Need suggestions for a new printer with OS 10.9.5
I have a 2010 HP 6500 A Plus printer that has worked well with my iMac circa 2010. Printer is not feeding paper. It won't scan. Are there suggestions for a new compatible printer for OS 10.9.5.?
Hey Debbisita,
Thanks for the question. It sounds like you are experiencing issues with your Printer and OS X. Before opting to purchase a new printer, you can try these troubleshooting steps to completely isolate the issue:
Troubleshooting printer issues in OS X - Apple Support
http://support.apple.com/ts3147
Follow these steps until the issue is addressed:
Make sure that the printer is powered on, has ink / toner, and that there are no alerts on the printer’s control panel. Note: If you cannot clear an alert on the printer's control panel, stop here and check the printer's documentation or contact the manufacturer for support.
Ensure the printer is properly connected to a USB port on the Mac or AirPort base station / Time Capsule. If the printer is a network-capable printer, make sure that it is properly connected to your home network.
Use Software Update to find and install the latest available updates. If an update is installed, see if the issue persists.
Open the Print & Scan pane or Print & Fax (Snow Leopard) pane in System Preferences.
Delete the affected printer, then add the printer again.
If the issue persists, try these additional steps:
Reset the printing system, then add the printer again.
If the issue still persists, reset the printing system again. Download and install your printer's drivers. Then, add the printer again.
Contact the printer vendor or visit their website for further assistance.
Thanks,
Matt M.
Similar Messages
-
Do I need to buy a new printer, dedicated for my Mac or can I use the same one we use for our PCs?
Hello stacksofamber and welcome to Apple Support Communities,
You should be able to find a Mac OSX driver for that printer. Did you check with the manufacturer/'s website? -
Hard drive died. Cannot uninstall CS3 to remove copy registration. Need to reinstall on new laptop with windows 7 64 bit system, Need to get activation code for CS3 Web Premium.
Thank you Bob.
Just to clarify - in terms of backing up one set of these, would that just be so I had it on disk and didn't need to re-download from Adobe if the installation got corrupted somehow? Or do I need a backup for some other reason?
Thanks -
Suggestion for what small printer for clamshell ibooks
Hi all
I need suggestions for small printers that can work with clamshells OS 10.3 and OS 9.2.You've just learned a hard lesson. Put your current energy into your education, not finding a way to wallow in ignorance.
There already is a hardware device that will do what you want. It's called a "manual". In particular, the sections that relate to "where the program stores media". Pay very close attention to those sections and set up your computer so that all the scratch and storage pointers are aimed where you want. It's very simple to have them all go to one drive.
Then, when it's time to archive the project because you are starting a new project, just purchase another hard drive for the new project. They are absurdly inexpensive these days.
Remove the drive with your project to be archived from your computer (since you now know how to keep all the files organized, they will be all together) - and plug in a new disk for the next project.
If you want a backup, use carbon copy cloner to simply duplicate the drive (or simply just copy the relevant folders- you'll know which ones) to another drive (or get a RAID 1 device)
good luck,
x -
Need Suggestion for Archival of a Table Data
Hi guys,
I want to archive one of my large table. the structure of table is as below.
Daily there will be around 40000 rows inserted into the table.
Need suggestion for the same. will the partitioning help and on what basis?
CREATE TABLE IM_JMS_MESSAGES_CLOB_IN
LOAN_NUMBER VARCHAR2(10 BYTE),
LOAN_XML CLOB,
LOAN_UPDATE_DT TIMESTAMP(6),
JMS_TIMESTAMP TIMESTAMP(6),
INSERT_DT TIMESTAMP(6)
TABLESPACE DATA
PCTUSED 0
PCTFREE 10
INITRANS 1
MAXTRANS 255
STORAGE (
INITIAL 1M
NEXT 1M
MINEXTENTS 1
MAXEXTENTS 2147483645
PCTINCREASE 0
BUFFER_POOL DEFAULT
LOGGING
LOB (LOAN_XML) STORE AS
( TABLESPACE DATA
ENABLE STORAGE IN ROW
CHUNK 8192
PCTVERSION 10
NOCACHE
STORAGE (
INITIAL 1M
NEXT 1M
MINEXTENTS 1
MAXEXTENTS 2147483645
PCTINCREASE 0
BUFFER_POOL DEFAULT
NOCACHE
NOPARALLEL;
do the needful.
regards,
SandeepThere will not be any updates /deletes on the table.
