Need suggestions for new router running mac with eyeconnect,and ps3

We have the latest version of leopard on our 24" imac and we have eyeconnect ver. 1.6 we need to buy a new router and i want one that is very easy(like plug it in and walk away)to use. The main priority for this is not having problems streaming media to our ps3 via eyeconnect or medialink. Wireless or wired whatever would be the best i have never actually had an airport only linksys and have been unhappy with most of them any advice welcome about the router or getting eyeconnect to be recognized by the ps3 once its hooked up. Thank you

What I have in my house is an Airport Extreme with it's two (n,b or g) wireless connections for older non-N wireless connections. I then got a D-Link DGS-2208 10/100/1000Mbps 8-Port Desktop Green Ethernet Switch 8 for fast subnet sharing in the house. This speed is important for HD video sharing for from the external I have connected to the USB2 port on My Extreme.
Note: My Extreme is in "Bridged mode" because it sits behind a wired router that acts as the DHCP server.
Getting a router with Gig Ports and and USB2 port for an external to store/share files (videos mainly) to all my networked devices. The USB2 port on the Extreme was the deciding factor for the extra cost and this handy port making any USB2 external into a networked drive. Plus my older iPhone 3GS only does G it was a no-brainier because of the dual wireless.
The GIG switch is future proofing yourself for the years to come.
Plus I called the extreme but it is a Time Capsule that is just and extreme with a built-in disk.
One more thing: Use CAT6 cables in your network.
Message was edited by: satcomer

Similar Messages

  • Suggestions for new router/switch

    I have a wired Ethernet network in my office, and have been using a Linksys BEFSR81 router with it since installation. The following machines are connected:
    MacPro early 2009 OSX.5.7
    G5 2.0 dual OSX.5.7
    iMac flat panel 700 mHz OSX.4.11 (2 identical machines)
    HP 2300n printer
    Brother multifunction printer/fax/copier
    The router is dying and needs to be replaced. The whole network is hard wired but I could use a wireless router (e.g. Linksys WRT310) with a switch (I need at least 6-7 ports total. The selection of wired-only routers is very limited; what would people suggest for replacing the Linksys BEFSR81?

    Check these pages out first on how to install. NOTE, to look for the"GL" version, as the G, GL, GS, GX are all on the same page.
    http://www.dd-wrt.com/wiki/index.php/Installation
    http://www.dd-wrt.com/wiki/index.php/Linksys_WRT54G/GL/GS/GX
    http://www.dd-wrt.com/wiki/index.php/Index:FAQ
    For the GL, you need to flash 2 firmwares initially in the beginning.
    You first need to flash a mini generic (or micro); just go with mini, to the router first. Then after the mini is installed, flash the standard generic.
    To easily find the right versions. Go to the dd-wrt homepage, and then look for the tab that says "supported hardware". Click on that and type in: WRT54GL (which is your router name, the one I recommended). The model GL model will show up, and click on it. There you will have all the firmwares that can be used with the WRT54GL.
    There are a few different ones, but the ones you need to download are the "mini generic" AND "standard generic" (non-usb standard generic, if you're connecting through ethernet. Only if you use usb to connect to the internet then the usb version). Look at the file name to confirm.
    Flash mini first, then standard second. And you only have to do this once.
    Make sure to read through the above installation guide carefully, and just basically take your time. Some things to look out for are mainly just 2 things:
    (1) Doing 30/30/30 hard-resets before AND after flashing.
    (2) Use Internet Explorer to do the initial flash. DO NOT use firefox (maybe not even safari). This is only for the initial flash with the linksys firmware on. Once dd-wrt firmware is on, any browser will do. This is in the install guide, but basically any PC with IE will do fine. If you don't have access to a PC, you can even use the "old" IE for mac. That will work too.
    Again just take your time, read things, and double check them. It's actually a very easy process after you've done it once.
    Reply back if you need any help

  • Need suggestion for new laptop

    Hi, everyone I'm needing suggestions. I had a touchsmart tx2z however after nearly 4 years it has bit the dust couldn't be saved after its last crash computer would turn on but screen would stay black and ome of the keys like the caps lock would flash. Computer guys say my motherboard has gone bad.  I'm looking for another computer now but would like one that is similar to the hp touchsmart but does not cost a lot of money.  

