Need systemboard Qosmio F30-111

Hello,
I need a new systemboard for a Qosmio F30-111?(PQF30E-00Z00QDU). The videocard is defective. I live in the Netherlands and it is impossible to find a new systemboard. Can somebody help me to find one or companies who can fix it like they do in the UK. In the UK you have a company who can fix it without replacing the mainboard (http://www.laptoprepair1.co.uk/laptop-vga-video-repair.html) but they only repair it for citizens in the UK only.
Thanks in advance,
Charles

Wait a moment buddy. This is international forum and here are so many people from different countries all over the world. Why should someone from South Africa or Columbia search such company for you?
You know your language and use Google to find this. Nederland is small country and it is possible that such company does not exist. Maybe you will have more luck in Germany.
Ok, at the end I hope someone will have time to search it for you.
Good luck!

Similar Messages

Raid Drivers for Linux - Qosmio F30-111

Good morning
I have a Qosmio F30-111 and i need the drivers for the Raid controller for Linux. Can anyone help me.
I have RAID-0 and the notebook doesn't boot. It shows the logo of XP and them reboots. So i need to boot from cd or pendrive to acess or repair the raid partition.
Thank you
Antonio Jose

Sorry to say but I don't have more knowledge about this matter.
So can you help me !!!!
Means give me some information about this product.
I will gonna very happy if you Help Me!!!
Thanks in advance

Need traditional BIOS update for Qosmio F30-111

I would like to get the traditional BIOS update like described in BIOS update FAQ. I don't have windows installed for updating it. (and I don't want to install it)
Can someone supply it? 3.90 version.
Thanks

Hello
if you do not want to install windows and you need to run the bios update windows software , then you can try this method
Instructions
1. download the BIOS
2. Unzip to root of USB flash drive (formatted as FAT32) {"P0041v390.exe" is inside "bios-20080505133719.zip" v3.90}
3. Unplug the USB flash drive and power down.
4. Insert the 32 bit Vista DVD and boot from it (you are not actually going to end up installing it or doing anything, this just gets you to the 32 bit WinPE environment)
5. Click through until you get to the screen with the activate online checkbox and uncheck it.
6. Connect the USB flash key to the computer
7. Press Shift-F10 to open a command prompt
8. Change to the correct drive for the USB flash drive
9. type "P0041v390.exe" {or what ever} and press enter
10. after the flash is complete, before letting the machine restart, EJECT the DVD. (remember, nothing was installed and nothing really happened except you had access to a 32 bit WinPE environment which you needed to flash the BIOS).
{color:#ff0000}I did not try this method , try it and tell me
{color}
good luck ;)
Message was edited by: ADMIN

Message appears Raid-1 is degrade in Qosmio F30-111

hello,
sorry for my english.
I have a problem with my notebook when turn on show me a massage "Raid-1 is degrade" and cant use the recovery cd why show me this massage again. I can run windows xp mce.
help me please.
thankss

Hi, I have a similar problem. The way I got round it was to remove one of the hard drives and then run the product recovery disk with only one hard drive in the system. But the next problem I had was that after running the product recovery when the windows set up started a blue screen with a lot of Jargon came out. Maybe someone can help out from there cos I'm stuck

Need USB drivers for Qosmio F30-112

plz.... I need USB driver for Qosmio F30-112
coz USB does not work properly

Hi mate,
your description is really, really short. Could you please describe more detailed WHY ITS NOT WORKING and what you have attached at your USB-ports.
I ask it, because USB under XP/Vista does not need any drivers. By the way ,which operating system is installed on your machine?
Greetings

Need RAID Driver for 64-bit WXP - Qosmio F30

Hi everyone..
I'm looking tor Raid driver for winXp x64 bit...
My laptop is Qosmio F30-140
Please help me to find it..
Thanks for help..
Salam

Hello
I Have RAID Driver for Windows Vista x64
http://cdgenp01.csd.toshiba.com/content/support/downloads/raid011016vista_os2007087a.exe
try it on XP 64 i think it will work
Reaver

Re: Need mainboard for my Qosmio F30

Hi! I think it is standard problem- overheating GPU. I can remove motherboard by myself.
Where can I find Motherboard for Toshiba Qosmio F30-141 FUHSY2 A5A001825130?

