Need suggestion on the entire hardware specs for running Oracle VM 2.2.2

Hi,
I need some suggestion on the preffered hardware specs which can be given to a customer, he wants to run Oracle VM 2.2.2 or Oracle VM 2.2.1.
He has already used Cisco UCS with NetApp storage for OVM 2.2.2/2.2.1 and has being unsucessful with lots of issues creeping up. Thus now need suggestion on the hardware spec which is well tested and works fine with Oracle VM 2.2.2/2.2.1 and he wants to run Oracle Fusion Middleware on top of it.
Any poniters to it will be highly appreciated.
Regards,
Sk

887469 wrote:
Hi Avi,
thank you for that information !
Yes. But only for the UCS gear that uses the converged FCoE adapters. If you have standard Ethernet/FC adapters, then it should be OK.We do use the "M71KR-Q QLogic Converged Network Adapter" with UCS. According to you this is an unsupported combination together with OVM 2.2.1, right ?
Now the "Oracle VM 2.2 Validated Configuration Details" shows UCS B200 M1 with M71KR-Q as a valid configuration. Does 2.2 mean OVM 2.2.0 and this is supported, but 2.2.1 / 2.2.2 is not ?
Please clarify since this confuses me.
Best Regards and TIAAny news for me, please ?
THX

Similar Messages

  • Recommended hardware specs for Reader in Android

    What is the recommended hardware specs for Reader in Android? I would like to have smooth scrolling experience for scanned pdf ebooks with mathematical equations, images and graphs. Also keep the price low on my new tablet. Thank you.

    Getting one of the latest devices would obviously give you the best performance, but any device which supports Android 4 or above should be good enough.

  • Hardware specs for Upgarding SAP 2005 to SAP 8.8

    Hello Experts,
    Currently we are going to upgrade SAP 2005B to SAP 8.8, hence in view we are also going to change our harware requirement.
    In my company there 30 users which are connecting SAP through Branch remotely, and other 40 users which are using SAP throuhg Local LAN.
    Hence any one here can suggest me better hardware configuration for such type of scenarion.
    I have maintained one server for SAP Database and another one for SAP App Server.
    Kindly suggest me the appropraite hardware specification for the same.
    Regards,

    Hi ANkit,
    if it is showing error during pre check wizrad, it will be showing SAP note number in front of  that error. check the note number details .
    Thanks,
    Neetu

  • My disk utility will not let me highlight jornaled in mthe drop down menu. I need to erase the entire mac for re sell purposes.

    My disk utility will not let me highlight journaled in the drop down menu. I need to erase the entire mac for re sell purposes.

    You need to be booted from another source as you cannot delete or reformat the drive you are booted from. See if you can either use the original install disks (Snow Leopard or earlier) or internet recovery (Lion or later) to boot from and then be able to use the Partition tab to partition and format it correctly.

  • I need to delete the entire browsing history so when i type in a webpage it soes not bring up previuosly visited sites.  deleting the history does not do this.  any one know how to do this

    I need to delete the entire browsing history so when i type in a webpage it soes not bring up previuosly visited sites.  deleting the history does not do this.  any one know how to do this

    Judy-
    If Private Browsing doesn't do it, try Settings-Safari-Advanced-Website Data-Remove All Websitre Data.
    Or changing Settings-Safari-Autofill to OFF.
    You might also try Settings-Safari and Clear History and Clear Cookies and Data.
    As you can see, there are several controls for Safari.  Which one works depends on what your problem is.
    Fred

  • "You may need to enter the name and password for an admin" ....

    Hi everyone!
    I'm getting this error when trying to copy files over to a network drive. First, it'll pop up and say:
    "You may need to enter the name and password for an administrator on this computer to change the item named"
    At the same time, it will create an empty file on the target drive. When I click "Continue", it asks me for my username and password, which I happily enter. At that point, it errors out and says "The operation cannot be completed because an item with the name "xyz" already exists".
    I've tried repairing permissions, chmod 777'ing a file, etc. It did work for a short time (it seemed to work while I was at work, but once I arrived home, it quit working and hasn't worked since.) I've tried rebooting as well.
    Does anyone have any suggestions? I'm really puzzled over this!
    Thanks!

    Actually I get some other errors as well:
    "You may need to enter the name and password..."
    Then I click continue...
    "The item "filename" contains one or more items you do not have permission to read. Do you want to copy the items you are allowed to read?"
    I click continue...
    "The operation cannot be completed because you do not have sufficient privileges for some of the items."
    I am copying a text file made from textedit. I have logged into the shared drive on my iMac. I get the same errors coying to my own user folder. Same account on both machines.
    But it does copy a blank version of the file to the drive and adds the .txt extension to it. Then I can delete it from the share.

