Need suggestion whether to use ATM or MPLS in DSL implementation

Presently i am working in ISP, and we are providing internet access via simple dialup, ISDN and IVS. and now we want to implement DSL i ve talk with few peoples regarding whether to use ATM or MPLS in DSL implementation but because they are solution providers so i think they are giving me expensive solution. as long as i know about this is,whole world is shifting from ATM to MPLS Technology. ATM implementation cost is very high. so i need suggestion from u because you also have practical exposure.

I believe ATM is soon getting obsolete...

Similar Messages

I want to set up the Time Machine and I would love to use the Time Capsule but since I already have a wireless router I need suggestions on what other external disks Apple could recommend to use with the Time Machine and how to configure that disk

I want to set up the Time Machine and I would love to use the Time
Capsule but since I already have a wireless router I need suggestions on
what other
external disks Apple could recommend to use with the Time Machine and
how to configure that disk.
A complication that I need to resolve is the fact that I am using Vmware
Fusion to be able to use Windows on my Mac. Now it seems that Time
Machine is not backing up my files
on that virtual Windows without additional configuration and my question
is whether you can advise me here or whether this is only a matter for
the Fusion virtual machine.

If you want to use Time Capsule you can.. you simply bridge it and plug it into the existing router.. wireless can be either turned off or used to reinforce the existing wireless.. eg use 5ghz in the TC which is much faster than your 2.4ghz.
You can also use a NAS.. many brands available but the top brands are synology, qnap and netgear readynas series. These will all do Time Machine backups although how well always depends on Apple sticking to a standard. There are cheaper ones.. I bought a single disk zyxel which was rebadged and sold through my local supermarket. It actually works very well for TM at least on Snow Leopard. Major changes were made in Lion and again ML so do not instantly think it will work on later versions. I haven't tried it yet with those versions.
Any external drive can be plugged into the mac. Use the one with the fastest connection or cheapest price according to your budget. USB2 drives are cheap and plentiful. But no where near as fast as USB3 or FW800. So just pick whichever suits the ports on your Mac. Interesting Apple finally moved to USB3 on their latest computers.
TM should exclude the VM partition file.. it is useless backing it up from Mac OS side.. and will slow TM as it needs to backup that partition everyday for no purpose.. TM cannot see the files inside it to backup just the changes.
You need to backup windows from windows. Use MSbackup to external drive.. if you have pro or ultimate versions you can backup to network drive. But MSbackup is a dog.. at least until the latest version it cannot restore the partition without first loading windows. There are about a zillion backup software versions for windows.. look up reviews and buy one which works for you. I use a free one Macrium Reflect which does full disk backups and is easy to restore.. to do incremental backups though you have to pay for it.

I'm trying to e-mail music scores and audios, but I receive an error message saying Preview doesn't recognize the file format, regardless whether I use .mus, .pdf, or .mp3. I haven't come across Preview or this problem before. Any suggestions?

I'm trying to send music, scores and audio, as e-mail attachments, with a copy to my e-mail address. Whether I use .mus, .pdf, or .mp3, the error message says Preview doesn't recognize the file format. I haven't seen Preview, or had any problems, before now. Thanks for any suggestions.

Hi,
Firstly, your country is detemined by several factors, including your phone's regional settings, your SIM card and your NokiaAccount settings, if you used this phone whilst abroad then you may need to check that your regional and account settings are up to date since you have arrived in Canada.
For services like Gigs, you should also ensure that the MixRadio app has access to your phone's GPS location as well as the main location being on in the phone settings. To check this, as well as Location being turned on in the phone settings, in MixRadio itself go to Settings>Location>On:
The concern with favourites may also be related to location, if the music from certain artists is available in Canada but not where the service might think you are, availability of content may vary from region to region.
If all settings in both the phone, your Nokia Account and the MixRadio app are correct, we may have to investigate deeper.
It is impossible to comment on your camera without seeing it, you cold have the phone checked by Nokia Care locally, but of course if it was supplied in Europe it will be covered by the European Limited Warranty which is not valid in Canada.
If this or any post answers your question, please remember to help others by pressing the 'Accept as solution' button.

