Need symble in output

Need the Symbol name to be on the invocies that we send by email to our customers. This should be on all output types for Contracts,Hardware T&M and Spare Part invoices. The output types are ZUSC,ZUSI,ZD01,ZD27 and ZCAI.
Give me the suggestion

Hi jai,
If you want the company logo to be in the output of the invoices then it needs to be set in the smart forms. All the output types you have give are customised output types, so please contact the person incharge for smartforms in the ABAP team and they will be able to help you.
Hope this clarifies your question.
<REMOVED>
thanks
regards

Similar Messages

Need to configure output type for adobe form

Hello All,
I need to configure output type for Adobe Form thru NACE. What would be print program and how do I call my form from that program? and, what would be the FORM routine for that form in NACE?
I'm little confused, Pls I need your help.
Thanks in advance,
Chandra

Hi,
Just before few weeks we did this task.
Say for example if you want to print PO details through ADOBE form instead of normal sapscript layout or standard MEDRUCK, you can follow the following steps.
1. Design the form in SFP tcode, by passing the necessary inputs through form interface.
2. Then use tcode tcode NACE and select EF as application and click output types button on the application tool bar. Select NEU output type and double click processing routines on left side.
3. Then, in the right side of the screen we can see the calling program and the form (may be sapscript or smartform) whatever used.
4. For form names we have two options in NACE tcode.
One is Form and the otherone is PDF/Smartform Form. If you are using adobe form give your form name under PDF/Smartform and also select PDF under the type option in the same screen.
This worked perfectly for us. But pass the required parameters to the form from the routine used in standard program.
If any queries please post it.

Need formatted EXCEL output, from View Output,Oracle Applications

To view the report(Normal RDF report,not XML Publisher Report) output in EXCEL, I changed the Profile Options.
From: System Administrator Responsibility.
Navigation: Install -> Viewer Options.
Added the below entry.
PDF application/vnd.ms-excel Microsoft Excel
Now when I submit the report, after completing, when clicked to View Output, I can see the list showing Browser and Microsoft Excel.
I saved the Excel Sheet,but its not formatted. How do I get the formatted Output. As columns are not in proper shape.
Please do the needful.
Thanks.

Hi Abdul;
Please check below thread's mention metalink note&advice:
Open Text output of a Report in Excel - Bad format
Re: Open Text output of a Report in Excel - Bad format
Hope it helps
Regard
Helios

Calling Bpel Process From a Jsp(Need a string output instead of XML object)

Hi
I am calling a BPEL process(Synchrononus) from a JSP page, Where Bpel process calls a java web service.The output from Bpel process is returned as an XML object. I need the output in a string format.Please let me know the steps to get the string output.
I also executed invokeCreditRatingService.jsp(from samples shipped with SOA Suite) that calls CreditRatingService bpel, but i was getting the following output where the rating value is printed as an XML object.
Output:-
BPELProcess CreditRatingService executed!
Credit Rating is oracle.xml.parser.v2.XMLElement@9511c8
Please let me know, what changes i need to make to get the string output.I followed all the steps given in "orabpel-Tutorial7-InvokingBPELProcesses.PDF" to execute credit rating jsp.
We are using SOA Suite 10.1.3.1.0 version.Do I need to make any changes to the code, to make it work with this version.
Thanks
Vandana.

The call payload.get("payload") returns, as you have observed, an XMLElement. You can simply convert the XMLElement into an XML string by using a DOMSerializer implementation. The following code is very useful for this purpose:
http://javafaq.nu/java-example-code-432.html
Best,
Manfred

Help needed in the output file

Hi
Here is my query,
DECLARE
vProduct VARCHAR2(100) := 'Prints';
vProduct1 VARCHAR2(100) := 'Pk';
vName VARCHAR2(100) := 'Photos';
vName1 VARCHAR2(100) := 'B';
BEGIN
DBMS_OUTPUT.PUT_LINE('Product '||' '||'Name');
DBMS_OUTPUT.PUT_LINE('----------------------');
DBMS_OUTPUT.PUT_LINE(vProduct ||' '||vName);
DBMS_OUTPUT.PUT_LINE(vProduct1 ||' '||vName1);
END;
Product Name
Prints Photos
Pk B
But i need the output as like this
Product Name
Prints Photos
Pk B
With a tab space between each values even i have different lengths in the value.
Is this possible ?

Ok Rob Thanks..........
Its worked fine

HP Envy 700-056 needs s-video output

problem: s-video output needed on this HP Envy 700-056 machine
any suggestions? e.g. a PCI card with s-video output?
This question was solved.
View Solution.

