Need the detailed specs of HP ENVY TouchSmart 15-j063cl for changing the harddisk

hi,
I want to know the detailed specs of my computer which I bought from Costco. For example, I want to know the type of harddish interface is SATA II or SATA III, because I want to change a HDD to SSD. But I cannot find the product specs in your website. My product number is E3S19UA#ABA.
And Could I use the mSATA SSD? Because I saw there is a interface on the board but no specs which releases on the HP product website.
Thank you
This question was solved.
View Solution.

Hi
Please find the link given below might be helpful for you. Check 4 Chapter 1 Product description.
http://h10032.www1.hp.com/ctg/Manual/c03733656.pdf
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

Similar Messages

HP Envy Touchsmart 15-j063cl Microprocessor Upgrade

I was looking into upgrading the microprocessor for my HP Envy Touchsmart 15 Notebook PC 15-j063cl from the original stock Intel 4th generation Core i7-4700MQ to either a i7-4910MQ or a i7-4940MX, but I ran into an issue, which was if I could even replace the microprocessor in the first place. The product specifications page on the HP website did not provide any information concerning whether the Envy would allow a microprocessor upgrade. But when I checked the online manual (http://h10025.www1.hp.com/ewfrf/wc/manualCategory?cc=us&dlc=en&docname=c03895137&lc=en&product=54471... The title of the manual is the maintanance and service guide.
it said that the processor could be removed and replaced. To double check this I went and asked a technician through chat, but he told me that the motherboard had an integrated processor, which contradicted what the manual said. I think this is wrong because the only components of the motherboard that are integrated are the video and the Intel HD 4600 chipset, and based off of what the manual says I should be able to change my microprocessor. Basically, I just wanted to know I my processor in my computer could be removed and replaced with another compatible processor.
Any and all help will be greatly appreciated.

randomtechguy wrote:
I was looking into upgrading the microprocessor for my HP Envy Touchsmart 15 Notebook PC 15-j063cl from the original stock Intel 4th generation Core i7-4700MQ to either a i7-4910MQ or a i7-4940MX, but I ran into an issue, which was if I could even replace the microprocessor in the first place. The product specifications page on the HP website did not provide any information concerning whether the Envy would allow a microprocessor upgrade. But when I checked the online manual (http://h10025.www1.hp.com/ewfrf/wc/manualCategory?cc=us&dlc=en&docname=c03895137&lc=en&product=54471... The title of the manual is the maintanance and service guide.
it said that the processor could be removed and replaced. To double check this I went and asked a technician through chat, but he told me that the motherboard had an integrated processor, which contradicted what the manual said. I think this is wrong because the only components of the motherboard that are integrated are the video and the Intel HD 4600 chipset, and based off of what the manual says I should be able to change my microprocessor. Basically, I just wanted to know I my processor in my computer could be removed and replaced with another compatible processor.
Any and all help will be greatly appreciated.
Hi,
The cpu should be replaceable. However, the price will be extremely high and perhaps the same as for the laptop. I have seen a similar laptop with a Core i7-4900QM on ebay for around £500 and the cheapest genuine (not ES or QS) cpu for around £415.
Dv6-7000 /Full HD/Core i5-3360M/GF 650M/Corsair 8GB/Intel 7260AC/Samsung Pro 256GB
Testing - HP 15-p000
HP Touchpad provided by HP
Currently on Debian Wheeze
*Please, help other users with the same issue by marking your solved topics as "Accept as Solution"*

Msata HP ENVY TouchSmart 15-j003ed windows 8.1

Hi,
I have a Envy TouchSmart 15-j003ed wiht an msata slot. It has windows 8.1. When i put in the msata card, my laptop wont start up. I can see the drive in the bios. It look like an issue from windows 8.1. Can that be the problem?

I am facing the same issue with a HP Envy TouchSmart 15-j063cl, Windows 8.1, fully patched.
Just installing the new unformatted mSATA SSD prevents Windows 8.1 from starting correctly.
When I remove the SSD, everything is back to normal.

