Need the installation setup for deskjet 1512

I have several computers. The oldest one-the one in question-has no functioning dvd rom drive. I recently purchased a hp deskjet 1512 all-in-one printer and even though I have the installation cd, can't use it on the old computer. I need the installation set, etc downloaded so that I can put it on a zip drive and then install the printer on the old computer.

Hi,
Download the drivers from the link below, these are identical to the original CD:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=al-117537-4&cc=us&dlc=en&lc=en...
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Similar Messages

  • Need the installer files for Elements 2.0

    Hey,
    Could anyone help me out and point me in the direction where I can download the installer files for Elements 2.0?
    I work at a Computer shop and have a client that wants us to reinstall her Elements 2.0 and I cannot find the installer anywhere on this site.
    I also contacted adobe support and they said they cannot help me and I need to go to the forums to find the installer.
    Any help would be appreciated.
    Thanks everyone!

    Unfortunately, adobe doesn't have installers available publicly for software that old.
    Even if you do find an installer somewhere on the internet for pse 2, it's most likely an 30 day trial version which can not be converted to a licensed version.
    You might try finding a copy on Amazon.
    I guess she can't find her original photoshop elements 2 cd?

  • I need the installation steps for Firefox 4 on Linux after downloading the file firefox-4.0b6.tar.bz2 , somebody help me..

    hi...
    I downloaded firefox-4.0b6.tar.bz2
    then I extracted the files to a directory named "Firefox" .
    so someone please help me. What to do next?
    do i have to relocate this directory to place where firefox is installed.
    kindly tell me the exact steps needed.

    https://support.mozilla.com/en-US/kb/Installing+Firefox+on+Linux

  • How do i setup Mail account on my mac book like in mobile phone? I.e. Don't want to store the mails/attachments on pc, however need the latest emails for given number of days?

    How do i setup Mail account on my mac book like in mobile phone? I.e. Don't want to store the mails/attachments on pc, however need the latest emails for given number of days?
    This helps the storage and purpose of email as well. I could always log into online email account to find history of emails.
    Thanks
    Chai

    How do i setup Mail account on my mac book like in mobile phone? I.e. Don't want to store the mails/attachments on pc, however need the latest emails for given number of days?
    This helps the storage and purpose of email as well. I could always log into online email account to find history of emails.
    Thanks
    Chai

  • I need the installer for 10.6.1.7 64, iTunes can you help?

    Pleas advise?... I need the installer for iTunes64 msi, can anyone out there help?..also is there a disk with Itunes on it for an install?

    Download iTunes Here...
    http://www.apple.com/support/itunes/install/
    dueeast47 wrote:
    is there a disk with Itunes on it for an install?
    Not that I am aware of...

  • Can't run the Installation Software for the LiDe 210, need a signed/verified copy???

    Can't run the Installation Software for the LiDe 210, need a signed/verified copy???

    Hi lanepoor!
    So that the Community can help you better, we will need to know the Computer Operating System you're using (Windows XP/Vista/7/8 or Mac 10.x). Any other details you'd like to give will only help the Community better understand your issue! Thanks and have a great day!

  • LabVIEW cannot locate some components necessary to build the installer - looking for "Setup" installer

    Hi,
    I have an application that has been upgraded to LabVIEW 8.  I have previously been able to build the exe and installer but recently the installer part of the build has been failing with the following error message:
    Unable to locate the installer source for "Setup" distribution.
    Locate the distribution and try again
    The dialog includes a file path prompt that is pointing at the Installer\Volume directory where Installer is the target directory for the build.  The installer build is configured to span CD-sized volumes (650MB)
    There are no sources or support files named anything like Setup that I can see.
    The installer includes DaqMX and the LabVIEW 8 runtime engine as additional installers
    The build works ok If I turn off the DaqMX driver installer
    Cheers,
    Brett Percy
    Senior Software Development Engineer
    Certified LabVIEW Architect and LabVIEW Champion