I have created a partitioned table with same struture and i am inserting the records from my original table to this partitioned table where i will maintain data for 6 months.
After loading the data from original table to archived table i will truncating the original table.
If my original table is partitioned then what about the restoring of the data??? how will restore the data of last month??? -
ArchWiki: suggestion for a new page layout
Finally, I have some time to spare for ArchWiki improvement.
I have modified my article on CMYK support in The GIMP as an example.
Please take a look at it here:
http://wiki.archlinux.org/index.php/CMY … n_The_GIMP
The code to produce the box on the right is here:
{{sn|'''Article summary:'''
This article will show how to enable rudimentary CMYK support in The GIMP using the Separate plug-in, and explain how to use color proof filter to soft-proof your images.
It will also cover more general topics on CMYK colors and DTP.
'''Required software:'''
*[http://www.gimp.org/ The GIMP The GIMP]
*[http://www.littlecms.com/ lcms]
*[http://download.adobe.com/pub/adobe/iccprofiles/win/AdobeICCProfiles_end-user.zip Adobe ICC profiles]
*[http://www.blackfiveservices.co.uk/separate.shtml Separate plugin source]
'''Related article:'''
*[[Using lprof to profile monitors]]
This is the best we can do with current ArchWiki setup. It would be even better if we could list categories in the box, as well as i18n links.
dtw wrote:Doesn't display correctly in IE
I've been tinkering with the templates. It's fixed now, I think.
Anyway, the templates used for the job can be seen from the code:
{{Article summary start}}
{{Article summary text|This article will show how to enable rudimentary CMYK support in The GIMP using the Separate plug-in, and explain how to use color proof filter to soft-proof your images. It will also cover more general topics on CMYK colors and DTP.}}
{{Article summary heading|Translations}}
{{i18n_entry|Deutsch|CMYK support in The GIMP(Deutsch)}}
{{i18n_entry|English|CMYK support in The GIMP}}
{{i18n_entry|Español|CMYK support in The GIMP(Español)}}
{{i18n_entry|Finnish|CMYK support in The GIMP(Suomi)}}
{{i18n_entry|Français|CMYK support in The GIMP(Français)}}
{{i18n_entry|Nederlands|CMYK support in The GIMP(Nederlands)}}
{{Article summary heading|Required software}}
{{Article summary link|The GIMP (v2.0 and above)|http://www.gimp.org/}}
{{Article summary link|lcms (v1.15 ?)|http://www.littlecms.com/}}
{{Article summary link|Separate plugin (v0.10 and above ?)|http://www.blackfiveservices.co.uk/separate.shtml}}
{{Article summary heading|Related articles}}
{{Article summary wiki|Using lprof to profile monitors}}
{{Article summary end}}
As you can see, it's a bit more typing than before, but it sure looks better. I might shorten the names for the templates. I wanted to make them memorable so they are a bit long.
As you can see, the problem of i18n links integration was fixed, so you can use existing i18n template and combine with the new "Article summary" set.
I will modify the article about writing summaries to include those templates and examples.
EDIT: :oops: the i18n links in the article are just examples. Don't use them, since they lead to non-existing pages.
EDIT2: Okay, I've played around with the appearance of the summary box, but I'm at work now, so it's going nowhere. I'll play with it some more when I get home.
dtw wrote:Doesn't display correctly in IE
I've been tinkering with the templates. It's fixed now, I think.
