Need steps to configure Postfix in Mac 10.6.4

Hello,
I am working on a project where I need a local smtp server, and I want to use inbuilt postfix on my Mac. How can I configure postfix server on my Mac that allows me to send/receive emails from the machines on the same subnet?
Thanks for all the help..
varya

[Postfix Documentation|http://www.postfix.org/documentation.html]
most of the configuration documentation is also on your system under the directory
/usr/share/doc/postfix
Message was edited by: Nils C. Anderson

Similar Messages

Need steps to configure BAM and DATAMART for Oracle BPM Enterprise

Hi,
Need steps to configure BAM and DATAMART for both Oracle BPM 10.3 Enterprise Standalone and Oracle BPM 10.3 Enterprise Weblogic.
Configurations like BAM Updater Service, Process Data Mart Updater Service, Start Up / Shut Down of the service etc.
I am referring : http://www.oracle.com/technology/products/bpm/bpm10gr3technicalarticles/BPMConfiguringAndTroubleshootingBAMAndDataMart.pdf

Hi,
To add system to solman:
Go to SMSY and define:
1) Server --> host name, IP etc
2) DB --> DB details
3) System --> R3, Netweaever etc, assign proper components, products
4) define and assign logical components for the system defined in step 3
5) generate RFC destionation to the satellite system
6) Provided you have the necessary trusted authorization and if the RFCs are generated successfully then your task is done. Else you'll have to troubleshoot.
Once this is done, you need to goto SOLUTION_MANAGER and define
1) new solution
2) make necessary inclusion in Solution Landscape Maintenance
3) include logical component
This completes the system setup for you.
For CCMS agent configuration, refer:
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/e2/eff640fa4b8631e10000000a1550b0/content.htm
For system monitoring using solman, refer:
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/0b/160419162a476380b5608e7f27a742/frameset.htm
Hope this helps.
Rajeev

Need Steps for Configuring BI 7.0 with ECC 6

Hi All,
I need steps for configuring BI 7.0 with ECC 6, Please if anybody has material, Please share with me...
Regards,
Kiran Telkar

Hi,
regarding bi7 and ecc6.0 Configruration,pls chk this
https://www.sdn.sap.com/irj/sdn/developerareas/bi?rid=/webcontent/uuid/e78a5148-0701-0010-7da9-a6c721c6112e [original link is broken] [original link is broken] ...
http://sheffield.gumtree.com/sheffield/57/13455557.html
https://www.sdn.sap.com/irj/sdn/developerareas/bi?rid=/webcontent/uuid/e78a5148-0701-0010-7da9-a6c721c6112e [original link is broken] [original link is broken] ...
*pls assign points,if links useful*
regards,
CSM Reddy

Steps to Configure Speed Dial

Hello,
Need steps to configure speed dial.
Thanks
Abhishek

Hello,
Go to the phone / UDP configuration page and check the Phone Button Template and check whether you have enough lines available to configure as speed dials. If not create a new Phone button template with sufficient speed dial lines and assosiate the newlt created Phone Button Template to your phone / UDP configuration page. Clikc the link Add/Update Speed Dials on the same page and update the speed dial with the requested entries with the Label asthe Speed dial Label and the Number as the number where the speed dial shld reach.
The UDP profiles has to log out and login back for the changes to take effect.
Hope this helps..
Please let me know whether this was infromative or not.
Thanks

Steps to configure FBA in office 365

hi,
i need to integrate users in SQL list to office 365 , is it possible to achieve this using Form based authentication??
if yes , then give some guidance steps to did integration.
if not , then suggest me a best and simple way to do this.
Please help me with this? i need steps to configure FBA in office365.
Thanks
Mohammad Arif

