Need Tcode for adding additional partners for contract

Hi MMGuru's,
Is there any SAP transaction code( Otherthan ME32K) which allows us to update the partners functions by taking the contract number and purchasing organization.?.( like MEK1 which creates condition by taking contract number and line item ).
Inputs will be very helpful for my development.
Advance Thanks
Regards,
Praveen.

Hi All,
Regarding the query that i had raised ,
As such SAP has not provided any additional tcode to update the parnters  for procurement documents.
I was able to achieve the functionality using the FM ' MM_UPDATE_PARTNERS'. this FM will allow you to add/modify/delete the additional partners for the below documents ;
A     Request for quotation
F     Purchase order
K     Contract
L     Scheduling agreement
Regards,
Praveen.

Similar Messages

  • Process for Adding Additional WAE to 4.0.11 Cluster with CIFS

    I will be adding an additional WAE 612 W/ 4GB of memory to an existing single WAE 612/4GB cluster in the future. What is the best practice process for adding the second WAE to the cluster. I would like to do the WCCP configuration last. Whats the easiest way to move the policies from the existing WAE to the second wae. Is it as simple as just creating a Cluster Device Group and then adding both devices to the group. Will the second WAE inherit the settings for WAFS as well? I am not concerned about the WAAS setup.
    I don't have access to the credentials for the CIFS connection on the core WAE today so i would really like to know if i can complete this install by just copying settings from the existing WAE using the device group settings.
    I am also going to reverse the 61 and 62 settings to ensure that the inbound client connections get load balanced across the WAE properly.
    Any other things to consider?
    Thanks in advance
    Mike

    Mike,
    The edges will always reconnect to the same core unless it's not available. In 4.0.x, WCCP does not effect CIFS connections (4050 connections), only load balancing the TCP connections outside the 4050 connections. I have manually load balanced edges before via expert mode on the edge GUI, but it's fairly unwieldy. How many edges do you have? I can dig up the procedure if you want to use it.
    You can get decent load balancing by setting up both cores so they are both taking edge connections, take the old core offline (stopping the service in the GUI) for several minutes and then bringing it back up. A good number of your edges should now be on the new core and some will still be on the old core.
    Also, remember it's best practice to try and keep N+1 at your core. If you loose a core WAE in your cluster and a single Core can't handle the CIFS traffic, you will continue to get CIFS optimization.
    Hope that helps,
    Dan

  • BAPI for Updating the partners in Contract Documents

    Hi All,
    I am Using a BAPI  BAPI_CONTRACT_CREATEFROMDATA for Updating the Partners in the Contract documents by passing 'U' in the field Update_flag of the structure BAPISDHD1X.
    I am facing an issue as in the BAPI Return table : S document saved successfully
                                                                                  S No data was changed.
    Please help or give me a solution to update only partners in the Contract documents(VA42).
    Also please let me know any other BAPIs that can be used to do so.
    Thanks & Regards,
    Bhargav.

    HI,
    I am passing the right data. there is no problem with the data. My question is how do we update partners in the Contract documents. If possible can you explain with example.
    Regards,
    Bhargav.

  • Adding additional url for owa/ecp

    Dear friends,
    My requirement is to add additional domain name url for OWA for my exchange 2013. Let me explain:
    Currently my public url for OWA is mail.domain.com and now i want to add additional name like mail.domain2.com . I have added additional suffix and create users for this, now the remaining part is the url for OWA. I have created dns entries in godaddy and
    i have the ssl certificate for both the domain names. I can access the owa using the another url domain but hitting certificate error.
    Please help.

    Hi,
    From your description, the issue is related to the certificate. I would like to verify if you have one CAS server. If yes, you can create these two names in one certificate and check the result.
    What's more, here is a helpful blog for your reference:
    Configuring Multiple OWA/ECP Virtual Directories on the Exchange 2013 Client Access Server Role
    http://blogs.technet.com/b/exchange/archive/2015/02/11/configuring-multiple-owa-ecp-virtual-directories-on-the-exchange-2013-client-access-server-role.aspx
    Hope this can be helpful to you.
    Best regards,
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
    Amy Wang
    TechNet Community Support

  • VT01N User exit for adding additional field to VTTP table and populate the

    Hi,
    Can any one sujjest what is the use exit/bapi when we add(append) a custom field to vttp table to populate the incremental number  based on ship to address when we create a shipment..
    need user exit in ...............to populate data to vttp table custom field when we append......

