Need Suggestion for design
Hi,
My application is based on multiple forms. When user logged into application he has list of programs.
Now each program has multiple forms which need to field step by step and at the last page it should save the data.
So, right now as per our design we create bean for each form, each bean has at least 20 variables and generate their objects with session scope. When use exit from the last page we manually remove all the objects.
Now the problem with this pattern is that we receive PemGenSpace error in every week.
The reason is we use to store large object to session.
Can you please suggest me a better solution to overcome this problem?
Thanks.
So let say if user is on 4th form now if he jumps to the 1st form we have to fetch it from the database that is also cost to performance.
To save this cost we use to save the data into session.Which has its own cost, which is much higher, as your server stops working.
It is futile to quibble about a database lookup or two when your cure is worse than the disease. You have to put the data somewhere else, that doesn't cost memory. In other words, the database.
What we have here is premature optimization. Have you even measured what the cost of the extra lookups is?
As per your suggestion if we save data to DB with auto commit false then are we able to retrieve those data from DB?Of course, as long as it's inside the same transaction.
Similar Messages
-
Need suggestion for designing a BEx report
Hi,
I need suggestions for designing a BEx report.
Iu2019ve a DSO with below structure:
1. Functional Location u2013 Key
2. Maintenance Plan u2013 Key
3. Maintenance Item u2013 Key
4. Call # - Key
5. Cycle u2013 Data Field
6. Planned Date u2013 Data Field
7. Completion Date u2013 Data Field
This DSO contains data like:
Functional -
Plan --- Item -
Call# --- Cycle -
Planned Dt -
Completion Dt
Location
11177 -
134 -
20 -
1 -
T1 -
02-Jan-2011 -
10-Jan-2011
11177 -
134 -
20 -
2 -
T2 -
15-Feb-2011 -
11177 -
134 -
20 -
3 -
T1 -
15-Mar-2011 -
11177 -
134 -
20 -
4 -
M1 -
30-Mar-2011 -
25000 -
170 -
145 -
1 -
T1 -
19-Jan-2011 -
19-Jan-2011
25000 -
134 -
145 -
2 -
T2 -
20-Feb-2011 -
25-Feb-2011
25000 -
134 -
145 -
3 -
T1 -
14-Mar-2011 -
Now Iu2019ve to create a report which will be executed at the end of every month and should display the list of Functional Locations whose Cycles were planned in that particular month, along with the last completed Cycle/Date.
Thus based upon above data, if I execute report at the end of (say) March then report must display:
Functional --- Curr. Cycle --- Planned Date --- Prev. completed Cycle --- Prev Completed Date
Location
11177 -
T1 -
15-Mar-2011 -
--- T1 -
-- 10-Jan-2011
11177 -
M1 -
30-Mar-2011 -
--- T1 -
-- 10-Jan-2011
25000 -
T1 -
14-Mar-2011 -
--- T2 -
-- 25-Feb-2011
Any idea how can I display Previous Completed Cycle and Completion Date (i.e. the last two columns)?
Regards,
Vikrant.hi vikrant,
You can a Cube at the reporting layer which gets data from DSO and which has these 2 extra characteristics completion date and previous cycle along with other chars and keyfigures from DSO.
You can populate these based on your logic in the field routine.
Hope it helps.
Regards
Dev -
Need Suggestion for Archival of a Table Data
Hi guys,
I want to archive one of my large table. the structure of table is as below.
Daily there will be around 40000 rows inserted into the table.
Need suggestion for the same. will the partitioning help and on what basis?
CREATE TABLE IM_JMS_MESSAGES_CLOB_IN
LOAN_NUMBER VARCHAR2(10 BYTE),
LOAN_XML CLOB,
LOAN_UPDATE_DT TIMESTAMP(6),
JMS_TIMESTAMP TIMESTAMP(6),
INSERT_DT TIMESTAMP(6)
TABLESPACE DATA
PCTUSED 0
PCTFREE 10
INITRANS 1
MAXTRANS 255
STORAGE (
INITIAL 1M
NEXT 1M
MINEXTENTS 1
MAXEXTENTS 2147483645
PCTINCREASE 0
BUFFER_POOL DEFAULT
LOGGING
LOB (LOAN_XML) STORE AS
( TABLESPACE DATA
ENABLE STORAGE IN ROW
CHUNK 8192
PCTVERSION 10
NOCACHE
STORAGE (
INITIAL 1M
NEXT 1M
MINEXTENTS 1
MAXEXTENTS 2147483645
PCTINCREASE 0
BUFFER_POOL DEFAULT
NOCACHE
NOPARALLEL;
do the needful.
regards,
SandeepThere will not be any updates /deletes on the table.
