Need suggestion for Unity Connection 9.1(2) alert on SIB failure?

On Unity 8.x I had a monitor on the UnityMTA folder as an easy way of knowing when messages weren't being passed to Exchange.
I'm looking for an alert to notify me on CUC v9.1(2) (SIB) when messages cannot sync with a user's exchange mailbox. I'd like to know of any problems, even just for a single user, before the user knows. Any suggestions?

Unfortunately, I don't think there is any intuitive or simple way to get what you want here. There are Single Inbox Traces via the Connection Mailbox Sync service but you'd then need some sort of automated way to pull/parse that data and I think that would be rather cumbersome.
Hailey

Similar Messages

Licensing for Unity Connection after Upgrade from 8.5 to 9.1.2

I upgraded my Unity connection from 8.5.1 to 9.1.2. ( my CUCM is still on 8.5.1) . I have 200 CUWL-STD ( 2200 DLUs), and 50 CUWL-PRO (850 DLUs) . Now I am working with Cisco to get a license file for Unity Connection and apply that to my ELM. I attached my licensing page for when I was in 8.5.1 . Just want to make sure if I will be getting enough license with that license file, or possibly I need to buy more. Someone told me that if I want to have users with mailbox I need to order more licenses since every user take one CUWL license.
Honestly i do not know how CUWL licensing work regardig to Unity or even CUCM.
Thanks,

Hi,
The following link provides details of licenses usage by diff endpoints on version 9.x
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/upgrade/uct/9_1_1/CUCM_BK_U0AE00F5_00_uct-admin-guide/CUCM_BK_U0AE00F5_00_uct-admin-guide_chapter_0100.html
HTH
Manish

Need Suggestion for Archival of a Table Data

Hi guys,
I want to archive one of my large table. the structure of table is as below.
Daily there will be around 40000 rows inserted into the table.
Need suggestion for the same. will the partitioning help and on what basis?
CREATE TABLE IM_JMS_MESSAGES_CLOB_IN
LOAN_NUMBER VARCHAR2(10 BYTE),
LOAN_XML CLOB,
LOAN_UPDATE_DT TIMESTAMP(6),
JMS_TIMESTAMP TIMESTAMP(6),
INSERT_DT TIMESTAMP(6)
TABLESPACE DATA
PCTUSED 0
PCTFREE 10
INITRANS 1
MAXTRANS 255
STORAGE (
INITIAL 1M
NEXT 1M
MINEXTENTS 1
MAXEXTENTS 2147483645
PCTINCREASE 0
BUFFER_POOL DEFAULT
LOGGING
LOB (LOAN_XML) STORE AS
( TABLESPACE DATA
ENABLE STORAGE IN ROW
CHUNK 8192
PCTVERSION 10
NOCACHE
STORAGE (
INITIAL 1M
NEXT 1M
MINEXTENTS 1
MAXEXTENTS 2147483645
PCTINCREASE 0
BUFFER_POOL DEFAULT
NOCACHE
NOPARALLEL;
do the needful.
regards,
Sandeep

There will not be any updates /deletes on the table.
I have created a partitioned table with same struture and i am inserting the records from my original table to this partitioned table where i will maintain data for 6 months.
After loading the data from original table to archived table i will truncating the original table.
If my original table is partitioned then what about the restoring of the data??? how will restore the data of last month???