Anyway, the templates used for the job can be seen from the code:
{{Article summary start}}
{{Article summary text|This article will show how to enable rudimentary CMYK support in The GIMP using the Separate plug-in, and explain how to use color proof filter to soft-proof your images. It will also cover more general topics on CMYK colors and DTP.}}
{{Article summary heading|Translations}}
{{i18n_entry|Deutsch|CMYK support in The GIMP(Deutsch)}}
{{i18n_entry|English|CMYK support in The GIMP}}
{{i18n_entry|Español|CMYK support in The GIMP(Español)}}
{{i18n_entry|Finnish|CMYK support in The GIMP(Suomi)}}
{{i18n_entry|Français|CMYK support in The GIMP(Français)}}
{{i18n_entry|Nederlands|CMYK support in The GIMP(Nederlands)}}
{{Article summary heading|Required software}}
{{Article summary link|The GIMP (v2.0 and above)|http://www.gimp.org/}}
{{Article summary link|lcms (v1.15 ?)|http://www.littlecms.com/}}
{{Article summary link|Separate plugin (v0.10 and above ?)|http://www.blackfiveservices.co.uk/separate.shtml}}
{{Article summary heading|Related articles}}
{{Article summary wiki|Using lprof to profile monitors}}
{{Article summary end}}
As you can see, it's a bit more typing than before, but it sure looks better. I might shorten the names for the templates. I wanted to make them memorable so they are a bit long.
As you can see, the problem of i18n links integration was fixed, so you can use existing i18n template and combine with the new "Article summary" set.
I will modify the article about writing summaries to include those templates and examples.
EDIT: :oops: the i18n links in the article are just examples. Don't use them, since they lead to non-existing pages.
EDIT2: Okay, I've played around with the appearance of the summary box, but I'm at work now, so it's going nowhere. I'll play with it some more when I get home.
If I want to put windows7 on my Mac,do I need software for a new comp. or a refurbished one?
Mikestoyzz wrote:
Looking on eBay,the software is labeled for new or refurbished.i'm putting it on through boot camp.
With my limited knowledge, I don't think that it matters.
Need suggestion for designing a BEx report
Hi,
I need suggestions for designing a BEx report.
Iu2019ve a DSO with below structure:
1. Functional Location u2013 Key
2. Maintenance Plan u2013 Key
3. Maintenance Item u2013 Key
4. Call # - Key
5. Cycle u2013 Data Field
6. Planned Date u2013 Data Field
7. Completion Date u2013 Data Field
This DSO contains data like:
Functional -
Plan --- Item -
Call# --- Cycle -
Planned Dt -
Completion Dt
Location
11177 -
134 -
20 -
1 -
T1 -
02-Jan-2011 -
10-Jan-2011
11177 -
134 -
20 -
2 -
T2 -
15-Feb-2011 -
11177 -
134 -
20 -
3 -
T1 -
15-Mar-2011 -
11177 -
134 -
20 -
4 -
M1 -
30-Mar-2011 -
25000 -
170 -
145 -
1 -
T1 -
19-Jan-2011 -
19-Jan-2011
25000 -
134 -
145 -
2 -
T2 -
20-Feb-2011 -
25-Feb-2011
25000 -
134 -
145 -
3 -
T1 -
14-Mar-2011 -
Now Iu2019ve to create a report which will be executed at the end of every month and should display the list of Functional Locations whose Cycles were planned in that particular month, along with the last completed Cycle/Date.
Thus based upon above data, if I execute report at the end of (say) March then report must display:
Functional --- Curr. Cycle --- Planned Date --- Prev. completed Cycle --- Prev Completed Date
Location
11177 -
T1 -
15-Mar-2011 -
--- T1 -
-- 10-Jan-2011
11177 -
M1 -
30-Mar-2011 -
--- T1 -
-- 10-Jan-2011
25000 -
T1 -
14-Mar-2011 -
--- T2 -
-- 25-Feb-2011
Any idea how can I display Previous Completed Cycle and Completion Date (i.e. the last two columns)?
