Need the difference between Adapter Engine and Advanced Adapter Engine

Hello All,
I am new to PI 7.1. Have knowledge on how message flow goes(PipeLine steps) in the Adapter Engine of PI 7.0.
Now I have few doubts regarding the pipe line steps in PI 7.1. Whether they are similar to that of PI 7.0 or is there any change in the process? Can anyone help in explaining this difference?
Regards,
Achari

Hello All,
Thanks for the prompt responses and with best information, But apart from this,I need how an adapter(File/JDBC) works along
with AAE in PI 7.1. When does the job of File/JDBC adapter is completed and resumed in a synchronous case. That is,
File Location --> file adapter -
> XI(AAE) --> JDBC adapter --> database.
In file sender, lets suppose we have synchronous settings(Best Effort). Now when File adapter's job is finished and when it
gets back the response back from XI. Please explain step by step from starting(file adapter polling the location) to getting the response coming back to XI.
Regards,
Achari.

Similar Messages

What is the Difference between AQ adpater and JMS adapter??

What is the Difference between AQ adpater and JMS adapter in BPEL11g??
In what scenarios we go for AQ and for what scenarios we go for JMS adapter???

Go for AQ when using Oracle Advanced Queueing (the database stuff).
Use JMS when using JMS (in memory of file queues)
hth,
Peter Paul

Difference between standard benefits and advanced benefits

whats the difference between standard benefits and advanced benefits

per one of our HR consultants. Below are the additional benefits that you get with advanced benefits over SOB. Please remember OAB needed to be licensed additionally.
•     Life event management with batch processing (in addition to on-line)
•     Automation of benefit administration
•     Flex benefit plan set up
•     Reimbursement requests
•     What-if Modeling
•     Communications Triggering, requested literature etc
Edited by: Sunthar Tharmalingam on Jan 2, 2013 10:05 AM

I do video productions for a small local TV station. I use Final Cut Express to edit. I need a new video camera but am at a loss as to what to buy. I know I will get a digital camera but do not know the difference between just digital and digital HD.

I do video productions for a small local TV station. I use Final Cut Express to edit. I need a new video camera but am at a loss as to what to buy. I know I will get a digital camera but do not know the difference between just digital and digital HD. Also, I can not afford an expensive camera and need some advice on which of the available cameras would be best and also work well with a Mac. One last issue, I currently use a Panasonic #CCD camera that takes a tape. When I load video to Final Cut the audio and video are out of sinc. Go figure. Can anyone help with these questions. Karen

Hello Karen,
If you are using Final Cut Express, then look for camcorders that are AVCHD camcorders. Look especially for the AVCHD logo and specific mention of AVCHD in the specs. Most of the major manufacturers produce good quality camdcorders - Canon, Sony, etc.
Also, be aware that there are a lot of "not quite AVCHD" camcorders on the market (sometimes they say they record video as MPEG4-H.264/AVC) - buyer beware!
Most everything you are going to find on the market today is HD, which stands for "high-def".
Regarding your question about the Panasonic camcorder, it's best if you post that as a separate question, and please identify the specific model camcorder and the Easy Setup you are using in FCE.

I need to know the difference between planned SKF and Actual SKF from business view and when I can use one of them ?

I need just to know the difference between plan SKF and Actual SKF in business example and when I use one of them.
thanks

Hi Salaam,
Statistical Key Figure (SKF) is a base to allocate the cost between cost centers. Usually, common cost centers cost should allocate to respective department cost centers on monthly basis.
Some of SKFs are: Calculating floor rent on SFT, Telephone charges on No. of units, and employees head count is with "Each" in SAP.
Apart from Ajay's reply, you can consider the Canteen exp in an organization. Assume Admin, Fin and Mfg departments are getting food services from Canteen. Here, total monthly cost of Canteen exp should be allocated to respective departments. Here, we use SKF as total head count of each department and distribute the cost.
Planned SKF is what you planned on the beginning of a period. (Assume head count was planned as 30 in the month beginning)
Actual SKF is what exactly you consumed over the period. (Actual employees provided canteen services during the month is 25)
BR, Srinivas Salpala

What's the difference between reguler KDE and KDEmod?

Hello all,
In two weeks I get my new laptop, which will be capable of running Arch and KDE ( as my current computer isn't, somehow it only runs Fedora w/ Gnome)
Since I really like Arch and already got it working on Virtualbox, I want to install it on my new laptop. I'd like to get it working with KDE, but I noticed Arch also has KDEmod. I already searched the forums but couldn't really find an answer to my question: What is the difference between regular KDE and KDEmod and which one is better for me to use?
Thanks in advance!

