Need the contact info

We are a new campus on iTune U(Morehead State University). I got an email recently which shows that Our iTune U application is approved and our authorized signing person (my boss) should get an email for detail instruction. However, he didn't get it. Can anybody help me? Is there a contact info of the iTune U team? I have tried to search it. I didn't find anything.

Vishal,
As always, your best point-of-contact for local iTunes U issues is your school's Apple Account Executive (otherwise known as an "AE"). This person has direct links to the iTunes U marketing and engineering teams and can vouch for your ownership of UMKC's iTunes U site.
If someone else at UMKC created your iTunes U site, it's very unlikely that Apple would provide you with that person's Apple ID and password (in fact, it's almost certainly impossible for Apple to retrieve the password). Without a valid Apple ID/password combo, it will be impossible for you to get your site's base URL and shared secret. The iTunes U team could certainly send these to you but, as they are largely based in Cupertino, they cannot know "for sure" that it's correct to do so. That's where the local Apple folks, the account executives, come in. They do know you and the other principals at your school, they can help establish that you are the new owner of your UMKC's iTunes U site for Cupertino.
Notwithstanding iTunes U, I find it's valuable to ping my AE and SE every week or so. Both of my local Apple reps are great…my current AE is Ty Beckmann (who also serves as the AE for about half of Chicago's higher ed institutions) and my SE is Jason Bruder, who has done yeoman's work for us. In a pinch, I might bug my former AE/SE (the venerable Jack McLaughlin and the brilliant Mike Miley respectively)…but both have moved on to other schools/roles at Apple, so I'd have to be pretty desperate first.
Long story short, it's good to know who is your Apple account executive and who is your Apple service engineer. If you have a bookstore that sells Macs on campus (or some entity that sells Apple stuff on behalf of your campus), someone there will -know- who your Apple AE is.

Similar Messages

  • I buy a secend hand iphone5 i need the contact information of this device first owner.

    013627009614897
    thisi is the serial number of my device.i need the contact info of first owner of this device.
    i contact him for activate my phone.

    As I said you need to:
    You need to wipe the hard disk and reinstall the OS by booting into the recovery partition and reinstall the original OS via the internet. It will ask you to enter your ID
    OS X: About OS X Recovery
    Also see:
    OS X Mountain Lion: Erase and reinstall OS X

  • If i add myself for all the contacts in the CONTACT INFO page will i get rejected by apple?

    So im setting up my itunes connect page and i need to enter contacts in the CONTACT INFO page but i just started this and its only me, i dont have anyone else with me so if i were to put myself as all the contacts will apple deny my application? also how do i know if i am exempt and stuff? please answer as soon as possible
    omet

    I didn't. Can't promise what your experience will be tho

  • HT1688 Messaging does not let me move from one conversation to another without going to the contact info of the person and choosing "send a message", then I can continue the conversation. I'm sure it's a setting I have made by mistake, but can't figure it

    Messaging does not let me move from one conversation to another without going to the contact info of the person and choosing "send a message", then I can continue the conversation. I'm sure it's a setting I have made by mistake, but can't figure it out

    Hi Elaine
    Here si what I do:
    Since I tend to message with teh same people I leave the messages available to me.  If you are in one conversation with "Karen"  and want to message with "Kathy" tap the message back arrow and select Kathy.
    As always just be careful to rememeber who you are messaging to!

  • I am new to Firefox; how do I set up for auto fill for the various forms that need the same info time and time again; thanks.

    I am new to Firefox; how do I set up for auto fill for the various forms that need the same info time and time again; thanks.

    Make sure that you do not run Firefox in permanent Private Browsing mode.
    *https://support.mozilla.org/kb/Private+Browsing
    *Tools > Options > Privacy, choose the setting <b>Firefox will: Use custom settings for history</b>
    *Deselect: [ ] "Always use private browsing mode"
    *Select : [X] "Remember search and form history"
    See also:
    *https://support.mozilla.org/kb/Form+autocomplete
    <i>[locking thread due to the age]</i>
    If you have further questions then please start a new thread.
    *[[/questions/new start a new thread]]

  • How can I undo a back up that combined the contact info from 2 different phones

    how can I undo a back up that combined the contact info from 2 different phones.

    Once you merge contacts with iCloud or any back up for that matter, it will be merged until you go through and decifer which contacts you would like to keep.
    Was it an iCloud backup?

  • When i send a contact by email the email is received but without the contact info.

    Can anyone help. it seems to work ok when i MMS but not on the email. the email is received but does not contain the contact info.