Regards,
Vikrant.
hi vikrant,
You can a Cube at the reporting layer which gets data from DSO and which has these 2 extra characteristics completion date and previous cycle along with other chars and keyfigures from DSO.
You can populate these based on your logic in the field routine.
Hope it helps.
Regards
Dev
How do i install a new printer with no dvd?
how do i install a new printer with no dvd?
Hook it up and see if it works. If it is one of the more common printer brands/models, it could very well have it's drivers installed, depending on how your OS was installed. If not, you can always go to the support site for your printer and download the drivers, if necessary.
What kind of printer do you have? What OS and how was it installed?
I would like to upgrade my OS to the latest version. I now have 10.6.8 and my machine has 1Gb of memory. Need 2Gb for the new OS. Is is possible (and practical) to add memory to a machine that's five years old?
You can put two 2gb RAM sticks in your model 2,1 but it can only use 3,3gb. This is a hardware limitation and cannot be changed.
http://en.wikipedia.org/wiki/3_GB_barrier
http://www.everymac.com/systems/apple/macbook_pro/faq/macbook-pro-core-2-duo-3-g b-memory-limitation-details.html
OWC tests have found that there is a slight speed increase with having two 2gb sticks in rather than one 1gb and one 2gb. Your model is in the gray lines at the bottom of the graph. http://eshop.macsales.com/shop/Memory_Benchmark/Apple_MacBook/
You can buy Lion for $29 from the App Store witht a model 2,1 MacBook. Lion will require at least 2gb of RAM but really needs 4gb to run smoothly. As for programs see this list for compatibility with 10.7 http://roaringapps.com/apps:table
Lion doesn't run any Power PC programs. To see if you have any Power PC programs go to the Apple in the upper left corner and select About This Mac, then click on More Info. When System Profiler comes up select Applications under Software. Then look under Kind to see if any of your applications are listed as Power PC. Universal and Intel will run under Lion.
Before Mac switched to Intel processors they used Power PC processors from 1994 to 2005. Power PC 601 through 604, G3, G4 and G5. Applications written for the Power PC processors need the application called Rosetta to run on Intel processors. This was part of the Operating System in 10.4 and 10.5 but was an optional install in 10.6. With 10.7 Lion Apple dropped all support for Power PC applications.
These are good online stores for Mac compatible RAM
OWC http://eshop.macsales.com/shop/memory/MacBook/DDR2/ - They offer Mac tested RAM at very good prices.
Crucial Memory http://www.crucial.com/ - good place to buy RAM from all over the world. They also have an excellent memory selector that allows you to choose memory based on your computer's model
Data Memory Systems http://www.datamemorysystems.com/apple-memory.asp - another good, cheap place to buying RAM if you live in the U.S.
Here are instructions on replacing RAM in a MacBook with a removable battery. http://homeoffice.consumerelectronicsnet.com/articles/viewarticle.jsp?id=44404
If you don’t have the tools to open up the MacBook OWC has a set for $5
http://eshop.macsales.com/item/OWC/TOOLKITMHD/
Any BAPI/Function Module for adding new record with dates in PA0027
Hi all,
I am tryig to find is there any BAPI/Function module for updating new record with Start Date and End date for specified Personal Number in PA0027 Table.
In PA0027 table i will be passing start date and end date for selected personal number, it needs to add new record with this details in the table checking the condition that this start date and end dates should not be between any of of start date and end dates for the specified personal number.
thanks for ur time.
Murali
Hi Raj/Suresh thanks for ur answers.
but i am having a problem,i gave this values.
INFTY -
0027
NUMBER -
00000010
SUBTYPE -
010
OBJECTID
LOCKINDICATOR
VALIDITYEND -
03/12/2006
VALIDITYBEGIN -
03/01/2006
RECORDNUMBER -
000
RECORD -
P0027
OPERATION -
CHK
TCLAS -
A
DIALOG_MODE -
0
NOCOMMIT -
Y
VIEW_IDENTIFIER
SECONDARY_RECORD
i am getting short dump saying that
The source field is too short.