I have created a partitioned table with same struture and i am inserting the records from my original table to this partitioned table where i will maintain data for 6 months.
After loading the data from original table to archived table i will truncating the original table.
If my original table is partitioned then what about the restoring of the data??? how will restore the data of last month??? -
created an account but haven't yet purchase any products yet! I'm a publisher launching a magazine so i need something for design and making a layout for magazine! Please help is there a number i can talk to someone ?
Adobe Connect Support phone numbers
or
Cloud Plans https://www.adobe.com/products/creativecloud/buying-guide.html -
Need suggestion for USB Bluetooth Adapter for HP Z230 Workstation
I've just purchased an HP Z230 Workstation, with an I7 processor. I need to equip it with Bluetooth capability so that I can connect the computer to an old Palm Tungsten T2.
There are gobs of USB 4.0 Bluetooth adapters / dongles on the market, but reading buyer's comments, they all seem to have some type of problem with compatibility or installation issues on something.
Does anyone have a suggestion for a USB Bluetooth adapter that has worked well with the Z230?
Thanks in advance for any help.
Terry
This question was solved.
View Solution.I suggest joining the Enterprise Buisness forum and posting your query there.
Your HP Z230 Workstation is a business class HP product and not than a consumer class device. This is the HP Consumer support forum.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer -
Need suggestion for new laptop
Hi, everyone I'm needing suggestions. I had a touchsmart tx2z however after nearly 4 years it has bit the dust couldn't be saved after its last crash computer would turn on but screen would stay black and ome of the keys like the caps lock would flash. Computer guys say my motherboard has gone bad. I'm looking for another computer now but would like one that is similar to the hp touchsmart but does not cost a lot of money.
Here is the current line-up of HP Touchscreen Laptops. Prices start at about $650 and go up from there. $650 sounds OK to my for a touchscreen laptop, but price is a subjective item. If these are too rich for you, you could always look at regular laptops.
Please send KUDOs
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240 -
Need suggestion for choosing Java development enviroment
Hi Evereyone,
I am new to Java Desktop Application.I need help on choosing proper Java technologies and development tool.
We have an existing CLIENT/SERVER based distributed control system, which was developed in C++(Server side) and VB(Client GUI).Now we are think of migrating the system to Java platform.
Here is the outline:
We want to create web based application that will run on windows and linux (linux on embedded PC).
The application should be able to support 10 � 100 users at once accessing/editing database.
We will also need to create a communication server that will run on web server P.C. that will communicate tcpip to field panels/log to db, as well as allow web screens to send/receive commands with field panels etc.
Could any one give me some suggestion about it?
I am thinking of Using J2SE 5.0, including RMI, JDBC and Swing for GUI. As for field panels, may choose J2ME.
Thank you very much in advance.Thanks, zadok .
Actually, I don't have the system requirements neither. All I know is the following outline:
"We want to create web based application that will run on windows and linux (linux on embedded PC).
The application should be able to support 10 � 100 users at once accessing/editing database.
We will also need to create a communication server that will run on web server P.C. that will communicate tcpip to field panels/log to db, as well as allow web screens to send/receive commands with field panels etc."
It is a interview question, which need me to do research and give some suggestions. What I want to know is to figure out what kind of Java technology is necessary for developing this system because I want to make sure I head to right direction.
I know somehow it is hard to give suggestion based on this limited information.
One more thing I was confusing is the server-side architecture.
I need suggestion about sever side architecture:
a. write a dedicated server-side program, which act
as communication server to monitor and control field
panel, also act as server-side applicaiton by using
RMI to communicate with Client-side communication.
b. choose a general web server architecture. Put
everything in server side in Web Server, for example
Tomcat AS container, implementing the Communication
server as Web Service and the request from
Client-side go to Web Server first, then dispatch to
a proper web service.Why did you not include this information in the original question!
Why don't you just use Tomcat?
For your answer, "Why don't you just use Tomcat?", does it mean Tomcat without Web Service will be enough for this system development? Could you give me some detail about it?
