Need Tecra S3 Raid Driver for VISTA

I' find a lot of drivers for install vista on TECRA S3, but not the RAID DIVER. It is essential for install vista. Can anyone help ?
Thanks Mike

Maybe Vista does not need the RAID driver? I mean when installing XP on a newer machine you will have to load some drivers but not under Vista.
Did you already installed Vista on your machine?
Cheers

Similar Messages

Tecra S10-106 - 3G driver for Vista Ultimate 64bit

Hello,
I am owner of a Toshiba Tecra S10-106. Due to the fact that Vista Ultimate 64bit is much faster as Vista business 32bit, I would like to use Vista ultimate 64bit as operating system, but I can't find the 3G driver for Vista 64bit. All drivers can be downloaded from USA in english and can be used in german, only the 3G driver is missing. Can somebody else send me a download link or tell me where I can find a suitable driver for Vista 66bit?
Thanks in advance.

Hi
To enable the card you will also need to install the 3G RF Power control utility which is here at http://support1.toshiba-tro.de/tedd-files2/0/3grf-en-20090217134719.zip.
That is only half the story as I think you also need to install the Value Added Package here http://support1.toshiba-tro.de/tedd-files2/0/vap-en-20090217134137.zip as this then enables the hotkeys to turn on and off the 3G wireless card.
Hope that helps.
Regards
Phil

Need RAID Driver for 64-bit WXP - Qosmio F30

Hi everyone..
I'm looking tor Raid driver for winXp x64 bit...
My laptop is Qosmio F30-140
Please help me to find it..
Thanks for help..
Salam

Hello
I Have RAID Driver for Windows Vista x64
http://cdgenp01.csd.toshiba.com/content/support/downloads/raid011016vista_os2007087a.exe
try it on XP 64 i think it will work
Reaver

Need RAID driver for k8t master2-far package didnt come with disk driver

I bought the K8T Master2-FAR and the VIA VT6420/VT8237 Disk Driver was not included. I'm trying to install WinXP64 but I need the raid driver before I can. I went to the download section of msi and select my board but the drivers are all 32bit when i tried to use them. There are several 64-bit drivers on the msi cd under Adaptec and LSI but not sure which one of these would work for me. Can someone show me where I can get the correct 64-bit raid driver for my board?
Thanks for your time.

Hi all , I have a MSI K8N MASTER2 FAR S940 SLI MAINBOARD with 2 raptor wd and I need raid driver (for hardware raid). Help me!!!

Laserjet 3100 driver for Vista OS

Need help finding a driver for my Laserjet 3100 on Vista OS
Thanks

DA61--
Here's another idea, with a caveat.
**I do not know if it will work. Please create a restore point on your PC before attempting this.**
Here is a link to the download page for the LaserJet 3200. It is a later version of the 3100.
http://h20566.www2.hp.com/hpsc/swd/public/readIndex?sp4ts.oid=60706&swLangOid=8&swEnvOid=2093
Please let me know if you try this and how it turns out.
Best,
AlliBee
I am an HP employee, but opinions expressed here are my own.
Click the thumbs up + button if I have helped you. Mark Accepted Solution if your problem is solved. If both apply......do both.

Help I need to locate a driver for my soundblaster live 24 bit soundcard

My son has been given the following PC games for christmas:-
Command & Conquer 3,
Command & Conquer Red Alert 3,
Arma; Armed Assault,
Medal of Honour: Airborne
The problem he is having installing these 4 games is this. About half way through installation an error message appears that quite simply states "The software you are installing does not bear a WHQL signed driver. This software will not be installed".
The PC we are running is a Dell Dimension 900, that we purchased about 4 years ago, and it was bespoke.
I have run DxDiagnostics and it tells me that the driver for the graphics card is called p7.sys and the sound card are not WHQL logo'd, so how the hell do i download a driver for my soundblaster Li've 24 bit, that does? bear a digital signatre that is WHQL Logo'd. I hope you can help, me please.
Message Edited by simonwicker on 2-26-2008 2:9 PMMessage Edited by simonwicker on 2-26-2008 2:25 [email protected]

