Need The name of machines that received the advertisement

I am using SCCM 2007 to push a program. In the advertisement status I can find the number of machines that received the advertisement and ran the program successfully.
I need to know the names of these machines if possible
Thanks

If you are looking at only specific states, you cna use the built-in report for
"All system resources for a specific advertisement in a specific state"
Blog: http://theinfraguys.com
Follow me at Facebook
The Infra Guys Facebook Page
Please remember to click Mark as Answer on the answer if it helps you in anyway

Similar Messages

Hello, I would like to create and print a contact sheet in Photoshop elements 13. I have managed to do that but I need desperately to be able to place a title on the contact sheet. Also, each photograph has as name and I need these names to show up on the

Hello, I would like to create and print a contact sheet in Photoshop elements 13. I have managed to do that but I need desperately to be able to place a title on the contact sheet. Also, each photograph has as name and I need these names to show up on the contact sheet when I print them out. If this is not possible I will just return my product. I have an old old version of Photoshop that will do just that but with this new elements I cannot find it.

markc
What computer operating system is your Premiere Elements 13/13.1 running on?
Assuming Windows 7, 8, or 8.1 64 bit, open the Elements Organizer 13/13.1 and select your media
for the Contact Sheet.
Go to File Menu/Print and set up the Print Dialog for Contact Sheet.
If you used Edit Menu/Add Caption beforehand, I can see how you can get
Date
Caption
Filename
under the Print dialog's "4" and even a page number if you have more than 1 page. But, I am not seeing
where you are going to get a title for each of the contact sheets.
Any questions or need clarification, please do not hesitate to ask.
You can get into the Elements Organizer 13/13.1 from the Welcome Screen or by clicking on the Organizer Tab
at the bottom of the Expert workspace in the Premiere Elements 13/13.1 Editor.
Please let us know if we have targeted your quesiton..
Thank you.
ATR

MacBook Pro i5 with retina will not recognize WD Passport even though I successfully used it to transfer programs and files from my older MacBook ten days ago. It receives power from the USB, but when using Time Machine I receive the message that there is

MacBook Pro i5 with retina will not recognize WD Passport even though I successfully used it to transfer programs and files from my older MacBook ten days ago. It receives power from the USB, but when using Time Machine I receive the message that there is not an external device connected.

If the modem is also a router, either use the modem in bridge and run pppoe client on the TC.. that is assuming ADSL or similar eg vdsl. If it is cable service.. and the modem is a router, then bridge the TC.. go to internet page and select connect by ethernet and below that set connection sharing to bridge.
Please tell us more about the modem if the above gives you issues.

I need an ethernet cable connection to a non-wireless device that isn't near my current airport express. Can I buy an extra one to plug in near the non wireless device to receive the wireless data and put the signal out in ethernet form?

I need an ethernet cable connection to a non-wireless device that isn't near my current airport express. Can I buy an extra one to plug in near the non wireless device to receive the wireless data and put the signal out in ethernet form?

Yes, you can.
This is a special feature of the AirPort Express 802.11n. You will have to set it up "manually" to "enable Ethernet clients".
If your "main" AirPort Express is an 802.11n version, it is also possible to setup the second Express to "extend a wireless network" to provide additional wireless coverage in addtion to enabling the Ethernet port.
If you need the steps, post back to let us know what operating system you are using on the Mac or PC that will be used for the setup of the new AirPort Express.

The search service is not able to connect to the machine that hosts the administration component. Verify that the administration component 'GUID′ in search application 'Search Service Application' is in a good state and try again.