Thank you very much, zadok. -
I need suggestions for an online trading application
Hi,
I am going to develop an online trading application. I have decided to use JAVA EE 5 and I have read "The Java(tm) EE 5 Tutorial". Because I am a (C++) programmer and new to Java, I need suggestions to start development.
Here is summary of the system in my mind. There will be
a database to store user's information and operations,
a web client for creating and managing user accounts,
a desktop application and web client for users for online trading and
an application client for brokers for risk management.
Here is a sample scenario for flow,
- User wants to create an account
- Company creates an account for user
- user gets the prices and trades via application client (web or desktop)
- system informs dealers and broker via their client platform
- broker perform necessary operations.
Java EE 5 Application model fits the system I am trying to develop but I feel I still need some guidance and there are a few things I couldn't figured out yet. For these reasons I want to develop a prove of concept system and this is the system in my mind.
- A simple database
user (user_id, user_login, user_password, user_name)
stock (stok_id, stok_name)
operation (op_id, user_id, stok_id, op_type, op_amount, op_value)
- A price server
will generate random prices and push new values to registered clients
- A web client to create new users (for admin)
- A web client to display operations of users (for user)
- A desktop application and web client for operation entries (for users)
displays prices coming from price servers, sends users trade requests
- A desktop application client for informing admin about trades (for admin)
when a user buys or sells something, this client notified (user buy/sell something)
What do you offer for this sample system?
Which is the best IDE?
Which Application Server should I use (scalability and speed is critical)?
Which Java EE APIs should I use?
JSP or JSF?
Will I need hibernate?
And so on.. I need some points to start and go.
Thanks for any help.
AhmetIt wouldn't be an arbitrary track. However, maybe you could make an arbitrary track by dividing the track into segments. Each segment is either a straight line or an arc. These are easy to model the cars' behavior on, because you'll have a straightforward way to determine the direction the car should be facing, and the range to the left and right where the car can stray and still be on the track.
-
Need suggestions for concurrent reads while deleting all entities
Hello,
we need some suggestions for the following use case, as we cannot seem to find the correct transaction locking combination to meet our needs.
We are using BDB JE 4.1.10, and the entityStore is transactional. In a nutshell, BDB JE is used as a Cache for specific data that is pulled and updated regularly from a source Oracle DB. The application that holds BDB is a realtimel app, and response time is critical.
In order to avoid having to merge (Insert/update/delete) entities for some of the tables that are very static and small (a few hundred records that might change every day or so), we are trying to simply delete all records (with an EntityCursor loop, since there is no 'deleteAll' that we could find) and reinsert all data every 5 minutes, and then committing when the whole process is complete. This should always be very quick, but we are not immune to timeouts from the source Oracle DB, so the transaction can be long.
Ideally, while the delete/insert is happening, we want any concurrent read operations to return the old data (before the delete). We have made a test that locks the updater thread between the 'delete all' and 'update all' methods, so that the delete cursor is closed, but the Tx is not yet commited. We have tried the following for our reader thread:
1- If we get() a deleted entity with a LockMode.READ_UNCOMMITTED, we get a null entity back.
2- If we get() a deleted entity with LockMode.READ_COMMITTED, we get a LockTimeoutException.
We have also considered simply using truncate on the EntityStore, but this requires closing and reopening the DB, so this would not work for our need to always return a value, instantly.
Any ideas, suggestions on how we could do this in a simple manner?
Thanks,
MaxHello Max,
I understand the issue you're describing.
I think the best performing solution by far is to load the new data into new databases while servicing reads from the old databases. When the load is complete, reads can be diverted to the new databases, and the old databases can then be removed.
Unfortunately, this is easier to do with the base API than with the DPL, because the DPL is managing the underlying (base API level) databases for you.
However, even using the DPL, this approach could be very straightforward if you happen to be keeping this data set (the one that needs to be reloaded) in a separate EntityStore, or you can change your application to do so. If so, you can create a new (empty) EntityStore with a different name and use this store for loading the new data. When the load is complete, divert reads to the new EntityStore object and remove all databases for the old EntityStore.
If this is impractical, please explain, and I'll try to suggest a different solution. If you cannot use a separate EntityStore for this particular data set, then the solution may be more complex.
--mark -
Need suggestions for good online Adobe classes in photoshop, ill. indesign etc.