These are not in SharePoint. those web.config are in ADFS server.
http://social.technet.microsoft.com/wiki/contents/articles/4184.ad-fs-2-0-auto-populate-the-username-field-of-the-forms-sign-in-page-when-signing-in-to-office-365.aspx
Modify FormsSignIn.aspx.cs
1. Open FormsSignIn.aspx.cs for editing
2. Find the following and set your cursor to the next line down:
    using System;
3. Paste the following code:
    using System.Web;
4. Find the following and set your cursor to the next line down:
    protected void Page_Load( object sender, EventArgs e )
5. Paste the following code:
    HttpCookie cookie = Context.Request.Cookies.Get( "Office365Username" );
     if ( null != cookie && !String.IsNullOrEmpty( cookie.Value ) )
             UsernameTextBox.Text = cookie.Value;
             cookie.Expires = DateTime.UtcNow.AddDays( -1 );
             cookie.Value = "";
            Context.Response.Cookies.Add( cookie );
6. Save and Close FormsSignIn.aspx.cs
Test
1. Launch Internet Explorer and browse to
https://portal.microsoftonline.com
2. Type the username and tab to the password
field to cause the UPN suffix detection to trigger
3. Select the link which takes you to sign in at your AD FS 2.0 Federation Service
4. Observe the forms-based sign-in page presented to you. You should find that the username field is populated with the value used on the Office 365 sign-in page.

[SOLVED] Help needed to configure postfix

I aim to be able to manage myself my mailserver.
For now i just need help in order to configure postfix so i can send an email from my postfix configured mail to my gmail account.
I've read the following wiki pages :
https://wiki.archlinux.org/index.php/postfix
https://wiki.archlinux.org/index.php/Si … ail_System
Wich are really not informative.
I've my own domain name, wich can be pinged, i will call it : domain.free.fr
Here is what i've done so far :
Install postfix :
sudo pacman -S postfix
Configure myhostname in /etc/postfix/main.cf
myhostname = domain.free.fr
Configure the username in /etc/postfix/aliases
root: glow
Reload aliases and postfix
newaliases
postfix reload
postfix status
postfix/postfix-script: the Postfix mail system is running: PID: 11706
Then i've tried to use sendmail to send an email to my gmail adress :
sendmail [email protected]
Test
Nothing coming in my mail.
What do i do wrong ?
Ican't find any log about postfix, /var/log/mail.log do not exist, is this normal ?
Last edited by GloW_on_dub (2014-03-31 15:45:54)

mailq
-Queue ID- --Size-- ----Arrival Time---- -Sender/Recipient-------
CCD29FF253 262 Mon Mar 31 16:58:37 [email protected]
(delivery temporarily suspended: connect to alt4.gmail-smtp-in.l.google.com[74.125.25.27]:25: Connection timed out)
[email protected]
-- 0 Kbytes in 1 Request.
My mail is in the queue, but cannot be delivered
Last edited by GloW_on_dub (2014-03-31 15:03:51)

I mac -- how do I transfer template date and logo to the other 9 template cards. I am new to this and need step by step. I have the first template completed. Thanks

I mac -- how do I transfer template date and logo to the other 9 template cards.
I am new to this and need step by step. I have the first template completed.
Thanks

Apps and media are forever tied to the AppleID used to download them.
You cannot transfer from downloads from one AppleID to another, nor
can you merge AppleIDs. If you wish to start using your own AppleID,
you will have to redownload all the items you wish - paying again under your
AppleIDfor anything requiring payment.
Logout of iTunes under your old ID and login using the new ID.

Need Document/steps for configuring Samba,apache,tomcat

Hi all,
I need steps/document for configuring samba,tomcat,apache in solaris 10 x86.please guide.please send to [email protected]

docs.sun.com should have a lot od the Solaris specific documentation- I don't know how much it would have have specifically on Samba, Apache and Tomcat etc.
Documentation on configuring Samba and Apache (and probably Tomcat) are available on the respective websites. You may want to Read The existing technical Manuals then post questions on specific issues that are not covered by the exisitng documentaion.

Please help�. I need a steps for configuration

Dear All,
Plese help me.... I am new in StorEdge configuration.
Please give me the steps for configuration of Sun StorEdge 3310
Thanks

You didn't mention it yet, but ...
Have you gone through the manuals?
http://docs.sun.com/app/docs/coll/3310scsi-array*

Need steps -help new modom - hplaserjet P1102w Mac computer

I just got a new centurylink modom; printer wont work. (doesn't read) Need steps to fix.