Allan, i forgive you for your poor paragraph construction and sorry for me being a bit peeved
However, i know you have read more from the IRC log than just that one sentence by me...
Allan wrote:
From the IRC log, I do not think that conclusion is too far off, especially if you are considering Arch-Stable as your base... So saying "plain wrong" seems... well... plain wrong. Especially given the irc log:
<funkyou> in one sentence: to do what we really want to do, we need a stable platform.
So why not showing the whole picture and clear this up:
<funkyou> ok, to start: i think at least some of you have noticed that arch linux is a fine platform for what we want to deliver, but there are some little "annoyances"
<funkyou> mainly:
<funkyou> -.so bumps every few weeks
<funkyou> -the general "freshness"
<funkyou> -a lot of manual interaction needed (sometimes)
<funkyou> everyone can see these problems when looking at the forums, _most_ of them are related to updates
<funkyou> in one sentence: to do what we really want to do, we need a stable platform.
Makes more sense now? Its not that Arch is too unstable, its just that we cant keep up will all the changes... And this is not Archs "fault" nor anyone elses fault, its just going too fast for us. Most annoying or severe bugs in our tools are there due to upstream updates. And the reasons are not really the .so bumps (which are mostly solved by a simple rebuild) but also constantly changing apis and stuff. This is not a big problem in KDE (they keep their apis clean), but a big one when it comes to other stuff like parted, to give an example. And this is our main problem, we need to constantly adapt our code to upstream changes.
This even resulted in a repo with modified or "frozen" Arch packages just to keep our liveCD going, and now we are looking for solutions for this problem, and "stable" snapshots seem to be one way... Oh, and if we would do this (there is nothing announced yet), we would do our own snapshot every X months because ArchStable seems to be a dead project. We also considered cooperating with the ArchServer guys, but their stuff is really made for servers, so even while their project is really nice its not really an option for us.
Well, we'll see what we will do during the next months, now we are still testing and evaluating some solutions... Oh, and people, please stop any "we dont need another ubuntu" complaints...

The difference between FIELD-SYMBOL and normal DATA TYPE

Dear experts,
Please see the example below, both are output the same result.
DATA: EXTERNAL_RECORD(4000),
      POSITION TYPE I,
      LENGTH TYPE N,
      ENTRY TYPE STRING.
EXTERNAL_RECORD = '0005Smith0007Edwards0005Young'.
DO.
LENGTH = EXTERNAL_RECORD+POSITION(4).
IF LENGTH = 0.
    EXIT.
ENDIF.
ADD 4 TO POSITION.
MOVE EXTERNAL_RECORD+POSITION(LENGTH) TO ENTRY.
WRITE ENTRY.
ADD LENGTH TO POSITION.
IF POSITION >= 4000.
    EXIT.
ENDIF.
ENDDO.
--OR It can be written as--
DATA: EXTERNAL_RECORD(4000),
      POSITION TYPE I,
      LENGTH TYPE N.
FIELD-SYMBOLS <ENTRY>.
EXTERNAL_RECORD = '0005Smith0007Edwards0005Young'.
DO.
LENGTH = EXTERNAL_RECORD+POSITION(4).
IF LENGTH = 0.
    EXIT.
ENDIF.
ADD 4 TO POSITION.
ASSIGN EXTERNAL_RECORD+POSITION(LENGTH) TO <ENTRY>.
WRITE <ENTRY>.
ADD LENGTH TO POSITION.
IF POSITION >= 4000.
    EXIT.
ENDIF.
ENDDO.
Is there any special circumstances we need to use FIELD-SYMBOL?
Why is FIELD-SYMBOL is introduce in the first place?
Kindly advice with example.
Thanks in advance for those who can help me on this.