  • How can i get or download the apple hardware test for a macbook pro made in 2012 running Mavericks 10.9.3

    Does anyone know how can i get or download the apple hardware test for a macbook pro made in 2012 running Mavericks 10.9.3. Thanks.

    Sean and Andy -
    I have to agree with Andy here. I am having the same problem on a mid 2010 MBP (6,2). I have already read the AHT info provided by Sean's link, and they are less than helpful. I'm sure they will be helpful to those who find that they work, but they are confusing if this is not the case. For example, my MBP(6,2) came with ONE (not two) installation disks, so the instructions don't work for me. Another issue is the instructions confound the descriptions related to the MBP, the original (delivered) software (OS X version), and the current installed OS X upgrade software.
    So here's what does NOT work for me... 
         (A) I cannot install 'Disk 2', since I never received this with my original (new) purchase in mid 2010.
         (B) I have checked my firmware versions and they are all up to date, as per Apple's information.
         (C) As suggested in another thread, I looked for /Library/Core Services/.diagnostics and it was NOT present. I followed his instructions, downloaded the correct (I believe) dmg, and installed it. It is in the correct place, and I can see all the invisible files using Pathfinder.
         (D) When I re-start holding down the D key (immediately), it just goes through the normal boot routine; no evidence of AHT.
         (E.1) When I re-start holding down OPT-D, I get a spinning globe, and then it prompts me for a network (wi-fi) connection.
         (E.2) For some unknown reason, the prompt identifies between 2 and 5 of my --neighbors'--  routers, but does not show mine. (??!!)
         (E.3) The routers are listed alphabetically; however, my router SHOULD be at the top of the list by this criterion, but it is nowhere to be seen.
         (E.4) The 'internet recovery' process then allows me to enter a network name AND password. I do this, for my current wi-fi router, and the process rejects it as an incorrect login ID. It is NOT an incorrect login ID! 
    So, now asking Sean and Andy (or anyone else) for further suggestions... ???  As Andy suggested, many people ask questions here because they have -already- worked through the 'official' recommendations, and have found them to be inadequate.
    Any advice would be appreciated!  TIA.
    Ed

  • The swf tag spec for tag type 41 and 63?

    Hi.
    Where can I find the swf tag spec for tag type 41, 63?
    I made the tag type list by reading the SWF file format
    specification
    http://www.adobe.com/devnet/swf/pdf/swf_file_format_spec_v9.pdf
    tag type:
    0: End
    1: ShowFrame
    2: DefineShape
    4: PlaceObject
    5: RemoveObject
    6: DefineBits
    7: DefineButton
    8: JPEGTables
    9: SetBackgroundColor
    10: DefineFont
    11: DefineText
    12: DoAction
    13: DefineFontInfo
    14: DefineSound
    15: StartSound
    17: DefineButtonSound
    18: SoundStreamHead
    19: SoundStreamBlock
    20: DefineBitsLossless
    21: DefineBitsJPEG2
    22: DefineShape2
    23: DefineButtonCxform
    24: Protect
    26: PlaceObject2
    28: RemoveObject2
    32: DefineShape3
    33: DefineText2
    34: DefineButton2
    35: DefineBitsJPEG3
    36: DefineBitsLossless2
    37: DefineEditText
    39: DefineSprite
    43: FrameLabel
    45: SoundStreamHead2
    46: DefineMorphShape
    48: DefineFont2
    56: ExportAssets
    57: ImportAssets
    58: EnableDebugger
    59: DoInitAction
    60: DefineVideoStream
    61: VideoFrame
    62: DefineFontInfo2
    64: EnableDebugger2
    65: ScriptLimits
    66: SetTabIndex
    69: FileAttributes
    70: PlaceObject3
    71: ImportAssets2
    73: DefineFontAlignZones
    74: CSMTextSettings
    75: DefineFont3
    76: SymbolClass
    77: Metadata
    78: DefineScaleGrid
    82: DoABC
    83: DefineShape4
    84: DefineMorphShape2
    86: DefineSceneAndFrameLabelData
    87: DefineBinaryData
    88: DefineFontName
    89: StartSound2
    And I found there are some unexplained tag types.
    Escpecially, I need the spec for tag type 41 and 63
    because those tag types exists in air files of my application
    which I built with the Flex Builder 3.
    Thanks in advance.

