Need the Cisco ASA5520 SYS OID for the LLDP protocol

Hi :
I need the Cisco ASA5520 SYS OID for the LLDP protocol so that I can create the network connection between Cisco ASA5520 and the 3rd party networking device in this 3rd party network management management system.
Can anyone help on this?
I tried to search the web and got some LLDP MIB files but they all cannot solve the problem. What I think and I need to have now is the SYS OID number for this Cisco ASA5520.
I know that the SYS OID for ASA5520 is 1.3.6.1.4.1.9.1.670. Now I need is the SYS OID for its LLDP protocol. Can someone help on this?
Many thanks!
tangsuan

Hi Afroj Ahmad:
I think it is not due with command line. It is the lack of OID information for Cisco ASA5520 to be able discovered by 3rd party Network Management System.
If I am not wrong, the ASA5520 should have been configured correctly for providing SNMP to the 3rd party network management system (NMS) and as such, the NMS is then able to capture the the SYS OID for ASA5520 is 1.3.6.1.4.1.9.1.670 from the ASA5520.
The SNMP configuration is as below:
snmp-server host inside 172.16.0.82 community public version 2c
snmp-server host inside 172.16.8.50 community public version 2c
no snmp-server location
no snmp-server contact
snmp-server community public
snmp-server enable traps snmp authentication linkup linkdown coldstart
snmp-server enable traps syslog
snmp-server enable traps ipsec start stop
snmp-server enable traps entity config-change fru-insert fru-remove
snmp-server enable traps remote-access session-threshold-exceeded
The 3rd party NMS can capture the product OID from ASA5520 after given the ASA IP address to the NMS. It is the LLDP OID that is not included in the product OID to cause the 3rd NMS cannot link up the LAN connction between the ASA and the 3rd party switch. There is no LLDP configuration in ASA command. I believe the LLDP should be provide externally either by key in manually or upload the MIB file to the 3rd party NMS. I have tried also uploading few MIB files but all not succesfully done.
I think the direct method is just key in the LLDP OID inside the 3rd party NMS system so that the 3rd NMS can embed the LLDP information into its operation kernel then the NMS can link up the LAN connection between the Cisco ASA and its switch.
Many thanks!
tangsuan

Similar Messages

How can i get the rSAP Protocoll for Bluetooth?

I would like to integrate the iPhone into my famous Phaeton Car.
That needs the rSAP Protocoll in the iPhone.
How can i fix this?
Regards from Germany:
UG

Unfortunately Apple has not integrated this function "rSAP" into the new version.
Maybe it comes with the netxt software update.
In the meantime i'll use NOKIA again.
This is the only language, Apple understoods.
Regards from Germany:
UG

Extend Provisioning (from OIM to OID) for already provisioned resources

We use OIM 9.1.0 to provision users to several target systems, for example OID. Not all information stored for a user in OIM is also provisioned to OID (for example department or location or phone is only stored in OIM). The provisionig task automatically is created via access policys.
This works fine.
Now we want to provision some more data (including department and location) to OID. So I changed the oid connector configuration to also provision these fields. This works fine for new users (which are not already provisioned to oid).
But we also need these additional fields in OID for users which have already been provisioned in the past. How can this requirement be implemented? Is there a way to resubmit these provisiong tasks oder to automatically update the process form.

Create a schedule task which will read the data from OIM User Profile and update the process form using tcFormInstanceOperationsIntf OIM APIs.
Also create their Label Name updated task in OID Workflow (Process Defintion)

I am sending my macbook pro in for service. The warranty co says i need to send a recovery disk to have my operating sys reinstalled if needed. Are there recovery disks for my system?

I am sending my macbook pro in for service. The warranty co says i need to send a recovery disk to have my operating sys reinstalled if needed. Are there recovery disks for my system?

pammyjoh wrote:
I am sending my macbook pro in for service. The warranty co says i need to send a recovery disk to have my operating sys reinstalled if needed. Are there recovery disks for my system?
"Are there recovery disks for my system?"
Don't know. You have not told us what system you have.