HI,
You can use field symbols to make the program more dynamic. In this example the name of a table control is substituted by a field symbol. Thus you cal call the form with any internal table, using the name of the table control as a parameter.
Example
form insert_row
using p_tc_name.
field-symbols <tc> type cxtab_control. "Table control
assign (p_tc_name) to <tc>.
insert 100 lines in table control
<tc>-lines = 100.
Field symbols allow you to:
**     Assign an alias to a data object(for example, a shortened
        name for data objects structured through several hierarchies
        - <fs>-f instead of rec1-rec2-rec3-f)
**     Set the offset and length for a string variably at runtime
**     Set a pointer to a data object that you determine at runtime (dynamic ASSIGN)
**     Adopt or change the type of a field dynamically at runtime
**     Access components of a structure
**     (from Release 4.5A) Point to lines of an internal table
        (process internal tables without a separate work area)
Field symbols in ABAP are similar to pointers in other programming
languages. However, pointers (as used in PASCAL or C) differ from ABAP
field symbols in their reference syntax.
The statement ASSIGN f to <fs> assigns the field f to field
symbol <fs>. The field symbol <fs> then "points" to the
contents of field f at runtime. This means that all changes to the
contents of f are visible in <fs> and vice versa. You declare
the field symbol <fs> using the statement FIELD-SYMBOLS: <fs>.
Reference syntax
Programming languages such as PASCAL and C use a dereferencing symbol
to indicate the difference between a reference and the object to which
it refers; so PASCAL would use p^ for a pointer instead of p, C would
use *p instead of p. ABAP does not have any such dereferencing symbol.
**     In PASCAL or C, if you assign a pointer p1 to a pointer p2,
you force p1 to point to the object to which p2 refers (reference semantics).
**     In ABAP, if you assign a field symbol <fs1> to a field
symbol <fs2>, <fs1> takes the value of the data object to
which <fs2> refers (value semantics).
**     Field symbols in ABAP are always dereferenced, that is,
they always access the referenced data object. If you want to
change the reference yourself in ABAP, you can use the ASSIGN statement
to assign field symbol <fs1> to field symbol <fs2>.
Using field symbols
You declare field symbols using the FIELD-SYMBOLS statement.
They may be declared either with or without a specific type.
At runtime you assign a field to the field symbol using the ASSIGN
statement. All of the operations on the field symbol act on the field
assigned to it.
When you assign a field to an untyped field symbol, the field symbol
adopts the type of the field. If, on the other hand, you want to assign
a field to a typed field symbol, the type of the field and that of the
field symbol must be compatible.
A field symbol can point to any data object and from Release 4.5A,
they can also point to lines of internal tables.
The brackets (<>) are part of the syntax.
Use the expression <fs> IS ASSIGNED to find out whether the field
symbol <fs> is assigned to a field.
The statement UNASSIGN <fs> sets the field symbol <fs> so
that it points to nothing. The logical expression <fs>
IS ASSIGNED is then false. The corresponding negative expression
is IF NOT <fs> IS ASSIGNED.
An unassigned field symbol <fs> behaves as a constant with
type C(1) and initial value SPACE.
MOVE <fs>
TO dest     Transfers the initial value SPACE to the variable dest
MOVE 'A' to <fs>
Not possible, since <fs> is a constant
(runtime error).
To lift a type restriction, use the CASTING addition in the
ASSIGN statement. The data object is then interpreted as though
it had the data type of the field symbol. You can also do this
with untyped field symbols using the CASTING TYPE <type> addition.
The danger with pointers is that they may point to invalid areas.
This danger is not so acute in ABAP, because the language does not
use address arithmetic (for example, in other languages, pointer p
might point to address 1024. After the statement p = p + 10, it would
point to the address 1034). However, the danger does still exist, and
memory protection violations lead to runtime errors.
A pointer in ABAP may not point beyond a segment boundary. ABAP does
not have one large address space, but rather a set of segments.
Each of the following has its own segment:
*     All global data
*     All local data
*     Each table work area (TABLES)
*     Each COMMON PART
You should only let field symbols move within an elementary field or
structure where ABAP allows you to assign both within the global data
and beyond a field boundary.
Rgds
Umakanth

What is the difference between smart forms and scripts.?

what is the difference between smart forms and scripts.?