Hello
I assume that Ika7 has already bought a new mainboard because the thread is from February 2009.
As Raver posted you have two possibilities:
-eBay (second hand)
-Authorized Service Provider (new part)
Furthermore the ASP can exchange the mainboard for you because its a little bit tricky and you have to remove a lot of screws.
Greets

Qosmio F30: How to: Manual Installation Of Windows Xp Media Center Edition 2005

Manual Installation Of Windows Xp Media Center Edition 2005 On Toshiba Qosmio F30 Laptop
Last Update 3 Oct 2006
Important Notes Before You Start:
1-These Steps Used For "Toshiba Qosmio F30" And For Other Qosmio Models That Comes With "Intel Centrino Duo" Cpu's And With Xp Media Center 2005 Installed.
2-Apply These Steps If You Have Previous Experience In Installing Windows Xp , If You Don't Have That Experience , Then You Can Use The Supplied Recovery Cd To Restore Your System.
3- Windows Xp Media Center Cd's Are Not Supplied With Your Laptop, If You Want To Get The Cd's You Can Buy It From Many On-Line Shops And If You Do So You Will Get Valid Windows Xp Product Key Which You Will Not Need It (Because You Already Have One You Can Find It In A Small Sticker In The Back Of Your Laptop And You Can Activate Your Windows With It).
In Other Words ( You Need The First And The Second Cd Of Windows Xp Mce 2005 SP2 Oem).
4- Do Not Try To Apply These Steps On Other Versions Of Windows Xp , Use "Windows Xp Media Center Edition 2005 Sp2 Oem" Only
5- You Must Have Usb Floppy Drive To Install "Toshiba Raid Controller" , It Can Be Installed Only By Having The Driver On a Floppy Disk And By Pressing F6 During The Installation Of Windows Xp, If You Do Not Install The Raid Driver Then Windows Xp Will Not Recognize Your Hard Disk.
6- Disclaimer of liability
I shall not be responsible or liable, directly or indirectly for any damage or loss caused or alleged to be caused by or in connection with the use of the this site or its content, including but not limited to delays, omissions, and inaccuracies in its content.
Steps:
1- Create Drivers Cd From "Toshiba Assist Utility" ,You Should See The Toshiba Assist Icon On The Desktop, Then In The Toshiba Assist Choose The 'protect & Fix' Tab ,There You Will Find The Option `Create Drivers & Tools Cd` And Insert a Blank Cd To Write It
"If This Option Did Not Work Then You Have To Install The Restore Cd To Get It Work" , The Drivers Are Installed In A Folder Called Toolscd In "C:" Drive. To Install Your Recovery Cd Power On Your Laptop And Hold "F12" And Use The Arrow Keys To Choose Cd-Rom Icon To Boot From the Cd.
2- Create Toshiba Raid Driver From The Drivers Cd, The Toshiba Raid Driver Has To Be Added During The Installation of Windows XP When Asked To "Press F6 If You Need To Install A Third Party SCSI Or Raid Driver".
In Order To Do That , Insert The Drivers Cd "from Windows " It Will Run Automatically Or Run "Browser.Exe" Inside The Cd The Select "Raid Driver" And Click On "Installation" Button, It Will Show You The Raid Driver files , Insert A Blank Floppy And Copy The Files Into The Floppy "Be Sure That All The Files Be On The Root Of The Floppy" or download the Toshiba RAID driver from the Toshiba driver download web page and extract the zip file to a floppy disk."Again, All The Files Should Be On The Root Of The Floppy Not Inside A Folder"
3- Connect Your Usb Floppy Drive And Insert Your Windows Xp Mce 2005 Cd 1 And Power On Your Laptop Hold "F12" And Use The Arrow Keys To Choose Cd-Rom Icon To Boot From The Cd.
When You Get The Message To "Press Any Key To Boot From Cd...", Press Any Key , If You Do Not Press Any Key, It Will Not Boot From Cd-Rom,Press F6 When Asked To "Press F6 If You Need To Install A Third Party Scsi Or Raid Driver".
The Setup Continues Until You Are Asked Whether You Want To "S = Specify Additional Device". Press 's' And Specify The Toshiba Raid Driver For Xp. Then Press 'enter' To Continue With The Installation.
Do Not Upgrade Your Xp Installation ,Start New Windows Installation And Partition Your Hard Disk , Windows Installation Will Ask You To Insert Cd 2, And Will Copy Some Files And Will Ask You To Insert Cd 1 Again ,Continue The Setup Until Windows finish The Insallation.
4- After Windows Finish The Installation Insert Drivers Cd And Select "Microsoft Updates" From The Drivers Cd Click On"Installation Button" ,Click "Qfe" And Install ONLY the Following Updates (Do Not Let The Updates Restart Your PC Until You Finish The Installation of All Updates)
A- Q896256
FIX "Computers That Are Running Windows Xp Service Pack 2 And That Are Equipped With Multiple Processors That Support Processor Power Management Features May Experience Decreased Performance"
B-Q910437
FIX "High Hit Count Watson Crash In Wu Client"
C-Q889673
FIX "Hardware (Dep)-Enabled Computer May Unexpectedly Quit After You Resume From Standby Or From Hibernation In Windows Xp Service Pack 2"
D-Q896243 (Very Important ,This Will Make SD And MMC Cards To Work)
FIX "ADD Support The High Speed SD Card"
Other Updates Are Not Necessary To Install, Because You Will Install It Later When You Run Microsoft Updates From Microsoft Updates Web-site After You Finish Activating Your Windows.
5- download and run "Intel(R) Chipset Software Installation Utility" from Intel website
(Restart Your PC After You Finish The Installation)
Do Not Install "Chipset Driver" From The Drivers Cd , It Is An Old Version , Try To Install The Latest From The Link Above.
6- Install The "Display Driver" From Drivers Cd (No Need To Restart).
Note : To Avoid Annoying Messages During Drivers Installation Try To Do The Following:-
Go To Control Panel , System Properties , Hardware , Drive Signing , Select "Ignore - Install The Software...."
Go To Control Panel , System Properties , Hardware , Windows Update , Select "Never Search Windows Update For Drivers"
7- Now You Have To Setup Your Internet Connection and Activate Your Windows So That You Can Run "Windows Updates" From Microsoft Windows Update Website
Your Internet Connection May Need One Of The Following Drivers (Depending On Your Modem)
A- If You Your Internet Connection Through LAN Then Install The "Network Driver" From Drivers Cd.
B- If You Your Internet Connection Through Wireless Then Install The "Wireless Network Driver" From Drivers Cd.
C- If Your Internet Connection Through USB Then Install The Driver Supplied By Your Modem Manufacturer.
D- If Your Internet Through Dial-Up Then Install The "Sound Driver" From Drivers CD , This Driver Will Install The Sound Driver And Will Activate The Modem Device and ,A Message Appeared "Find New Hardware ,Modem Device" Ignore The Message And Restart Your PC Then Install "Modem Driver" From Drivers Cd.
8- Now Go To Windows Update Web-Site And Install All The Necessary Updates "Try To Run Windows Updates Several Times Until You Install All The Updates Because In The First Time, Windows Updates Website Will Install 3 Files Only After That Restart Your Computer And Go To Windows Updates Site Again And Continue To Install The Updates , Select Custom Updates Method And Install All The Critical And Optional Updates".
9- install "Common Modules" from drivers CD This module is an essential component on Windows XP systems It is required to make other TOSHIBA original programs work properly.
10- Now Continue To Install Other Drivers And Utilities From Drivers Cd But Do Not Install The Following Drivers:-
Atheros Client Utility " No Need"
Bluetooth Monitor " Do Not Install This , Install Only The "Bluetooth Stack".
Enjoy Your Powerful Toshiba Qosmio Laptop.

