Need suggestion on restore and recover

Hi,
Need your suggestion on restore and recovery scenario. It is like:
There is
Server A on which there is database with SID= XYZ
Server B on which there is database with SID= PQR
I have taken backup of both databases. Then done cloning/refresh PQR database with database XYZ using RMAN duplicate command.
Now can I create a new database with name JKL at Server B with backup of PQR.
How can I do that.
Can catalog backup piece help me in performing RMAN duplicate command.
My databases are running on 11 R1.
Regards
Arjun Singh

Hi Arjun.Singh,
Now can I create a new database with name JKL at Server B with backup of PQR?You need a target to use the duplicate command in rman.
Is your backup of PQR a image copy?
If so you could use a classic clone procedure to create a new database.
Regards,
Tycho

Similar Messages

TS3694 Can't restore and recover iPhone 4s. Keep getting The iPhone "iPhone" could not be restored. An unknown error occurred (14). Help please!

Please help. I simply connected my iPhone 4s to my Dell laptop (Win 8) which connected to iTunes automatically (which it normally does) and was told that I needed to update my software (I believe for both iPhone OS and iTunes). I tried to update and now my iPhone won't work at all. I just keep going in circles trying to restore and recover and I keep getting the error message: The iPhone "iPhone" could not be restored. An unknown error occurred (14). All I see on my iPhone 4s screen is a cable connector, a little up arrow, and an iTunes symbol--and nothing else works.

http://support.apple.com/kb/TS3694

Error in Check DB after RESTORE and RECOVER

Hi Team,
System was partially restored and recovered due hardware failure.
We had 3 file systems that had to be restored and in one of them we has "/oracle/BWP/sapdata8/temp_2/temp.data2" data file.
After the restore and recovery , the system was up.When ran check DB , the get the below error message and when i checked in DB02 , everytime when trying to see the datafile inside PSAPTEMP , there is a short dump with the same error message listed below.
Database error text........: "ORA-01157: cannot identify/lock data file 256 -
see DBWR trace file#ORA-01110: data file 256:
'/oracle/BWP/sapdata8/temp_2/temp.data2'"
When checked the restore , looks like "oracle/BWP/sapdata8/temp_2/temp.data2'" was not restored.
Kindly help to check how to correct this error. Even my online backup's are failing.

Hello Priyanka,
how did you restore your database?
The temporary files are not included in a backup, because they are not needed for a recovery - that works as designed.
After the recovery you have to add these files again.
If you would have used brrecover for restoring/recovering your database the temporary files would be added automatically.
Check the documentation here:
http://help.sap.com/saphelp_nw70/helpdata/EN/6e/4c37b85dc7f24d88f177396dc45645/content.htm
Now you have to do this manually like this:
shell> sqlplus / as sysdba
SQL> ALTER TABLESPACE PSAPTEMP ADD TEMPFILE '/oracle/BWP/sapdata8/temp_2/temp.data2' REUSE;
Regards
Stefan

Restore and recover Oracle 10g database from tape.

I have a very basic question for restore and recover Oracle 10g database. Our envirnment settings are:
Oracle 10g on Unix, daily database and archivelog backup to Vista NetBackup server. Retention policy is 2. Old backup files are copied from NetBackup server to the tape for record keeping.
I want to restore a database to a point in time. Because our retention policy is setup to 2. The backup files I need have been copied to the tape. So I should ask SYSTEM ADMIN to copy the backup files back to NetBackup server disk or I can ask him to copy backup files to the Unix server that host my Oracle 10g database. Then I can use Rman to do restore and recover. Is this doable? I know normal procedure is to copy backup files I need back to NetBackup server disk, not directly back to database server. Please put your comments here as early as better. I do appreciate your kind help.

