
<DE_PAYLOD_XML2> .......
<DE_PAYLOD_XMLN>
</Record>
<Record>
<OP_PAYLOD_XML2>
<GM_PAYLOD_XML1'>
<GM_PAYLOD_XML2'> .......
<GM_PAYLOD_XMLN'>
<DM_PAYLOD_XML1'>
<DM_PAYLOD_XML2'> .......
<DM_PAYLOD_XMLN'>
<DE_PAYLOD_XML1'>
<DE_PAYLOD_XML2'> .......
<DE_PAYLOD_XMLN'>
</Record>
<resultSet>
Appreciate your help in this regard!Hi,
A few questions :
How's your first query supposed to give you an XML output like you show ?
Is there something you're not telling us?
What's the content of, for example, <OP_PAYLOD_XML1> ?
I don't think it's a good idea to embed the node level in the tag name, it would make much sense to expose that as an attribute.
What's the db version BTW? -
Need table for Transport Request component
Hi,
I need the name of the table that stores the TR name and all the Objects to be transported in them.
Thnx in advance,
ChirantanCheck <b>E070</b>
E070 Change & Transport System: Header of Requests/Tasks
E070A Change & Transport System: Attributes of a Request
E070C CTS: Source/Target Client of Requests/Tasks
E070CREATE Change & Transport System: Creation Date of Request
E070DEP Change & Transport System: Dependencies of Requests
E070L CTS: Index for Assigning Numbers to Requests/Tasks
E070M CTS: Target Development Class/Layer for Requests
E070N UNIX/SAP User Connection
E070P Path under which a C correction is created
E070TC Help Table for E070 for Client-Specific Imports
E070USE Use of Current Requests by Users
E071 Change & Transport System: Object Entries of Requests/Tasks
E071C Change & Transport System: Client-Specific Lock Flag
E071E Lang. Transport: Positive List for Generic Object Selection
E071K Change & Transport System: Key Entries of Requests/Tasks
E071KF Change & Transport System: Nametab Information on Key Fields
E071KFINI Change & Transport System: Nametab Information on Key Fields
E071L Language Transport: Transport Information
E07T Change & Transport System: Short Texts for Requests/Tasks -
Need steps for Installing Oracle 11g R2 Grid Infrastrucure in Suse Linix 10
Hi,
I have system with Suse Linux 10 (64-bit), in that i need to install the Oracle 11 R2 Grid Infrastructure for
1. Grid Computing
2. ASM Cluster.
Can any one please provide the Step by step installation to me.
Thanks With Regards
Baalaji VIdeally, you need two nodes to install a RAC. If you have only one system and trying for practice, you can do it with Virutal machines(VM) or create it as single instance.
You can refer Oracle documentation on Grid install and postings in the internet about Grid install in using VM.
Ashok
Maybe you are looking for
-
Positioning cursor in texteditor
Hi all, How to set cursor in texteditor control in dynpro. Regards, bala
-
First Ever Time using iweb, Advise needed
OK.. I have never even opened iweb before let alone used it! 5 minutes later I have what I wanted..!!! It seems extremely intuitive. My first project is very simple. I have scanned a family Christmas card picture and want to create a site where frien
-
Hi, Recently we experienced a Deadlock which seemed to be related to JMS processing. I did a Thread Dump whilst the server was in this state which showed a number of "Blocked Lock Chains", which boiled down to 2 "Open Lock Chains". The first was webl
-
Safari, quicktime, and Preview disappeared
Hi, i switched on my imac and safari, quicktime and preview were disappeared from my application folders, i had to reinstall again quicktime and safari but i don't know how to replace preview. How is it possible that this 3 applications are disappear
-
VCR to Mac Did this with DV; now I own Hard drive camera; methods?
Hello, I previously owned a DV, tape-based, video camera. It was good but it broke. I regularly used it to transfer VHS tapes to the DV camera, then from the DV camera to the PC (now a Mac!...yeah!). I've replaced that camera with the Canon HF100, a