Hi,
Are you looking to capture input video or just output?
S-Video graphics cards are pretty much out of manufacture. Look for a NVIDIA GT 9500 if you want output. MS Windows 8 does show compatibility with the NVIDIA GT 9500. There are several GT 9500 models listed as compatible.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

PLEASE NEED HELP WITH OUTPUTTING HDV/DV!! 16:9 to 4:3!! NEED HELP NOW!

ok. I started out with HDV footage. Imported that edited it native HD into final cut 5, didn't downconvert. Now I am trying to output the finished work onto a dv camera through firewire. At first i nested the HDV sequence into a NTSC sequence, but the video wouldn't go through to the camera, only audio. I thought it was a connection problem, but then i played some DV footage and it went to the camera fine. So then i exported the DV sequence as a quicktime movie in NTSC form, but that really cropped the 16:9 footage and made it unwatchable. How can i take the 16:9 HDV footage, and letterbox it so that it fits inside a 4:3 frame without cutting off any of the original frame, and then export that to a DV camera? Let me know if you need more info, please help this is due tomorrow!! ahhhhh!

When you Export using QuickTime Conversion, to DV Stream, you get an option of what the aspect ratio should be. Select 16:9 and the DV stream will be what you're looking for. Opening that in FCP and sending it to the camera should work out well.

IDOC to Flat File and XML ( Need both the Output)

Hi ,
My Scenario is IDOC to File .
I need o/p in 2 format . ie, 1) Flat File 2 ) XML file
I have a plan to go with Interface determination , 2 IM and what shd be the condition ?
or Else 2 Receiver detmination but condition ?
How to slove this ?
Need the Output from Idoc in 2 format ( Flat file and XML file )
Any Blog , Thread ...Tips...etc
Regards,
Jude

Hi Jude,
Do like this:
1. Create two inbound Service Interface (with the same target Message Type)
2. Create separate Operation mapping with the above service interfaces as target (with the same source service interface)
3. Create Interface Determination and include these two operation mapping (without any condition)
4. Create 2 receiver agreement (with two separate communication channel) for each of the target service Inetrface. In one channel use content conversion and the other one will give you normal XML output
Regards
Suraj

Need help with output for D5

Hi,
I need some help getting my film in sync to a D5.
The film was shot on MiniDV and edited drop frame (29.97).
What we did first is output on miniDV and dubbed that to a D5 for color correction. Everything was in sync with the timeline. Then my friend color corrected. Since then several shots have been replaced, not effecting the timing at all. We checked that everything was hitting at the same timecodes and everything was cool.
Now I've output another tape onto MiniDV and tried to dub it to D5 but the shots are not hitting at the same timecode. They assure me that everything is drop frame on their end. Not sure what might be causing the problem. Not sure what to try next?
Need suggestions and ideas.
thanks.

if you had a downconvert from your "color corrected d5" you could place it in the timeline and see whats up.

What do I need to setup output to TV monitor?

I am working on a Mac Pro from around 2009 with a ATI Radeon HD4870 graphics card. What Would I need specifically in order to output from Premiere Pro to a TV monitor? Any help is appreciated, thanks!

Blackmagic Design, AJA, Matrox and Bluefish444 all make I/O devices that work with Premiere Pro.

PDF saved as 1.4 need to re-output as pdf 1.3 ???

Im trying to insert a PDF in a program and it tell me:
"the document was imported successfully, but may not look as intended.
You may get better result if you can arrange for the PDF to be re-output as PDF1.3 or earlier, or PDF/X-1a."
i noticed under properties the pdf document is saved under PDF version 1.4 ... is there a way of saving as a different version on converting the PDF?
I did not create the PDF though, would the person who did have to save it under a different version and resend ?
Help..

If there's no problem when it's displayed, then don't worry about it. There's nothing you can do with Reader anyway. You'd need something like Acrobat to modify the document.

MacBook need to add output sound

Hi I have an Macbook 10.4.10 and the output is not working. In the System preferences, the device is digital out...Built-in output. But it says the selected output has no out put controls. What is up? I have no sound and the volume control will not work at the top of monitor or on volume bottons.
:)Sara

Is it possible to use these system discs to install on a new drive, for this macbook if I upgrade my iMac to 10.6?
No. The system discs that shipped with your iMac will only work on that model of iMac and will not install on your sister's MacBook.
However, she can do one of two things: 1, call AppleCare and request replacement system discs (she will need her Mac's serial number) or 2, buy Snow Leopard for herself and install it on her new hard drive. If she does 2, she will need to purchase the iLife applications (iPhoto, etc.) separately, so I recommend 1.