    I have the same problem.  Sought to insert a pdf into Apple Mail after editing a form pdf and only the blank form shows.  I didn't use Preview to generate the form, just Acrobat.  And, the filled in form inserts perfectly into an email when I use Outlook for Mac.  Problem only with Apple Mail.
    HELP!!

  • My iphone was stolen. I blocked it on icloud. I bought a new one. Now I need the contacts from the stolen one that is now blocked. Can I get it?

    a

    If the contacts on the old phone were synced to a mail account or iCloud account, then they will be easy to recover.  Just sign into your iCloud account on the new phone (Settings > iCloud) and then enable the 'Contacts' option.  If the contacts were stored in your iCloud account, they will now appear on the phone.
    If the contacts were stored in a mail account such as Gmail, Yahoo, etc, then add that mail account to the phone in Settings > Mail, Contacts, Calendars > Add Account.  Then make sure the 'Contacts' option is enabled here as well. 
    If that still doesn't work you may need to try to recover them from an iCloud or iTunes backup of the old phone -- do you have one of those?

  • Need admin contact info

    Hello Folks,
    Sorry to post this here but in this part of the forum i'm used to people knowing what they're talking about and being quick on the response.
    I've just posted this in a Discussions feedback area:
    http://discussions.apple.com/thread.jspa?threadID=1339617&tstart=0
    Does anyone here have contact info from a moderator or admin that can help me out getting access to my old account again ?
    Thanks,
    Jay.

    Jay, I posted it in the Lounge. A mod may hopefully contact you.
    -Dave Merten

  • Can I sync all the contact info with Ovi Suite 3.0...

    Hi!
    Is there a way to sync all my contact info from my N900?
    For example I have Skype, Google Talk and jabber account linked to almost all of my contacts, but I can not see or edit them from the Nokia Ovi Suite.
    I'm afraid that I will loose some contact information, if I use the syncing more + now it messed up with my contact in my phone and created multiple instances of some persons.

    Hi,
    FieldPoint Explorer is no longer used to configure FieldPoint systems. However, I do not think that the configuring your system in FieldPoint Explorer is causing the error.
    FieldPoint systems are now setup in Measurement and Automation Explorer (MAX).  Information on setting up FieldPoint systems in MAX can be found in the MAX help under: Installed Products>> FieldPoint. Also, I recommend upgrading to the latest FieldPoint driver and version of MAX.  The FieldPoint VI's will be slightly different when you upgrade, so there is a good chance that this will eliminate the error.
    Regards,
    Hal L.

  • When a contact gets a new phone number, I delete the old and enter the new.  Then when I text or call the old number shows up as a selection yet it's no longer under the contacts info.

    When a contact gets a new phone number, I delete the old number and enter the new number.  When I try to text or call, both the old a new numbers. One up as a selection choice, even though the old number is gone from the contact.

    That's normal behavior as the old one will remain in the memory cache for a while until it's eventually overwritten.  If it's particularly bothersome to you, you can restore your phone as NEW and this will empty the cache.

  • HT2486 can I print out the contact info for all contacts in my address book?

    I haven't found anything on support to determine if I can just take a group with 10 contacts from my address book and print it out like a CSV file or just a plank page.
    Any suggestions if this can be done?
    Thanks in advance,
    Clay Anderson

    To print out a group, select the group name of the contacts or select them holding down the Command key and clicking on each name.  Then Addressbook > File > Print > click the Show details button > select the items below in the dialog box > select the fields to print > print or print to PDF.
    Regards,
    Captfred

  • I recently moved from the US to Sweden and all my contacts are saved with their international country code prefixes. I keep getting text message errors when I send a text, but the contact info is stored correctly for each. How can I fix this?

    I receive an error message that adds the country code again. I tried it with no country code and the area code included but I still receive an error message. It only does it sometimes and not to all Sweden contacts. There is no obvious reason why it does it to some but not others. Does any know what the problem is and how to fix it? Thank you!

    Only other thing I can suggest is to reset your phone. This won't touch any data or settings:
    Press the sleep/wake button & home button at the same time, keep pressing until you see the Apple logo, then release.

