Need suggestion for stock transfer

Hello everyone
I have a situation in our Business where I need some input from you guys.
In our business there are 2 company codes which are 2 small sub units of the bigger brand.
Company code         Sales Org           Distribution           Div                Plant            Storage Loc
0001                            0001                    01                            00                ABCD           0010
0002                            0002                    01                            01 & 02       WXYZ           0020 & 0030
Stor. Location 0010 & 0020 are the Picking locations for the Orders placed for the respective plants..
Now Business unit 0001 has decided to take over the Sales of all items in division 01 of unit 0002. These items henceforth will not be sold by the unit 0002 once 0001 starts selling it.
The Orders for such items will still be fulfilled from plant WXYZ physically. Now physically a small part of the current storage location 0020 is designated as a temporary storage place for the above decided items by unit 0001.
( Now does is sound apt to thus create another storage location 0040 which would hold the inventory of these items owned by unit 0001? )
Now the procurement of these Items will however still be done by the Sub-unit 0002 & hence the ownership of these procured items will remain with 0002 initially. They will be kept in storage location 0030 at this point.
Now 0001 will start accepting orders for these new items which will be fulfilled from say location 0040 of plant WXYZ. The location 0040 will not store any material stock .. its like a temporary halt for the materials which are stored in 0030.
Only an apt quantity of the material stock for these items will be moved from location 0030 to 0040 on a daily basis.
This apt quantity is nothing but the quantity required to fulfill all the order due to be Shipped from the Plant on that particular day.
Once it is in 0040, these Orders can be fulfilled.
Now when we move the stock of these materials from 0030 to 0040 should the ownership of the goods from unit 0002 to 0001.
So finally my main question is what options do I have to carry out this stock transfer which also changes ownership ?
Based on my initial assessment, sounds like Stock Transport Order seems might serve the purpose.
Also as mentioned on the forums, Stock Transport Order is used only when transferring inventory between 2 plants belonging to two different Company Codes.
In our case it is the same Plant with transfer happening between 2 different location.
So from a system stand point I am concerned about how would the change in the ownership take place in our case of Stock Transport Order.
Any help will be appreciated.
Thanks
Vin

There is no need to transfer the stock in MM for this cross company scenario. Simply use the standard SD functionality to ship from one company to fu;fill an order for a customer of another. This uses the IV invoice to transfer the cost (+ any transfer price markup that is applicable. between the supplying and selling companies. The stock remains in the supplying company until sold.

Similar Messages

Proforma invoice not created for stock transfer order

Hi Experts
while creating a proforma invoice for stock transfer order between the plants we are not able to create proforma invoice , the process is replenishment delivery is created and Wm is also done and the billing with reference to delivery and the item category is relevant for billing with value J, and below is the message i get whilw creating invoice
     Technical data
         Tech. data details
          Client
          Group Number
          Sales Document Number
          Item Number of the SD Document         000010
          Schedule Line Number                   0001
          Counter in Control Tables              00
          Message Identification                 00
          System Message Number                  001
          Output Type                            E
          Message Variable 01
          Message Variable 02
          Message Variable 03
          Message Variable 04
          Group Type                             F
No biliing documents generated
Please suggest.
Thanks

This explanation is not in detail and hence I am not clear about your configuration settings.
First go to IMG Logistics-General => Tax on Goods Movements => India => Business Transactions => Outgoing Excise Invoices => Assign Billing Types to Delivery Types.
There ensure that you have assigned the billing type JEX (assuming that you are using the standard) to your delivery type NL.
Perhaps, you can also try with "D" for your item category in Billing Relevance field but I am not sure this will solve your issue. Try in development client.
thanks
G. Lakshmipathi