I have a problem with Safari in IOS 8 on my iPad 3. The bookmarks take up a third of the screen and I can't seem to make the bookmarks disappear until I need them. The useful part of the screen is therefore very small. Any suggestions gratefully appr

I have a problem with Safari in IOS 8 on my iPad 3. The bookmarks take up a third of the screen and I can't seem to make the bookmarks disappear until I need them. The useful part of the screen is therefore very small. Any suggestions gratefully appreciated.

OK, it now sort of works. A couple of problems here:
After updating IOS, Safari iCloud was "automatically" switched off
Switching it on had no effect
resetting my iPad automatically switched off safari iCloud again
after switching it back on, it said "turning off safari data"
switched it off and on again, now it said : "turning on safari data" and the sync worked
On IOS 7 no problems
The bookmarks not being displayed was because after pressing the book icon, it defaulted to showing the history and I had to press "Back" to get to the other options

Need suggestion on Multi currency and Unicode character set use in ABAP

Hi All,
Need suggestion. In one of the requirement I saw 'multi-currency and Unicode character set experience in FICO'.
Can you please elaborate me how ABAPers are invlolved in multi currency as I think this is FICO fuctional area.
And also what is Unicode character set exp.? Please give me some document of you have any.
Thanks
Sreedevi
Moderator message - This isn't the place to prepare for interviews - thread locked
Edited by: Rob Burbank on Sep 17, 2009 4:45 PM

Use the default parser.
By default, WebLogic Server is configured to use the default parser and transformer to parse and transform XML documents. The default parser and transformer are those included in the JDK 5.0.
The built-in WebLogic Server DOM factory implementation class is com.sun.org.apache.xerces.internal.jaxp.DocumentBuilderFactoryImpl.
The DocumentBuilderFactory.newInstance method returns the built-in parser.
DocumentBuilderFactory dbf = DocumentBuilderFactory.newInstance();

I need to move the iTunes library to an External Hard Drive to free up space on iMac. Need suggestions on type of External Hard Drive to use. A Multimedia Hard Drive like LaCie LaCinema Classic HD Multimedia Hard Drive OR a Large Desktop Hard Drive?

I need to move an iTunes library to an External Hard Drive to free up space on iMac. I Need suggestions on type of External Hard Drive to use. Should you use a Multimedia Hard Drive like LaCie LaCinema Classic HD Multimedia Hard Drive OR a standard Large Desktop Hard Drive like Western Digital/Seagate/LaCie?

There is no benefit to the multi-media feature on the first drive you mentioned. If you are going to look at differences between certain drives, I'd look at the differences in reliability first.

HT1316 I just bought a 3G, GSM, AT&T compatible (i-Phone) on Amazon. I need to find out whether it uses regular or micro (sim) card.

I just bought a 3G, GSM, AT&T compatible (i-Phone) on Amazon. I need to find out whether it uses regular or micro (sim) card. The phone has not been delivered yet.

iPhone 3G and iPhone 3GS (iPhone 3 series) both use regular SIM Card.
iPhone 4 GSM and iPhone 4S (iphone 4 series) use micro SIM Card.
The iPhone 3 series can use micro SIM with special adapter.

Is Solaris Cluster 4.0 Free?. whether we need any license for using it?

I am able to Download the Solaris Cluster from the Oracle Site. But need to know whether we need any license to use it?

Hello 1577859,
and if you like to get the support updates you need a contract to get access to the Solaris Cluster support publisher.
Hth,
Juergen

Need suggestion in getting data using JDBC

Hi all need suggestion,
     i had a VO corresponding to database table.
     when i am try to get the records from that table,
     how can i initialize the particular column value to the
     corresponding VO setter method.
     please do the needful.

Hello inform2csr,
Your question is not so clear.
Can you be more precise?
What is VO?

Need Suggestion on the xml parser to be used in weblogic env.

