Need the modem chip name of Satellite A200-1AX

Hello..
I am planning to buy Toshiba A200-1AX laptop, and i will run Linux under it, so i want ensure if the modem will work with Linux or not, i need the name of modem chip, is the modem chip SmartLink or what?
Sorry for my bad English.
Thanks.

Hi,
the modem wont work since these modems are like "winmodems" and such modems do not work under linux.
Its important which distribution you want to use since some distros have different driver supports (e.g. ubuntu has more automatic driver installation but when driving gentoo you have to install everything from scratch.) and maybe some communities have a workaround to make the modems working but THATS JUST GUESSING AND NOT A STATEMENT!!
Would be nice to tell us which distro you want to use.
Greetings

Similar Messages

My westel modem (that I rent from my phone provider) quit working with the internet. My airport extreme seems to be working from the dsl (phone) connection through the westel, then through the ethernet cabled to the airport extreme. Do I need the modem?

My westel modem (that I rent from my phone provider) quit working with the internet. My airport extreme seems to be working from the dsl (phone) connection through the westel, then through the ethernet cabled to the airport extreme. Do I need the modem? Is the ethernet route less efficent that going throught the internet connection? If I don't need the westel modem; how do I make the dsl conection to the pone port in the wall? Thanks for help on this!

Ok, so are you saying that your Internet is or isn't working? Does it work if you plug your computer directly into your computer and bypass the router (make sure you power cycle the modem when you do this)? If it is working this way, then a new modem isn't going to solve a problem with your Internet not working. If it is going slow (try running a speedtest) then you need to call your phone company to have them take a look at why your Internet is slow. If it runs fine this way and then slows back down when you go back through your router there is something else going on. Try unplugging both the modem and the router, let the modem fully sign back in and connect to the Internet, after it gets signed in, plug your router in, and then after it boots up fully, try running the speedtest again...See if that helps any? Sometimes it's just an IP conflict that happens when the dynamic IP that is assigned by your Internet Service Provider changes and the change doesn't flow smoothly.

Re: Satellite A200-1AX - black image display and delay

My Satellite A200-1AX is 3 weeks old and its LCD was replaced by Toshiba Center here in Kuwait because of defects.
After placing the new LCD i have notice that whenever I am turning on and shutting the unit off, a delay of black image is being displayed and slowly disapperaing.
Can you please tell me if this is normal in appearance just like what the technician in Toshiba Service Center is telling me?
is there any problem with the installation of the new LCD?
I find this thing as an abnormal display when booting and shutdown state of the unit.
Hope you give sometime answering me and best regards.

Thank you Jack Black for your immediate response. I really do't know what transpire to that problem and maybe you are correct that it has something to do with the replacement. The image i am noticing wherein the Technician in Toshiba Service Center here in Kuwait saying that it is normal which I contradict is similar to this scenario, let say you blew up air in a glass or window, you will notice some fog on it and suddenly the fog will gone away.
That is how i describe the black image being display momentarily and and it is disapperaing very slowly which is not normal to compare with the laptop
i am using now which is also toshiba and to all the computers which i had used.
I am bothered with this and i suspect it might have some other problems after the replacement.
Again thak you and hope you can still help me to sort out this problem.

Satellite A200-1AX: very grainy videos after Win 7 installation

Hello.
I have a toshiba Satellite A200-1ax and it use to have Vista when i got it.
I got rid of the OS and installed XP, thous installing the BIOS update for XP.
I've recently installed Win7 and everything is good. The only problem i have is with video files.
Every thing i watch is very grainy.
I've installed some codecs and the catalyst for Win7 beta and thing's got a bit better. Still pixelized though.
But HD video files don't work at all. It's the same as having a video card that doesn't support HD.
The audio races ahead of the video.
I haven't changed anything with the BIOS.
Could the problem be from there? Should i run the BIOS update for vista?

I use ti have Xp on the laptop and the same videos where great. Now they are grainy.
HD doesn;t work properly.
That's the only problem with this OS...
Use to have vista, but i don;t want to go back to those memories :D
PS - i gave the copy of win7 to a friend, he installed it and the videos are OK with him.