Problem on creation of Outbond Delivery for Stock Transfer Order

Hi all,
We have problem on the creation of Outbond delivery for stock transfer order because the system doesn't group in a unique delivery for different items of a STO order.
We used VL10B or VL10D but the behaviour is the same. Even if we have to handle few items of the Stock Transfer order already scheduled, the scope is to create a delivery which group everything while the system split in several delivery notes.
Could you advice me the way to set in customizing , master data I don't know where else , the rules in order to avoid to split deliveries for STO.
Secondly if we have already created a delivery note is it possible to add a further purchase order item as in sales order processing?
Thank you for any suggestion you will give
Andrea

Dear Kripa,
the first point has been solved. We have checked a SAP Note 386340 which is appropriate to this case.
The second point, the one referred to the additional items to an existing delivery note, is not yet closed and I would like to know further advices from you and the other guys connected to the forum in order to help us to solve the problem.
Thanks for your help
Andrea

Delivery without reference for stock transfer within the same plant 311

Dear all,
I need to create a delivery without reference for stock transfer within the same plant, movement 311, i.e. just from 1 storage location to another storage location.
I tried to use VL01NO with delivery type UL.
Now my question is how can I assign a receiving plant for a customer?
I can't do the MIGO or MB1B document because I need the delivery document (packing list, forms, Texts,...).
It's possible this option???
Thank you very much.

Hi,
What is the item category you are assigning while doing VL01NO? Check the schedule line category for that item category assignment. That Schedule line category has an option for one step GI. There you can assign 311 or create a separate item category and schedule line category and in that SC assign 311.
Thanks
Krish.

Material Ledger for Stock Transfer Postings

Hi All,
I have a question about the way material ledger is calculated for stock transfer postings (movement type 641). I will give an example to illustrate this issue:
Material A has a Standard cost of $10
Material B has a Standard cost of $8
During the month 100 units were transferred from material A to Material B. This created a financial posting as follows:
Credit Material A -          $1000
Debit Material B -           $800
Debit Price Difference    $200
This price difference of $200 was used in the calculation of Actual cost for material B
However, the Actual Cost for Material A was $9. I would have expected the system to use this actual cost to calculate the difference to be posted to material B. Hence the difference used in Material B should have been $100 {(9 8) X 100} and not $200.
Has anyone had a similar issue, or know how the system resolves this (if at all)?
Points will be rewarded for relevance.
Thanks

Dave, I see that your process is slightly different to mine. We do not revalue inventory at month end, instead the material ledger program posts the revalued amount to a reserve account and the actual cost is only a statistical entry. The material ledger calculation is reversed automatically in the new month and the standard price is used for valuation.
I think this might make it difficult for the system to value STO's at actual. I may need to check with SAP.
Thanks

MRRL - Automatic posting for stock transfer PO

I want to use MRRL for stock transfer.
Please let me know the confirm.
My objective is to reduce the manual IV for stock tranfers.
Regards
Pranav

then why do you need invoice for intra company stock transfer ( Stock transfer between two plants with in same company code).
Invoice is not required in this process.Invoice applicable only Intercompany sto .

Need Suggestion for Archival of a Table Data

Hi guys,
I want to archive one of my large table. the structure of table is as below.
Daily there will be around 40000 rows inserted into the table.
Need suggestion for the same. will the partitioning help and on what basis?
CREATE TABLE IM_JMS_MESSAGES_CLOB_IN
LOAN_NUMBER VARCHAR2(10 BYTE),
LOAN_XML CLOB,
LOAN_UPDATE_DT TIMESTAMP(6),
JMS_TIMESTAMP TIMESTAMP(6),
INSERT_DT TIMESTAMP(6)
TABLESPACE DATA
PCTUSED 0
PCTFREE 10
INITRANS 1
MAXTRANS 255
STORAGE (
INITIAL 1M
NEXT 1M
MINEXTENTS 1
MAXEXTENTS 2147483645
PCTINCREASE 0
BUFFER_POOL DEFAULT
LOGGING
LOB (LOAN_XML) STORE AS
( TABLESPACE DATA
ENABLE STORAGE IN ROW
CHUNK 8192
PCTVERSION 10
NOCACHE
STORAGE (
INITIAL 1M
NEXT 1M
MINEXTENTS 1
MAXEXTENTS 2147483645
PCTINCREASE 0
BUFFER_POOL DEFAULT
NOCACHE
NOPARALLEL;
do the needful.
regards,
Sandeep

There will not be any updates /deletes on the table.
I have created a partitioned table with same struture and i am inserting the records from my original table to this partitioned table where i will maintain data for 6 months.
After loading the data from original table to archived table i will truncating the original table.
If my original table is partitioned then what about the restoring of the data??? how will restore the data of last month???