Can I change the graphics card on a hp envy touchsmart 20 (the intel pentium one)

I would like to change my graphics card as it is not that good. I would want a nvidia graphics card (Preferrably a gtx 660 one) but I do not know if I can change it can someone help me

Hi,
We need to know what is the model/product of your "hp envy touchsmart 20". Please check the label at the back of the machine then post back.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Envy DV7 7212nr - I need the BIOS backup file.

Hi,
I installed the Lojack software on my laptop and the windows stopped working and started showing a blue screenerror. Because of this my laptop don't work and I can’t restore or reinstall Windows.
My laptop is a Envy DV7 7212nr.
The only solution is to rewrite the BIOS chip. But the BIOS file that HP provides to download can not be written directly to the chip because it is very large and can only be used when the laptop is running normally (this is not my situation).
So I need a BIOS backup's file to get record the BIOS chip. But as I don't have this backup file, I need another laptop like mine to get this BIOS backup file.
So I need someone who has this laptop help me.
Please, if you have the Envy laptop DV7 7212nr and you know make a backup the BIOS, please send this backup file it to me.
If I do not get this BIOS backup file, I will not have to fix my laptop.
Recalling that the file that HP offers for download not work. I need the file obtained by backup BIOS directly of a laptop Envy DV7 7212nr that is running normally.
Thank you.

This is the process to rollback to working version of BIOS.
1-Immediately after powering on hold/tap the Esc key.
2-When the menu appears, tap F2 for System Diagnostics.
3-In the list of items will be BIOS Management.Use the arrow key to move down & highlight it.Press Enter key.
4-You should now have a Rollback BIOS option.Use arrow key again to highlight and press Enter key.
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

I have a MacBook Pro, 15-inch, Mid 2009. I would love to upgrade to a Solid State Drive. What is the best possible upgrade I can buy. I need the specs and even brand name. Thank you to anyone who can help.

I have a MacBook Pro, 15-inch, Mid 2009. I would love to upgrade to a Solid State Drive. What is the best possible upgrade I can buy. I need the specs and even brand name. Thank you to anyone who can help.

A 15" mid-2009 MBP RAM specifications are: 204-pin PC3-8500 (1066 MHz) DDR3 SO-DIMM.
As has been pointed out, OWC is an excellent source for Mac compatible RAM. Crucial is another first rate source for Mac RAM. RAM from either vendor will work just as well as any purchased from Apple with the bonus of being less expensive and having a lifetime guarantee.
Ciao.

I need the drivers for a touchsmart iq 770,i need the drivers in xp not vista

I need the drivers for a touchsmart iq770,i have the disc with drivers on but will not load them because the O S is windows xp,it will not load vista on there,i have down loaded the media file hp suggest but it does not work any ideas

Hiya got on the web with a wirless but cant down load the windows media center and cant play no music because havent got drivers for sound card could well be going in the bin,its bloody bugging me why i cant reload windows vista on it just goes 85% then fails does the same with windows 7,will it be hard drive or a meomey promblem,
Thanks so much for you help
Barry

How Many Memory Modules (1 or 2) Come Pre-Installed in HP Envy Touchsmart m7-j120dx?

I know my HP Envy Touchsmart m7-j120dx came preinstalled with 8GB of RAM. I purchased it last year from Best Buy. Haven't taken the back off of the laptop just yet and it's at home while I'm at work, but wanted to see if anyone can verify *how* the standard 8GB of RAM is in there at present? Two 4GB memory modules or a single 8GB memory module?
I'm trying to place an order online this afternoon to upgrade the laptop to 16GB of RAM and I'd like to know if I need to order two 8GB memory modules or just a single 8GB memory module, depending on exactly how many memory modules are in the laptop at present to make the existing 8GB of RAM I'm running.
Thanks if anyone knows the answer to this.