Hi,
Please follow this document
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03436078&tmp_task=solveCategory&cc=us&dlc=en&la...
Hope this helps
Although I am an HP employee, I am speaking for myself and not for HP.
*Say thanks by clicking the "Kudos! Star" which is on the left*
Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue.

Need Step-by-step configuration of SAP TR

Hello all,
Can any one please share the step-by-step configuration steps for configuring SAP-TR module... basically looking to configure the securities and derivatives. plz send to Text Removed
Thanks alot in advance.
Regards,
Satish Setty
Edited by: Lakshmipathi on Jan 26, 2012 9:17 PM
Stick to forum rules and dont ask to share SAP information to personal mail

Hello Satish,
configuration depends on the business demands of your company or customer. In a delivered system (client 000) you can find example customizing as proposed by SAP. Next to customizing steps you usually have documentation related to the step.
Customizing for Treasury Management is mostly under the tree:
Financial Supply Chain Management->Treasury and Risk Management
BR,
Tomislav

Need step by step to get port 48705 open for Panasonic Bluray

Classic handoff syndrome. Brand new Panasonic Bluray connected to internet out of the box with Airport Extreme, streamed fast. Imac running Snow Leopard.
Updated Panasonic firmware and no connections. Panasonic tech tried for a half hour and concluded that I needed my ISP to open port 80, 443 and 48075. I think that 80 and 443 are open by default. Resetting the settings and the player did nothing....gateway: fail. There is no way to undo the firmware update.
Call India and Verizon says that they cannot assist me with AEBSn just Verizon routers. All searches for this problem give directions with too many blanks that I don't have the info to fill in. Below is an example of an attempt in the community to help. I wouldn't know where to find the <missing info> . I couldn't find the port mapping tab in this version....help would be appreciated.
Tesserax
Re: how can you perform a Port Forwarding Procedure on Ports 48705, 443 and 80 so my Blu Ray player will be able get and IP address and connected to your gateway.
Oct 1, 2011 11:22 PM (in response to doc9850)
Again, you would only need to configure for port mapping if you intend on accessing the Blu-ray player from a remote location.
Port mapping takes two basic steps:
Either assign a static Private IP address or use the AirPort's ability to allow DHCP to assign a reserved IP address to the Blu-Ray player, and
Configure the AirPort, using the AirPort Utility, for the proper ports to map.
The following are the basics for setting up one of the newer 802.11n AirPorts for port mapping/forwarding: AEBSn - Port Mapping SetupTo setup port mapping on an 802.11n AirPort Extreme Base Station (AEBSn), either connect to the AEBSn's wireless network or temporarily connect directly, using an Ethernet cable, to one of the LAN port of the AEBSn, and then use the AirPort Utility, in Manual Setup, to make these settings: 1. Reserve a DHCP-provided IP address for the host device.AirPort Utility > Select the AEBSn > Manual Setup > Internet > DHCP tab
On the DHCP tab, click the "+" (Add) button to enter DHCP Reservations.
Description: <enter the desired description of the host device>
Reserve address by: MAC Address
Click Continue.
MAC Address: <enter the MAC hardware address of the Blu-ray player>
IPv4 Address: <enter the desired IP address>
Click Done.
2. Setup Port Mapping on the AEBSn.AirPort Utility > Select the AEBSn > Manual Setup >Advanced > Port Mapping tab
Click the "+" (Add) button
Service: <choose the appropriate service from the Service pop-up menu>
Public UDP Port(s): <enter the appropriate UDP port values>
Public TCP Port(s): <enter the appropriate TCP port values>
Private IP Address: <enter the IP address of the Blu-ray player>
Private UDP Port(s): <enter the same as Public UDP Ports or your choice>
Private TCP Port(s): <enter the same as Public TCP Ports or your choice>
Click "Continue"
AirPort Utility Port Forwarding for AE is not an intuitive app. It is version 5.6.1 which is up to date for SL.
http://www.google.com/search?client=safari&rls=en&q=48705+port&ie=UTF-8&oe=UTF-8 shows that other people are needing to do this with various routers.
The player is Panasonic DMP-BDT500 Integrated Wi-Fi 3D Blu-ray DVD Player
FYI, the player plays disks beautifully.
Thanks for any help.
David

