Need Sun WorkShop 6 update 2 for Solaris 8

Would it be possible to download an installation package for Sun WorkShop 6 update 2 for Solaris 8?
I have an old development project that I need to resurrect, and it requires this version of the Sun compiler.
Thanks,
-Ken Cooley

Object files and libraries created by WS6u2 can be linked into programs created by later versions of Sun Studio. The default template model changed in Studio 8, so you might need to add -instances=extern to CC command lines. Apart from that possibility, the only other issue I can think of would be invalid code accepted by WS6u2 that SS11 does not accept. I suggest you give Studio 11 a try, unless company policy forbids it.

Similar Messages

Where to obtain Update 3 for Solaris 10 x86

Hello all,
For some reason my smpatch is broken and won't download patches. I need to locate Update 3 for Solaris 10 x86 but with all the new changes to the website I'm completely lost and can't seem to find the download link.
Can anyone help out?
Thanks,
Rob

Hi
google "download solaris", first hit, at the bottom of the page "Looking for prior versions of Oracle Solaris?"
Here it says
"Note 1: Previous versions of Solaris 10 are no longer necessary as the latest release includes support for all Solaris 10 supported platforms and includes important enhancements not found in earlier releases."
and "Solaris 10 10/08" (aka Update 6) is the oldest available.
Note that you now need a support contract to access all patches except for patches to the "Oracle Solaris" compiler (if installed) and to the patch system.
Paul

STZBC table need to be updated correctly for DST Brazil Change.

Hi All,
STZBC table need to be updated correctly for DST Brazil Change.
I see two options to change it:
1) Create a new line for 2009 in STZBC -> Variable time zone rule in DT1 and create the transport
2) Apply SAP Note 198411 (attached) in DT1 and create the transport
I have have concern for daylight saving as according to Note 1251372 there is no standard daylight saving time in brazil .
this note mention daylight saving for 2008/2009 (i,e daylight saving time in Brazil begins on October 19, 2008 and ends on February 15, 2009.) and this note is the latest note available.
what would be daylight saving time in brazil for year 2009/2010? should i need to raise message to SAP asking for any new note applicable to daylight saving?
Thanks for your help in advance.
Thanks&Regards
Shams

done

JRE 6.0 update 1 for Solaris 10 sparc 64 bit

Will jre 6.0 come out as a patch for Solaris 10 sparc? Or should I install it from the Java download site (http://www.java.com/en/download/manual.jsp)? I currently have jre 5.0.11 (patches 118666-11 and 118667-11).
Thanks.....

Will jre 6.0 come out as a patch for Solaris 10
sparc? Or should I install it from the Java download
site (http://www.java.com/en/download/manual.jsp)? I
currently have jre 5.0.11 (patches 118666-11 and
118667-11).Yes, it's out for 6u1, or should be out by now, as sparc (125136-01 & 125137-01)
and x86 (125138-01 & 125139-01).
You cannot patch your way from 5.0 to 6. You need to install the 6 packages, and then you can install the 6u1 patch. (or you could just install the 6u1 packages, and patch from that point onward).
As to the later question, yes, there isn't a formal JRE patch, but SUNWj6rt is essentially the runtime component of the JDK, so if you just had SUNWj6rt & SUNWj6cfg installed, you would have the equivalent of a JRE, though it still would be installed in a JDK directory. If you have just those two packages installed, then you could use 125136-01 as a JRE patch, since it will only update what installed. Oh yes, I forgot about the 64bit component to the runtime, SUNWj6rtx. If you intend on running the JRE in 64bit mode (-d64), you'd need SUNWj6rtx as well.
Dave
Sun Microsystems
Message was edited by:
katleman

Need to compile C code for Solaris 5.4 target

Hi,
I'm current on a project where the target platform is Solaris 5.4. I believe the SunOS version is 2.4. Unfortunately, there is no way I can get the customer to upgrade their server or OS.
In my search so far I've been unsuccessful in finding a compiler for that platform. The oldest gcc I can find is for SunOS 2.5.
What other options do I have?
Will code compiled with the C compiler in the Sun Studio 12 be able to run on SunOS 2.4? If so, is there a command line option I need to set while compiling the code?