  • Need right contact info for Idea

    I have a big idea for Verizon home phones.  I cannot display the idea on the idea forums due to giving the full rights up.  Is there someone that I can contact about this.  I tried to email one person but got no response.  If I don't get a response again then I will see if a different company would want to hear the idea.  Any advise that you can point me in the right direction?  Thanks

    The only thing we have here for ideas is the public forum where you can post your ideas for other subscribers to vote for. That's at :
    http://forums.verizon.com/t5/Share-Your-Ideas-with-Verizon/idb-p/ideas
    other then that you may want to contact corporate headquarters at:
    Verizon Corporate Office | Headquarters
    140 West St. New York, NY 10007
    (212)395-1000

  • Need to "publish/subscribe" my Contacts info like we could in Addressbook. Any ideas?

    Being a LONG TIME Mac User (yes, I owned a Lisa in the early 80’s and it still runs!)  I have lived thru the transition from OS 6 and 7, then 8, 9 and finally the upgrade to OSX and thru its incarnations up to my current Maverick (aka OS 10.9.4).  I am no stranger to changes on the Mac OS.  But the new Contacts file within iCloud has me lost. For many years my spouse and I would cross share portions of our personal AddressBook using that softwares publish/subscribe function. It worked great! I could have a list of his relatives/names/phones/addresses in case I needed them - and he had the same for me. With a glance he could see that my sisters middle name was Louise and she hated it. Useful info for when she was being icy to him on a phone call. <grin> We had the shared groups identified as coming from my AddressBook or his, and we could share subgroups or the entire thing as we might choose. 
    When we went to iCloud and now Maverick, there is no longer a way to share the contact info short of buying the Apple Server software and setting up our own server in house. While I might be able to justify doing so, it is a huge hassle for a very small gain in our case. So that is a last-resort solution, so far.
    I would again like to be able to share portions (groups/or sub-groups) of my contact database files with specific individuals, using something like a publish/subscribe feature that would require both parties to agree to the sharing and then once that was done, it should implement automatically and update every time an items is changed, added, deleted on the owners main copy of Contacts.  Ideally this would work thru iCloud and its “push update” function.  But just to have it working is the goal here. I really do not care HOW it works.
    Ive searched, even called a buddy who works the Genius Bar at my local Apple Store. So far, no one seems to have any suggestion other than the aforementioned Maverick Server idea.  Frankly with three computers, two printers, a few iPads and iPhones, and a couple of Apple TVs in the house, I am hard pressed to justify the time and energy running a server would require.  There has to be a better way to do this. If friends can push their Contact Info to their Android Phones, I should be able to share my Contact files with my spouse!  Thanks for your thoughts/suggestions/and hopefully for a solution.

    Is the disk cache and the memory cache enabled?
    You can check these prefs on the about:config page.
    * http://kb.mozillazine.org/browser.cache.disk.enable
    * http://kb.mozillazine.org/browser.cache.memory.enable
    To open the <i>about:config</i> page, type <b>about:config</b> in the location (address) bar and press the "<i>Enter</i>" key, just like you type the url of a website to open a website.<br />
    If you see a warning then you can confirm that you want to access that page.<br />
    Your More system details list shows two outdated Flash plugins that you should remove and update to Flash 10.1 r102 or at least remove 10.0 r45 and wait until your distribution offers a 10.1 r102 update.
    # Shockwave Flash 10.0 r45
    # Shockwave Flash 10.1 r85
    Update the [[Managing the Flash plugin|Flash]] plugin to the latest version.
    *http://www.adobe.com/software/flash/about/

Maybe you are looking for

  • I am thinking about upgrading my HTC Incredible to a Galaxy SIII

    I love my HTC camera, but constantly losing my 3g capability.  Think its just getting old.  I'm due for an upgrade.  Is the camera any good on this model?  I I saw a thread about poor signal strength.  I live in hills and use my cell for everything. 

  • Link SAP DMS to Content Server

    Hi all,  Im user in SDN community, i saw you responding some question about SAP DMS, i have the following scenario : 1.- I use SAP DMS in this moment and attach files from the server file. 2.- Actually i have KM in the company, here have many documen

  • OpenGL and ICM Color Management

    I'm looking into ways to move my plugins to the use of OpenCL and OpenGL to take advantage of the power in modern GPUs. Specifically, with the Windows GDI, ICM color management can be set up to be done automatically through calls like BitBlt(), and i

  • Sampling increase buffer size

    hello, I'm trying to sample my scxi module (SCXI-1100 32Ch analog input module) at 10Hz... so I'm taking my samples in a timed while loop... I was wondering if I had this wired correctly... I'm sampling 16 inputs of the scxi-1100... inside my timed w

  • Download transactions in user menu in Excel

    Hello, Can you please help in finding a way to download transactions which are in user menu in to an excel sheet. Please help me....... Very thanks Sujith