Need suggestion for designing a BEx report

Hi,
I need suggestions for designing a BEx report.
Iu2019ve a DSO with below structure:
1. Functional Location u2013 Key
2. Maintenance Plan u2013 Key
3. Maintenance Item u2013 Key
4. Call # - Key
5. Cycle u2013 Data Field
6. Planned Date u2013 Data Field
7. Completion Date u2013 Data Field
This DSO contains data like:
Functional -
Plan --- Item -
Call# --- Cycle -
Planned Dt -
Completion Dt
Location
11177 -
     134 -
     20 -
     1 -
T1 -
     02-Jan-2011 -
     10-Jan-2011
11177 -
     134 -
     20 -
     2 -
T2 -
     15-Feb-2011 -
11177 -
     134 -
     20 -
     3 -
T1 -
     15-Mar-2011 -
11177 -
     134 -
     20 -
     4 -
M1 -
     30-Mar-2011 -
25000 -
     170 -
     145 -
     1 -
T1 -
     19-Jan-2011 -
     19-Jan-2011
25000 -
     134 -
     145 -
     2 -
T2 -
     20-Feb-2011 -
     25-Feb-2011
25000 -
     134 -
     145 -
     3 -
T1 -
     14-Mar-2011 -
Now Iu2019ve to create a report which will be executed at the end of every month and should display the list of Functional Locations whose Cycles were planned in that particular month, along with the last completed Cycle/Date.
Thus based upon above data, if I execute report at the end of (say) March then report must display:
Functional ---     Curr. Cycle --- Planned Date --- Prev. completed Cycle --- Prev Completed Date
Location
11177 -
     T1 -
     15-Mar-2011 -
---     T1 -
--     10-Jan-2011
11177 -
     M1 -
     30-Mar-2011 -
---     T1 -
--     10-Jan-2011
25000 -
     T1 -
     14-Mar-2011 -
---     T2 -
--     25-Feb-2011
Any idea how can I display Previous Completed Cycle and Completion Date (i.e. the last two columns)?
Regards,
Vikrant.

hi vikrant,
You can a Cube at the reporting layer which gets data from DSO and which has these 2 extra characteristics completion date and previous cycle along with other chars and keyfigures from DSO.
You can populate these based on your logic in the field routine.
Hope it helps.
Regards
Dev

COBRAS Import for Unity Connection 8.5 and Subscriber LDAP Integration Status

Using COBRAS Import for Unity Connection 1.1 Build 212 with Unity 4.2 Voicemail Only and Connection 8.5(1)SU1 with LDAP Directory Integration
When I run COBRAS the old alias matches the new alias and my desire is for subscribers being moved to be LDAP inegrated. However after COBRAS runs, the radio box for LDAP Integration Status on the subscriber is set to Do Not Integrate with LDAP Directory. Is there a way for COBRAS to select Integrate with LDAP Directory when the alias matches on LDAP?

Hi ben,
If you are just importing from and not authenticating against LDAP, then the PIN comes
from the Connection Template you used to build the users;
Note that no passwords or PINs are copied from the LDAP directory to the Connection database. If
you want Connection users to authenticate against the LDAP directory, see the “LDAP
Authentication” section on page 9-7.
http://www.cisco.com/en/US/docs/voice_ip_comm/connection/8x/design/guide/8xcucdg040.html
Cheers!
Rob
"Show a little faith, there's magic in the night" - Springsteen

Need suggestion for USB Bluetooth Adapter for HP Z230 Workstation

I've just purchased an HP Z230 Workstation, with an I7 processor. I need to equip it with Bluetooth capability so that I can connect the computer to an old Palm Tungsten T2.
There are gobs of USB 4.0 Bluetooth adapters / dongles on the market, but reading buyer's comments, they all seem to have some type of problem with compatibility or installation issues on something.
Does anyone have a suggestion for a USB Bluetooth adapter that has worked well with the Z230?
Thanks in advance for any help.
Terry
This question was solved.
View Solution.

I suggest joining the Enterprise Buisness forum and posting your query there.
Your HP Z230 Workstation is a business class HP product and not than a consumer class device. This is the HP Consumer support forum.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Need suggestions for upgrading my hard drive...(700 gigs, completely full.)

I like having a large internal drive. I want to buy one of those Western Digita 2 Terabyte SATA drives and put it in.
Problem is, I'd need a way to time-machine the 700 gig drive first. And for that I'd need an external 700gig drive. And a lot of free time.
Any suggestions?