    hi,
    check these exits for vt01n.
    Transaction Code - VT01N                    Create Shipment
    Enhancement/ Business Add-in            Description
    Enhancement
    V56USVDP                                Preparation for updating new objects for transport?
    V56USVDO                                Update new objects for transport
    V56USTAT                                User-individual definition of transportation planning status
    V56UNUMB                                Shipment number allocation
    V56UDLUP                                Obsolete as of 4.6C: Delivery Update on Delivery Routines
    V56UCHCO                                Check shipments are complete
    V56UCHCH                                Shipment processing: Check whether changes were made
    V56TDLIF                                Filter Delivery Items for Shipment
    V56SLDET                                Shipment processing: Leg determination
    V56MVT04                                Extensions for Collective Processing of Shipments
    V56LOCID                                Shipment Processing: Determine Location Identification
    MV56AINI                                Initialization of transaction control for transportation
    V56AFCCH                                Shipment processing: Check function code allowed
    V56AGTAR                                User Exit for Filtering Shipping Unit Calculation
    V56ARCHV                                Customer-spec. checks for archiving shipments
    V56ATKTX                                Change the number of lines for text input in shipment
    V56BMOD                                 Transportation processing: Field modification
    V56DISTZ                                Shipment Processing: Determine Distance
    V56FCOPY                                Shipment processing: Copy delivery data
    V56FSTAT                                Shipment processing: Activities when setting a status
    V56L0001                                Status of Shipments for a Delivery
    V56LDELI                                Read Delivery Data for Shipment Processing
      Business Add-in
    BADI_LE_SHIPMENT                        BadI: Shipment Processing
    BADI_V56N                               User Exit for Message Determination: Shipment

  • How to add custom hotkey for adding specified component for specified parsys

    For example: I clicked anywhere on the page and press alt+shift+g.
    The result:specified component added on concrete parsys

    The usual way for adding components is by dragging them from the sidekick onto the page. You could certainly write something like this but I don't think it would be easy.

  • Adding additional field for selection criertoria for report painter

    I am trying to add a new selection criterion for a report which is created from report painter. I have run Transaction Code GRR2 and selected the library 1VK which is cost centers: absorption costing and doubled clicked on the report.
    Clicked on edit on the header à General data selection à I am looking for a option for company code but I cant find it in the list. Is there anywhere I need to flag the field company code as characteristic value or am I missing something??
    Thanks
    E

    hi,
    You might want to try add parameters in general data selection.... in addition you can add variable against this field so that it appears on selection-screen. You can look at standard SAP report for example.
    hope this helps.
    Cheers,
    Gimmo

  • Userexit or BADI for adding additional tab in MIGO screen.

    Hi all ,
       Kindly tell me as to which exit or BADI is used to add additional tab in MIGO header.
    Regards

    Hi,
    Create a program with the screen type sub-screen in SE80 and design the layout for the custom fields.
    Declare the custom fields in a Z**TOP include.
    Under the PBO method declare the program name and screen number
    Under PAI method declare the field to u2018Xu2019.
    Under the line modify method declare a flag and set to u2018Xu2019 checking for material document number by which we can set the fields to be in display mode when we open MIGO for display of material document created after doing goods receipt.
    Under the POST_DOCUMENT method write the code for appending the value to Z table along with the values of the line item (In this case production order number, material, u2026u2026.). For these values to be available here in this method use the memory concept u201CExport to memory idu201D in the method LINE_MODIFY. 
    In order to do any validations to the custom fields, go to transaction SE80 and mention the program Name created and in PROCESS ON VALUE_REQUEST create a module and provide the validations required for those custom Fields.
    In order to make the fields to be in display mode during the display of material document, create a module under PBO and import the flag value and the production order number details in the method LINE_MODIFY and if that flag = u2018Xu2019, use  
    LOOP AT SCREEN.
    IF SCREEN-NAME = 'ZZGBAGS'.
    SCREEN-INPUT = '0'.
    MODIFY SCREEN.
    ENDIF.
    ENDLOOP.Retrieve the values from the Z table matching the key field (production order number) and pass the value of the custom field on to the screen.

  • ADF to BPEL - Adding additional field for the web service call

    I have an existing ADF project that invokes a BPEL process. Recently I added 2 new fields to the bpel process and I want to populate this additional fields from the ADF when calling the bpel process.
    What is the best way to do this ? I dont see a way to regenerate the data control. Am I missing something ?

    correct, i am using the WS data control
    I manually added the 2 new fields in the ProjectName.xml and pagenamepagedef.xml files and also he necessary code in the bean class . But when i run it i still dont see the vallues passed to the bpel process.

  • ICal in Mavericks - Still sending multiple invites for adding additional invitees

    So is there an answer to this problem?
    How do I add people to a meeting without sending out a mass update to all the prior invitees?
    Similarly, on my iphone I have accidentally held down the invite and dragged it to a new time...it immediately auto-sends out a new invite...then when I moved it back, it sent out another invite.  So the poor attendees get like 3 re-invites to the same meeting for a simple mistake on my side that they should never see.
    WHERE IS THE OPTION ASKING "WOULD YOU LIKE TO RESEND THIS TO ALL CURRENT ATTENDEES?"  (with a yes and no check box)

    iCal
    http://www.apple.com/support/ical

  • Request for adding Sindhi Language for Nokia Mobil...