    Hi Andy,
    I've upgraded DAQmx to 8.0.1 and the installer build now works....sometimes.
    And sometimes it gives me a different error:
    CDK_Build_Invoke.vi.ProxyCaller >> CDK_Build_Invoke.vi >> CDK_Engine_Main.vi >> CDK_Engine_Build.vi >> NI_MDF.lvlib:MDFBuildDist_Build.vi
    Loading product deployment information
    Loading product deployment information
    Loading product deployment information
    Loading product deployment information
    Loading product deployment information
    Adding files to installer
    Done adding files
    Preparing to build deployment
    Copying products from distributions
    Copying distribution 'NI-DAQ 8.0.1' from: C:\Documents and Settings\brettper\Desktop\NIDAQ801\8.0.1\ to: C:\Documents and Settings\brettper\My Documents\Work\Deakin University\433 VuPlate Software Upgrade\builds\VUPlate\VuPlate Installer\
    Copying distribution 'Setup' from: C:\Documents and Settings\brettper\My Documents\Work\Deakin University\433 VuPlate Software Upgrade\builds\VUPlate\VuPlate Installer\Volume\ to: C:\Documents and Settings\brettper\My Documents\Work\Deakin University\433 VuPlate Software Upgrade\builds\VUPlate\VuPlate Installer\
    Building deployment
    Copying setup files
    Setting merged database information
    Setting product information
    Setting developer part information
    Starting final build
    Validating...
    *** Error: An internal tool or library returned an error. (Error code -21)
    Error Messages
    Input directory 'C:\Documents and Settings\brettper\My Documents\Work\Deakin University\433 VuPlate Software Upgrade\builds\VUPlate\VuPlate Installer\Volume\bin\p2' not found for part 'palSetupLVRT.msi' in product 'C:\Program Files\National Instruments\Shared\MDF\Manifests\NI-PAL for Phar Lap ETS {3263845B-95F2-43C0-817E-B7BF25BCB742}.xml'.
    Input directory 'C:\Documents and Settings\brettper\My Documents\Work\Deakin University\433 VuPlate Software Upgrade\builds\VUPlate\VuPlate Installer\Volume\bin\p3' not found for part 'infInstaller.msi' in product 'C:\Program Files\National Instruments\Shared\MDF\Manifests\NI-DAQ INF Files {2146CF1A-5ACD-4A50-8B36-6A7DD095B08C}.xml'.
    -- SNIP --
    Input directory 'C:\Documents and Settings\brettper\My Documents\Work\Deakin University\433 VuPlate Software Upgrade\builds\VUPlate\VuPlate Installer\Volume\bin\p43\nilm' not found for part 'nilm.msi' in product 'C:\Program Files\National Instruments\Shared\MDF\Manifests\NI License Manager {FB6DF036-C3A7-4A89-92DA-B4364A8E9373}.xml'.
    Input directory 'C:\Documents and Settings\brettper\My Documents\Work\Deakin University\433 VuPlate Software Upgrade\builds\VUPlate\VuPlate Installer\Volume\bin\p44\LVRealTimeErrorDialog' not found for part 'LVRealTimeErrorDialog.msi' in product 'C:\Program Files\National Instruments\Shared\MDF\Manifests\NI LabVIEW RT Error Dialog {3DFF45F7-C12C-4A3A-BA9E-1946A4E92424}.xml'.
    Input directory 'C:\Documents and Settings\brettper\My Documents\Work\Deakin University\433 VuPlate Software Upgrade\builds\VUPlate\VuPlate Installer\Volume\bin\p45\LVBrokerAux800' not found for part 'LVBrokerAux80.msi' in product 'C:\Program Files\National Instruments\Shared\MDF\Manifests\Broker Aux 8.0 {88BBB9A9-C034-466E-BB83-8197AFD1669C}.xml'.
    *** End Error Report
    Done building deployment
    And underneath all this (in the Details of the Build Errors dialog) I get
    "Visit the Request Support page at ni.com/ask to learn more about resolving this problem. Use the following information as a reference:"
    followed by nothing...
    So it's sort of working but not entirely reliable.  I think I've seen the path to the DAQmx installer in the Additional Installers tab replaced with the path into the installer build directory I was being prompted with earlier but I haven't been able to replicate this.
    Senior Software Development Engineer
    Certified LabVIEW Architect and LabVIEW Champion
    Attachments:
    Full error listing.txt ‏16 KB

  • Why isn't the installation asking for disk 2

    why isnt the installation asking for disk 2.  I have loaded disk 1 for photo shop 10 elements and the NEXT button takes me to a program maintenance screen where I am told if I proceed with the NEXT button the only indicated action is  Remove Adobe Photoshop Elements 10 from your computer.  The header on the screen is still Adobe Photoshop Elements 10 - Setup.  I have photoshop 9 on my computer.

    It will only request Disc 2 if you have requested to install the Premiere Elements 10 trial.  If you do not wish to install the trial there is no need to insert disc 2.

  • Is the installation file for adobe reader, the same for all the versions of windows ? Is it ?

    Hello,
    I want to know if the installation file for adobe reader is it the same for all the windows ?
    It is because I have to do an automatic installation for XP, seven and windows 8...
    It is also the same between 32bits and 64bits ?
    Thanks.
    Best regards
    Sofia Luna

    It may be worth mentioning two things.
    1. Adobe provide extensive information on Enterprise Deployment of Acrobat and Adobe Reader.
    2. You may well need a redistribution license to do this, if you are installing on behalf of anyone (accepting EULA for them), pushing, or hosting etc.