    Here is the current line-up of HP Touchscreen Laptops. Prices start at about $650 and go up from there. $650 sounds OK to my for a touchscreen laptop, but price is a subjective item. If these are too rich for you, you could always look at regular laptops.
    Please send KUDOs
    Frank
    {------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
    Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
    This is a user supported forum. I am a volunteer and I don't work for HP.
    HP 15t-j100 (on loan from HP)
    HP 13 Split x2 (on loan from HP)
    HP Slate8 Pro (on loan from HP)
    HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
    HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
    HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
    HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
    HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

  • Suggestions for new router for home with Macs and PC's?

    Hey everyone, my router just died (RIP WRT54G) my house is quite diverse, and I need a router that can handle it all, I have: 1) A Wii (wireless) 2) bluray player (wired) 3) internet enabled HDTV (wired) 4) a PC running Windows 7 (wired) 5) two MacBooks (wireless) and finally, 6) two iPhones (wireless, obviously) oh yeah and 7) an XBOX 360 (wired) sounds crazy now that I write it all out :P
    So, I need a router that can take wired connections and wireless all at once without freaking out, any ideas?
    Thanks!

    What I have in my house is an Airport Extreme with it's two (n,b or g) wireless connections for older non-N wireless connections. I then got a D-Link DGS-2208 10/100/1000Mbps 8-Port Desktop Green Ethernet Switch 8 for fast subnet sharing in the house. This speed is important for HD video sharing for from the external I have connected to the USB2 port on My Extreme.
    Note: My Extreme is in "Bridged mode" because it sits behind a wired router that acts as the DHCP server.
    Getting a router with Gig Ports and and USB2 port for an external to store/share files (videos mainly) to all my networked devices. The USB2 port on the Extreme was the deciding factor for the extra cost and this handy port making any USB2 external into a networked drive. Plus my older iPhone 3GS only does G it was a no-brainier because of the dual wireless.
    The GIG switch is future proofing yourself for the years to come.
    Plus I called the extreme but it is a Time Capsule that is just and extreme with a built-in disk.
    One more thing: Use CAT6 cables in your network.
    Message was edited by: satcomer

  • Need Suggestion For Background Replacement (Extending Tiles With Perspective)

    Hi,
    I am primarily a web developer... not a photo retoucher. I'm not looking for a LOT of handholding (though I'd take it ) but just some suggestions. I have a fairly typical case where a client will give me a background that needs replacement. Usually I can work some 'magic' with content-aware-fill and masking but I get a surprising number of shots like this case, where there is a background with a repeating 'something' that needs to be repeated/stretched and maintain perspective. Below was my first shot at a 'dummy' effort which shows what I'm trying to learn how to do. I just copied/pasted a selection and used content-aware-scale in a half-baked 'Frankenstein' way. I'm hoping there is a much better way that I'm too ignorant to have figured out! In addition to extending the tiles, I need to match the light/shadowing. Any tips or suggested books/tuts would be MUCH appreciated.
    Oh yeah... I'm using C5.5 Windows (not made it to the cloud yet.)
    TIA,
    ---JC
    Be

    Thanks, I'll look at vanishing point. I'm kinda looking for a 'general' solution... this is just an example I concocted.. but the same issue comes up again and again. I just used the title because it shows the situation so clearly. I can't just 'extend' things because there's a pattern which needs to be repeated -and- displayed with proper lighting and perspective.
    I also definitely would appreciate tips on colour matching.