Hi All,
1. I would like to know what is the parser suggested to be used when our application is running in the weblogic env. We have xerces parser already shipped in along with jdk and oracle's xdk parser is also available in the env.
Kindly let me know what is the suggested one to use?
2. In one of our applications, jaxp factory (javax.xml.parsers.DocumentBuilderFactory) is explicitly set to xerces's (com.sun.org.apache.xerces.internal.jaxp.DocumentBuilderFactoryImpl).
Now when we changed it to use oracle xdk parser (oracle.xml.jaxp.JXDocumentBuilderFactory), We are running in to issues like 'IllegalArgumentException :not able to set Schema in setAttribute()' as a File Type.
Previously, we used to set the Schema as File Type when xerces parser is used and that used to work fine.
Kindly let me know the way which is accepted by both the parsers.
Thanks
Rajesh

Use the default parser.
By default, WebLogic Server is configured to use the default parser and transformer to parse and transform XML documents. The default parser and transformer are those included in the JDK 5.0.
The built-in WebLogic Server DOM factory implementation class is com.sun.org.apache.xerces.internal.jaxp.DocumentBuilderFactoryImpl.
The DocumentBuilderFactory.newInstance method returns the built-in parser.
DocumentBuilderFactory dbf = DocumentBuilderFactory.newInstance();

Program using Native SQL ... Need suggestion.. Look into code

Hi Friends ,
I need your Inputs to solve the new requirement , which need to be solve using Native SQL,
For this i need to connet to data base 'SIP'.
The table used for this are SAPI.TRANSACTION
fields in SAPI.TRANSACTION
         - SYSTEMCODE
         - BATCH_ID
     and more
the above two fields are selection parameters based on which i need to get data :
please rectify the code and also help me in this
TRY.
      EXEC SQL.
        CONNECT TO :'SIP'
      ENDEXEC.
      IF sy-subrc NE 0.
Error Message
      ENDIF.
      EXEC SQL.
        OPEN dbcur FOR
          SELECT SYSTEM CODE   BATCH_ID
                 FROM SAPI.TRANSACTION
can i use where condition here , i tried to put the selection parameters here
and tried to put the internal table , but the programs gets terminated,
How should i get the fields from table SAPI.TRANSACTION
       IF sy-subrc <> 0.
       RAISE EXCEPTION TYPE cx_sy_native_sql_error.
       ENDIF.
      ENDEXEC.
DO.
EXEC SQL.
      FETCH NEXT dbcur INTO :BATCH_ID
Here i want to get batch id and delete data from other table SAPI.BATCH
ENDEXEC.
IF sy-subrc <> 0.
    EXIT.
ELSE.
ENDIF.
ENDDO.
      EXEC SQL.
        CLOSE dbcur
      ENDEXEC.
      EXEC SQL.
        DISCONNECT :'SIP'
      ENDEXEC.
ENDTRY.

Hi Anirban, I tried that and it still gives the same error:
- "itab_mytable" cannot be a table, a reference, a string, or contain any of these objects. any of these objects"
itab_mytable has been declare as an internal table.
Basically, from the code in the link you gave me, I have made the following changes:
REPORT demo_native_sql.
TYPES: BEGIN OF st,
        connid   TYPE spfli-connid,
        cityfrom TYPE spfli-cityfrom,
        cityto   TYPE spfli-cityto,
      END OF st.
DATA: itab_mytable TYPE TABLE OF st.
<...>
EXEC SQL.
SELECT connid, cityfrom, cityto
INTO   :itab_mytable
FROM   spfli
ENDEXEC.
But this doesn't work. If the internal table is replaced with a one-lined work area, then the select statement works.

Low level Hex disk edit & search util needed- suggestions please?

low level Hex disk edit & search util needed- suggestions please?
Maybe It's just late & I've had a bad day.... but I haven't needed a low level Hex disk edit & search utility suitable for an Intel 10.4.x Mac until now and can't seem to locate one.
There should be plenty of free/shareware options (because they're handy and not particularly hard to write ... and every tech head needs one some time)...
Any suggestions please?
[I haven't bothered with the commercial stuff - like tech tool/Norton/*insert name here* Recover/repair, Something Genius etc. etc. because they are all without exception either unnecessary (just pretty shells for the underlying UNIX/X utils) useless AND greedy $-gougers, just useless, or just money gougers so I couldn't even say whether any still have a 'feature' like the old Norton Disk editor app had - but a quick look about suggest not...]
grumble
Any specific suggestions/links, please?
TIA