Re: Satellite A200-1AX doesn't boot after BIOS update

Hello all!
I wanted to install XP on a Satellite A200-1AX.
So I tried to update the Bios to the version that supports XP.
When I tried to install it, Vista crashed and now the laptop won't even turn on.
When I keep the power button pressed, the fan wheezes but nothing else happens.
I think the BIOS is gone or corrupted.
What do I do?
Thanks in advance for any help!

> When I keep the power button pressed, the fan wheezes but nothing else happens. I think the BIOS is gone or corrupted. What do I do?
What to say buddy. Looks like something went wrong during the BIOS update procedure Possibly the BIOS was not written correctly and the ROM module must be flashed again using a special procedure and tool.
In such case you can do nothing you have to contact the ASP in your country for a fix!!!
Dont waste a time and ask an authorized service technician for a help.
Good luck and best regards

Need Geforce Go 7300 driver on Satellite A200-10x

Hi
1,5 year ago i buy this Satellite A200-10x notebook with Vista (32bit) and Geforce go 7300. Now i can't find drivers for this graphic card
Why? it's not supported model?
I have lot a problems with display driver:
- sometimes bluescreen
- sometimes black screen
- everytime: there is no possibilities to play of any game.
I'm looking for good driver few months and i can't find it.
can anybody help me, please?
/crocart
(sorry for my bad english)

> {quote:title=Jeffrey wrote:}{quote}
> >I'm wondering why no one from Toshiba and nvidia does not respond. people have this problem from year or longer.
> Maybe because this is a user to user forum and maybe because there are probably no Toshiba/nVidia people ?:|
>
> I wonder about your issues?. I??ve got the A200 with nVidia graphic chip and I never had such issues and I use the Toshiba display driver!
>
> I read and heard that some people installed the drivers from omegadrivers.net site but such drivers are not certified and not supported by Toshiba and therefore you can use it ONLY at YOUR OWN RISK!!!
> I know it because I called my ASP in my country and he said this!
ok. sorry.
think i should chill :)
the fight against this problem is exhaustive.
anyway: thanks for answers but my question is still valid: anyone have working solution for this 'nvlddmkm' problem?
in the meantime, I'll try these drivers...

I need the Design Repository name in my Runtime repository query??????

Hi,
I want to execute a query on Runtime repository user.
I need to know: Design Repository User (own of mapping execution error) , Mapping Name and Error Message.
With this query I have the Mapping Name and Error Message. BUT HOW CAN I OBTAIN THE Design Repository name OF MAPPING EXECUTION ERROR???????????????
SELECT
mr.map_name map_name, err.UPDATED_BY,err.UPDATED_ON, err.RUN_ERROR_MESSAGE, err.TARGET_NAME,RUN_ERROR_ID, err.STEP_ID, err.MAP_RUN_ID,
err.MAP_STEP, err.CURSOR_ROWKEY, err.RUN_ERROR_NUMBER,
err.TARGET_COLUMN,
err.STATEMENT, err.CREATED_ON, err.CREATED_BY
FROM ALL_RT_AUDIT_MAP_RUN_ERRORS err,
all_rt_audit_map_runs mr
WHERE mr.map_run_id = err.map_run_id
Thanks in advance!

Hi
When you run a mapping from the OWB Client with the Deployment Manager frist you have to login into a runtime repository with an access user. So you don't run the mapping with a designer user, you run it with a runtime user through an access user.
You can find the deployment (runtima access) user in the ALL_RT_AUDIT_DEPLOYMENTS.CREATED_by/UPDATED_by fileds.
Ott Karesz
http://www.trendo-kft.hu

Need the right charger for my Satellite C660D-153

Hey,
Sorry to be a bit ignorant but I need a replacement charger for my Satellite C660D-153. Just wondered if there was a right or wrong one to get?
Thanks
Sidler28

Hello,
I would also like to order a new laptop charger. My laptop is a C660D (not sure about the "-153") and I have the serial and model number of the charger at hand. Where I can submit an order? Tried to fill out a support e-mail but it failed to submit twice.
Thanks.