  • Need figure for Hard Drive Space saved with FCS and LS installed

    Hello (this is my first post!)
    Have a quick question... I am planning a purchase of a 17" MBP in the very near future, and am trying to get a total GB required for my HD with the software I will be using. Basically, if the total is low enough, I can get an SSD!
    So here is my quandary. If I were to install Final Cut Studio and Logic Studio on a MBP, there is overlap in Compressor and Soundtrack Pro, and in all (?) of the audio content. If I understand the tech spec breakdown correctly, that means at least 22 GB (from the audio content breakout) of the installation is duplicate. Does anyone know the total GB (for the programs and content) that would be duplicate? I am looking for how much HD space that would be saved in this scenario. This will help me out tremendously in planning my purchase.
    Thanks!
    Dave
    PS - BTW, I am aware some folks install all of the content on a separate external disk. While I have read up on the Pros/Cons, I figure that if I were to have an SSD large enough, it would be excellent to not have to plug in an external HD since the internal speed should suffice...

    If you can, aim for a 256GB SSD, which will hold your core programs and have overhead for content (should you choose to store it there) and future expansion/growth.
    If it's a 2011 machine, then start eyeballing external drives sporting the ThunderBolt interface, which is RIDICULOUSLY fast. A bunch of products are likely to be announced at this week's National Association of Broadcasters show, and will begin shipping in the days/weeks to come. The external drive should have no problem offering you capacity and performance that you'd need for your work. I have to admit, I'm a little envious - the new 'sandy bridge' MacBook Pro with that ATI chip and the new interface look really fantastic, it's an incredible amount of power to have on the go.
    Good luck!

  • Need Suggestion for Archival of a Table Data

    Hi guys,
    I want to archive one of my large table. the structure of table is as below.
    Daily there will be around 40000 rows inserted into the table.
    Need suggestion for the same. will the partitioning help and on what basis?
    CREATE TABLE IM_JMS_MESSAGES_CLOB_IN
    LOAN_NUMBER VARCHAR2(10 BYTE),
    LOAN_XML CLOB,
    LOAN_UPDATE_DT TIMESTAMP(6),
    JMS_TIMESTAMP TIMESTAMP(6),
    INSERT_DT TIMESTAMP(6)
    TABLESPACE DATA
    PCTUSED 0
    PCTFREE 10
    INITRANS 1
    MAXTRANS 255
    STORAGE (
    INITIAL 1M
    NEXT 1M
    MINEXTENTS 1
    MAXEXTENTS 2147483645
    PCTINCREASE 0
    BUFFER_POOL DEFAULT
    LOGGING
    LOB (LOAN_XML) STORE AS
    ( TABLESPACE DATA
    ENABLE STORAGE IN ROW
    CHUNK 8192
    PCTVERSION 10
    NOCACHE
    STORAGE (
    INITIAL 1M
    NEXT 1M
    MINEXTENTS 1
    MAXEXTENTS 2147483645
    PCTINCREASE 0
    BUFFER_POOL DEFAULT
    NOCACHE
    NOPARALLEL;
    do the needful.
    regards,
    Sandeep

    There will not be any updates /deletes on the table.
    I have created a partitioned table with same struture and i am inserting the records from my original table to this partitioned table where i will maintain data for 6 months.
    After loading the data from original table to archived table i will truncating the original table.
    If my original table is partitioned then what about the restoring of the data??? how will restore the data of last month???

  • Printer is overprinting old jobs on top of new jobs.  Using a Mac with OSx and a HP photosmart for over a year.  this just started happening.

    Printer is overprinting old jobs on top of new jobs.  Using a Mac with OSx and a HP photosmart for over a year.  this just started happening.

    RReset printing system again and the restart in Safe Mode . This will clear some caches,to do this hold down the Shift key when you hear the startup tone until a progress bar appears, after it has fully booted restart normally and add the printer.

  • Brand new iMac running slow with only 3% of HD used!