Another post with a well-known title. Believe me, I know. Here's my setup;
- 1 Server 2012 WFE, SharePoint Server 2013, totally up-to-date, including the september 2014 hotfix
- 1 Server 2012 DB, SQL Server 2012
Installed SP 2013 using PowerShell, with the AutoSPinstaller. Worked like a charm. Got everything up and running, with some tweaking here and there to customize it to fit my situation. Now, I can't get the Search Service Application to work. Must have created,
deleted and recreated it at least 30 times. Used both PowerShell scripts, PowerShell line-by-line, Central Admin, heck, I even went so far as to use the configuration wizzard... No luck. I keep on getting the message that search cannot connect to the machine
that hosts the 'administration component'.
In order to avoid answers that suggest all the things I've already tried, here's a summary of the various scenarios I followed:
Tried both a dedicated application pool as well as the SharePoint Web Services Default
Timer job job-application-server-admin-service is running and not showing errors
IIS 8.0 is installed, so is .NET 4.5 (not the known perp of IIS 7.5 and .NET 4.0)
the get-SPEnterpriseSearchServiceInstance -local returns a healthy, online state
the SPEnterpriseSearchQueryAndSiteSettingsServiceInstance is also running
FireWall is disabled; registry has the BackConnectionHostNames modified with the necessary FQDNs
Accounts used to install and / or run the serviceapp all have sufficient rights - tried a dedicated managed account, SP_2013_SearchSvc, the SP admin account, and even the original Farm account; all to no avail, I keep on getting the error message.
Even tried stsadm to start the server search running - NOTHING WORKS!!!
As you might understand, this is driving me nuts. About to miss my second deadline, and no amount of IISresetting is making this go away. Been stuck on this issue for far too long, now (my searching is measured in days and weeks instead of hours, by now).
Whoever helps me solve this - you will have my eternal gratitude, and a nice bottle of Prosecco. Or whatever's your poison. You need to come get it, though. I´m situated in the Netherlands. Hey, you always meant to visit Amsterdam and see for yourself, right?
Thanks, community, for coming to my rescue!

Thanks again - Alas, I've been there. Deleted Search a dozen times, at least, and tried installing it, initially using a PowerShell script (tried several scripts actually, from full-blown total Search Applications with extensive topologies to the most basic
of basics 'please just start without showing me errors'), PowerShell line-by-line to see where things went South, next tried installing through Central Admin (hoping that it was my own stupidity in overlooking things and hoping The System would get it right
for me), and eventually even tried using the config wizzard as a total and utter last resort - Nothing worked.
At first, I found out that removing a Service App needs a *little* bit more work than simply removing it through Central Admin, but by now I can truthfully state that if there's one thing I've become supergood at, it's removing Search Service Applications.Totally.
I will check out the article, though - I realized early on in my SharePoint experience that regardless of what you think you know, there's so much more to find out. I know, that's almost philosophical. That is, my friends, indeed the point I've reached...

F.27 List of customers that received the statement

Hello Guys,
I ran F.27 and as a results more than 1000 statements were sent.
I´d like to know if is there a way to know the name/number of all customers that received the statement.
Is it possible to get a list of all names?
Thanks
Rafael

Hi,
How where the statesments sent? If you send the statements via email in the log you have the list of email adress. And you have the output in tcodes SOST and SOSB.
Regards,
Eduardo

Every time I try to back up my Macbook Pro with an external hard drive using Time Machine, I receive the error of "the disk does not have enough space". I have a 500GB hard drive and only 120GB Macbook. It worked fine before the latest Maverick's

Every time I try to back up my Macbook Pro with an external hard drive using Time Machine, I receive the error of "the disk does not have enough space". I have a 500GB external hard drive and only 120GB Macbook. It worked fine before the latest Maverick's update. Any help would be greatly appreciated.

My guess would be it has created an entirely new backup of your drive when you upgraded to Mavericks.
See Here: http://pondini.org/TM/1.html
And here: http://pondini.org/TM/9.html
Peruse the whole site. There is a lot of information there.

The search service is not able to connect to the machine that hosts the administration component

Hi
After uninstalling the binaries, and reinstalling / joining back to the farm, everything seems happy expect search.
When we try and start the Search Service back, it takes us to the Search Application section, and shows this message;
The search service is not able to connect to the machine that hosts the administration component
How can I get search to work again, or get around this error?
I am pretty inexperienced with Search

Hi Tibsy80,
For your issue, it can be caused by the search admin timer job was disabled.
Run below PS command to know the status:
Get-SPTimerJob job-application-server-admin-service | fl
If it returns “IsDisabled: True”, ran below PS command to enable the service:
Enable-SPTimerJob job-application-server-admin-service
Then run below PS command to stop and start the timer and IIS reset:
Net Stop timer
Net start timer
iisreset
Then wait 1-2 min and try browsing to the SSA again.
Reference:
http://neelb.wordpress.com/2012/01/19/the-search-service-is-not-able-to-connect-to-the-machine/
Also you can refer to the blogs:
http://social.technet.microsoft.com/Forums/sharepoint/en-US/b04498ec-78d1-4bb9-8077-0481977cef10/the-search-service-is-not-able-to-connect-to-the-machine-that-hosts-the-administration-component?forum=sharepointadminprevious
http://davidbajak.com/blog/post/2011/09/29/Fix-SharePoint-2010-Enterprise-Search-After-Using-AutoSPInstaller-Script-Installer.aspx
Best Regards,
Eric
Eric Tao
TechNet Community Support

HT1338 Even though I have the Pages 5.0.1 installed as the default software, I still receive the message "You need a newer version of pages to open this document." HELP!