you can see this tutorial also in this website
salah.coms.ph

Where can I buy motherboard for Qosmio F30-141

where you can buy a motherboard for Toshiba QOSMIO F30-141?

Hi mate
You need a special board which has been designed especially for the Qosmio F30-141.
Such motherboards and all compatible parts can be purchased from the Toshiba ASP in your country.
Here you can find the ASP:
http://eu.computers.toshiba-europe.com -> Support & Downloads -> Find an Authorized Service Provider

Qosmio F30-133 does not work correctly

Good evening.
I am seriously in need of some help with a problem with my qosmio F30.
After I include, occurs:
1. On the screen there are thin white strips. But it continues to be loaded.
2. There is a window of loading Windows XP.
3. After that the screen becomes black and the computer more shows nothing.
I have made the following:
1. Has loaded a safe mode.
2. Has disconnected video the device. (Nvidia GF 7600).
3. And the computer was loaded from video by the device - standard.
4. After inclusion of video of the device and updating of options of the screen, the problem appears again.
5. Driver updatings has not helped.
In what there can be a problem? What can I make?
Kind regards.
P.S. Excuse for my English(
upd.
I esteemed a forum and have found a lot of interesting about a similar problem.
- White strips on the screen appear at loading XP. They are absent on the Toshiba splash screen.
- At connection external monitors the problem does not disappear.
Message was edited by: Alexrus
Message was edited by: Alexrus

hi Alexrus,
since windows is loading correctly as you said the problem seems to be grafics related.
so lets see what we have:
- broken grafics board > i think this is it
- broken lcd > i dont think because lights are on and you can still see anything
- bad wires > the failure should only exist in a special point of oppening of the lid > no
- a bad bios > there are always more problems if your bios is no good > no
i think this is curable by changing hardware means grafics board.
to be sure see a servicepartner and ask for assistance.