    I am Creative Graphic Designer and have pointed out many omitted features for Adobe’s products like InDesign, Photoshop and Illustrator, I have remained on top position in top ten participants of Features’ forum page in 2011 now am on second position by suggesting Adobe Abro Calligrapher which was missing.
    It is highly commendable that your prestigious institute of Nokia is occupying a top level in the field of Mobile system. I have an advice, which if accepted, will certainly promote the dignity of your linkage world.
    In our country Pakistan two languages viz Urdu and Sindhi are spoken which have its own alphabets. Sindhi is very old language of the world as its civilization. Sindhi language is very rich having great numbers of letters with the result anyone can pronounce any word of an other language of the world with right accent easily. Its letters are similar to Arabic language with slight difference of additional letters. If the letters / alphabet of Sindhi language are added / introduced in coming software of Nokia Mobiles, it will be great achievement of your institute on one hand and vast familiarity among mobile users, on the other.
    I have also tried to get the same result for future software of Microsoft and Adobe to promote and facilitate the user’s interest.
    I expect positive returns from your end.
    Thanks

    hi mate,
    if you are referring to the Lumia line of Nokia phones, then you will need to leave feedback with Microsoft as it is up to them, not Nokia, to add language support: http://windowsphone.uservoice.com

  • BADI for adding new approver for PO

    Hi All,
      I want to add new approver for PO but with some restrictions. Could any one give me the BADI ddetails?
    Regards,
    Bhushan V

    Hello Shiva,
    Hope you may find this useful for your scenario.
    Allow Changes to Approvers
    Use
    You can use the Business Add-In (<DS:GLOS.5C733369F735D311AE620060B03C9BBE>BAdI) BBP_CHNG_AGNT_ALLOW to activate and deactivate the adding/changing of reviewers in the workflow approval preview.
    (The appropriate pushbuttons are then shown or hidden on the user interface.)
    Activities
    To do this, implement the method AUTHORISE_FOR_CHANGE in the BAdI.
    Example
    METHOD if_ex_bbp_chng_agnt_allow~authorise_for_change.
      IF sy-uname EQ 'EMPLOYEE4'.
        ev_add_buttons_disabled = 'X'.
      ENDIF.
    ENDMETHOD.
    This example implementation makes the buttons for changing or adding approvers and reviewers inactive for the user EMPLOYEE4.
    Please Reward FULL points for useful answer.
    BR,
    -Ashwin.

  • FM for Adding Serial Numbers for an Uutbound Delivery

    Hi Experts,
       Can you suggest me a Function Module to update the Outbound Delivery with Serail Numbers? Please don't suggest the BDC method.
    Regards,
    Ravi Kanth

    Try with :
    FM : LE_MOB_DELIVERY_UPDATE
    Thanks
    Seshu

  • Approval for exceeding credit limit for particular bussiness partners

    Hi Experts,
    I am trying one approval for the Business partners for credit limit exceed.I have tried through standard Approval process by using the terms deviation from credit value as described but what should be done if  i need to set it for particular business partners.
    Also, in this standard query which i have tried i have defined the terms as :-
    Deviation from credit limit greater than or equal to 50,000 . I have set this terms for A/R Invoice. Now when i have made the invoice for rs.5000 then also it is asking for Approval.Since the Value is defined so system should not ask for approval.
    Regards-
    Mona.

    Hi Mona,
    You may try this. It may help you..
    select true from ocrd where 
    ((balance < 0) or (balance + $[$29.0.NUMBER]) < 0) and cardcode = $[ordr.cardcode]
    use squere brackets near $ sign open and close both brackets insted of round brackets.
    Regards,
    Chintesh Soni
    Edited by: Chintesh Soni on Sep 7, 2009 2:53 PM
    Edited by: Chintesh Soni on Sep 7, 2009 2:54 PM
    Edited by: Chintesh Soni on Sep 7, 2009 2:55 PM
    Edited by: Chintesh Soni on Sep 7, 2009 2:57 PM

  • Where is INCLUDE KOMKZ for adding field to Free Goods Determination ?

    http://help.sap.com/saphelp_46c/helpdata/en/0e/9e466f0e18d311ae620060b03c9bbe/content.htm
    This page is the info in SPRO for adding a field for Free Goods Determination.
    New fields for free goods determination are added in the following INCLUDES:
    Header data in KOMKZ (INCLUDE in KOMK, KOMG)
    Item data in KOMPZ (INCLUDE in KOMP, KOMG)
    I checked and the struture KOMKZ doesnt exist, only a data element exists. So... I was wondering if it´s a error in SAP Documentation.
    When u add the field in that include it will be in KOMK, I allready added a field for Pricing determination...in INCLUDE KOMKAZ, so I add also the field for Free Good in that structure...but it doesnt work, I know that in the end is just a field in KOMK, but perhaps there is some kind of validation... because Pricing determination works, but Free Goods doesn´t and I think that is because the field is in the wrong Include Structure.
    Some1 could give me a hand with this ?
    Thx

    Hi Rodrigo..
    As mentioned the include is KOMKAZ and not KOMKZ.. Just wanted to check if code has been written in the user exits to populate that fields..
    Ex:
    FORM USEREXIT_PRICING_PREPARE_TKOMK in include MV45AFZZ .
    It worked for me.
    Best Regards,
    Pradeep.

Maybe you are looking for