    I just purchased a new iMAC 21.5" with 2.9 i5 and 8GB memory and literally have yet to add any programs except AI, ID and PS and its running very poorly. This is my first MAC and i'm very disappointed. I purchased this computer for school where I am getting my BS in media arts. I use an older 27" iMAC at school using all the same programs and more and my new computer doesn't hold a candle to its usability. For example, opening up the programs takes what I consider to be a long time being that there is nothing on the HD. While in PS, and trying to edit, without even having multiple windows open, or multiple layers, it will not instantly edit in the preview window. If and when it decides to edit the computer, then it prompts the color wheel buffer. I specifically told the guy at the store exactly what I would be using it for - to only run the Adobe programs and CC. Since owning the iMAC, I have updated the suggested programs from the apple store and had the most recent OS updates.
    The model number of the computer: A1418 any help would be greatly appreciated! If I don't have the correct model I need - I will gladly make the unsaid large retail giant take it back, one way or another.

    Here is the EtreCheck results:
    EtreCheck version: 1.9.11 (43) - report generated May 25, 2014 at 8:54:13 AM PDT
    Hardware Information:
              iMac (21.5-inch, Late 2013)
              iMac - model: iMac14,3
              1 2.9 GHz Intel Core i5 CPU: 4 cores
              8 GB RAM
    Video Information:
              NVIDIA GeForce GT 750M - VRAM: 1024 MB
    System Software:
              OS X 10.9.3 (13D65) - Uptime: 0 days 11:37:57
    Disk Information:
              APPLE HDD HTS541010A9E662 disk0 : (1 TB)
                        EFI (disk0s1) <not mounted>: 209.7 MB
                        Macintosh HD (disk0s2) / [Startup]: 999.35 GB (969.11 GB free)
                        Recovery HD (disk0s3) <not mounted>: 650 MB
    USB Information:
              Apple Inc. BRCM20702 Hub
                        Apple Inc. Bluetooth USB Host Controller
              Apple Inc. FaceTime HD Camera (Built-in)
              Wacom Co.,Ltd. Intuos PTS
              Generic Mass Storage
    Thunderbolt Information:
              Apple Inc. thunderbolt_bus
    Gatekeeper:
              Mac App Store and identified developers
    Kernel Extensions:
              [not loaded] com.silabs.driver.CP210xVCPDriver (3.0.0d1) Support
              [not loaded] com.silabs.driver.CP210xVCPDriver64 (3.0.0d1) Support
              [not loaded] com.wacom.kext.wacomtablet (6.3.8 - SDK 10.9) Support
    Launch Daemons:
              [loaded] com.adobe.fpsaud.plist Support
    Launch Agents:
              [not loaded] com.adobe.AAM.Updater-1.0.plist Support
              [loaded] com.adobe.AdobeCreativeCloud.plist Support
              [running] com.wacom.wacomtablet.plist Support
    User Launch Agents:
              [loaded] com.adobe.AAM.Updater-1.0.plist Support
    User Login Items:
              iTunesHelper
    Internet Plug-ins:
              FlashPlayer-10.6: Version: 13.0.0.214 - SDK 10.6 Support
              Flash Player: Version: 13.0.0.214 - SDK 10.6 Support
              QuickTime Plugin: Version: 7.7.3
              WacomTabletPlugin: Version: WacomTabletPlugin 2.1.0.6 - SDK 10.9 Support
              AdobeAAMDetect: Version: AdobeAAMDetect 2.0.0.0 - SDK 10.7 Support
              Default Browser: Version: 537 - SDK 10.9
    Audio Plug-ins:
              BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
              AirPlay: Version: 2.0 - SDK 10.9
              AppleAVBAudio: Version: 203.2 - SDK 10.9
              iSightAudio: Version: 7.7.3 - SDK 10.9
    iTunes Plug-ins:
              Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
    3rd Party Preference Panes:
              Flash Player  Support
              WacomTablet  Support
    Time Machine:
              Time Machine not configured!
    Top Processes by CPU:
                   2%          WindowServer
                   0%          Creative Cloud
                   0%          fontd
                   0%          dpd
    Top Processes by Memory:
              442 MB          Adobe Photoshop CC
              188 MB          Safari
              172 MB          com.apple.IconServicesAgent
              147 MB          com.apple.WebKit.WebContent
              131 MB          installd
    Virtual Memory Information:
              4.05 GB          Free RAM
              2.67 GB          Active RAM
              397 MB          Inactive RAM
              911 MB          Wired RAM
              998 MB          Page-ins
              0 B          Page-outs