All you need to do is connect an external drive to your iMac and run Time Machine, if you are going to put a 2 TB drive inside your iMac you are not going to get any much larger than 2 TB right now. My recommendation is to rethink the way you store things. I would recommend instead of one large internal drive to get 2 external drives, all being FW 800 for speed. You could do something like this.
External HD #1 used as a bootable clone to the internal drive. This drive does not need to be large, less than 100 GB would be fine. You can create a bootable clone using SuperDuper or Carbon Copy Cloner.
External HD #2, move most of your data from the internal drive to this drive. If you get a FW 800 drive as recommended you will still have plenty of speed and most likely not perceive any loss in performance.
External HD #3, use this as your Time Machine Drive. This doesn't have to be FW 800 but it does make it easier if it is because you can daisy chain all the external drives together.
It's not cheap but it is a more efficient way to work in my opinion.
Regards,
Roger

/RestoreRoutingRule CLI for Unity Connection

I am consolidating several unity 7.2 servers into Unity Connection 8.5.
I have hundreds of routing rules which are in use today which I need to recreate on the Unity Connection server. I read in the COBRAs help that I can run the CLI /RestoreRoutingRules to restore the routing rules which is what I would like to test.
In the COBRAS tool, I can not modify the path name of the backup to include the /RestoreRoutingRules so am just wondering how I do this? If someone can provide a reference or direction on where / how I do this, it would be most helpful.
Thanks.

I'm not sure I understand what you mean by " I can not modify the path name of the backup " - you don't need to - when you run the COBRASImportForConnection.exe, you pass the "/RestoreRoutingRules" option on the command line. So in other words you can open a command box on your Windows machine where you installed import, go to the directory where you installed it (by default C:\Program Files\Cisco Systems\COBRAS\COBRAS Import for Connection\) and run the tool like this:
COBRASImportForConnection /RestoreRoutingRules
it'll then offer you the option to include routing rules in your restore (a seperate wizard page will be displayed during the import for this).
You can also add the CLI option via the desktop shortcut if you'd rather but I usually just open a command box for such things.

Fix for Unity connection bug CSCtl41495

Hi,
I need a fix for this bug but don't see any of the following versions available under Unity Connection download page. The current release I am having is 8.0.3 ES22 and would like to stay on 8.0.3 release.
Fixed-In
8.5(1.0)ES17
8.6(0.99981.1)
8.0(3)ES25
8.0(3.23028.1)
8.6(0.18)
8.6(0.96000.132)
8.6(0.96000.53
Can someone clarify when the next full version 8.0(3.23028.1) would be available for download on CCO? Or can recommend any other version available on CCO which has a fix for this bug. I checked the release notets of available versions, couldn't see it fixed in any of them.
Thanks,
inner_silience

Hi,
This has been ported back to 8.0(3). If you open a TAC case, we can publish you the latest 8.0(3)ES27 that contains the fix.
Hope that helps,
Brad

Wildcard Certifiate support for Unity Connection

Does Unity Connection started supporting Wildcard cerficates for the Unified messaging with Exchange integration?
CUPS 8.6.4 started supporting it for Calendar integration but we are not getting any document related to Unity Connection which states its supported now.
BR,
Sachin

Hi,
Thanks for the question.
Okay so I did some digging and found a few details that will help clear this up.
1. The documentation is wrong and we will be getting it correct as soon as we can. The CUC 9 admin guides states that you need to create an 'External Service' however this configuration has been changed.
2. Yes, Exch 2010 and I'm sure Exch 2013 will be supported. TTS uses IMAP for the connection method and as long as Exch permits IMAP traffic you're good.
3. To configure TTS, of course enable IMAP for Exchange. On the CUC side, you'll need to start with the class of service and check the following "Allow Access to Exchange Email by Using Text to Speech (TTS)". Then you'll need to create a new unified messaging service where you add the details of the Exch server and make sure to check "
Access Exchange Email by Using Text to Speech (TTS)". Then apply that UM service to an end user and test. FYI, when you check the message from the TUI it will be the option of external messages (default option 7).
Let me know if you have any other questions.
Good Luck,
Brad

Need suggestion for new laptop

Hi, everyone I'm needing suggestions. I had a touchsmart tx2z however after nearly 4 years it has bit the dust couldn't be saved after its last crash computer would turn on but screen would stay black and ome of the keys like the caps lock would flash. Computer guys say my motherboard has gone bad. I'm looking for another computer now but would like one that is similar to the hp touchsmart but does not cost a lot of money.