My problem seems to be that my AirPort Utility does not have Port Mapping under the Advanced Tab.
This tells us that you have another router "upstream" on your network, which you may call your modem, but it is in fact a modem/router or gateway type of device.
The AirPort Extreme is configured correctly in Bridge Mode to work with this type of device on your network.
You can verify this by clicking the Internet icon, then clicking the Internet Connection tab. You will see that the setting for Connection Sharing is set to ""Off (Bridge Mode)". That means that the AirPort is not providing the routing services for your network.
Your modem/router or gateway is the device that will need to be configured for port forwarding / mapping.....not the AirPort Extreme.
I am sure that Tesserax will have similar comments.

Configure PostFix to reject emails when nslookup ≠ ip

Hey Everyone,
I'm trying to configure postfix to reject messages that don't have the correct domain associeated with the ip address. From what I can tell so far i need to create a header_check file, and tell postfix to use it in main.cf. My only problem is I don't know what things I need to put in the header_check file. If any one has already done this, it would be much apprecieated if you could post it for all to see.
Thanks,
Eric
Dual 2.0 1.5Gb Raid O Mac OS X (10.4.3)

Eric,
by doing so you will block more mail than you really want. With the shortage of IP numbers, virtual hosting has become increasingly popular. Thus a single IP number is often being used for a large number of virtual domains. In those cases a reverse lookup will only be correct for one of those domains. This doesn't mean the mail is not legit.

Configure Postfix to allow a non fully-qualified hostname to send email

I have a Mushroom Networks Porcini box that sends notifications from email address bbna@bbna
When I set up the Porcini to send notifications to my email address using a Mac Mini running Snow Leopard Server the email session aborts:
macbookenet:~ pderby$ telnet red.pderby.com 25
Trying 208.37.99.226...
Connected to red.pderby.com.
Escape character is '^]'.
220 red.pderby.com ESMTP Postfix
HELO bbna
250 red.pderby.com
MAIL FROM:<bbna@bbna>
250 2.1.0 Ok
RCPT TO:<[email protected]>
504 5.5.2 <bbna>: Helo command rejected: need fully-qualified hostname
I would like to configure Postfix to accept mail from this MAIL FROM address as an exception, rejecting any other addresses that are not fully-qualified.
Is there a way to do that?
Thanks for any help!

Launch Terminal.app and buried in the usual postconf -n output for your host, you should find this line:
smtpd_helo_restrictions = reject_invalid_helo_hostname reject_non_fqdn_helo_hostname
If so, then edit it with the following two lines (that first line is one long line) to tweak that:
sudo postconf -e "smtpd_helo_restrictions = permit_mynetworks reject_invalid_helo_hostname reject_non_fqdn_helo_hostname"
sudo postfix reload
That will cause local hosts (from the mynetworks setting) to bypass the SMTP HELO check that's tripping your "underpowered" box here.

Hi, i am badly in need of help. i partitioned my mac hd yesterday and now the boot camp is nt working as i was using win 7 on it. i am using macbook pro 13'' 2011. plz help me. anxiously waiting for response... specially from "Christopher"

hi, i am badly in need of help. i partitioned my mac hd yesterday and now the boot camp is nt working as i was using win 7 on it. i am using macbook pro 13'' 2011. plz help me. anxiously waiting for response... specially from "Christopher murphy"

