Need Suggestion to update existing EMP and ASG Numbers

Hi All,
Oracle E-Business Suite 11.5.10.2 version
Live with HR,Payroll,GL,Payables,Purchasing, Receivables,Order Management
Oralce DB 9i
Legislation: US
State mandates that no social security numbers should be
electronically transmitted outside the system. Since we have
Employee Number set as "Use National Identifier Number" in Business
Group definition, both Employee number and Assignment Numbers are
generated with National Identifiers. In most of the reports, alerts,
data files we use Employee Number/Assignment Numbers and
electronically transmit them to third parties.
This is the reason why we want to change the existing Employee
Numbers and Assignment Numbers to use Automatic Sequence numbers
rather than National Identifiers.
If anyone have done this earlier, could you please share your
experience with me. What is the best practice/solution to approach
it.
Thanks,
Sridhar

Hi,
Have you handled the case of modifying the existing users in your scheduled task or in OIM. How will the OIM know whether the user coming from flat file is an existing or a new one. If you have not, then first try to find the user and update it
This is the plain GTC Flat File connector and I have not done any configuration in OIM to determine whether user is an existing user or a new user.This connector is able to create new user successfully .
Please provide information about what are all the steps needed to configure for updating an existing user
Regards,
Madhu

Similar Messages

I have updated to Lion OK. Do I need to download updates to Pages and Numbers as well?

I have updated to Lion OK. Do I need to download updates to Pages and Numbers as well?

Only if they show up in Software Update.

Iphone 3gs need activation after update by itune and no service

iphone 3gs need activation after update by itune and no service
what can i do ?

No need to Multiple post... see your other Thread...
https://discussions.apple.com/thread/5846382?tstart=0

Need assistance to update Photoshop cs6 and Lightroom to version 2014. Please help!

Need assistance to update Photoshop cs6 and Lightroom to version 2014.
I have a Mac. I am not a member in Creative Cloud, invested big and bought CS6 and LR in the beginning of last year.
Please help!

These are not updates (just as CS6 was not an update to CS5), but upGRADES. They are available to CC (Creative Cloud) subscribers. While in the past you might have been able to pay for an upgrade (e.g. CS5 to CS6) you now have to subscribe. Once you are a subscriber you can upgrade to each new version as it comes along.
As well as the full CC subscription there is a $10/mo plan with only Photoshop and Lightroom. Creative Cloud Photography plan | Adobe Creative Cloud

Why wont itunes download onto my computer? I need it to update my ipad and use cloud etc

I keep trying to download itunes onto my computer as I need it to update my ipad and use cloud etc. I phoned apple support and they could not work out why it will not download on my computer. I am going into the apple shop to get help but just wondered if anyone else has this problem, the only thing I can think of is that my internet connection/broadband is very slow. Anybody any ideas?

What web browser are you using? Maybe the browser stopped the download of iTunes.
Try downloading iTunes again with another browser -> http://www.apple.com/itunes/download/

Profit centre needs to be updated in Vendor and Customer line item reports

We are using ECC 6.
Profit centre is updating for vendor and customer line items in document level. But the same is to be reflected/updated in profit centre field in FBL1N and Reports.

hi
Use this T codes you will get Profit center wise S_AC0_52000888 Paybles (vendor balances )
Tcode for Profit center wise receviables S_AC0_52000887 (customer balances )
Regards
Babu.k

Updating Existing Install and adding extensions via Group Policy

We have recently installed StarOffice 8 due a full planned move away from Microsoft Office 2003, we have deployed the CD install via group policy to test the functionality of StarOffice in a school environment. Due to a problem cropping images in Writer (cropooo 0.2.1 extension needed) we are having to update to the latest patch ver10 (300+pc's). Is there a way to automate this via GPO? We only have the standard version of staroffice 8 and not the enterprise CD so we can not make a custom transform file. Also can extensions be deployed via Group Policy? We are runnning a Windows 2k3 server with XP clients.

Network Deployment of Adobe Flash Player
I found this link http://www.adobe.com/devnet/flashplayer/articles/flash_player_admin_guide.html
It is a good idea to extract the msi the deployment data point using msiexec /a {filename} (this creates an administrative installer)
Use the extracted MSI to deploy flash. (either assigned or published)
Please make sure that the user can read from the data point you place the files.