they are all without exception either unnecessary (just pretty shells for the underlying UNIX/X utils) useless AND greedy $-gougers, just
useless, or just money gougers
Such a high-esteem for fellow human beings - and
programmers...
You know, there are some good decent nice people
behind those names?
You'd be amazed at how much testing goes into a product.
[SNIP]
g'day Hatter...
Yes, I know there are some good decent nice people behind those names..fellow human beings - and fellow programmers (so yes, I do know...) In previous incarnations I have 'thunk up' and developed, Marketed & supported considerably more complex Apps & systems myself - I even know some of the people you mention personally - and they are usually decent Blokes/women but normally, it isn't the programmers who make the decisions on pricing/features/support/performance/upgrade costs & cycles etc...
My only error was, I agree, the phrase 'without exception' - but (mainly) only because I haven't bought/tested & used all of them very very recently. So I offer my apologies to those to whom my remarks should not apply (long, late night/early morning frustration...)
However, I also offer a few simple pertinent examples:
One 'top name' Utility company had a 'save your Mac HD' product on the market for some time that was almost guaranteed to TRASH it irretrievably but did NOT say so - nor did they help or compensate those they harmed.
Several are selling what amount to simple, pretty, GUI shells for 'free' or OS-included command line tools - no more, no less but do NOT say so and are asking good money for the 'software'.
Many are asking ridiculous prices for "regular upgrades" so you can keep their tool current with your Mac OS - one wants US$100/year for it, another, $15 per u/g, others, US$25 or $40 per u/g; one asks 'only' $10 - and these 'upgrades' are happening 3,4,5,6 times per year and are necessary for the Marketing company to keep their product Saleable to new purchasers and new Macs (as well as for important Bug Fixes - and only co-incidentally to keep it performing with your current Mac and OS - which is what you paid them for in the first place).
I won't pay for a product 3, 6 or 9 times and I won't advise my clients to: It's not unreasonable for a person to expect a 'sensible lifetime/currency' of Product X for Computer Y - say 3 years (e.g. AppleCare). I wouldn't object to paying for an "upgrade" at that point - IF it's worth the money.
Software is Waaay too expensive in many cases and is simply inviting 'piracy' - from people who have already PAID for the product: sadly, they are killing their own Gooses.
Seriously, one product costs ca. US$100 to Buy in the first place
To keep it actually working for you costs about the same again Per Year - a 3 year 'sensible lifetime' or 'currency' cost of US$300 or $400! [That'll buy a lot of 'bare drives' to put in a handy Firewire case for automatic backups in Background, differential backups etc. and other simple practices which render this product type largely unnecessary ].
For what? A relatively simple set of utilities which would actually cost the company involved less than $5 total each - over 3 years - to make available to existing ( or 'current') owners. [Applecare 'complete' Hardware and Software warranty & support on a US$2000 iMac - which includes Tech Tools Pro Deluxe or somesuch costs about US$165 for 3 years. Total.]
Having designed, developed, Marketed, supported & maintained more complex Applications to/for a sizeable user-base (in US terms) over multiple complete Series of Product 'life-cycles' - regular Updates and all, I think I know where the pirates are.
These practices have been rampant in the MSWindows™ market for a longtime. It's a real shame to see it in the Mac world.
I have all the esteem in the world for those fellow human beings who deserve such - and programmers who are 'good decent nice people'.
I have none to spare for monopolists, 'exploitationists' or any of those who take unfair/unreasonable advantage of their fellow human beings - AND of programmers who are 'good decent nice people' (like, say, ME... .
In any event, as I said: they are "killing their Gooses": I know of at least 6 software companies which went this route a while back. All are dead or dying.
Thank you for your help - and the opportunity to apologise for 'mis-speaking'.
all the best,
orig g4 733, many others thru (the luvly) Macintels New & old Macs, Wintels, MacIntels, other systems...

Need suggestions to write a PL/SQL program

Hi,
We have some readme documents in different places. we need to keep the docs in specified folders. for example if we have around 100 docs we need to figure out the required docs by giving the just any one word from that doc name.
now the requirement is need to keep all the docs in one specified folder (check the product name, if the product is there then it will pick all the docs related to that particular product and keeps in separate folder). whenever we need to find out any one of the document from that product we need to give the short word from that doc name then it will show you the required doc.
So could you please let me know is it possible to write any PL/SQL program for the above requirement else suggest me which one will support to resolve the above requirement.
Kindly suggest me for the above request.
thanks in advance.