Satellite A200-1AX: How to connect to the HDMI port of TV

Hi,
I own A200-1AX (PSAE6E) laptop, with ATI Mobility Radeon HD 2600. The video card has hardware support of high definition audio and video, but there is NO HDMI connector. I want to know, if there is any way to connect the laptop to the HDMI Input of the TV?
Thanks!

Yes it is very stupid situation but you must understand that every notebook manufacturer offer notebook with different hardware platform and different ports. Because of that it is very important to pick up info about all possibilities how to use the notebook with external devices.
Anyway bye and good luck.

How do I delete the BIOS password on my Satellite A200?

Dear Gentlemen:
I have a Toshiba Satellite laptop A200 - 10N with MODEL NO. PSAE3E - 02D00HGR and mistakenly got a password when you turn on your computer and is lost, the fact is that it is not known whether it was from the BIOS or from the utility that you have in the Windows Vista operating system.
In any case it would have to reset the BIOS form or in some other way to make it as at the beginning and not ask any password.
Thank you.

Hi dude
Bad news the BIOS cannot be deleted or removed if you dont know the old password.
In such case there is only one way to get the notebook password free you have to contact the ASP in your country and the guys could do this job.
Good luck and best regards

I need the function module name

i got the requirement to post data to FBS1 FB01 FBV1 transaction before posting the data to transaction i need to check the data in the iternal table for validity . this can be hadled by function modules or bapi
if any now the name please reply

hi santaliestra.
XBLNR(16) TYPE C,                  " Reference
BLDAT(10) TYPE C,                  " Document date
BUDAT(10) TYPE C,                  " Posting date
BKTXT(25) TYPE C,                  " Short text
BLART(2) TYPE C,                  " Document type
WAERS(5) TYPE C,                  " Currency
BUKRH(4) TYPE C,                  " Company code in Header
    STODT(10) TYPE C,                  " Reversal date
    STGRD(2) TYPE C,                  " Reason
    BUKRS(4) TYPE C,                  " Company code
    GSBER(4) TYPE C,                  " Business area
    HKONT(10) TYPE C,                  " Account number
    KOSTL(10) TYPE C,                  " Cost center
    AUFNR(12) TYPE C,                  " Order number
    PROJK(8) TYPE C,                  " Wbs
    NPLNR(12) TYPE C,                  " Network
    VORNR(4) TYPE C,                  " Network activity
    PRCTR(10) TYPE C,                  " Profit center
    ZUONR(18) TYPE C,                  " Assignment number
    PERNR(8) TYPE C,                  " Personnel number
    VBUND(6) TYPE C,                  " Trading parnter
    WRBTR(13) TYPE C,                  " Amount
    DMBTR(13) TYPE C,                  " Amount
    MWSKZ(2) TYPE C,                  " Tax code
    SGTXT(50) TYPE C,                  " Item text
    MATNR(18) TYPE C,                  " Material
    LZBKZ(3) TYPE C,                  " Bank indicator
    LANDL(3) TYPE C,                  " Supplying country
    WWCNT(3) TYPE C,                  " Ship to country
    WWPRL(2) TYPE C,                  " Product line
    WWPG1(5) TYPE C,                  " Product group
    WERKS(4) TYPE C,                  " Plant
    BZIRK(6) TYPE C,                  " Sales district
    BATR2(3) TYPE C,                  " Bus. Attr 2
    WWPL4(11) TYPE C,                  " Product level 4
    WWPL5(14) TYPE C,                  " Product level 5
    PRODT(18) TYPE C,                  " Product
    KNDNR(10) TYPE C,                  " Customer
    VKORG(4) TYPE C,                  " Sales org.
    VTWEG(2) TYPE C,                  " Distribution channel
    SPART(2) TYPE C,                  " Division
    VKBUR(4) TYPE C,                  " Sales office
    INDUS(4) TYPE C,                  " Industry
    CSGRP(2) TYPE C,                  " Customer group
    MTNR1(18) TYPE C,                  " Material
    VKGRP(3) TYPE C,                  " Sales group
    BATR1(18) TYPE C,                  " Bus. Attr 1
    WWPL3(8) TYPE C,                  " Product level 3
    FKART(4) TYPE C,                  " Billing type
    MGENT(8) TYPE C,                  " Management entity
    WWPL6(18) TYPE C,                  " Product level 6
for these fields i need to check for validity .