Okay, one more question...
The memory in my laptop came pre-stalled with 8GB of it, with the characteristics of 1600Mhz and DDR3L PC3-12800.
Replacement memory (16GB) recommended by Crucial.com for my system has 1866Mhz instead of 1600Mhz, and is DDR3L PC3-14900.
What was recommended has of course slightly higher specs of the memory than what's currently running in my system for an additional $23 over just replacing the memory with 16GB of RAM having the identical 1600Mhz and DDR3L PC3-12800 specs.
Can my HP Envy TouchSmart m7-j120dx actually do anything as far as increased performance in going with the 1866Mhz and DDR3L PC3-14900 memory or would my laptop continue to "dumb the memory down" to 1600Mhz and DDR3L PC3-12800 specs and not be able to utilize the enhanced specs of 1866Mhz and DDR3L PC3-14900?
Just trying to spend my money wisely. Thanks for any additional clarification.

Unknown devices on Windows 8.1 on HP ENVY TouchSmart 15-j078ca

Hi, my HP ENVY TouchSmart 15-j078ca is showing 5 device errors under other devices. I will copy the hardware id for the 5 devices and if someone could tell me where I can download the device drivers for these 5 devices that would be greatly appreciated.
Device 1: PCI Simple Communications Controller
Hardware ID:
PCI\VEN_8086&DEV_8C3A&SUBSYS_1963103C&REV_04
PCI\VEN_8086&DEV_8C3A&SUBSYS_1963103C
PCI\VEN_8086&DEV_8C3A&CC_078000
PCI\VEN_8086&DEV_8C3A&CC_0780
Device 2: SM Bus Controller
Hardware ID:
PCI\VEN_8086&DEV_8C22&SUBSYS_1963103C&REV_05
PCI\VEN_8086&DEV_8C22&SUBSYS_1963103C
PCI\VEN_8086&DEV_8C22&CC_0C0500
PCI\VEN_8086&DEV_8C22&CC_0C05
Device 3: Unknown Device
Hardware ID:
ACPI\VEN_HPQ&DEV_6001
ACPI\HPQ6001
*HPQ6001
Device 4: Unknown Device
Hardware ID:
ACPI\VEN_HPQ&DEV_6007
ACPI\HPQ6007
*HPQ6007
Device 5: Unknown Device
Hardware ID:
USB\VID_138A&PID_0050&REV_0060
USB\VID_138A&PID_0050

Hi:
None of the driver pages seem to be working for me.
Below are the links to the drivers you need...I got them from a business notebook which has the same hardware as yours.
PCI Simple Communications Controller:
http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=5405166&swItemId=ob_146774_1&swEnvOid=415...
SM Bus Controller: Install this driver first and reboot.
http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=5405166&swItemId=ob_123677_1&swEnvOid=415...
ACPI\VEN_HPQ&DEV_6001:
http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=5405166&swItemId=ob_124774_1&swEnvOid=415...
ACPI\VEN_HPQ&DEV_6007:
http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=5405166&swItemId=ob_127112_1&swEnvOid=415...
USB\VID_138A&PID_0050&REV_0060:
http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=5405166&swItemId=ob_134806_1&swEnvOid=415...

HP Envy TouchSmart 17 second drive installation issues

I decided to install a second hard drive beside the supplied 1TB. There is more than adequate information in
this site on the required caddy system, connector, and disassembly requirements. The second drive I installed
was a 630 GB model that I had previously used in an HP D7V 17" laptop with Vista (circa early 2008). The added
drive still included the formatting and files, but no OS, from its prior use.
The system would then not boot up; complaining that no operating system was available on the hard drive.
Apparently it was trying to boot from the second drive.
My question is: Must the added, previously used drive be blank with no previous OS formatting in order to be processed by
the supplied stock drive (running 8.1)? Any enlightenment will be greatly appreciated.

The HP Envy is the SUV of laptops
While the HP Envy TouchSmart 17 is big and heavy, it outperforms most ultrabooks
The build doesn’t feel very durable, as HP used plastic rather than metal on the body
For a big laptop, it has a respectable battery life of over 6 hours while web browsing
If there’s one thing you need to understand about laptops, it’s this: Portability will cost you. Want proof? Look no further than the HP Envy TouchSmart 17 (MSRP $999.99), a fully loaded desktop replacement that costs less than an entry level MacBook Air.
This big guy comes with a smattering of excellent specs, including a quad-core Intel i7 processor, 8GB of RAM, 1TB of hard drive space, a CD/DVD drive, a full-HD touchscreen, and even a fingerprint scanner. For $999, this is a lot. In fact, for the same price, you can get HP’s Spectre 13 ultrabook, which has a weaker processor, half the RAM, and a fraction of the storage space, but does have portability.
Read More here . http://www.techona.com/?s=hp

Solid State Hard Drive Replacement For HP ENVY TouchSmart 15-j053cl?