No available Sun compiler can be used on, or to generate code for, SunOS 5.4 (Solaris 2.4). Even Sun Workshop 5.0, released in 1998, did not support Solaris 2.4.
If you develop code to be run on Solaris 2.4, you need to compile on Solaris 2.4 (or earlier). Binaries created on a later version of Solaris will not in general run on an earlier version of Solaris. I think that Sun WorkShop 3.0 was the last version that supported Solaris 2.4, but it might have been WorkShop 2.0. Those antiques are not available from Sun.
If I were in this situation, I would tell the customer that the OS and all support software are many years past End Of Service Life. No support is available, the software is no longer available, and I can't help them unless they are willing to upgrade to supported software. (I might also ask the customer if they still use Windows 3.1 on their PCs. The situation is comparable.)
If you don't have that option, your next best hope is that the customer has a C compiler on their system. If so, find a way to use it. If it's a Sun compiler, you will have a problem acquiring a license to run it. You will probably have to run it on their system.
If the customer doesn't have a compiler, I guess you have to keep trolling in newsgroups and forums, looking for a compiler that supports Solaris 2.4. Good luck.

Need a succussion about Antivirus for Solaris

In my office we have SUN SPARC MACHINE with SOLARIS 7 which is connected by other machine (all the other machine OS are in Windows). I am affraid of virus. Can anyone give good idea or good antivirus which take care of all virus.
Thanks in advance.
Dwarak

Hello,
I don�t exactly understand what you ask for. Are you looking for an antivirus to protect your Solaris box? If this is your problem, don�t be afraid of it, because windows viruses won�t afect Solaris. There�s no virus problem with Solaris.
Other thing is virus transmision. For example, IIf you get an infected email on Solaris and send it to a user with Windows, it will receive the virus. In this line, and considering that Solaris machines are usually email servers, gateways, etc... some companies have developed Antivirus Gateways for filtering all incoming and outgoing viruses (for example, a gateway like this would work like a virus firewall on a corporate email server, so the users won�t receive any infected network traffic).
Also most antivirus companies, considering Solaris stability, availability, etc... have developed antivirus servers for solaris, that act like a central server for the windows clients for actualizations, cleaning shcheduling, etc...
You can take a look and learn about this, for example at trend-micros web page:
www.antivirus.com
If you have other needs just post them. Bye,
Joseba M. Iturbe

Need Adobe Reader 9.x for Solaris 10 x86

There used to be a link on your web site for the Solaris 10 x86 download for Adobe Reader 9.x products. Could you please send me an updated link or an alternative method of downloading the Solaris intel version of Adobe Reader? Would prefer the link comes directly from Adobe since verification is needed that it is from a trusted source. Thanks!

Hi,
there is no actual release of Acrobat Reader
ftp://ftp.adobe.com/pub/adobe/reader/unix/
later then Acrobat Reader 4 for Solaris x86
ftp://ftp.adobe.com/pub/adobe/acrobatreader/unix/4.x/sunx86-ar-405.tar.gz.
All posts that announce Solaris x86 support for release 8 are untrue.
The only working extended Pdf-Editor (comparable to Adobe Acrobat XI)
for Solaris x86 at the moment is PDFStudio Java
http://www.qoppa.com/pdfstudio/buy/
Best regards
Axel Arnold Bangert - Herzogenrath 2013 - Solaris 10 (x86)

Need a simple UPDATE statement for updating areas of the polygons

Hi,
I need a simple UPDATE SQL statement for updating areas of the polygons in a table shema.table (geom) with sdo_area function.
Dejan

Dejan,
Maybe I don't understand your question but I will offer this:
update SOME_TABLE t set t.areasqft = SDO_GEOM.SDO_AREA(GEOM, 0.005) where t.geom.GET_GTYPE() = 3
This assumes a "feet" based SRID.
r,
dennis
Edited by: user633187 on Dec 1, 2008 9:04 AM

Sun Java Wireless Toolkit for Solaris

I dont see the SJWTK for Solaris in list update of NetBeans, only 2.1.
However, in the site already exists version 2.5.X., but Linux and W32, why?

I also wanted to use JWT 2.5.2 on Solaris but it seems there is no supporting libraries. I get the following error when trying to run the Linux ktoolbar:
Exception in thread "main" java.lang.ExceptionInInitializerError
Caused by: java.io.FileNotFoundException: /usr/local/WTK2.5.2/wtklib/SunOS/ktools.properties (No such file or directory)Any plans to support Solaris?
Edited by: JacoVosloo on Nov 8, 2009 12:55 PM

Sun Studio 12 support for Solaris 10 3/05

The Sun Studio 12 http://developers.sun.com/sunstudio/features/sysreq.jsp page mentions Solaris 9 and 10 1/06 are supported. Will Sun Studio 12 support Solaris 10 3/05 in the future?
Why is Solaris 10 3/05 not supported or at least a patch provided to allow Sun Studio 12 to support 3.05?