  • Hi, i am badly in need of help. i partitioned my mac hd yesterday and now the boot camp is nt working as i was using win 7 on it. i am using macbook pro 13'' 2011. plz help me. anxiously waiting for response... specially from "Christopher"

    hi, i am badly in need of help. i partitioned my mac hd yesterday and now the boot camp is nt working as i was using win 7 on it. i am using macbook pro 13'' 2011. plz help me. anxiously waiting for response... specially from "Christopher murphy"

    you can't add or mofidy partition numbers. especially not if and once you have windows installed.
    boot from Windows 7 DVD afterwards
    but first you have to tell us and Christopher what and how you partitioned your system.
    Successful setup of OS X Lion + Data Partition + Bootcamp Win7 Ult
    https://discussions.apple.com/thread/3293948
    So after many, many hours I think I've finally figured out how to successfully setup Mac OS X Lion on one partition, a seperate data partition, and Windows 7 Ultimate on a Bootcamp partition . Here is a screenshot of my setup on my 13" MacBook Pro
    Thread with suggestions on Windows backup methods:
    https://discussions.apple.com/thread/3798090
    Paragon CampTune
    Paragon CampTune is a commercial product that is designed expressly for this task. http://www.paragon-software.com/home/camptune/ It consists of a downloadable ISO that needs to be burned to a disc and booted from in order to resize the partitions costs US$19.95.
    Securing Dual-System Configuration
    Imaging is still the most affordable and robust way to secure computer data. Unfortunately Mac OS X backs up only HFS+ volumes, leaving Windows with dual-system configurations unsecured. You can permanently lose all of your data unless you have a Windows-compatible backup solution.
    Paragon’s CampTune and Paragon’s Drive Copy for Mac can secure the entire dual-system configuration. CampTune creates traditional images of volumes or entire hard disks, Drive Copy can copy them to other disks. In case of an emergency, you can restore the previously created image or copy all your data back to its original state.
    GParted Live
    GParted Live is similar to CampTune as it is also distributed as a bootable image that needs to be copied to a CD/DVD or USB flash drive. As free and open source software, distributed under the GPL, it will always be available free. Since it has more functions than CampTune, it may be harder for folks who are not as experienced with partitioning hard drives. http://gparted.sourceforge.net/
    iPartition
    Coriolis Systems' iPartition is a £29.95 ($44.95 US) utility that runs in Mac OS X and allows resizing of all of the relevant partition formats, including HFS+, FAT32, and NTFS. It provides a Mac-oriented user interface that may be easier to manage than some of the free utilities. As it is not capable of resizing the boot disk, it requires a bootable external disk or a boot DVD. (A tool to create a boot DVD is included.)
    Paragon Partition Manager
    From the makes of CampTune is a commercial tool that is similar in functionality to GParted Live, but has a more polished/friendly user interface than GParted Live. Previously only the US$79.95 Professional version supported all the features required for this, but as of version 11 the US$39.95 Personal version has also been reported to work. http://www.paragon-software.com/home/pm-personal/
    Winclone/Disk Utility
    Winclone is a free tool for creating and restoring backup images of your Windows partition. One of its key features is that it can restore to a larger partition than the one the image was created from.
    NOTE: Winclone has been discontinued, but for now remains available and capable of completing these tasks (including creating and restoring Windows 7 images).
    Winclone updated to support Lion Winclone updates and download
    Disk Utility can resize HFS+ (Mac OS) partitions, but is currently incapable of resizing NTFS partitions, so you could use it to reduce the size of the HFS+ partition and create a new larger placeholder MS-DOS (FAT) partition
    The full process would be:
    Backup Windows partition with Winclone.
    (if the new Windows partition is smaller than the old one make sure you set the preferences in Winclone to save the image as an uncompressed dmg)
    Delete old Windows partition
    Resize current Mac Partition
    Create new Windows partition as MS-DOS (FAT) in free space after Mac OS partition.
    (If the new Windows partition is smaller than the old one an additional step is required: shrink the filesystem on the image by selecting Tools->Shrink Windows (NTFS) Filesystem)
    Reboot your computer for the new Windows partition to mount properly (winclone may not restore if you don't reboot)
    Restore Winclone partition over new Windows partition
    An alternate Winclone based process is described in the External Guides section
    Native OS utilities
    MR user Kazyua reports that you can use the disk management utilities provided with the current operating systems if you want to do it manually. Windows 7 and OS X both have partition resizing functions built in. In OS X, open Disk Utility and manually shrink the mac HFS+ partition by dragging the lower right corner. Then in windows go to the start menu and type "disk management" into the search box then hit enter. You should get an overview of the drives you have and the individual partitions. Right-clicking on the partition gives an "Extend Volume" option. The Windows NTFS volume should then be extended into the free space you created with Disk Utility. This method has not worked for other users, so try at your own risk.
    Resizing under VMWare Fusion
    If you are looking to allocate more space to Windows under VMWare please refer to the following thread http://forums.macrumors.com/showthread.php?t=828182
    From http://guides.macrumors.com/Extend/Resize_Boot_Camp_Partition
    Thread with suggestions on Windows backup methods:
    https://discussions.apple.com/thread/3798090