Hello there,
I want to swap out my current 1TB harddrive from my year-and-a-half old HP ENVY with a 500 GB solid state harddrive that I just purchased from Amazon.
Two questions:
1) Is this solid state harddrive compatiable with my computer (specs below)?
2) I want to reinstall windows onto the solid state harddrive after I install it (assuming its compatable). How can I go about putting Windows 8 on a bootable usb drive to do this? The computer does not have an optical drive and I don't have an external optical drive, so installing Windows via bootable usb is my only option.
I'm aware I can "clone" my PC onto the external harddrive if I wish, but I'd rather do a clean install if I can.
Computer Specs:
HP ENVY TouchSmart 15-j053cl
Product: E0K05UA#ABA
Solid State Hard Drive Specs:
Samsung 850 EVO 500GB 2.5-Inch SATA III Internal SSD (MZ-75E500B/AM)
http://www.amazon.com/gp/product/B00OBRE5UE/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
Please let me know any advice you may have. Also, please feel free to ask any questions - hopefully I provided enough details.

Windows 8.1 has a built-in tool to make a recovery usb drive:
http://windows.microsoft.com/en-us/windows-8/create-usb-recovery-drive
The HP Backup and Recovery app can also do it. This is a factory clean install image and any data and programs you have added will be lost. If you have an external hard drive you can also do a backup with Windows File History. Then, add the backed up files to the factory install. You can also use File History to make a system image type backup and restore it to the new drive using a repair disk but this is virtually the same as a clone, which you said you do not want.
Manual
Your service manual linked above. See page 47.
The Evo 850 is the best SSD on the market in my humble opinion and will work just fine for you.
If this is "the Answer" please click "Accept as Solution" to help others find it.

HP ENVY TouchSmart 15-j009wm Doesnt read USB Flash Drive After Downgrade to Windows 7

I Have Downgraded Installed Windows 7 Through Flash Drive But i need help. Windows 7 Doesnt read my Flash Drive anymore? It can read my USB Keyboard but doesnt read USB Flash Drive. I Have no Internet On The Computer, So that means i cant update my drivers. And i have some drivers in my flash drive i want to install, but i cant. I have read this: http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and-Software/HP-ENVY-TouchSmart-15-j040us/td-p/4576592 It doesnt do me any good anymore because i cant acces my drivers from USB

Hi: Looking at your other posts it appears you have painted yourself into a corner. Since there is no legacy or auto USB setting in the BIOS, your only option would be to remove the hard drive, put it in a USB to sata notebook hard drive enclosure, plug it into another PC so it can be read, download the applicable drivers you need and copy them to you user profile on the removed hard drive. The service manual, chapter 5 provides the removal and replacement procedures for the hard drive. http://h10032.www1.hp.com/ctg/Manual/c03733656 Reinstall the hard drive, run the drivers, and you should be good to go. These would be the drivers you need for your model... SM bus controller: Install this first and reboot. http://h20565.www2.hp.com/hpsc/swd/public/detail?swItemId=cp_127691_1 USB3: Install both of these and reboot. http://h20565.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=6943835&swItemId=ob_139250_1&swEnvOid=4058 http://h20565.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=6943835&swItemId=ob_133037_1&swEnvOid=4058