I have done a poor job of explaining. The Sun Studio 12 Release Notes do specify Solaris 10 1/06. Read them. Why would Sun specify that release unless Solaris 10 3/05 was not supported? See http://developers.sun.com/sunstudio/support/support_matrix.jsp and http://developers.sun.com/sunstudio/documentation/ss12/release_notes.html#SystemReqs
Sun has gone to the trouble to list Solaris OS 9 and 10 1/06. It is not a matter of applying patches to become 10 1/06 from 3/05. It requires an upgrade.

Need a copy of acroread for Solaris 10 on SPARC

I've checked the ftp download pages and any Solaris reference to acroread is a dead link, Can someone post me a working link where I can download the latest Solaris on SPARC copy of acroread?

http://www.adobe.com/support/downloads/product.jsp?product=10&platform=Unix
I think (but not sure) that 8.1.7 is the last version for Solaris/sparc.

Patch 140476-01 breaks update manager for Solaris 9.

I just noticed that deferred patches werent being applied on my solaris 9 machines.
It turns out that patch 140476-01 which updates the certificates also manages to delete the file /etc/init.d/installupdates.
Since that shutdown script is the thing that applies the deferred patches, not surprisingly they're no longer being installed.
That file is no longer needed on solaris 10 since it got converted to a service, but its still needed on solaris 9...
It seems lately that the update connection software gets broken with monotonous regularity.
The solaris 10 version is finally working properly again after many months. But now the solaris 9 version is broken.
Not your best work, Sun...

Forum Moderator:
While most of my systems are Solaris 10, I still have one rarely used S9 system that has 140476-01 that deleted /etc/init.d/installupdates. Is there any update on when we can expect 140476-02 (presumably ....) that will fix this issue?
Thanks,
John
p.s. From my perspective, updatemanager has been working very nicely on S10_x86 for several months .... I have not experienced any of the "hanging" during the installation of multiple patches that were problematic for some time. Thank you and your updatemanager colleagues for your diligence in improving this important tool.

I need a working update link for FCP 5.1.4

I just installed an old version of FCP (5.1.4) on a rebuilt imac so I could work on an old project. The project was created using this version of FCP but when I open the project the error message tells me that the format of the project is too new for this version. Research has brought me to this end. I need the updates for this software. The problem: There is no update. 5.1.4 is as high as this version goes. I did find a link to one on Apples site, but once you get there the message is, "This page no longer exists".
Here's my question: Am I fooked?
If the project was created in the same version, what the heck is making it 'newer'.
When I rebuilt this iMac, I did move to Snow Leapord...but that wouldn't change the project nor would it change the version of FCP...so again, am I fooked?
Thanks,
B. Rabbit

...yes, I knew that there are no more updates. I was hoping for a super-secret workaround...since the project was originally created in the exact same version that I'm trying to open it in, there might be a bug that someone has figured out.
Precisely why I use PPro now. FCP is a headache at best...but this...there is no logical reason why this would happen.
...borrowed a friends macbook pro w/ FCP 7, it opened...migrated the XML files to PPro...all done now.

Need compiled pam_allow.so.1 for Solaris 10

I am following a document I found online to have Solaris 10 automatically login the console server using JDS3. I need the pam_allow.so.1 module in order for this to work. This module is no longer included with Solaris 10. Does anyone know where I can get a compiled version of this module that will work on Solaris 10?
Thanks,
Chris

I have found the source on opensolaris.org, but I am unable to compile it. When I try, the following is returned: /usr/ucb/cc: language optional software package not installed.
Would it be possible for someone else to compile it for me and then I just put it in place on my server, or does it have to be compiled on my server to work?

NEED TO PURCHASE DFP AGENT FOR SOLARIS

I CAN'T FIND INFORMATION ABOUT A RECOMMENDED VENDOR THAT CAN PROVIDE A DFP AGENT FOR MY SOLARIS APPLICATION SERVERS SO I CAN SUCCESSFULLY DEPLOY DFP ON MY CSS.
ANY IDEA/INFO WILL BE APPRECIATED...
THANKS
MANUEL

I think you need to be registered user to download this. Some other related info : http://www.cisco.com/en/US/products/sw/iosswrel/ps1833/products_feature_guide09186a0080086f25.html

Need Sun WorkShop 6 update 2 for Solaris 8

Similar Messages

Maybe you are looking for