Hi I am a graphic designer and would like some suggestions for good online Adobe classes ... I found
Adobe Master Series Online Training Library at the Adobe store and was wondering has anyone had good, bad ugly experience with this before I make the purchase. The suite offers training in Photoshop, Illustrator, InDesign, Dreamweaver, Flash, and various Macromedia titles so it covers it all for me in one go.A less expensive, non-subscription option would be http://www.vtc.com they offer many video cds for applications that have given many I know a leg up on learning an application.
-
Need suggestion for creating 'whispy smoke'
Hi All,
I'm trying to figure out a way to create a cartoonish looking whispy smoke. I've played with Trapcode Particular and that creates some very realistic looking smoke, probably too realistic. I've played with CC Particle World, and also tried painting the smoke and then animated it on with a mask and a stroke set to reveal the original based on the mask. Nothing really gets close to what I'm looking for. Here's a sample of the client's original art:
Any suggestions for how to achieve this?
Thanks,
CJTrapcode 3D Stroke with taper enabled.
Mylenium -
Need suggestions for a new printer with OS 10.9.5
I have a 2010 HP 6500 A Plus printer that has worked well with my iMac circa 2010. Printer is not feeding paper. It won't scan. Are there suggestions for a new compatible printer for OS 10.9.5.?
Hey Debbisita,
Thanks for the question. It sounds like you are experiencing issues with your Printer and OS X. Before opting to purchase a new printer, you can try these troubleshooting steps to completely isolate the issue:
Troubleshooting printer issues in OS X - Apple Support
http://support.apple.com/ts3147
Follow these steps until the issue is addressed:
Make sure that the printer is powered on, has ink / toner, and that there are no alerts on the printer’s control panel. Note: If you cannot clear an alert on the printer's control panel, stop here and check the printer's documentation or contact the manufacturer for support.
Ensure the printer is properly connected to a USB port on the Mac or AirPort base station / Time Capsule. If the printer is a network-capable printer, make sure that it is properly connected to your home network.
Use Software Update to find and install the latest available updates. If an update is installed, see if the issue persists.
Open the Print & Scan pane or Print & Fax (Snow Leopard) pane in System Preferences.
Delete the affected printer, then add the printer again.
If the issue persists, try these additional steps:
Reset the printing system, then add the printer again.
If the issue still persists, reset the printing system again. Download and install your printer's drivers. Then, add the printer again.
Contact the printer vendor or visit their website for further assistance.
Thanks,
Matt M. -
Need suggestions for proofreading online help files
I have created online help docs off an on for many years...
and have contemplated this issue several times and never come up
with a really good answer.
Right now, the product manager is tryiing to proof one of the
online help files that i've COMPLETELY revamped and he's
complaining about the time this is taking and how difficult it is
because not all topics are in the TOC...
so I suppose i could regnerate the TOC and include EVERY
SINGLE topic... but I was wondering if anyone else had any other
suggestions for best practices when it comes to reviewing online
help files.
THANKS for any input you might have.Umm!. I have to admit that I find your approach of adding ALL
topics to the TOC works as well as any. However it does cause
problems where one or more popup topics appear in the same topic.
This causes a bit of uncertainty unless there is a clear indication
in the topic where a popup exists and an understanding of what TOC
topic to look at. What I tend to do is have a piece of text (e.g.
see popup titled xxxxx) which has a conditional build tag on it.
Then you include the build tag when you compile. I also tend to
have all the popups in a separate book in the TOC. You can then
easily remove all the popups from the finalised output. It means a
bit of tossing and turning between TOC chapters but seems to work
reasonably well. You could also produce two printed copies, one
containing the popups and another containing the main topic
content. Hope this helps solve your conumdrum. -
Need Suggestion for the Recurrence appointment design
Hello All,
We are planning to design a feature where doctor can create appointment with the patients on the recurrence basis like Daily, Weekly,yearly etc.
Following features also needs to be present
1. User can edit the recurrence appointment and that changes must apply to all
2. user can go and change the details for the single appointment
We had a discussion for this and identified the below schema to store the details..
TABLE Appointment
AppointmentID,
DocID,
PatientID,
FromTime,
ToTime,
IsRecurrence,
RecurrenceID
TABLE RECURRENCE
SeqID,
RecurrenceID,
FromTIme,
ToTime
So the logic is for each recurrence we will create a entry in table recurrence and will store the details accordingly
Let me know if there is any flaw in this or a better design to achieve this .