HP ENVY TouchSmart 17T-j000 Quad Ed. Upgrades/Modifications

Hello All,
My next laptop will most likly be the ENVY TouchSmart 17T-j000 Quad Edition with Windows 8 Professional. However I have several questions before I purchase this machine. I hope the knowledge base here can help.
1) Is it possible to reconfigure the laptop to use the mSATA SSD hard drive acceleration cache as the primary boot drive?
2) The ENVY TouchSmart 17T-j000 Quad Edition can be optioned with a 24GB mSATA SSD. What is the maximum memory capacity this laptop will recognize? ie, 64Gb, 128Gb, 256GB....
3) When customizing the ENVY TouchSmart 17T-j000 Quad Edition through HP's Customize and Buy, why am I limited to 8Gb of memory when selecting 24Gb mSATA Acceleration Cache?
4) Is there a limit to the memory capacity of HHDs and SSDs the ENVY TouchSmart 17T-j000 Quad Edition is capable of recognizing?
5) The ENVY TouchSmart 17T-j000 Quad Edition comes with two drive bays. What are the physical limits for hard drives in the bays? Specifically, will 15mm 2.5" HDDs fit?
6) If I purchase the ENVY TouchSmart 17T-j000 Quad Edition with an empty 2nd HDD bay, will I need to purchase additional adaptors and/or cables in the future to attach a second HDD?
I do apologize for so many questions however if I'm going to pay more than $1200 for a laptop I need to ask a few. Thank you for taking the time to read and respond.
For those interested this possible future buy is replacing an 8 year old HP Pavilion ZV-6130us Windows XP Pro SP3 with 2Gb RAM, a 256Gb primary HDD and a 2nd 1Tb HDD in the optical drive bay. The only failures in 8 years was one cooling fan 2-3 years ago and the optical drive 4 years ago. This HP has been good to me.
Again, Thanks.
-Mike

et1michaelm wrote:
Hello All,
My next laptop will most likly be the ENVY TouchSmart 17T-j000 Quad Edition with Windows 8 Professional. However I have several questions before I purchase this machine. I hope the knowledge base here can help.
1) Is it possible to reconfigure the laptop to use the mSATA SSD hard drive acceleration cache as the primary boot drive? I will pose an internal inquiry about this
2) The ENVY TouchSmart 17T-j000 Quad Edition can be optioned with a 24GB mSATA SSD. What is the maximum memory capacity this laptop will recognize? ie, 64Gb, 128Gb, 256GB.... 16GB
3) When customizing the ENVY TouchSmart 17T-j000 Quad Edition through HP's Customize and Buy, why am I limited to 8Gb of memory when selecting 24Gb mSATA Acceleration Cache? I will pose an internal inquiry about this
4) Is there a limit to the memory capacity of HHDs and SSDs the ENVY TouchSmart 17T-j000 Quad Edition is capable of recognizing? The specs are given in this Maintenence & Service Guide
5) The ENVY TouchSmart 17T-j000 Quad Edition comes with two drive bays. What are the physical limits for hard drives in the bays? Specifically, will 15mm 2.5" HDDs fit? Supports 6.35-cm (2.5-in) hard drives in 9.5-mm (.37-in) and 7.0-mm (.28-in) thicknesses. 12.5mm 2.5"HDDs will not fit.
6) If I purchase the ENVY TouchSmart 17T-j000 Quad Edition with an empty 2nd HDD bay, will I need to purchase additional adaptors and/or cables in the future to attach a second HDD? Yes. Purchase of a hard drive hardware kit will be required
I do apologize for so many questions however if I'm going to pay more than $1200 for a laptop I need to ask a few. Thank you for taking the time to read and respond.
For those interested this possible future buy is replacing an 8 year old HP Pavilion ZV-6130us Windows XP Pro SP3 with 2Gb RAM, a 256Gb primary HDD and a 2nd 1Tb HDD in the optical drive bay. The only failures in 8 years was one cooling fan 2-3 years ago and the optical drive 4 years ago. This HP has been good to me.
Again, Thanks.
-Mike
I ill let you know when the internal queries have been answered by HP.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Cannot detect any wireless networks on my HP ENVY TouchSmart m7 j120dx