Differences between Smartforms and SAPscript
a) Multiple page formats are possible in smartforms which is not the case in SAPScripts
b) It is possible to have a smartform without a main window .
c) Routines can be written in smartforms tool.
d) Smartforms generates a function module when activated.
e) Smartforms can create web enable forms like XML
f) smartforms itself contine subroutine pools need not to main separetly like in case of scripts
Request you to refer the following links
www.sap-img.com/smartforms/smartform-sapscripts.htm
www.erpgenie.com/abap/smartforms_sapscript.htm
Sapscript vs Smartforms
Difference with SMARTFORMS vs. SapScript(SE71)
The Following are the differences :-
a) Multiple page formats are possible in smartforms which is not the case in SAPScripts
b) It is possible to have a smartform without a main window .
c) Labels cannot be created in smartforms.
d) Routines can be written in smartforms tool.
e) Smartforms generates a function module when activated
Scripts are client dependent whereas smartforms aren't.
Upto 99 main windows are possible in scripts and only one in smarforms.
To create multiple main windows in scripts, you just have to give the window type as MAIN whnever you create a window.
Scripts still exists but smartforms are in use from 4.6c version, now the lastest version of these two is adobe forms
SAP Smart Forms is introduced in SAP Basis Release 4.6C as the tool for creating and maintaining forms.SAP Smart Forms allow you to execute simple modifications to the form and in the form logic by using simple graphical tools; in 90% of all cases, this won't include any programming effort. Thus, a power user without any programming knowledge can
configure forms with data from an SAP System for the relevant business processes.
Advantages of SAP Smart Forms
SAP Smart Forms have the following advantages:
1. The adaptation of forms is supported to a large extent by graphic tools for layout and logic, so that no programming knowledge is necessary (at least 90% of all adjustments). Therefore, power user forms can also make configurations for your business processes with data from an SAP system. Consultants are only required in special cases.
2. Displaying table structures (dynamic framing of texts)
3. Output of background graphics, for form design in particular the use of templates which were scanned.
4. Colored output of texts
5. User-friendly and integrated Form Painter for the graphical design of forms
6. Graphical Table Painter for drawing tables
7. Reusing Font and paragraph formats in forms (Smart Styles)
8. Data interface in XML format (XML for Smart Forms, in short XSF)
9. Form translation is supported by standard translation tools
10. Flexible reuse of text modules
11. HTML output of forms (Basis release 6.10)
12. Interactive Web forms with input fields, pushbuttons, radio buttons, etc. (Basis-Release 6.10)
Reward Points if useful.

What is the difference between Abstract class and Interface ?

Hi,
Could u plz tell me the difference between Abstract class and Interface?
Thanks in advance.
Gopi

Lots.
An abstract class can contain some method implementations, or indeed all the method implementations. It may contain methods with all the various access modifiers. It cannot be instantiated. A class may inherit from only a single abstract class.
An interface contains only public method stubs and constants. A class may implement multiple interfaces. An interface cannot (obviously) be instantiated.
Abstract classes are particularly useful when you need to provide a semi-complete implementation for reuse. Interfaces are used more like types.
Look at java.util.* for some good examples of the use of both.

(261680070) Q WWO-13 What are the difference between WLS6.1 and WLS7.0 web services?

Q<WWO-13> What are the difference between WLS6.1 and WLS7.0 web services?
A<WWO-13> The differences are huge, so different in fact that 6.1 web services cannot
be deployed in 7.0. WLS7.0 and Workshop have much greater functionality than the
limited stateless session (RPC-style) and JMS destination (MSG-style) approach of
6.1. Workshop web services can interact with any type of EJB, any JMS destination
as well as other web services and directly accessing databases. The framework for
building the web service is better and more adaptable and Workshop provides a fully
integrated develop, deploy, test and debug environment. Additionally, WLS7.0 have
the capacity to be much better at performance since due to XML parser enhancements
and the addition of XML maps.

If you want to take existing WLS6.1 web services and convert them to WLS7.0 you can
do so quite easily. The WLS7.0 Ant still supports wsgen so you do not need to even
change your build.xml file. The generated web service however will be implemented
is a manner compliant with the WLS7.0 environment. More details are at:
http://e-docs.bea.com/wls/docs70/webServices/anttasks.html#1070576
"Adam FitzGerald" <[email protected]> wrote:
>
Q<WWO-13> What are the difference between WLS6.1 and WLS7.0 web services?
A<WWO-13> The differences are huge, so different in fact that 6.1 web services
cannot
be deployed in 7.0. WLS7.0 and Workshop have much greater functionality
than the
limited stateless session (RPC-style) and JMS destination (MSG-style) approach
of
6.1. Workshop web services can interact with any type of EJB, any JMS destination
as well as other web services and directly accessing databases. The framework
for
building the web service is better and more adaptable and Workshop provides
a fully
integrated develop, deploy, test and debug environment. Additionally, WLS7.0
have
the capacity to be much better at performance since due to XML parser enhancements
and the addition of XML maps.

What is the difference between Video-out and mirroring?