Re: Help I need to locate a driver for my soundblaster li've 24 bit soundcard? I guess you and your son are currently using windows xp. Well, what you can do is now is ignoring the WQHL pop-up window and choose the "install anyway" option during the installation of the soundcard driver, since WQHL only means the driver is tested by Microsoft and nothing more; drivers without the WQHL qualification does not mean they are bad drivers, they usually works as good as the WQHL ones.
Ofcourse you can also download the official drivers for the mentioned Soundblaster li've 24bit at Creative Labs support/download site.
here is it:
[url="http://uk.europe.creative.com/support/downloads/download2.asp?MainCategory=&Product=035&dlcentric= 025&Product_Name=Li've%2+24-bit&filetype=&OSName=Windows+XP">Creative Sound Blaster Audigy Value/SE/LS and Sound Blaster Li've! 24-bit XP and Windows Vista Pack .04.0077 (63.39 MB)?[/url]
The driver is for all Soundblaster Audigy Value, SE, LS and Soundblaster Li've 24bit, since they are all based on the CA-006 soundchip (with other words Creative Labs renamed the soundcard several times). Also this driver should be WQHL-ed (if not, choose "install anyway" option during installation of the soundcard driver). Make sure you have uninstalled the older driver before installing the new one. For troubleshooting use utilies like "Driver Cleaner" or "Driver Sweeper" (google for Guru3D and go to the site and their download section to get the utilities/tools) to clean up the junk files of the older driver that are left in the Windows OS.
Good luck and Merry Christmas!!!
Message Edited by CTman on 2-26-2008 0:2 [email protected]

Still no working driver for Vista

Heck, at this rate we may be up to RC or RC2 before a working driver is released. I stated in another post that I would not post anymore on this board until a working driver for Vista was released, but was shocked to see that the driver for my Audigy 2 has not been updated and the release schedule still states TBA!!!
For those who are interested, the Vista Transformation Pack #4 provides the best of both worlds. A very similar look to the Vista GUI and the updates, drivers and support that Windows XP offers.
Honestly, why spend over $00 for a sound card and then lose most, if not all, of its functionality just to say that you are running Vista. I know that Vista is neat, but it is a resource hog and who wants to use their motherboard's onboard sound?

Actually the latest Audigy 2 ZS driver for XP works on my Windows Vista Beta 2 build 5456.5.
I've since reactivated UAC, but not driver signing since several drivers are unsigned.
But disabling UAC got my whole Audigy 2 ZS Platinum Pro Creative cd installed, with the exception of the DVD-Audio Player. I then installed all the software updates (except the DVD-Audio), and then the latest driver for XP and the AudioConsole that is part of the install. I did need to run the driver setup twice and let it reinstall AudioConsole over the one it installed the first time.
All works except Soundfont Banks. They don't load, the Soundfont Bank Manager will keep trying to if I start it, but it's a no go. Windows uses only the Microsoft Roland Midi Synth (but it works).
All EAX stuff in AudioConsole works. The software from the cd works too, but since alot isn't being used they're mostly useless. I just use Windows PlayControl and Creative AudioConsole to control stuff.
There's a problem with Windows Media Player where visualizations only play with cd's, but not mp3's from the hard dri've. If I toggle the Audio Quality from, say, 6/44,000 to 6/48,0000 (where I leave it), then the visualizations will show for one song then deactivate again. Kind of given up on it as I'm not about to toggle that and reset everything for every song.
Haven't messed with MediaSourcePlayer yet, except to open it and turn off all the remote control stuff.
Played some games, some music, some DVD's. Stuff sounds fine. When I plug in my headphones it switches my 2. speakers off correctly.
I did need to install PowerDVD 6 Deluxe to get commercial DVD's to play. (Adult movies played fine as they're not copy protected.) Weird DRM error in WMP when it tries to play normal Hollywood DVD's. But PowerDVD plays them fine. The PowerDVD 7 Upgrade removes 6, then fails to install. So I needed to reinstall 6, then update it to 2003e again. It works.
So, it'll be nice to get drivers and software that completely work but until then the XP drivers and most of the software does work.