Regards,
RajeshI'd do it something like this...
These would be my tables...
CREATE TABLE Appointments (
AppointmentID INT NOT NULL IDENTITY(1,1) Primary Key,
DoctorID INT NOT NULL,
PatientID INT NOT NULL,
AppointmentTypeID INT NOT NULL,
StartDateTime DATETIME NOT NULL,
DurationUnits INT NOT NULL, -- Let's say 15 min blocks...
Frequency VarChar(10) NOT NULL CHECK (Frequency IN ('Daily','Weekly','Monthly','Quartly','Annually')),
NumOfOccurrences INT NOT NULL)
CREATE TABLE Schedules ( AppointmentID INT NOT NULL,
DoctorID INT NOT NULL,
PatientID INT NOT NULL,
BegDateTime DATETIME NOT NULL,
EndDateTime DATETIME NOT NULL)
Then I'd create a stored procedure similar to the following (not I didn't code this as a stored proc so that it would be easier to test)
I've added in-line comments to make it easier to understand...
IF OBJECT_ID ('tempdb..#TempAppt') IS NOT NULL DROP TABLE #TempAppt
CREATE TABLE #TempAppt (
AppointmentID INT NOT NULL Primary Key,
DoctorID INT NOT NULL,
PatientID INT NOT NULL,
AppointmentTypeID INT NOT NULL,
StartDateTime DATETIME NOT NULL,
DurationUnits INT NOT NULL, -- Let's say 15 min blocks...
Frequency VarChar(10) NOT NULL CHECK (Frequency IN ('Daily','Weekly','Monthly','Quartly','Annually')),
NumOfOccurrences INT NOT NULL)
IF OBJECT_ID ('tempdb..#TempSched') IS NOT NULL DROP TABLE #TempSched
CREATE TABLE #TempSched (
DoctorID INT NOT NULL,
PatientID INT NOT NULL,
BegDateTime DATETIME NOT NULL,
EndDateTime DATETIME NOT NULL)
IF OBJECT_ID ('tempdb..#edt') IS NOT NULL DROP TABLE #edt
CREATE TABLE #edt (edt DATETIME)
-- This is the appointment data that you want to add to the database
INSERT INTO #TempAppt VALUES (1,5,5,5,'20120703 17:15:00',3,'Weekly',20)
--Declare the necessary variables andset their values
DECLARE @aid INT, @did INT, @pid INT, @sdt DATETIME, @f CHAR(2), @du INT, @edt DATETIME, @noc INT, @sql VARCHAR(MAX)
SELECT TOP 1
@aid = AppointmentID,
@did = DoctorID,
@pid = PatientID,
@sdt = StartDateTime,
@du = DurationUnits * 15, -- 15 mins per unit
@f = CASE
WHEN Frequency = 'Daily' THEN 'dd'
WHEN Frequency = 'Weekly' THEN 'wk'
WHEN Frequency = 'Monthly' THEN 'mm'
WHEN Frequency = 'Quartly' THEN 'qq'
WHEN Frequency = 'Annually' THEN 'yy'
END,
@noc = NumOfOccurrences
FROM #TempAppt
ORDER BY AppointmentID
-- A little dynamic SQL allows to dynamically create a DATADD function
SET @sql = 'INSERT INTO #edt VALUES (DATEADD(' +@f + ', ' + CAST(@noc AS VARCHAR(5)) + ', ''' + CONVERT(VARCHAR(30), @sdt, 121)+ '''))'
EXEC (@sql)
--select @sql
SELECT @edt = edt FROM #edt
UPDATE #edt SET edt = @sdt
-- Creats a loop that creates the seporate schedule occurances required by the "appointment" data
WHILE @sdt < @edt
BEGIN
INSERT INTO #TempSched VALUES (@did, @pid, @sdt, DATEADD(mi, @du, @sdt))
SET @sql = 'UPDATE #edt SET edt = (DATEADD(' +@f + ', 1, ''' + CONVERT(VARCHAR(30), (SELECT edt FROM #edt), 121)+ '''))'
EXEC(@sql)
SELECT @sdt = edt FROM #edt
END
-- Checks to seeis the newly created schedul conflicts with any pre-existing schedules.
-- If there is a conflict a warning will be displayed and the new data will not be added to the physical tables.