Report for stock transfer from plant to plant

Hi,
Is there any standard report for stock transfer from plant to plant .
If not is there any enhancements to get the above report.
Regards,
Ravindranath.

Hi Ravi,
U can use the tcode MB51 and their u can give the input as 301 if it is 1 step in the mvt type or use 303 and 305 for 2 step transfer. and generate the report.
if u want the list of stock transport orders then use tcode ME2N and the input parameter as item category "U" and generate the report.
hope it wud have answered ur question
Reward if useful
Shawn

Pending Quantity in PO for stock transfer

Dear All,
I want to know the pending order quantity for stock transfer orders (plant to plant),I have tried
ME80FN,ME2L Etc. but all report are showing the pending quantity only after MIGO done by
the receiving plant.
Our requirement is like this that one plant created one stock transfer order to one
plant and he want to know the actual pending order quantity as on date considering
by deducting stock in transit (5B5T) (i.e. PO quantity 100 pcs - quantity delivered 50 pcs then actual
pending quantity should be 50 pcs but in mentioned report it is showing 100 pcs pending).
Please note in our case in every PO more than 800 line items are there.
Can any one inform me about standard report or any table where net pending quantity are getting
stored.I have checked table EKBE,MARD,MARC.
Regards,
SP Shukla.

Hi,
In mb5b u give movement type & check
Generally i do not think there is a std report, this we also faced, we developed a report with the help of ABAPer
Pandari

Need suggestion for designing a BEx report

Hi,
I need suggestions for designing a BEx report.
Iu2019ve a DSO with below structure:
1. Functional Location u2013 Key
2. Maintenance Plan u2013 Key
3. Maintenance Item u2013 Key
4. Call # - Key
5. Cycle u2013 Data Field
6. Planned Date u2013 Data Field
7. Completion Date u2013 Data Field
This DSO contains data like:
Functional -
Plan --- Item -
Call# --- Cycle -
Planned Dt -
Completion Dt
Location
11177 -
     134 -
     20 -
     1 -
T1 -
     02-Jan-2011 -
     10-Jan-2011
11177 -
     134 -
     20 -
     2 -
T2 -
     15-Feb-2011 -
11177 -
     134 -
     20 -
     3 -
T1 -
     15-Mar-2011 -
11177 -
     134 -
     20 -
     4 -
M1 -
     30-Mar-2011 -
25000 -
     170 -
     145 -
     1 -
T1 -
     19-Jan-2011 -
     19-Jan-2011
25000 -
     134 -
     145 -
     2 -
T2 -
     20-Feb-2011 -
     25-Feb-2011
25000 -
     134 -
     145 -
     3 -
T1 -
     14-Mar-2011 -
Now Iu2019ve to create a report which will be executed at the end of every month and should display the list of Functional Locations whose Cycles were planned in that particular month, along with the last completed Cycle/Date.
Thus based upon above data, if I execute report at the end of (say) March then report must display:
Functional ---     Curr. Cycle --- Planned Date --- Prev. completed Cycle --- Prev Completed Date
Location
11177 -
     T1 -
     15-Mar-2011 -
---     T1 -
--     10-Jan-2011
11177 -
     M1 -
     30-Mar-2011 -
---     T1 -
--     10-Jan-2011
25000 -
     T1 -
     14-Mar-2011 -
---     T2 -
--     25-Feb-2011
Any idea how can I display Previous Completed Cycle and Completion Date (i.e. the last two columns)?
Regards,
Vikrant.