  • Setting up Remote Desktop Apps for access from a Mac with 2FA

    Hi
    Setting up Remote Desktop Apps for access from a Mac with 2FA.
    I have a server 2012 remote access gateway, with remote apps published(which uses single signon), behind a 2FA connection (web based) and want to know if its possible to allow macs to connect to the remote Apps behind it. i cannot permanently remove any
    of the above setup as it is a requirement.
    When i connect from a mac i can login to both the 2FA and remote access web pages and see all the apps but when i click on any app it downloads it to the mac and when i try to run it using Remote Desktop App for MAC i get an error :
    "httpendpointexception: 4, The non-proxy http connection failed to connect with the message: 500 internal Server Error."
    I have tried with 2fa turned off for testing and get the same result.Does it support 2012 TSGW server? does it support Remote desktop apps? as i cant find a definitive answer on either.
    Thanks in advance for any advice.

    Hi,
    Thank you for posting in Windows Server Forum.
    From Error description it seems to be a communication issue between your Mac and your RD gateway server. If you connect from extranet, you may need Remote Desktop Gateway or a VPN/Direct Access connection to your intranet, or forward port 3389 on your router.
    500 Internal Server Error seems to be a HTTP related error. 
    The HTTP status code in IIS 7.0, IIS 7.5, and IIS 8.0
    Also, please double check the settings if you have a RD gateway implemented in you intranet.
    http://redmondmag.com/articles/2013/12/24/rd-gateway-in-windows-server.aspx
    In Windows Server 2012 R2 RD Gateway pluggable authentication is also introduced. This allows custom authentication routines to be used with RD Gateway. For example building a two-factor solution on top of RD Gateway is now possible which allows doing token-authentication
    to the RD Gateway which works seamlessly with RD Web Access or RDP file launching.
    Please check below article for more information.
    Windows Server 2012 R2 is coming what does this add to RDS – VDI
    In addition, please provide the log file from the client for further research.
    Microsoft Remote Desktop -> About Microsoft Remote Desktop -> Send log via email
    Hope it helps!
    Thanks.
    Dharmesh Solanki
    TechNet Community Support

  • Help needed choosing a new router

    Hi there,
    Our company is in need of a new router for internet traffic. Because I'm having trouble selecting a model, I would like to ask for your help on this one. Our situation is as follows:
     - Primary internet connection is a 60/10 Mbps cable connection.
     - Backup internet connection is an ADSL connection (not normally in use)
     - Currently our old DrayTek Vigor 2910 is incapable of processing more than 25 Mbps.
     - We have approximately 35 users working in our office.
     - Traffic primarily consists of web browsing, e-mail and VOIP phone calls.
    When the need arises, we would like to have the option of adding an additional cable connections for more bandwidth.
    Additionally, we would like to replace our OpenVPN server with Cisco VPN on this new router, which should handle about 5 users during daytime and 10 outside of office hours.
    I have narrowed it down to a 2900-series router because of the flexibility provided by the EHWIC slots. I have found the following models:
    Model
    WAN performance
    Realistic performance
    Cisco 2901
    25 Mbps
    167 Mbps
    Cisco 2911
    35 Mbps
    181 Mbps
    Cisco 2921
    50 Mbps
    246 Mbps
    Cisco 2951
    75 Mbps
    297 Mbps
    These performance numbers confuse me as to which model to choose.