The current program, "SAPLHRMM", tried to assign a field to a field symbo
However, the field is shorter than the type of the field symbol, which
is not allowed.
The statement in question is in the form ASSIGN f TO <fs> CASTING or
ASSIGN f TO <fs> with a field symbol that was created using the
STRUCTURE addition.
I tried operation - Chage,Create (same thing for all inputs)
is this correct funtion moduel for my requirment?
what ever i am passing the start and end dates this should check in the table records with this personal number and if this start date and end dates are not between of any start and end dates then it should add new record with this dates.
Thanks for ur time.
Murali.
i contacted what I thought was Brother Support for my new printer, then I got skeptical. He gained access through a program called TeamViewer, is my Mac safe?
They're probably just interested in getting $ from you, there are several companies who advertise in a way that suggests 'official' support for all sorts of things. Unfortunately, if they had access as you describe, they potentially could have installed other software and/or read any of your files.
Ideally - change all passwords for email/banking/login & restore a backup from before this happened.
I need to download adobe acrobat 7. I had it on my old computer and need it for my new computer. I have the serial #. Where can I get that download?
http://helpx.adobe.com/x-productkb/policy-pricing/creative-suite-2-activation-end-life.htm l. I think this is the link. However, you will need to use the new S/N if you need to do the activation. The Activation server for AA 7 was taken down. I am not sure this link is complete, but it might give you some idea. However, on WIn7 and newer, AA7 has problems and will only work with some workarounds, and then kind of clunky.
I need to buy a new printer! Compatibility
I need to buy a new printer this weekend as mine has just broke.
I don't like HP
Can someone tell me if cannon printers will work with the soon to be released Apple print application? Or what brands are compatible I've heard it's only HP but this does not makensense to me.
Please help as I'm buying tomorrow.
As of now, the only printers to support AirPrint are the HP Officejet Pro 8500A, the HP Photosmart Premium Fax e-All-in-One, and the HP Photosmart e-All-in-One. Any printer that is connected to a computer and shared on the network through that computer will also work, although the computer must be turned on and connected to the network. Other printers may be compatible eventually, but at the moment, only the 3 HP printers support it. Several other printers are supported by printing applications.
How can i make a suggestion for a new IOS
Hello everybody y would like to know if i can make any suggestion for a new IOS cause there is some new things y would like it to have.Thanks.
Apple Feedback
Maybe you are looking for
-
Standard FICA datasoources ate missing- Alternative solution
Hi All, Our ISU system is in ECC6 with out any Ehp. CRM-2005 is connected with ISU system through middleware. We are missing standard FICA BW datasources( 0FC_BP_ITEMS,0FC_DUN_HEADER,0FC_DUN_ITEMS) due to unavalability of Ehp in the ISU system. If Eh
-
I have a 13inch, late 2011 Macbook Pro. It has a Os x Lion 10.7.4 as its' software. The camera was woking fine when I got it, and then one day it just stopped working. I have no idea why. I checked in system information to make sure it was present in
-
Hi, I've problem with transport SOAP DataSource. I've created InfoSource, Create DataSource with SOAP, etc. always write package and request. Everything works OK. But after import from DEV to QAS i've error: "Extract structure ZOXPBW0027 is not activ
-
Hi, Can we cancel a fully matched PO. If no,, then i did that. Now the question is this: Q1: in my PR worklist, one line is from that PO . If i will return this line then the status will be returned. Q2: If i will perform above activity, is it affect
-
Hi Friends Can anyone help me in this problem. 1.I have to select the particular path Ex: c:\new folder\prog 2.Then i want to display the list (file names) in that particular folder in ABAP . Ex: in prog i have 5 excel files.i want to display the lis