hi vikrant,
You can a Cube at the reporting layer which gets data from DSO and which has these 2 extra characteristics completion date and previous cycle along with other chars and keyfigures from DSO.
You can populate these based on your logic in the field routine.
Hope it helps.
Regards
Dev

Can't create a delivery order for stock transfer #

Hi All
I stuck with one ticket ...
Can't create a delivery order for stock transfer #
Kindly provide input to resolve this.
Thanks

Hi,
Can you tell us as to what is the issue here? What transaction are you using?
Anyways, check below things:
1. Check for the inputs which must be relevant for the delivery creation
2. Check if table VETVG is updated with the STO number.
Please revert back with more inputs if problem still persists?
Regards
SD

Requirement date in reservation for Stock transfer from one storage locatio

Hi ALL,
I have activated the resevration creation by MRP for stock transfer from mail ware house to service storage location by creating MRP area for service storage location when there is requiremnt from service and when MRP is run on the MRP area the resevration in created and trasnfer order is created .but the requiremnt date in reservation is not the same asd of on service order.so kindly let me know why it is ahppening.

Hi,
check the GR processing time for the material . System may be adding GR processing time with reservation requirement to arrive at the service delivery date.
Regards,
Mrinal

Return for Stock transfer

Hi,
I am trying to setup the return process for stock transfer order. To which plant we have to assign the delivery type. Is there any other settings for STO returns.
Thanks
Balu

Hi
Assign the required return delivery type to
purchasing document category F (purchase order),
purchasing document type (NB - standard purchase order, UB - stock transport order),
the supplying plant (the one to which the goods are being returned)
The following return delivery types are available in the system:
NLR - intra-company-code store returns (purchasing document type UB for replenishment and return orders, delivery type NL for the replenishment delivery)
NCR - cross-company-code store returns (purchasing document type NB for replenishment and return orders, delivery type NLCC for the replenishment delivery)
Please do the customizing in SPRO-> IMG-> Materials Management-> Purchasing-> Purchase Order-> Returns Order-> Store Return / Return Plant to Plant
Thanks & Regards
Kishore

No Quality Inspection for Stock Transfer

Hi,
There is a scenario now in which a material is activated for quality inspection. This same material is also used for Stock transfer from other plant with same company.
So if material if received using STO, how can I deactivate Quality Inspection and just transfer to unrestricted use.
Thank You,
Raymond

Hi
check user exit.
QAAT0001 Inspection type determination different from variant 01
You can install enhancement QAAT0001 ,the function modules contained in this enhancement are called up in the
programs in which you can access the master inspection type if necessary.
The inspection lot is then created with the inspection type that was
determined using the enhancement.
logic will be for STO it will consider Z mvt type of origin 08 ,for STO material activate a Z mvt type & do not tick on Post to inspection.
For normal stock trnsfer system will create 08.
I hope this will add some value
Regards'
Sujit

Bapi For Stock Transfer

Dear Gurus,
I have an requirment to develop an RFC for Stock transfer Process..
In this process it involves 4 transactions
1. ME21N
2.VL10B
3.VL02N
4.MB01.
I am using two BAPIs
BAPI_PO_CREATE1
BAPI_GOODSMVT_CREATE for PO creation and for MB01.But I have not found suitable BAPI for VL10B and VL02N.
Can somebody tell me What are the standard BAPIs /RFCs available for above Delivery transactions?(ours is of 4.6c version)
Thanks in advance..
Regards,
Raj

raj,
just check these may these would solve your issue.
Check this function module ME_CHECK_RESWK_STOCK_TRANSFER
Check the below link for sample program BAPI_GOODSMVT_CREATE
bapi_goodsmvt_create
bapi_goodsmvt_create
one more for ME21n:
You can use the bapi: BAPI_PO_CREATE1 as STO is a special case of PO.
Amit.
Edited by: Amit Gujargoud on Jun 30, 2008 4:16 PM

Need suggestion for stock transfer

Similar Messages

Maybe you are looking for