Here is the current line-up of HP Touchscreen Laptops. Prices start at about $650 and go up from there. $650 sounds OK to my for a touchscreen laptop, but price is a subjective item. If these are too rich for you, you could always look at regular laptops.
Please send KUDOs
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

Need suggestion for choosing Java development enviroment

Hi Evereyone,
I am new to Java Desktop Application.I need help on choosing proper Java technologies and development tool.
We have an existing CLIENT/SERVER based distributed control system, which was developed in C++(Server side) and VB(Client GUI).Now we are think of migrating the system to Java platform.
Here is the outline:
We want to create web based application that will run on windows and linux (linux on embedded PC).
The application should be able to support 10 � 100 users at once accessing/editing database.
We will also need to create a communication server that will run on web server P.C. that will communicate tcpip to field panels/log to db, as well as allow web screens to send/receive commands with field panels etc.
Could any one give me some suggestion about it?
I am thinking of Using J2SE 5.0, including RMI, JDBC and Swing for GUI. As for field panels, may choose J2ME.
Thank you very much in advance.

Thanks, zadok .
Actually, I don't have the system requirements neither. All I know is the following outline:
"We want to create web based application that will run on windows and linux (linux on embedded PC).
The application should be able to support 10 � 100 users at once accessing/editing database.
We will also need to create a communication server that will run on web server P.C. that will communicate tcpip to field panels/log to db, as well as allow web screens to send/receive commands with field panels etc."
It is a interview question, which need me to do research and give some suggestions. What I want to know is to figure out what kind of Java technology is necessary for developing this system because I want to make sure I head to right direction.
I know somehow it is hard to give suggestion based on this limited information.
One more thing I was confusing is the server-side architecture.
I need suggestion about sever side architecture:
a. write a dedicated server-side program, which act
as communication server to monitor and control field
panel, also act as server-side applicaiton by using
RMI to communicate with Client-side communication.
b. choose a general web server architecture. Put
everything in server side in Web Server, for example
Tomcat AS container, implementing the Communication
server as Web Service and the request from
Client-side go to Web Server first, then dispatch to
a proper web service.Why did you not include this information in the original question!
Why don't you just use Tomcat?
For your answer, "Why don't you just use Tomcat?", does it mean Tomcat without Web Service will be enough for this system development? Could you give me some detail about it?
Thank you very much, zadok.

Java Version for Unity Connection 7.1

Hi,
We have recently found that the latest Java Version 7 Update 11 when automatically updated on the users PC, the Unity Connection web page does not work when Media Master is used. The controls or menu does not respond.
Windows 7
IE 9.08112.16421
Java 7 Update 11
Does Unity Connection 7.1 only support Java 6 Update 33?
Will there be a patch from Cisco?
Thanks

Hi,
There is a known issue that Cisco Unity Connection requires Java Version 6 update 31 and
earlier to work with. For more information, refer to teh bugs below:
http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCto92753
http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCsw33324
The most stable version we have seen is the Java version 6 update 30 or 31.
Regards,
Tere.
If you find this post helpful, please rate!