-- If there is no conflict exists, both the Appointments and Schedules tables will be updated.
IF EXISTS (
SELECT 1
FROM Schedules s
INNER JOIN #TempSched ts
ON s.DoctorID = ts.DoctorID
AND (ts.BegDateTime BETWEEN s.BegDateTime AND s.EndDateTime OR
ts.EndDateTime BETWEEN s.BegDateTime AND s.EndDateTime))
BEGIN
SELECT 'There is a conflict with a pre-existing schedule for the doctor'
END
ELSE
IF EXISTS (
SELECT 1
FROM Schedules s
INNER JOIN #TempSched ts
ON s.PatientID = ts.PatientID
AND (ts.BegDateTime BETWEEN s.BegDateTime AND s.EndDateTime OR
ts.EndDateTime BETWEEN s.BegDateTime AND s.EndDateTime))
BEGIN
SELECT 'There is a conflict with a pre-existing schedule for the patient'
END
ELSE
BEGIN
INSERT INTO Appointments (DoctorID, PatientID, AppointmentTypeID, StartDateTime, DurationUnits, Frequency, NumOfOccurrences)
SELECT DoctorID, PatientID, AppointmentTypeID, StartDateTime, DurationUnits, Frequency, NumOfOccurances
FROM #TempAppt
INSERT INTO Schedules ( AppointmentID, DoctorID, PatientID, BegDateTime, EndDateTime)
SELECT
(SELECT MAX(AppointmentID) FROM Appointments WHERE DoctorID = @did AND PatientID = @pid) AS AppointmentID,
DoctorID, PatientID, BegDateTime, EndDateTime
FROM #TempSched
SELECT * FROM Appointments WHERE AppointmentID = @aid
SELECT * FROM Schedules WHERE AppointmentID = @aid
END
Basically it simply takes the appointment info, throws into a temp table, creates a schedule based on that info, validates the schedule based on existing schedules to avoid conflicts.
If there is a conflict you get a warning. If not the appointment gets added along with the schedule.
Once the schedule is created it's a simple matter to go in and manually edit individual occurrences.
If you want to change and entire series, simply delete everything WHERE AppointmentID = ??? AND BegDateTime > CURRENT_TIMESTAMP and create a new appointment.
HTH,
Jason
Jason Long -
Hi please need suggestion for best design for jdbc-rfc-file
Hi Gurus,
actually our scenario is jdbc->XI( <-RFC->)->File
Here our payload is around 5000 records
can it be advisable to use rfc synchronous communication.
The scenario will be exected only in night times.so can we schedule the adapter as we are using sp9.
If not what must be the good design approach.
And also after scheduling to a perticular period ,if there is any down time of XI server,will the process start immediately after the sever up or it will again watch for that perticular time.Hi,
>>>can it be advisable to use rfc synchronous communication.
- No, if there is no business requirement for realtime response.
>>>can we schedule the adapter as we are using sp9
- Not necessary.
>>>Here our payload is around 5000 records
- Is it requirement to send all 5000 records at once?? if not then distribute load whole day if possible.
If you provide more information then maybe we can assist you.
Regards,
Gourav
<i>Reward points if it helps you</i>
Maybe you are looking for
-
Error in object level routine used in transformation to remove special char
Hi, I have written a code to remove special characters (#,!) at the object level. However i am getting this error "You cannot use the current statement between "CLASS ... DEFINITION" and "ENDCLASS" ".How do i remove this error? Please help. Thanks.
-
hi, my daughter wrote wrong paswords in my ipod touch and it is blocked. It says it needs to be connected to itunes, but once its there it says the ipod is blocked with a passcode..the ipod is just blocked. what can I do?
-
Deletion of a line item from PO
Hi, I have a PO with only one line item, where the line item is created with reference to PR and PR is created from Production order. The GR and IR is done for PO. But the line item is marked for deletion after IR. Now i want to undelete the line ite
-
Having trouble passing form values to a data action in 10G
I have a view object that queries the hr.departments table. In the app module, I created a custom method to bind a paramter to the query. I am able to make this work only if I manually enter a value for the paramsNames[0] value for the dataaction. Wh
-
Help with Automatic refreshing
I got this graph that I can slide with my finger, Im wondering if its possible to update it automatic with this code? //Function for sliding graph. protected function mouseDownHandler(event:MouseEvent):void lastX = event.stageX; systemMana