  • What are the installation steps for Oracle Fusion HCM

    Hi all
    I will like to ask, what are the installation steps for Oracle Fusion HCM as well as can it work on Windows or only on virtual machine?
    Thanks

    If you're looking to install Fusion HCM, your best bet is to install on linux, eg, Oracle Enterprise Linux. It's up to you whether you put that in a Virtual Machine or not. I don't think Windows is an available platform for Fusion Apps at the moment, although am prepared to be corrected if you find anything to the contrary!
    If you're looking to do an install on your own PC/laptop, you're probably out of luck - you'll be needing around 128GB of RAM. Check out this post:
    http://onlineappsdba.com/index.php/2011/11/02/fusion-applications-128-gb-memory-and-500-gb-disk-space-are-you-ready/
    Atul has also posted some good stuff on installing:
    http://onlineappsdba.com/index.php/2011/06/15/install-oracle-fusion-applications-in-10-steps/

  • Error: -1612 The installation source for this product is not available. Ver

    Hi,
    I am trying installing the FA in SAPB12005A SP01 PL36. and I received this error message:
    Error: -1612 The installation source for this product is not available. Verify that the source exists and that you can access it.
    How can I resolved this?
    Regards,
    IAN

    I am getting the exact same error. How come anyone else did not get it?
    The procedure I followed was :
    Downloaded and installed the "download manager" first.
    Then selected all product updates from BOXI3.1 Enterprise
    It downloaded 58 items. After an inquiry I came to know that you need to install only the latest patch, i.e. Patch 1.7 will include all previous patches. So I was running 1.7 and getting this error constantly, and unable to install it at all.
    I tried downloading it from different places and networks, same error persists.

  • How to find programatically the installation location for Mysql?

    How to find programatically the installation location for Mysql?

    There are thousands of them. Probably hundreds of thousands. If you had a particular one in mind, just ask the person who set it up. There's no point in trying to write code for that, since you only need to ask once and put the location in your code.

  • I need an installation file for officejet pro 8000 series a809 printer

    I need an installation file for officejet pro 8000 series a809 printer

    Just search the web and you will find you answer.
    http://www.google.com/search?q=+officejet+pro+8000+series+a809+&sourceid=ie7&rls=com.microsoft:en-us...
    Say thanks by clicking the Kudos Thumbs Up to the right in the post.
    If my post resolved your problem, please mark it as an Accepted Solution ...
    I worked for HP but now I'm retired!

  • I need the Log Report for the Data which i am uploading from SAP R/3.

    Hi All,
    I am BI 7.0 Platform with Support Patch 20.
    I need the Log Report for the Data which i am uploading from SAP R/3.
    I extract the DATA from R/3 into BI 7.0 DSO where I am mapping the GL Accounts with the FS Item.   In the Transformation i have return a routine on the FS Item InfObject . I am checking the Gl code into Z table for the FS Item .
    I capture the FS item from the Z table then update this FS item to Infobject FS item.
    Now i  need to stop the Data upload if i do not find the GL code in the Z table, and generate report for all GL code for which the FS item is not maintained in the Z table.
    Please suggest.
    Regards
    nilesh

    Hi.
    Add a field that you will use to identify if the GL account of the record was found in the Z table or not. Fx, create ZFOUND with length 1 and no text.
    In your routine, when you do the lookup, populate ZFOUND with X when you found a match (sy-subrc = 0) and leave it blank if you don't find a match. Now create a report filtering on ZFOUND = <blank> and output the GL accounts. Those will be the ones not existing in the Z table, but coming in from your transactions.
    Regards
    Jacob

  • I lost the installation disks for CS4 master collection. Where can I download the installation file?

    Hello,
    I lost the installation disks for CS4 master collection polish version. Where can I download the installation file?

    Hi filmowka,
    Welcome to the Community!
    Go to http://prodesigntools.com/download-adobe-cs4-and-cs3-free-trials-here.html and choose Master collection CS4 from the list.
    Follow the Very Important Section else the download will not start.
    Thanks!
    Ankit

Maybe you are looking for

  • Discoverer Plus - Problem with Page Orientation when printing pdf's

    Hi, When printing pdf's in Disco Plus I have a problem: My workbooks are a mixture of landscape and portrait pages. I am printing the entire workbook and then using cutepdf to produce a pdf. If I print to paper I get the correct landscape/portrait se

  • Check for source file

    Hi, My requirement is as below: In source FTP directory, I have to check if source file exists or not. If exists, that file shuld be picked up and created at target side with header, line items and detail record. If the file does not exist, then a fi

  • Surface Pro 3 + Photoshop CS6 + Latest N-trig Driver = TOTAL FAILURE!!!...or is it just me???

    I recently purchased a Surface Pro 3 (i7/256GB) for the main purpose of getting back into drawing.  I wanted to run Photoshop CS6 (I'm not buying into Adobe's CC subscription crap) with N-trig's latest 64bit driver that is supposed to add pen pressur

  • Queries on DATABASE OPEN RESETLOGS and lost Control Files

    Hi I have some queries on RESETLOGS I would be keen to hear some answers on Q1. If I am doing a PITR and I end in ALTER DATABASE OPEN RESETLOGS, what happens about any Archived Redo Log files ( still in situ ) that were from the original source datab

  • Linked pages wont open

    Firefox was working normally until an automatic upgrade today. Now when I click on a link that would normally open a new window, it does not happen. Using windows XP up to date. I have checked and reset firefox as the default but still plays up.