Qosmio F30-140: Cannot install Windows OS - No HDD

I've bought Qosmio F30-140 and I can't install winXP from my original cd:/ The recovery cd works great but it installs a lot of stuff I don't need so I want a clean install....
so when I run my winXP cd setup I get error message: "setup did not find any hard disk drives installed in your computer"...
though I can run windows normally which is installed from the recovery cd... I think it's something with hdd drivers.
How can I overcome this? Thanx in advance:)

Hi Sarunas
Its nothing wrong! Nothing with HDD or another hardware!
You have simply not installed the RAID driver
The Toshiba recovery CD contains the RAID driver and therefore you can install it without any problems.
But the Windows CD does not contain such driver and therefore the RAID driver must be installed at the beginning of the Windows installation setup procedure.
Windows will ask you for 3rd party RAID driver. The RAID driver you can find on the Toshiba driver page. Download it on the FDD and connect the external USB FDD drive.
From there you will be able to install the RAID driver.
Good luck..
PS: Search in this forum for similar postings... you will find a lot of threads about this theme...

Re: NTLDR and Qosmio f30-140

Hello fellows
My Toshiba is Qosmio f30-140 ,it came with xp windows, but I installed on it windows 7 and it was working very well for almost 2 years until i got problem with the display card started as little green dots till blank screen and these were over one year so I wanted to instal new windows 7.
So i remove my main HDD and connected it to other PC and format the C partition ,and copied windows source in the C partition and made the HDD in bois as primary boot and restart BUT i got NTLDR is missing press ctrl+alt+del to restart
*Notes*
1 - I have problem in the display card since i installed windows 7. i got the yellow triangle on it at device manager window.
2 - my screen doesn't work, it just appear the qosmio screen for one second and disappear when i start it. So i am using external LCD screen.
3 - I installed extra HDD (it has the space for extra HDD).
*I got Questions for you :*
1- How can i enable the laptop to boot from usb flash memory with windows 7 source
2- How can i instal windows 7 NOOWW ????
Thanks and appreciate any helps
Canadian shark

NTLDR error means the Windows boot system is corrupted or there are missing files.
Try holding down the Zero (0) key during power up to initiate the Recovery Partition. If it works, you can install Windows via the original factory Windows (XP/Vista).
You can install Windows from a USB Flash Drive (I guess you need at least 8GB or 16GB), but you need to make it bootable first, then prepare Windows files.
Press F12 during power up to view the boot menu, then select USB.
If it won't boot, then the USB drive was not prepared properly, or USB emulation needs to be set to "HDD" in the BIOS.

Installation of second HDD into Qosmio F30

Hi guys and gals :)
I just purchased secondary hard disk drive for my Qosmio F30 but when I opened the drive bay I found that I have a problem with drive's installation on my hands.
First I tried placing new drive into bay and gently pressing it to connect with sata data and power connectors, and it works perfectly, but it is impossible to move notebook around since drive is a bit loose in the bay and I kinda worry for my data and the drive itself.
Then I opened first bay and noticed that original Toshiba's drive is kept in place with help of some thin metal plate mount, which is secured onto both the drive and the bay with some screws.
I checked the web for any reviews of F30 model which could have photos of secondary bay in its opened state, and found some. The photos displayed the same thing Im seeing. Check this one out, it shows the secondary bay clearly (sata connectors are to the right and not visible):
http://www.ferra.ru/images/179/179520.jpg
Note a small screw hole at the left side of the bay, obviously intended for securing the similar mounting plate with secondary hdd onto the notebook. The plate which is, sadly, not included with my computer.
Does anyone here had the same problem and if yes, how did you resolve it?

Hi
As you already said the HDD needs a special frame which holds the 2.5 HDD in the bay.
Such frame and the necessary screws you could order directly from the authorized service provider which is responsible for your country.
I would recommend talking to these guys and explain what you need.
Best regards

Second HDD in Qosmio F30

How to install second HDD to Qosmio F30-141? Need some adaptor?

I dont think you will need a select bay adaptor.
I found one HDD PA3439U-2HA0 which could be compatible with the F30.
Its an S-ATA 5400rpm HDD and was designed to operate as a primary HDD or a second removable HDD in the Slim Select Bay drive of your notebook.
The second HDD bay should be placed at the bottom of the unit and should be secured only with one screw.

Qosmio F30-112 Drivers for linux

Hi,
I need help. I have Qosmio F30 - 112 and I have linux on my pc. I need drivers for the graphic card.
Thank You

Hi Coz_64,
I agree with the user above. Toshiba doesnt support linux on their computers so you have to search yourself for drivers. You should ask in Linux forum
The most users here are using preinstalled Windows version
Check also this article:
[Do you know some useful website for Linux support on PC? |http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=14]

Need systemboard Qosmio F30-111

Similar Messages

Maybe you are looking for