Need help with output type EDI for ERS

All,
I want to be able to run and ERS settlement and have the invoices created sent via EDI/XML to the supplier.   I have several questions on the set up.
1) I have output type ERS6 which is defined as ERS EDI. I assume because it does not start with Z* this is SAP standard, so I shouldn't have to modify any of this.
2) I've added my supplier to this output type.
3) I assume I need to create a partner profile for this supplier? If so can someone tell me the message type to use?
Is there any set up I'm missing in this process?   I've executed ERS but do not get an idoc and I'm fairly certain it's because I haven't done the partner profile set-up.
Thanks for your help.
Sandra

Hi,
You don't have to modify thise setup unless you have any customized requirement.
You are missing partner profile setup.Carry out the setup and run MRRL tcode to create the idocs
Enter the following values using tcode WE20.
Field                                       Value
Message type                         GSVERF
Partner type                             LI (vendor)
Partner function                        LF (vendor)
Port                                         SUBSYSTEM ( Port to your middleware)
Output mode                            such as Collect IDocs
Basic type                                GSVERF01
Application                                 MR
Output type                                ERS6 or the type you have defined
Regards,
Karuna

Subquery results need help with output

Requirements:
There is request to dump every days data from one table into text file.
Tables:INSPECTION_RESULTS
NJAS
Primary Key: RES_SYS_NO
Parent table: INSPECTION_RESULTS
Child table: NJAS
Purpose:
1. obtain output results for the MIN and MAX RES_SYS_NO from INSPECTION_RESULTS table for yesterdays date.
2. Create comma delimited file for following columns using above table data output.
Script thus far:
SELECT NJA_RES_SYS_NO||','||NJA_TEST_REC_NO||','||NJA_LIC_ST_ID||','||NJA_ETS_ID||','||NJA_SW_VER||','||NJA_TECH_ID||','||NJA_VIN||','||NJA_LIC_NO||','
||NJA_LIC_JUR||','||NJA_LIC_SRC||','||NJA_MODEL_YR||','||NJA_MAKE||','||NJA_MODEL||','||NJA_VHCL_TYPE||','||NJA_BODY_STYLE||','||NJA_CERT_CLASS||','||
NJA_GVWR||','||NJA_ASM_ETW||','||NJA_ETW_SRC||','||NJA_NO_OF_CYL||','||NJA_ENG_SIZE||','||NJA_TRANS_TYPE||','||NJA_DUAL_EXH||','||NJA_FUEL_CD||','
|| NJA_VID_SYS_NO||','|| NJA_VRT_REC_NO||','|| NJA_ARMSTDS_REC_NO||','|| NJA_RSN_F_N_TESTABLE||','|| NJA_DYNO_TESTABLE||','||
NJA_CURR_ODO_RDNG||','|| NJA_PREV_ODO_RDNG||','|| NJA_PREV_TEST_DT||','|| NJA_TEST_TYPE||','||
NJA_TEST_START_DT||','|| NJA_TEST_END_TIME||','|| NJA_EMISS_TEST_TYPE||','|| NJA_TEST_SEQ_NO||','
||NJA_LOW_MILE_EXEMP||','||NJA_TIRE_DRY||','|| NJA_REL_HUMID||','|| NJA_AMB_TEMP||','||NJA_BAR_PRESS||','|| NJA_HCF||','||
NJA_GAS_CAP_ADAP_AVL||','|| NJA_GAS_CAP_REPL||','|| NJA_OVERALL_GAS_CAP_RES
FROM NJAS
WHERE NJA_RES_SYS_NO IN (SELECT MIN(NJA_RES_SYS_NO) FROM INSPECTION_RESULTS WHERE NJA_RES_SYS_NO IN
(SELECT MAX(NJA_RES_SYS_NO) FROM INSPECTION_RESULTS, (SELECT SYSDATE-1 FROM DUAL))
It works but not sure if I am getting accurate results. Can anyone help me fine tune this subquery script? Thanks!
Scott

Duplicate post
See my answer in your other posting here Re: need help with script

Need batch as output

Hi Expert,
in a function module am passing all the required input parameter but i need the BATCH as output parameter,but in table paremeter it is return as blank .please help me in this regards. FM is vb_batch_determination
Regards
Swaraj

HI,
I am using the material from MCHB table which is batch managed
Regards
Swaraj

Need symble in output

Similar Messages

Maybe you are looking for