    I've found this: http://opensource.adobe.com/svn/opensource/flex/sdk/trunk/modules/swfutils/src/java/flash/ swf/TagValues.java

  • Why do i need to enter the credit card information for downloading free apps and redeem the codes?

    getting a message says apple id has not yet been used with the itunes store while trying to download apps
    why do i need to enter the credit card information for downloading free apps and redeem the codes?

    As a security precaution, Apple verifies your billing credentials with every transaction whether paid or free apps or using the balance of a redeemed code.

  • "You may need to enter the name and password for an administrator"

    I am suddenly getting this message when I try to copy a file from my new Macbookpro to my Powerbook running 10.4.9.
    "You may need to enter the name and password for an administrator on this computer to change the item named "file i am trying to transfer". stop continue
    I hit continue and get the error message: "The item "that I am transferring" contains one or more items you do not have permission to read. Do you want to copy the items you are allowed to read?
    I say continue and get the error: "The operation cannot be completed because you do not have sufficient priveleges for some of the items."
    My network was working fine until today. I can copy fine to all other computers on my network. But not this one.
    If I initiate a transfer from the Powerbook, everything works fine.
    Ideas?

    I experience the exact issue between a macbook pro and an iMac.
    I can access the files locally on my macbook, copy them on usb-stick, etc.
    but ... when I try to copy the files to my iMac ... it fails with the sequence of questions you mentioned.
    However!
    I can copy whatever I like from my macbook if I use my wifes account.
    So...
    Imho there is a problem when the SAME account is used on both systems.
    In my case, I copied my account from the macbook to the (new) iMac.
    Mac OS X seems to be confused when the same accounts are used.
    Does this makes sense?
    All help welcome.
    Luc

  • Need to know the roll and responsibilty for AP,PO etc module for users

    Hi All,
    I need to know the roll and responsibilty for AP & purchase module etc for all the users, I have to give all the details for auditing.
    Thanks,
    Edited by: Quadri on Mar 9, 2010 11:39 PM
    Edited by: Quadri on Mar 9, 2010 11:41 PM

    Hi,
    execute the below query to find the details with application name
    SELECT distinct
    B.RESPONSIBILITY_ID,
    A.RESPONSIBILITY_NAME,
    A.LANGUAGE,
    B.RESPONSIBILITY_KEY ,
    B.APPLICATION_ID,
    C.USER_MENU_NAME,
    E.APPLICATION_NAME
    FROM APPS.FND_RESPONSIBILITY_TL A,
    APPS.FND_RESPONSIBILITY B,
    APPS.FND_MENUS_TL C,
    APPS.FND_MENUS D,
    apps.FND_APPLICATION_TL E,
    apps.FND_APPLICATION F
    WHERE A.RESPONSIBILITY_ID(+)=B.RESPONSIBILITY_ID
    AND B.MENU_ID=C.MENU_ID
    AND B.MENU_ID=D.MENU_ID
    AND E.APPLICATION_ID=F.APPLICATION_ID
    AND F.APPLICATION_ID=B.APPLICATION_ID
    AND A.LANGUAGE='US'
    Regards

  • TS2758 I need to know the correct account settings for my mail on my Iphone 3G please

    I need to know the correct account settings for my mail on my Iphone 3G please?

    How would anyone here know the correct settings for your mail account?

  • Need to download the original ps cs6 for mac

    need to download the original ps cs6 for mac as I lost my owned copy.    I am the register license holder of the copy.  Where can I do so.  Not looking for the cloud version.

    http://prodesigntools.com/adobe-cs6-direct-download-links.html
    Please follow the download instructions carefully.

  • Do we need to buy the license from SAP for EACH 'Z'form

    Hello
    I heard that, we (company) have to take license for the development of EACH adobe interactive form (even though its totally custom brand-new interactive form created from scratch), on individual form basis, is it true? (i know, its free of cost to play around with interactive forms in DEV and QA, but, if we want to move them to PROD, in that case do we need to buy the license from SAP for EACH form individually?)
    Thank you

    Thats true...license based on end user usage is required for SAP interactive forms. For more information read SAP note number 750784. The license comes in package like per 1000 users one time payment.
    Regards,
    Vaibhav

  • Pls can any one suggest me the Existing Report Name for Active and InActive

    Hi all ,
               pls can any one suggest me the Existing report name for displaying Active and inactive vendors .
    Rgds
    Rafi .

    hi,
    my transaction is VL02N change outbound delivery.

Maybe you are looking for