853153 wrote:
I have a very basic question for restore and recover Oracle 10g database. Our envirnment settings are:
Oracle 10g on Unix, daily database and archivelog backup to Vista NetBackup server. Retention policy is 2. Old backup files are copied from NetBackup server to the tape for record keeping.
I want to restore a database to a point in time. Because our retention policy is setup to 2. The backup files I need have been copied to the tape. So I should ask SYSTEM ADMIN to copy the backup files back to NetBackup server disk or I can ask him to copy backup files to the Unix server that host my Oracle 10g database. Then I can use Rman to do restore and recover. Is this doable? I know normal procedure is to copy backup files I need back to NetBackup server disk, not directly back to database server. Please put your comments here as early as better. I do appreciate your kind help.For sure it is double work, To copy backup files on UNIX host.
Are you using catalog or nocatalog?
If the backup information is out of retention, Catalog them again also in netbackup.
So that you can able to restore database directly without copying those files to host.

Restore and recover tablespace(s) in another db using RMAN

Hi,
I'm using Oracle Standard edition 11gR2, actually that's why I'm posting this thread because I can't use TRANSPORT TABLESPACE feature.
I need to restore and recover two tablespaces, backed up in source database in another database. The destination db has been duplicated from the source db a couple of days ago so the structure is identical.
I cannot use Data Pump on this specific tablespace, because it causes some strange behavior in our application. So I took a backup from tablespaces and now I'm looking for a solution to restore and recover it in another db.
Is there any command to restore a tablespace from a specific file? I googled a lot and no luck so far..
Any ideas?
P.S: I use controlfile instead of recovery catalog.
Edited by: aLuViAn on Dec 2, 2012 11:55 PM

I have a backup schedule to take daily full backups (twice) and hourly incremental backup. So yes, I have backup!
P.S: I also tried the following:
restore tablespace REG_DATA from 'temp_ERIS0_hjnru4ss_1_1.rman';
Starting restore at 03-DEC-12
using channel ORA_DISK_1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 12/03/2012 12:10:36
RMAN-06509: only SPFILE or control file can be restored from AUTOBACKUPIt's not an autobackup, why oracle thinks so?!
Edited by: aLuViAn on Dec 3, 2012 12:45 AM
Edited by: aLuViAn on Dec 3, 2012 12:47 AM
Edited by: aLuViAn on Dec 3, 2012 12:48 AM

My ipod needs to be restore and I get a error message saying :ipod software update server coud not be contacted.

My ipod needs to be restore and I get a error message saying :ipod software update server coud not be contacted.

Reset the device:
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
If that doesn't help, tap Settings > General > Reset > Reset All Settings
Then tap Settings > General > Software Update
No data is lost due to a reset.

All the time I plug my iPod Shuffle to my iTunes it says it needs to be restore and after I restored it and add music it only skips song after song without playing one completely. What should I do?

All the time plug my iPod Shuffle to my iTunes it says it needs to be restore, and after I restored it and add music, it skips song after song without playing one completely. What should I do?

Hello there, san blasted.
The following page links to the iPod Troubleshooting Assistants. Feel free to review the recommendations for your particular iPod:
Apple - Support - iPod Troubleshooting Assistants
http://www.apple.com/support/ipod/five_rs/
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

My iphone5 died and i try to restore and recover it and get error 40!! please help ! i am really sad !

Hi guys,
Yesterday My iphone died ! and maybe it is funny for you guys but it is like I am loosing my best friend. I read everything i found on internet and tried to restore and recover my phone by computer and in the part that it want to verify my phone with apple it gave me error number 40 !
1.I dont have any firewall.
2.my cable is original
3. my itune is updated.
So i could not fix it and i went to Genius bar(?!?!) and they look at my phone and they said it died and you should pay 260$ to get new phone !! and i already ordered iphone 6 and why should I pay 260$ for one week ?!
Please help me that how i could fix error 40 !
I really appreciate that !

iOS 7 RESTORE ERROR 40

Restoring and recovering and encrypted backup.