you can't add or mofidy partition numbers. especially not if and once you have windows installed.
boot from Windows 7 DVD afterwards
but first you have to tell us and Christopher what and how you partitioned your system.
Successful setup of OS X Lion + Data Partition + Bootcamp Win7 Ult
https://discussions.apple.com/thread/3293948
So after many, many hours I think I've finally figured out how to successfully setup Mac OS X Lion on one partition, a seperate data partition, and Windows 7 Ultimate on a Bootcamp partition . Here is a screenshot of my setup on my 13" MacBook Pro
Thread with suggestions on Windows backup methods:
https://discussions.apple.com/thread/3798090
Paragon CampTune
Paragon CampTune is a commercial product that is designed expressly for this task. http://www.paragon-software.com/home/camptune/ It consists of a downloadable ISO that needs to be burned to a disc and booted from in order to resize the partitions costs US$19.95.
Securing Dual-System Configuration
Imaging is still the most affordable and robust way to secure computer data. Unfortunately Mac OS X backs up only HFS+ volumes, leaving Windows with dual-system configurations unsecured. You can permanently lose all of your data unless you have a Windows-compatible backup solution.
Paragon’s CampTune and Paragon’s Drive Copy for Mac can secure the entire dual-system configuration. CampTune creates traditional images of volumes or entire hard disks, Drive Copy can copy them to other disks. In case of an emergency, you can restore the previously created image or copy all your data back to its original state.
GParted Live
GParted Live is similar to CampTune as it is also distributed as a bootable image that needs to be copied to a CD/DVD or USB flash drive. As free and open source software, distributed under the GPL, it will always be available free. Since it has more functions than CampTune, it may be harder for folks who are not as experienced with partitioning hard drives. http://gparted.sourceforge.net/
iPartition
Coriolis Systems' iPartition is a £29.95 ($44.95 US) utility that runs in Mac OS X and allows resizing of all of the relevant partition formats, including HFS+, FAT32, and NTFS. It provides a Mac-oriented user interface that may be easier to manage than some of the free utilities. As it is not capable of resizing the boot disk, it requires a bootable external disk or a boot DVD. (A tool to create a boot DVD is included.)
Paragon Partition Manager
From the makes of CampTune is a commercial tool that is similar in functionality to GParted Live, but has a more polished/friendly user interface than GParted Live. Previously only the US$79.95 Professional version supported all the features required for this, but as of version 11 the US$39.95 Personal version has also been reported to work. http://www.paragon-software.com/home/pm-personal/
Winclone/Disk Utility
Winclone is a free tool for creating and restoring backup images of your Windows partition. One of its key features is that it can restore to a larger partition than the one the image was created from.
NOTE: Winclone has been discontinued, but for now remains available and capable of completing these tasks (including creating and restoring Windows 7 images).
Winclone updated to support Lion Winclone updates and download
Disk Utility can resize HFS+ (Mac OS) partitions, but is currently incapable of resizing NTFS partitions, so you could use it to reduce the size of the HFS+ partition and create a new larger placeholder MS-DOS (FAT) partition
The full process would be:
Backup Windows partition with Winclone.
(if the new Windows partition is smaller than the old one make sure you set the preferences in Winclone to save the image as an uncompressed dmg)
Delete old Windows partition
Resize current Mac Partition
Create new Windows partition as MS-DOS (FAT) in free space after Mac OS partition.
(If the new Windows partition is smaller than the old one an additional step is required: shrink the filesystem on the image by selecting Tools->Shrink Windows (NTFS) Filesystem)
Reboot your computer for the new Windows partition to mount properly (winclone may not restore if you don't reboot)
Restore Winclone partition over new Windows partition
An alternate Winclone based process is described in the External Guides section
Native OS utilities
MR user Kazyua reports that you can use the disk management utilities provided with the current operating systems if you want to do it manually. Windows 7 and OS X both have partition resizing functions built in. In OS X, open Disk Utility and manually shrink the mac HFS+ partition by dragging the lower right corner. Then in windows go to the start menu and type "disk management" into the search box then hit enter. You should get an overview of the drives you have and the individual partitions. Right-clicking on the partition gives an "Extend Volume" option. The Windows NTFS volume should then be extended into the free space you created with Disk Utility. This method has not worked for other users, so try at your own risk.
Resizing under VMWare Fusion
If you are looking to allocate more space to Windows under VMWare please refer to the following thread http://forums.macrumors.com/showthread.php?t=828182
From http://guides.macrumors.com/Extend/Resize_Boot_Camp_Partition
Thread with suggestions on Windows backup methods:
https://discussions.apple.com/thread/3798090

Need steps to configure Postfix in Mac 10.6.4

Similar Messages

Maybe you are looking for