I Need Suggestions On Capturing, Timeline Settings and Final Rendering

Okay folks, this is me confused! I've been editing videos for the past two years and that isn't saying much as I've only trained myself through trial and error and reading manuals. I simply pretend that I know what I am talking about:) I have purchased the 5D Mark II and have FCP7. I think I'm doing okay, but I know there must be a better way of doing things and need help in doing so.
I film 1920x1080 30fps. I capture my footage with the default settings on the EOS disc that comes with the camera (works great), then I run my footage through MPEG Streamclip and convert them to XDCAM HD 30. From there I allow FCP to auto set the timeline to match the footage and then I edit away. So far so good and I'm really not complaining. However, since I have been making things up as I go along for so long, I have several missing pieces to my understanding of best quality film. I've been trying to figure out the use of ProRes codecs. My limited understanding (what I've heard and read) is that ProRes provides some of the highest quality. So my question is, should I then scratch the XDCAM codec conversion and go straight to ProRes, then edit ProRes and then final render as such? I'm confused because there are people that have said that you should edit in a lesser format and then render in the higher quality of ProRes since ProRes takes up more space on the hard drive (bigger files), yet, when I read official info on ProRes, the claim is that the files are small. So there is confusion number one. Then, confusion two, is if I edit in XDCAM or ProRes, what then? Meaning, is it best to send to compressor upon rendering or do I send it to QT or QT Conversion and then send that file to Compressor, or do I leave it at that and send to DVDSP? I know this is elementary, but all the conversations that I have found seem to be based on the understanding that I should already know this. So, I'm embarrased to say, I don't know, "this".
I have however, taken an edited a XDCAM timeline and then changed the Render Setting to ProRes and sent it to QT or QT Conversion (I can't remember which one sorry). The video had some text at the very end, and it looked incredibly jagged (no bueno). So I know that I was assuming or doing something wrong, and my "trial and error" has run its course as I have nearly run out of time. Therefore, I call upon the Discussion Board for help.
To sum up my questions:
1. Should I convert to ProRes to begin with instead of XDCAM?
2. Do I edit in ProRes and what should I make the settings for the Sequence (or should I allow FCP to auto select based on video files settings)?
3. What next? Do I send that sequence to QT, QT Conversion or to Compressor? If QT or QT Conversion, should I send it to Compressor after that?
4. What should I have my settings be over all on my Sequence?
I hope I'm not too annoying with my questions, and any help would be great.
Thanks,
Crayton

1. Yes, absolutely. By immediately converting to a long gop format you are throwing away TONS of information.
2. Auto-select. By all means match clip and sequence settings
3. You haven't said what your deliverable is, so can't advise you how to export.
4. See #2.
Pro-rez will be larger files than what you are getting from the camera. Get used to it, drives are cheap.

Need suggestions in doing my Init and Deltas

Hello Experts,
I am using the standard SALES OVERVIEW cube to store the sales data. I have introduced the custom built ODS to store the order level data in my flows. I am about to test my flows but I am afraid if the custom built ODS in the flows will create any problem while doing deltas as the standard Datasources are designed to update the cube directly.
One more thing is, If I do the init and deltas now for my testing, is it possible to delete all the data from ODS and the cibe and do the init again and start the deltas? Will the custom ODS be a problem in such scenarios? I am assigning the 0RECORDMODE to 0STORNO in the transfer rules.
Rgds,
Nene.
Message was edited by:
Nene BW

Hi
You can test init and delta loads in both the ODS and Cube
You can later on delete all the requests in the ODS and cube if you want to
init again
Assign points if useful
Regards
N Ganesh

Need suggestion of architecture of landscape and relation to scenario

Dear experts,
We have created few inbound and outbound scenarios and linked it from ECCQAS - SAPPO.
Now we are asked to link from ECCDEV - SAPPO in same server maintaining ECCQAS - SAPPO .Is it possible that two R/3 systems interact
exclusively as desired.I hope we need to create separate communication channels in this case.
What's the best way could this be done ?