You may want to consider loading the documents into blobs or using BFILES.
BFILE defnition
http://download.oracle.com/docs/cd/E11882_01/server.112/e17118/sql_elements001.htm#SQLRF50996
BLOB definition
http://download.oracle.com/docs/cd/E11882_01/server.112/e17118/sql_elements001.htm#SQLRF50997
Regardless of whether you use BLOB's or BFILE's, you'll have to build a metadata table for each document.
For example, if you decided upon BLOB's, you would need some kind of metadata table as follows;
create table doc_table (id number, doc_name varchar2(20), b blob);
insert into doc_table values (1, 'DOC_A', to_blob('A'));
insert into doc_table values (2, 'DOC_B', to_blob('B'));
commit;
create table doc_metadata (id number, keyword varchar2(20));
insert into doc_metadata values (1, 'A');
insert into doc_metadata values (2, 'B');
commit;You would then search for a document based on a keyword, for example,
to find document A;
select dt.doc_Name
from   doc_table    dt
      ,doc_metadata dm
where dt.id = dm.id
and    dm.keyword like 'A';You could add more columns (as you like), for example location, size etc.

Need suggestion on how to do 3D spinning title animation

Hello all experts,
I need suggestion on how to do 3D rotating title animation. Let me explain what i wanted to do.
The end product is the word WELCOME.
But I want to animate it in such a way that the alphabelt W first appear as nothing from inside the screen to appear in the screen (that means zoom from small to big, is it called zoom out ?). In the process of zooming out, I want the W to have a thickness & it spins very fast along the horizontal X-axis and stops at the screen with the alphbelt W.
Then the whole process repeat with E, and I have WE. It then repeats with L and I have WEL. This whole thing repeats until it forms the word WELCOME.
Any suggestions ? Is there an inbuilt preset for this ?
If not, if I do from scratch, do I need a separate track for each alphabelt ?
Thank you very much.
Cheers.

Nick Holmes wrote:
You would have to build this one from scratch, but it's pretty easy.
Work on the whole word first to get the basic movement, then play with the Timing settings in the Inspector. To have the letters do this one after the other use the Sequence setting. Typically you would set it to the number of letters in your word plus 1 -so your welcome should have a Sequence value of 8. You can of course set it to whatever you think looks best.
Give it a go and let us know how you get on. Don't forget to save your new effect!
Thanks Holmes but where do I find the Sequence settings ?
Thanks

Need Suggestion on Timer in Oracle

Hi,
I need to call a process on a time interval.
Begin
UPDATE USERS
SET
STATUS = 'VERIFIED'
WHERE
ID = :P44_USER_ID;
/* After showing this print message */
HTP.P('<div class="t18notification"><font size="3" color="BLUE">
Your Account registered Sucessfully...!
</font></div>');
/* This message must show after 3 seconds after the above print message */
HTP.P('<script type="text/javascript">

</script>');
End;
Timer is a new concept to me do we have any such feature which we can use in plsql please suggest me.
Thanks
Sudhir

Sudhir_Meru wrote:
I need to call a process on a time interval.
/* After showing this print message */
HTP.P('<div class="t18notification"><font size="3" color="BLUE">
Your Account registered Sucessfully...!
</font></div>');
/* This message must show after 3 seconds after the above print message */
HTP.P('<script type="text/javascript">

</script>'); Not possible. Web-based client-server does not work like this.
A COMPLETE page is generated. With ALL content. Then that is shipped of by the web server to the web browser. So putting a delay between 2 HTP.put() statements only slows down the generation of that HTML page - before the ENTIRE page is shipped off to the web browser.
Web browsers are block devices - not typewriter devices.
If you want delays between content rendering on the web browser, you need to use Javascript (executes inside the browser).
If you want to make a web browser act like a typewriter devices, then you need to look at using Ajax calls from Javascript to the web server.
It is important that you fully grasp web-based client-server, when developing web applications - understanding how the HTTP protocol looks and works, and understanding the interaction between client and server works.

Need suggestion whether to use ATM or MPLS in DSL implementation

Similar Messages

Maybe you are looking for