What is the difference between Video-out and mirroring? I can't get iPhone 4 video to work on my TV screen
I have just bought an MD098ZM/A (Apple 30-pin Digital AV Adapter). I am struggling to get it to show a picture on my TV. I know I'm doing something right because the audio is coming out of my TV speakers but no picture on the TV screen.
I have used the same HDMI channel (on the TV side) with the same cable and my thunderbolt port (MacBook Air) without any trouble - and on the same app (BBC iPlayer download then full-screen mode).
Now I note that the packaging for the MD098ZM/A says video-out on iPhone 4 but mirroring only on iPhone 4S. I only have an iPhone 4 (not the 4S). Now if the lack of iPhone 4 support for mirroring means that I can't play video material out to my TV, then in what sense is there any video-out capability at all?
There is only safety and warranty paperwork in the Apple adapter packaging - no help information. And I haven't found further guidance online either.
I do note somewhere online that it suggests that basic non-mirroring video-out (for this adapter) only works with some external TV sets. Any way of finding out which? I'm using a Sanyo CE32LD90-B LCD TV if it helps.
So far not doing very well.

Now found these but have had to give up on this adapter!
http://manuals.info.apple.com/en_US/iphone_user_guide.pdf
http://support.apple.com/kb/HT4108

What is the difference between document class and normal class

Hi,
Please let me know what is the difference between document class and normal class.
And I have no idea which class should call as document class or call as an object.
Thanks
-Actionscript Developer

the document class is invoked immediately when your swf opens. the document class must subclass the sprite or movieclip class.
all other classes are invoked explicitly with code and need not subclass any other class.

In OSX Activity Monitor, what's the difference between 'free' memory and 'inactive' memory

In OS X Activity Monitor, what's the difference between 'free' memory and 'inactive' memory. My daughters 2Gb MacBook Pro is very slow, it probably needs more memory but there is almost 1Gb of 'inactive' memory but no 'free' memory when an application is opened.
Thanks

Free RAM is the one that has not been used by any application since you started up your Mac, and inactive RAM is the one that was used by an application and it is not in use anymore.
1 GB of inactive RAM is a lot, and it may be the cause of the slowness. There are a lot of apps that allows you to turn inactive into free RAM. I use FreeMemory, but have a look at the Mac App Store.
If you are a developer, you can do that with a command you can type into Terminal:
sudo purge

What is the difference between local printing and remote printing in SAP

Hello Nation,
I would like to know what is the difference between local printing and remote printing in SAP and in what scenarios they are used ?
1.What is local printing in SAP ?
2.What is Remote Printing in SAP?
3.what is the difference between local printing and remote printing in SAP ?
Thank you in Advance.
Regards,
-Mohamed Naveen.

Hi,
This is SAP Business one system administration forum. Please find correct forum and repost your discussion to get quick response.
Please close this thread here with helpful answer.
Thanks & Regards,
Nagarajan

What's the difference between InDesign CC and InDesign CC 2014?

Hi,
I am in the middle of projects and I see there is a whole new release of the Adobe Cloud apps.
What is the What's the difference between InDesign CC and InDesign CC 2014?
Are there different features?
Different tutorials?
I don't want to suddenly open my files in INDD CC 2014 unless it is fairly seamless.
Thanks for any help and advice.
— CR

http://blogs.adobe.com/jkost/2014/06/installing-the-2014-release-of-creative-cloud.html
-you may need to log OUT of your Cloud account and then log IN again to see the updates
This messages says (at least some) CC 2014 programs use NEW plugins https://forums.adobe.com/thread/1499663
-so do not uninstall the older CC programs if you use plugins in your programs until you are sure you have plugins that work in CC2014
If you are sure you don't need the old CC programs
-http://helpx.adobe.com/creative-cloud/help/install-apps.html to install or uninstall
-read reply #3 about the ORDER of uninstalling & installing
For program specifics, try InDesign
The Cloud forum is not about using individual programs
The Cloud forum is about the Cloud as a delivery & install process
If you will start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

What's the difference between segment filtering and reduced message type

Hi gurus,
What's the difference between segment filtering and reduced message type? It seems they have the same functionality: Reduce the segment while idoc is generated.
Thanks in advance.

Hi,
BD53 is for IDoc Reduction.
this allows you to create a reduced message based upon a standard message type.If you want see mandatory fields. go to T-coe BD53 and give one standard messege type name and eg: matmas
there mandatory fields will be in Green color..
And BD56- This transaction is used to filter out segments of IDocs for combination of sender and receiver. This is usefull in scenarios where a standard IDoc with many segments is used but the receiving partner is only interested in some of the segments
the table related to this transation is TBD20
please go through below blog you have an idea abt that,
http://wiki.sdn.sap.com/wiki/display/ABAP/ReducedMessageTypes
http://saptotal.com/IDoc%20Segment%20Filtering.html
regards,
ganesh.

Need the difference between Adapter Engine and Advanced Adapter Engine

Similar Messages

Maybe you are looking for