I need suggestions for an online trading application

Hi,
I am going to develop an online trading application. I have decided to use JAVA EE 5 and I have read "The Java(tm) EE 5 Tutorial". Because I am a (C++) programmer and new to Java, I need suggestions to start development.
Here is summary of the system in my mind. There will be
a database to store user's information and operations,
a web client for creating and managing user accounts,
a desktop application and web client for users for online trading and
an application client for brokers for risk management.
Here is a sample scenario for flow,
- User wants to create an account
- Company creates an account for user
- user gets the prices and trades via application client (web or desktop)
- system informs dealers and broker via their client platform
- broker perform necessary operations.
Java EE 5 Application model fits the system I am trying to develop but I feel I still need some guidance and there are a few things I couldn't figured out yet. For these reasons I want to develop a prove of concept system and this is the system in my mind.
- A simple database
user (user_id, user_login, user_password, user_name)
stock (stok_id, stok_name)
operation (op_id, user_id, stok_id, op_type, op_amount, op_value)
- A price server
will generate random prices and push new values to registered clients
- A web client to create new users (for admin)
- A web client to display operations of users (for user)
- A desktop application and web client for operation entries (for users)
displays prices coming from price servers, sends users trade requests
- A desktop application client for informing admin about trades (for admin)
when a user buys or sells something, this client notified (user buy/sell something)
What do you offer for this sample system?
Which is the best IDE?
Which Application Server should I use (scalability and speed is critical)?
Which Java EE APIs should I use?
JSP or JSF?
Will I need hibernate?
And so on.. I need some points to start and go.
Thanks for any help.
Ahmet

It wouldn't be an arbitrary track. However, maybe you could make an arbitrary track by dividing the track into segments. Each segment is either a straight line or an arc. These are easy to model the cars' behavior on, because you'll have a straightforward way to determine the direction the car should be facing, and the range to the left and right where the car can stray and still be on the track.

Need suggestions for concurrent reads while deleting all entities

Hello,
we need some suggestions for the following use case, as we cannot seem to find the correct transaction locking combination to meet our needs.
We are using BDB JE 4.1.10, and the entityStore is transactional. In a nutshell, BDB JE is used as a Cache for specific data that is pulled and updated regularly from a source Oracle DB. The application that holds BDB is a realtimel app, and response time is critical.
In order to avoid having to merge (Insert/update/delete) entities for some of the tables that are very static and small (a few hundred records that might change every day or so), we are trying to simply delete all records (with an EntityCursor loop, since there is no 'deleteAll' that we could find) and reinsert all data every 5 minutes, and then committing when the whole process is complete. This should always be very quick, but we are not immune to timeouts from the source Oracle DB, so the transaction can be long.
Ideally, while the delete/insert is happening, we want any concurrent read operations to return the old data (before the delete). We have made a test that locks the updater thread between the 'delete all' and 'update all' methods, so that the delete cursor is closed, but the Tx is not yet commited. We have tried the following for our reader thread:
1- If we get() a deleted entity with a LockMode.READ_UNCOMMITTED, we get a null entity back.
2- If we get() a deleted entity with LockMode.READ_COMMITTED, we get a LockTimeoutException.
We have also considered simply using truncate on the EntityStore, but this requires closing and reopening the DB, so this would not work for our need to always return a value, instantly.
Any ideas, suggestions on how we could do this in a simple manner?
Thanks,
Max

Hello Max,
I understand the issue you're describing.
I think the best performing solution by far is to load the new data into new databases while servicing reads from the old databases. When the load is complete, reads can be diverted to the new databases, and the old databases can then be removed.
Unfortunately, this is easier to do with the base API than with the DPL, because the DPL is managing the underlying (base API level) databases for you.
However, even using the DPL, this approach could be very straightforward if you happen to be keeping this data set (the one that needs to be reloaded) in a separate EntityStore, or you can change your application to do so. If so, you can create a new (empty) EntityStore with a different name and use this store for loading the new data. When the load is complete, divert reads to the new EntityStore object and remove all databases for the old EntityStore.
If this is impractical, please explain, and I'll try to suggest a different solution. If you cannot use a separate EntityStore for this particular data set, then the solution may be more complex.
--mark

Need suggestion for Unity Connection 9.1(2) alert on SIB failure?

Similar Messages

Maybe you are looking for