OID for all the cisco network devices

Hello All,
Can anyone provide the list of OID for all the network device with device name for routers,switches, WLC, WAAS etc.
Regards,
ADM

Anshumaan,
the cisco-products-mib is what you're looking for, and should be dowloadable without having a cco account (I believe all of the mibs can be downloaded with an account).
chris

Is it possible to use the same OSSO/OID for multiple R11 and R12 instances?

Hello guru's,
We have multiple R11and R12 instances that should be configured for Oracle SSO 10.1.4.3. For OID, we are still trying to decide between OID 10.1.4.3, or OID 11g. OAM is not an option because we also also need OSSO integration with Siteminder. We will also need to SSO-enable Discoverer an Forms.
I have successfully configured SSO for a single-instance EBS R12, but not for multiple instances, let alone include R11 and other components into the mix.
Do you have any special tips, guidance or lessons learned when SSO-enabling multiple instances into the same SSO/OID?
Thanks!
Maria

Interestingly, the article talks about using the same SSO/OID for EBS, JD Edwards, Peoplesoft multiple R11 instances, but did not mention 'multiple EBS versions'. Am I just being picky or there was a reason for it not being mentioned?In Steven Chan blog (in the same link), see the following:
Comprehensive Single Sign-On Solution+
If you have one or more E-Business Suite Release 11i instances and are tired of maintaining users separately for each environment, you can create a central OracleAS 10g environment and manage all 11i users in one place.
If you have a combination of PeopleSoft, JD Edwards, and the E-Business Suite in your organization, you can use OracleAS 10g to manage users for all three environments centrally.
If you have a combination of the E-Business Suite and custom applications based on Oracle databases or OracleAS 10g technology, you can use OracleAS 10g to manage users for all applications in a single place.
Thanks,
Hussein

Is there a "Cisco Recommended" wireless headset for the SPA 504G Phones?

Hello, Is there a "Cisco Recommended" wireless headset for the SPA 504G Phones?
Please let me know. Thank you, Paul

Hi Paul,
My recommendation would be the "Plantronics Savii 700 series" which have worked consistently and without issues, you need the HL-10 Handset lifter with them which work with the SPA-500 series.
The Savii series come as DECT for when you are using it with a phone (Waaaaaaaaaaaaaay better reception than Bluetooth) and Bluetooth for when you have it synced with a computer at the same time, it also comes with combination headset connectors so you can have one over the head, or around the neck or even just hanging over the ear.
I fully recommend them with the 500 series phones.
Cheers,
David.

I need the password for BronzeZebra-guest. Please help asap

I need the password for BronzeZebra-guest. I don't know how you find this or get it but I need it now. Please reply to [email protected]

If you have Cisco Connect open it up & look around & it should show the passwords for both main & guest. At least mine did when I could access it.
Kathi

Need the password for the internet

i need the internet password for Nacho WiFi-guest

Did you try opening Cisco Connect? when mine was working (before I updated my OS to Mountain Lion) when I opened Cisco Connect it showed both the main & guest passwords & other key info.
Now if I could just get Cisco Connect udated so it will work again.
Kathi

I've only had my iphone 5s for a week. I keep getting an error message of "Server has stopped responding." I need the server to work. Does anyone know if there is a "fix" for the problem? Other wise, I probably best return for a refund and get a Samsung.

I've only had my iphone 5s for a week. I keep getting an error message of "Server has stopped responding." I need the server to work. Does anyone know if there is a "fix" for the problem? Other wise, I probably best return for a refund and get a Samsung. Thanks

sandyzotz wrote:
Other wise, I probably best return for a refund and get a Samsung.
Unlikely. Based on the complete lack of detail of the issue provided it is entirely possible the same issue would occur.
Unless and until the user provides some actual details of the problem, there is nothing the indicate that the issue is with the iPhone.

I need the Log Report for the Data which i am uploading from SAP R/3.