Hi,
I'm in the early stages of implementing encryption of RMAN backups using the Oracle Wallet to store the key.
I don't yet have a box to test the restore on but thought I see if anyone has any experience they can share of restoring and recovering encrypted backups?
Some questions I have include at what point does the wallet have to be opened during the restore? Is the wallet opened at the NOMOUNT step by the instance?
Thanks in advance,

Hi,
Before dropping a DB we had taken an RMAN backup.I hope you were in mount mode.
Will RMAN automatically recognize the FORMAT of the backup piece and restore ?No it won't.
First you have to restore a controlfile in nomount mode with:
restore controlfile from '/u04/backup/rmanbkp /02mo9fnc_1_1';
and do alter database mount.
Than you have to run "catalog start with '/u04/backup/rmanbkp'; " so the instance now knows where to find the pieces.
Now you can run a restore database command.
Than open the database with resetlogs.
Regards,
Tycho

Restore and recover Logic 8 after main OS boot disk crash

Hi,
I want to restore and recover Logic 8 and the software i use with it (Apogee Maestro,UAD Quad & Waves plug-ins) to a new boot disk. I have both a back up of the main OS drive on a drive with Time Machine and a disk copy of the main drive (on another) as i had it before the boot disk crashed. My question is which is the best option to take when restoring the OS etc? As I have heard that there is a couple of bugs and issues when restoring via Time Machine. Is restoring via the disk copy a simple procedure? Or, should i reinstall everything completely from scratch and copy back the receipts and authorizations perhaps? Can you point me towards the best link/method to get my setup back on track?
Yours sincerely,
KFK
ps.. i'm using an apogee symphony pci card

Thanks for your reply John, but that didn't do the trick for me. I called Apple's professional audio support. Even though I didn't get the answer I wanted to hear, the support was awesome - the guy was very knowledgeable and helpful. Basically, the error I'm experiencing is a nasty one if it appears with pro apps like Logic. He indicated my only recourse was to re-install Logic. Since I'm on Logic 7, I figured if I have to re-install, might as well upgrade to Logic 8. I'm mid-project right now, so I'm pretty nervous doing that, but not much choice.

HT201412 i updated my i pad 4th gen with ios 8 when the upload finished it kept turning itself off a few weeks later i did a update and now wont turn on i have tried to restore and recover but freezes any suggestions thanks Rick

Hi i have a ipad 4th gen i updated to ios 8.0 after it installed it kept turning itself off. A few weeks later i installed a update for ios it turned itself off and wont turn back on. I have tried plugging it into itunes to restore it recognizes the ipad when i press recover it just freezes and wont restore or recover its just a blank screen there is no power light or anything just blank please help with any suggestions, Thanks Rick.

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Restoring and recovering datafiles in standby database

Hi,
oracle version : 8i(8.1.7.0.0)
os : sun solaris
I have scenerio where i lost some of the datafiles in standby database(physical standby) and i do have standby cold backup 3 months older since database size is 1TB is can i restore the the only lost files from cold backup and recover using archivelog files. since i only lost 4 data files of size 4gb each it will be faster compare to restoring the whole TB size database.
appreciated for valuable inputs.
Thanks
Prakash GR

Normal copy command can do your work:
sys@SANTU> startup
ORACLE instance started.
Total System Global Area 535662592 bytes
Fixed Size                  1334380 bytes
Variable Size             180355988 bytes
Database Buffers          348127232 bytes
Redo Buffers                5844992 bytes
Database mounted.
Database opened.
sys@SANTU> archive log list
Database log mode              Archive Mode
Automatic archival             Enabled
Archive destination            USE_DB_RECOVERY_FILE_DEST
Oldest online log sequence     4
Next log sequence to archive   6
Current log sequence           6
sys@SANTU> host copy D:\APP\SANTOSKU\ORADATA\SANTU\USERS01.DBF d:\
        1 file(s) copied.
sys@SANTU> shu immediate
Database closed.
Database dismounted.
ORACLE instance shut down.
*Renamed the datafile 'D:\APP\SANTOSKU\ORADATA\SANTU\USERS01.DBF' to 'D:\APP\SANTOSKU\ORADATA\SANTU\USERS011.DBF'*
sys@SANTU> startup
ORACLE instance started.
Total System Global Area 535662592 bytes
Fixed Size                  1334380 bytes
Variable Size             180355988 bytes
Database Buffers          348127232 bytes
Redo Buffers                5844992 bytes
Database mounted.
ORA-01157: cannot identify/lock data file 4 - see DBWR trace file
ORA-01110: data file 4: 'D:\APP\SANTOSKU\ORADATA\SANTU\USERS01.DBF'
sys@SANTU> host move d:\USERS01.DBF D:\APP\SANTOSKU\ORADATA\SANTU\
sys@SANTU> shu immediate
ORA-01109: database not open
Database dismounted.
ORACLE instance shut down.
sys@SANTU> startup
ORACLE instance started.
Total System Global Area 535662592 bytes
Fixed Size                  1334380 bytes
Variable Size             180355988 bytes
Database Buffers          348127232 bytes
Redo Buffers                5844992 bytes
Database mounted.
ORA-01113: file 4 needs media recovery
ORA-01110: data file 4: 'D:\APP\SANTOSKU\ORADATA\SANTU\USERS01.DBF'
sys@SANTU> recover datafile 'D:\APP\SANTOSKU\ORADATA\SANTU\USERS01.DBF';
Media recovery complete.
sys@SANTU> alter database open;
Database altered.
sys@SANTU>N.B. I have not done the demo on standby database.
but just i want to know is this procedure is valid that is instead of taking the lost datafiles from production can i use lost datafiles from standby database to recover other standby database.That would be fine.
Regards,
S.K.
Edited by: Santosh Kumar on Oct 8, 2009 11:09 AM