Compatibility of graphics driver for vista with xp

I have a HP Pavilion a6320in desktop. It came installed with Vista OS. I have now installed Win XP. Will the graphics driver for Vista: NVIDIA GeForce 6100 nForce 420, 6150 LE, 6150SE nForce 430, 7100/NVIDIA nForce 630i and 8200, also work for Win XP?
This question was solved.
View Solution.

luit wrote:
I had simply pasted the name of the graphics driver from the HP download page, that's why the names of all the differing devices appear.
I had replaced the original motherboard MCP61PM-HM (Nettle2) with ECS GeForce6100PM-M2. I tried installing winXP, but the graphics were hazy and performance very slow. Somebody suggested I need to install the graphics driver. Will the graphics driver you suggested work?
OK.
Now that is new information that you should have shared earlier with us.
You need to use all of the drivers that are available at the ECS website for the ECS GeForce6100PM-M2 motherboard. Do not use the HP drivers for the replacement motherboard.
FYI ..Once you replace the motherboard with a different brand than delivered your desktop PC ceases to be an HP desktop PC.
Best regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

I need a Wi-FI driver for Equium A100-027

I own a Toshiba Equium A100-027 with the Atheros AR5006EG Wi-Fi Adapter.The Laptop is running on Windows XP and I need some software to use the wireless adapter. Could someone help me somehow?
The Driver had a Genuiune Windows Vista but it was working slow and I've changed the OS to XP.

All you need is the right driver for WLAN card. Some special software is not necessary because you can configure WLAN using Windows WLAN settings.

Do i need a external hard drive for my pictures

Do I need an external hard drive for my pictures?

Generally, you should have an external hard drive to backup your system. If your internal hard drive is filling up, you certainly can move pictures to an external hard drive.

In need of a printer driver for an HP Photosmart 2710 on Windows 8.1 RT 32 bit.

In need of a printer driver for an HP Photosmart 2710 on Windows 8.1 RT 32 bit.
This question was solved.
View Solution.

Hi lt12345,
I understand that you are looking to use the Photosmart 2710 with Windows 8.1 RT, but are unable to locate a driver. In my attempt to locate a driver I have come up empty handed. It appears that this printer is not supported for printing from Windows RT.
Sorry to be the bearer of this bad news. Regards,
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Need SPARTAN 3E board Driver for Labview FPGA 8.5 !!!!!! Thx

HI!!I need the spartan 3e driver for labview 8.5(not for labview 8.6) for school useI try to download it from ftp://ftp.ni.com/outgoing/NISPARTAN3ELV85.zip
but this link is dead now. Could somebody send this driver to [email protected] PLZ? Thank you a lot for all in advance
Solved!
Go to Solution.

Hello,
I'm looking for same (Labview FPGA 8.5 for Spartan 3E). But it isn't available on related url now. I'll be glad if someone can help to find driver.
Best regards,

I need a floppy disk drive for old 3 1/2" disks. I have a PowerBook G4 Mac with MacOS X 10.4 operating system. What will work for me?

I need a floppy disk drive for old 3 1/2" disks. I have a PowerBook G4 with Mac OS X 10.4 operating system. What external drive will for for me?

Hi,
Providing that the old 3.5" floppies are 1.44 MB HD disks, you should be able to use a USB floppy drive.
However, if the disks are 2DD/DSDD in the 800K Mac format a USB drive is not going to work. In this case you would need a suitable semi-old Macintosh computer with a built-in floppy drive as an intermediary.
Jan

Need bootable external Firewire drive for iMac G5

I need an external Firewire drive for an iMac G5 PC with OSX leopard that I can format to be BOOTABLE. Don't know where to buy one or even if they're available. I've bought 3 different drives on eBay, thinking each was what I needed, and none were.
I'm frustrated.
Would appreciate. Any helpful info.

I use this one:
http://eshop.macsales.com/item/Other%20World%20Computing/MAU4S7H20T64/
and SuperDuper for creating a bootable clone.
(But there are others too: http://eshop.macsales.com/shop/firewire/1394/USB/EliteAL/eSATA_FW800_FW400_USB )

Need to download printer driver for 3510 with windows 10

I need to download printer driver for 3510 with Windows 10

Here is the link to the Deskjet 3510 drivers.
Please mark the post that solves your issue as "Accept as Solution".
If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
I am not a HP employee.

Need Tecra S3 Raid Driver for VISTA

Similar Messages

Maybe you are looking for