Hi All,
I am BI 7.0 Platform with Support Patch 20.
I need the Log Report for the Data which i am uploading from SAP R/3.
I extract the DATA from R/3 into BI 7.0 DSO where I am mapping the GL Accounts with the FS Item. In the Transformation i have return a routine on the FS Item InfObject . I am checking the Gl code into Z table for the FS Item .
I capture the FS item from the Z table then update this FS item to Infobject FS item.
Now i need to stop the Data upload if i do not find the GL code in the Z table, and generate report for all GL code for which the FS item is not maintained in the Z table.
Please suggest.
Regards
nilesh

Hi.
Add a field that you will use to identify if the GL account of the record was found in the Z table or not. Fx, create ZFOUND with length 1 and no text.
In your routine, when you do the lookup, populate ZFOUND with X when you found a match (sy-subrc = 0) and leave it blank if you don't find a match. Now create a report filtering on ZFOUND = <blank> and output the GL accounts. Those will be the ones not existing in the Z table, but coming in from your transactions.
Regards
Jacob

My ipod won't show up on my computer. I have another ipod touch, that works fine. What should I do? Do I need a different ipo usb cord for the nano?

my ipod won't show up on my computer. I have another ipod touch, that works fine. What should I do? Do I need a different ipo usb cord for the nano?

iTunes never displays the iPod in the left pane?
iTunes is shipped with a "helper application" called the "iPod Service" that runs and is used by iTunes to communicate with the iPod device. This service may be disabled.
If your system is Microsoft Windows XP and you are logged in as an Administrator:
1. Quit iTunes and, if your iPod is currently connected to your computer, safely remove it using the system tray application to manage removable devices.
2. Right click on "My Computer"
3. Select "Manage"
4. In the "Computer Management" window, left pane (tree view), follow this path:
+Computer Management (local) > Services and Applications > Services+.
5. In the right pane, scroll down to "iPod Service" and double click it.
6. If the service is listed as "Disabled" and "Stopped," change to "Manual" and "Start" it. ("Manual" will cause it to start when iTunes starts and "Start" starts the service right now.)
7. Close "Computer Management"
8. Restart iTunes and wait for it to completely come up.
9. Reconnect your iPod.
Does your iPod show up in iTunes?

I'm going next week to the usa(I'm from Brazil) and i need the logic board for Apple MacBook Pro 15" A1286 where can i get it?, I'm going next week to the usa(I'm from Brazil) and i need the logic board for Apple MacBook Pro 15" A1286 where can i get it?

I need to buy a logic board for
Apple MacBook Pro 15" A1286, but i couldn´t find online to buy it where can i get one and if it´s possible if i can have it delivered to my hotel

There are a lot of MacBook Pros with the model # A1286 - which year is your model (e.g., "15-inch Late 2011")?
The only place that I know that you might could score a specific logic board is www.ifixit.com. They may be able to ship to your hotel.
Clinton

When i plugged in my phone to my iTunes after i got the update for ios 7 everything from my icloud got on my phone so i plugged it into my itunes to try and take everything off but its saying i need the latest version of itunes how do i do that ?

rigght after i got the ios 7 update i noticed everything from my icloud was on my phone i dont want all that stuff on here so i plugged it into my computer and its saying that i need the latest version of itunes i have downloaded it twice and i am still getting the same error message. So my question is how am i supposed to download the latest version of itunes if its not working. it says for a Windows computer the update is 11.0.5 but i need 11.1 what am i supposed to do ?

you dont need computer. go to settings > icloud and turn off what you dont want like photostream/calendars/contacts. for itunes 11.1 you need to go to itunes.com and download it then install it.

I want to Facetime my Ipad from my Iphone but they are both set up with the same Apple id. Do I need to create a new id for one of them in order to facetime with the other?

I want to Facetime my Ipad from my Iphone but they are both set up with the same Apple id. Do I need to create a new id for one of them in order to facetime with the other?

You should be able to call the iPad using your Apple ID from the iPhone. When calling from iPad use the iPhone's phone number to initiate the call.

Need the Cisco ASA5520 SYS OID for the LLDP protocol

Similar Messages

Maybe you are looking for