Need the current package name

I am using 10g and need to get the package name of the executing package on the run time. I can write/hard_code the value, but need a dynamic variable which stores the package_name during runtime.
Looking for something like __PACKAGE__ variable in Perl.
Thanks.

SQL> create or replace procedure call_proc is
2 begin
3 dbms_output.put_line('Call for Call_Proc');
4 dbms_output.put_line(DBMS_UTILITY.FORMAT_CALL_STACK);
5 end;
6 /
Procedure created.
SQL> declare
2 a varchar2(2000);
3 begin
4 call_proc;
5 a := DBMS_UTILITY.FORMAT_CALL_STACK;
6 dbms_output.put_line(a);
7 end;
8 /
Call for Call_Proc
----- PL/SQL Call Stack -----
object      line object
handle    number
name
332C60EC         4 procedure SYS.CALL_PROC
332A2AD4         4 anonymous
block
----- PL/SQL Call Stack -----
object      line object
handle    number
name
332A2AD4         5 anonymous block
PL/SQL procedure successfully completed.

I need the XP drivers for Toshiba Satellite P205-S6327

they're not on the site anymore, and i really need them, i have no soun webcam or anything

This unit shipped with Vista, so it can be assumed you did a downgrade to XP, thus the no XP drivers listed. You can do an uninstall of the sound device, reboot and allow the New Hardware Wizard to reinstall the driver. Also, try going into Device Manager and locating manuf name and going to their website for XP driver.
For the webcam concern-Device Manager-should be a Chicony component--Select Browse my computer for the driver software.
Select Let me pick from a list of device drivers on my computer.
Select USB Video Device from the list, and click Next. REBOOT.

Need info about bundled soware with Satellite A200-1FJ

Hello all,
is Windows Vista preinstalled?
Do they provide a copy with the laptop?
What about driver disk?
I've just received a recovery disk with my laptop.
Some one bought the laptop for me from kuwait.
Can anyone guide me about the dvd's included with the laptop.
best regards
Murtaza

Hello
I can just confirm what previous user has posted. Recovery DVD delivered with your notebook contains recovery image. Recovery image contains OS, all necessary drivers, tools and utilities. It also contains several different applications like WinDVD (for watching DVD movies) and Norton (make your notebook safe if you want to connect it to the LAN and use Internet).
Every time if something goes wrong you can use delivered recovery media and install OS again. You can do this without any restriction and 1000 times if you want. Very important is that you do not need any registration by Microsoft.
If you have more questions please write again. Good luck!

Problem when trying to install the Catalyst 8.2 on Satellite A200-1KB

Hi,
recently I did have to change back to Windows XP, since I was having problems running some old stuff that I have and I need to run it.
The laptop has an ATI Mobility Radeon HD 2400, and I have installed the Windows XP 32 Professional, so I have downloaded the correct drivers but when im installing them I get an error that say or the driver isnt for my Windows or isnt for my Hardware aka Graphic Card :(
Since I like games I would like to have the lasted driver install on the Laptop so I can play them whitout any problems, but I cant install the last driver for it.
Thanks for your help in advance :D

Hi friend,
Ive read your post and one question about I am curios is: Where did youve downloaded the graphics driver? From the ATI homepage??
If yes, then I can tell you: the drivers from there would NEVER work since you have a special mobile chipset and not a desktop graphics card.
In such case (if you want to have the latest drivers) you will have to visit:
http://www.laptopvideo2go.com
or
http://www.omegadrivers.net/
because there and ONLY THERE you can get some modified drivers which will run on your mobile system. But install them on your own risk!!
GReetings

Need the modem chip name of Satellite A200-1AX

Similar Messages

Maybe you are looking for