    Disclaimer
    The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.
    Liability Disclaimer
    In no event shall Author be liable for any damages whatsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.
    Posting
    See if attachment helps.

  • Need suggestion for designing a BEx report

    Hi,
    I need suggestions for designing a BEx report.
    Iu2019ve a DSO with below structure:
    1. Functional Location u2013 Key
    2. Maintenance Plan u2013 Key
    3. Maintenance Item u2013 Key
    4. Call # - Key
    5. Cycle u2013 Data Field
    6. Planned Date u2013 Data Field
    7. Completion Date u2013 Data Field
    This DSO contains data like:
    Functional -
    Plan --- Item -
    Call# --- Cycle -
    Planned Dt -
    Completion Dt
    Location
    11177 -
         134 -
         20 -
         1 -
    T1 -
         02-Jan-2011 -
         10-Jan-2011
    11177 -
         134 -
         20 -
         2 -
    T2 -
         15-Feb-2011 -
    11177 -
         134 -
         20 -
         3 -
    T1 -
         15-Mar-2011 -
    11177 -
         134 -
         20 -
         4 -
    M1 -
         30-Mar-2011 -
    25000 -
         170 -
         145 -
         1 -
    T1 -
         19-Jan-2011 -
         19-Jan-2011
    25000 -
         134 -
         145 -
         2 -
    T2 -
         20-Feb-2011 -
         25-Feb-2011
    25000 -
         134 -
         145 -
         3 -
    T1 -
         14-Mar-2011 -
    Now Iu2019ve to create a report which will be executed at the end of every month and should display the list of Functional Locations whose Cycles were planned in that particular month, along with the last completed Cycle/Date.
    Thus based upon above data, if I execute report at the end of (say) March then report must display:
    Functional ---     Curr. Cycle --- Planned Date --- Prev. completed Cycle --- Prev Completed Date
    Location
    11177 -
         T1 -
         15-Mar-2011 -
    ---     T1 -
    --     10-Jan-2011
    11177 -
         M1 -
         30-Mar-2011 -
    ---     T1 -
    --     10-Jan-2011
    25000 -
         T1 -
         14-Mar-2011 -
    ---     T2 -
    --     25-Feb-2011
    Any idea how can I display Previous Completed Cycle and Completion Date (i.e. the last two columns)?
    Regards,
    Vikrant.

    hi vikrant,
    You can a Cube at the reporting layer  which gets data from DSO and which has these 2 extra characteristics completion date and previous cycle along with other chars and keyfigures from DSO.
    You can populate these  based on your logic in the field routine.
    Hope it helps.
    Regards
    Dev

  • I need to add new MacBooks to mac server workgroup manager. 10.9.5

    i need to add new MacBooks to mac server workgroup manager. cannot find them by mac address, name or ip. how do i add the new MacBooks. i think there is no workgroup manger programs for mavericks, so there must be a new way to create and add new clients to workgroup manager. can someone please inform me or point me to a dock that explains how thank you.

  • Suggestions for disks from Power Mac G4 Tower?

    Hello fellow Mac users,
    I still have the complete disk set for my old Power Mac G4 desktop system (it died and I've moved on to two MacBook Pros). Any suggestions for what I should do with them?
    Thanks for the advice
    Regards,
    Vicki

    Suggest you join LEM-Swap for buying & selling Mac stuff. http://groups.google.com/group/lemswap After you join, post a FS (For Sale). Be specific about what model G4 they came with, because they may only work with that model.
     Cheers, Tom

Maybe you are looking for