Hello,
My laptop won't pick up any wireless networks at all - I'm having what seems like a few different problems:
1. Because the laptop won't pick up any wireless networks, I can't of course connect to the internet without using my ethernet cable.
2. When I try to turn my adapter on using the F12 key, all it does is toggle airplane mode - which isn't going to help me connect to the internet.
3. When I go to 'Network' under PC Settings, I can toggle airplane mode but the bluetooth is greyed out and can't be toggled and it doesn't even give me an option to turn back on my wifi adapter.
4. When I went into the Network and Sharing Center to enable the adapter that way under 'Change Adapter Settings', I couldn't even see the adapter listed there. All it showed was Ethernet and Hamachi because I use LogMeIn Hamachi on my computer.
By this point, I was like "Oh, great - the adapter might somehow not even be there even though it was last night," (I was online wirelessly the night before) so I went into the device manager and then expanded Network Adapters I only saw the same two Ethernet and LogMeIn adapters.
5. So next, I tried downloading the adapter - but the problem is, I have no idea what kind my laptop is supposed to have. Going to the download drivers section in the support area of the hp website, I found many options and none of them seemed to work. I also tried redownloading the Wireless Button Driver (whatever that's called) and that didn't work.
5. I even tried doing a system restore to a point of about a week ago - this also did not solve my problem because the same things were happening and the same things I tried above still are not solving the problem either.
I know countless other people have had the same problem(s) mentioned above (simple Google search told me that) with their HP ENVY Notebook PCs, so I'm hoping that someone can help me and finally solve this problem for me.
The model is HP ENVY TouchSmart m7 j120dx, the model number is E8A11UA#ABA, and my computer is running Windows 8.1 64-bit.
On another note, here's the names of the only 2 adapters that show up in my device manager list (one is for LogMeIn Hamachi);
Realtek PCIe GBE Family Controller (Ethernet)
LogMeIn Hamachi Virtual Ethernet Adapter (Hamachi)
The wireless was working fine before with Hamachi installed, so I doubt that has any significance.
If there's any other information you need that I did not mention above, feel free to ask me. I look forward to someone replying as soon as possible and being able to find a solution to this problem for me!
EDIT: One other thing I should mention is that the wifi in my location is working fine for every other device I try (phone, gaming console, other people's laptops/desktops, etc.

Hello dginther,
Welcome to the HP Forums!
I understand wireless is not working properly. If the issue just began occurring, I would perform a system restore. I want you to bring the computer back to the earliest restore point possible, in an attempt to dodge whatever caused the issue. Here is a document on how to perform a System Restore: System Restore
Next, please try the steps in this HP document: Troubleshooting Your Wireless Network and Internet Connection (Windows 8)
These steps should be enough to resolve the issue. If not, you can try a manual reinstall of the driver:
1. Go into Device Manager, then Network adapters.
2. Right-click on the wireless driver, and select "Uninstall".
3. Restart the computer. This will force the driver to reinstall itself.
Please let me know the results of your troubleshooting. Thanks!
Mario
I worked on behalf of HP.

Brightness not working on HP ENVY TouchSmart 15-j178ca

Hi,
Brightness was working fine on my HP ENVY TouchSmart 15-j178ca with Windows 8.1 64 bits (F2 key, F3 key and Windows brightness slider). NVIDIA GeForce Experience showed there was an update available. After doing the update I have lost all brightness control. Tried reverting to old drivers, tried hp latest drivers and even tried Intel and NVIDIA latest drivers without any success. Here's the details :
Intel(R) HD Graphics 4600 10.18.10.3304 (from hp sp63553 package)
Intel(R) HD Graphics 4600 10.18.10.3304 (from hp sp65232 package)
Intel(R) HD Graphics 4600 10.18.10.3907 (from Intel)
NVIDIA GeForce GT 740M 9.18.13.3233 (from HP sp65231 package)
NVIDIA GeForce GT 740M 9.18.13.4411 (from NVIDIA)
I have always uninstalled drivers before reinstalling new ones and my BIOS is up to date... Any ideas?
Thanks,
fcorbeil

Hi
Please find the link given below might help you in case you have already tried these steps let me know.
Link
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

Need the detailed specs of HP ENVY TouchSmart 15-j063cl for changing the harddisk

Similar Messages

Maybe you are looking for