Hi,
Please have a look at Re: Can SAP CRM system point to different PI systems
Kind regards,
Dimitri

Need help. i updated to ios8 and i am stuck in activating the phone.

I updated my Iphone5 to IOS8 and now i am stuck in activating the phone. i bought the phone directly from my provider.

Hi there elmafromjeddah,
You may find the troubleshooting steps in the article below helpful.
Get help activating your iPhone
-Griff W.

I need to find out my "nic" and "lan" numbers

i have a power mac g4 dual 1.25. i am currently running 10.3.9. My service provider needs to know these numbers so that I can get reconnected to dsl connection-ethernet. i thank you in advance for your help

To find these numbers, choose About this Mac from the Apple menu and click on More info. Once the System Profiler has opened, look at the Network section for items in the form 12:34:56:78:90:ab(NIC address) and ###.###.###.###(IP address); if there are several numbers in the second form, the first one will be your internal IP address.
(12153)

How to only update existing records when loading master data ?

Hello experts, I need your lights one more time.
Here is my need :
I have created an infoobject (IO) which is a very simple version of 0material, let's call it Znewmat --> Znewmat has material type and trademark as attributes, those two fields are available in 2 different datasources :
- 0MATERIAL_ATTR for material type (field MTART)
- 0MAT_SALES_ATTR for trademark (field MVGR2)
When loading my new IO from 0MATERIAL_ATTR I use a filter (at DTP level) to get only a few material types (I get something like 1000 records),
here is my issue : when I load from 0MAT_SALES_ATTR the field "material type" is not available to keep the same filter as for 0MATERIAL_ATTR and existing records are updated with the trademark, but I also get 5000 records I don't need, and my master data is "polluated" with useless lines.
*and my question : is there a way while performing the second loading to ONLY UPDATE EXISTING RECORDS AND NOT ADD ANY
NEW RECORDS ? (i didn't find anything in main options of my DTP)*
(I'd like to avoid the solution to update the 0MAT_SALES_ATTR datasource to add the missing field)
Thanks in advance for any help, points will be distributed.
Guillaume P.
Still no idea ?

in the start routine of transformation from 0MAT_SALES_ATTR to znewmat do the following:
select materials from /BIC/PZNEWMAT into i_mat
for all entries in source_package where material eq source_package-material.
loop at source_package.
p_ind = sy-tabix.
read table i_mat with key material = source_package-material.
if sy-subrc ne 0.
delete i_mat index p_ind.
endif.
this way you'll only update records that have previously been loaded by 0MATERIAL_ATTR DS
loading sequence:
first load ZNEWMAT from 0MATERIAL_ATTR. then activate ZNEWMAT. then load 0MAT_SALES_ATTR to ZNEWMAT.
M.

TS3367 This doesn't help me I updated my iPhone and the FaceTime app is missing. How do I during it back !! PLZ HELP ME PLZ POZ !!

I need help I updated my phone and when It was done updating if centime was missing and when I ask Siri to upend it she says I have to make an account how do I do this if i don't have the app plz help me apple

Any restrictions set up for FaceTime in Settings/General/Restrictions? If yes, disable them.
Also, there are carriers that don't support FaceTime.

Listing existing properties and refnums for a control

I'm relatively new to LabView programming and this is probably a basic question. I need to list the existing properties and corresponding refnums for a custom control that was created before I started maintaining an existing application. I would like the information in a form I could print if possible. Thanks for any help.
Mel
Solved!
Go to Solution.

Hi Hootowl,
ok, it's a cluster of several subitems. So you can use standard property nodes to get the properties of each sub-item programmatically.
Otherwise you can list the properies of the (standard) sub-items as they are listed in the LabVIEW help...
Or what else do you need? What's the goal of listing all the properties? (As said before, the cluster contains standard elements and all their properties are listed in the LV help...)
Message Edited by GerdW on 07-09-2009 09:08 PM
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome
Attachments:
Untitled 1.vi ‏27 KB

Need Suggestion to update existing EMP and ASG Numbers

Similar Messages

Maybe you are looking for