Phone says it needs to be restored and to connect to iTunes to restore. Emergency calls only. But nothing happens when i connect it to iTunes. What's going on?

Why can't I restore my iphone 4. it says to connect to itunes to restore and emergency calls only. But it doesn't restore.

Reboot your computer
Connect the USB end of the cable to a USB port directly on the computer, not a hub
Disable your firewall and antivirus
Launch iTunes
Disconnect the phone from the other end of the cable
Hold the HOME and SLEEP buttons until the screen goes black, then release the SLEEP button but contiune holding the HOME button
Connect the cable to the phone while still holding HOME
Wait for iTunes to recognize a phone in "recovery mode", then release HOME and your phone should restore.

Restoring and Recovering in high availability

In Log Shipping, the Secondary Database is in STANDBY or RECOVERING state
In DB Mirroring, the Mirror Database is in
RESTORING state
What is the difference, when almost the same task is carried out in both cases ???
Kind Regards,
Hunt_SQL

In log shipping, there are two restoring mode one is
Standby/readonly ->Here the database allows connection only for pulling the report(like select) not like an DML.
No recovery --> the database will not be available to the users, only time you can bring online if primary database as issue or some maiteance purpose.
so incase if you are talking about how the data trasfers- then that would be differnt-
In Logshipping --actually your SQl agent will have control & what the schedule you have mentioned in order to backup the transaction logs (backup job)-Keepit sharedfolder(Copy)-then secondary will pick those & will get restore(Restore job)
this is how your data will be upto date but the dataloss will be there what ever the frequency set for this.
Incase of mirroing-
The Secondary database will be always restoring -consider your Mirror -how you look similar way it look. --It will not allow any connections or changes to Made.
All you need to do an Primary side.
You can bring the secondary if any known maintenace needed to do so or any switch role happens.
The data usually moved over the N/w & that what we say in the send(Log records will get genrates) queue(Primary side) to redo queue(secondary side)
There are lot more in mirroring interms failover other--but Cuted here not to confuse.
ref-
http://stackoverflow.com/questions/14447847/log-shipping-why-would-you-choose-no-recovery-mode
Database mirroring-
http://technet.microsoft.com/en-us/library/bb934127%28v=sql.105%29.aspx
Thanks, Rama Udaya.K (http://rama38udaya.wordpress.com) ---------------------------------------- Please remember to mark the replies as answers if they help and UN-mark them if they provide no help,Vote if they gives you information.

Restore and recover

Hi all,
When I restore my datafiles, controlfiles and spfile
do I have to recover them also?
Thanks

When I restore my datafiles, controlfiles and spfileit depends when you took the last backup
do I have to recover them also?need recovery if operations are carried out after taking the backup.
Controlfile,spfile dont need recovery.
Thanks

Need suggestion on restore and recover

Similar Messages

Maybe you are looking for