Even though I have the Pages 5.0.1 installed as the default software, I still receive the message “You need a newer version of pages to open this document.” HELP!

Please clarify....
Mac OS X (10.4.6)
What your system profile shows yet, you posted in the ML forums.

Can you share photos between machines that use the same wifi network? Thanks for your help.

Can you share photos on i-photo between machines that use the same network or even between different accounts on the same machine? I know you can share music on i-tunes but can you do the same on i-photo? Thanks for your help.

Yes.
If you want the other user to be able to see the pics, but not add to, change or alter your library, then enable Sharing in your iPhoto (Preferences -> Sharing), leave iPhoto running and use Fast User Switching to open the other account. In that account, enable 'Look For Shared Libraries'. Your Library will appear in the other source pane.
Any user can drag a pic from the Shared Library to their own in the iPhoto Window.
Remember iPhoto must be running in both accounts for this to work.
You can figure out using it with another machine from that too

HT2513 How do you change the name of a reminder in the reminder list. I right click and then choose "get information" I can change the colour of the reminder but when I type in the name that I want and then press enter the name stays as "untitled".

How do you change the name of a reminder in the reminder list. I right click and then choose "get information" I can change the colour of the reminder but when I type in the name that I want and then press enter the name stays as "untitled"

Jerry,
Thanks for replying again. I've got a little bit further thanks to you. I tried the US keyboard layout as you seemed pretty definte that it should work. This time I applied the setting and also started the language toolbar and selected it from there.
Hey presto, I've got the @ where it should be. Excellent.
However the single quote ' works in a weird way. When I press it, it doesn't show up on the screen. But when I press another key, I get the single quote plus the next key I press. When I press the single quote twice, I get 2 of them. This is also the same with the SHIFT ' key. i.e. for the double quotes.
Very strange. I'll look at other keyboards and see where that gets me.
Thanks, Maz

During the latest iTunes download I received the following error: Service '(Apple Mobile Device) failed to start. Verify that you have sufficient privileges to start system services.

During the latest iTunes download I received the following error: Service '(Apple Mobile Device) failed to start. Verify that you have sufficient privileges to start system services.

Please Note I am the system Administrator

I'm going to get the I Mac and since the new I Mac doesn't have DVD drive on it I was thinking to get the Samsung SE-506AB Slim Portable Blu-ray Writer in order to burn movies from I movie do I need a special software for that since the SE-506ab comes onl

I’m going to get the I Mac and since the new I Mac doesn’t have DVD drive on it I was thinking to get the Samsung SE-506AB Slim Portable Blu-ray Writer in order to burn movies from I movie do I need a special software for that since the SE-506ab comes only with windows software.. but I did check and it is compatible with apple. Can you please advise me and or let me know if I’m buying the right stuff or if there is any other blu ray that will work with the I mac as plug and play.
Thank you
Haim

This freezing reminds me of really old Macs, long ago, in the days of the old-school peripherals like SCSI drives, terminators, scanners and the like. If you had a SCSI conflict, like the wrong device ID's or something, you'd freeze up like that. Back in those days you'd call 800-SOS-APPLE (AAPL?) and they'd run you through disconnecting all your extra hardware - Jaz and Zip drives, CD burners, scanners etc and then eliminate them one by one by adding them incrementally and testing for the freeze/bomb dialog.
But, today we have Firewire and none of those ancient issues (no free lifetime tech support either). My iMac's ports are all full, and I only know which devices are connected when I have to remove something for another device. iSight, scanner, card reader, external hard drive, USB soundsticks, etc. You wouldn't happen to have any SCSI devices hooked up, would you?
Out of curiosity, have you tried a different USB/Firewire port for the hard drive? Or run the hardware test DVD that comes with your computer? This weird freezing seems to suggest a problem with the computer, RAM or network more than a device. Bad devices, in my experience, cause kernel panics, not freezing.

When I try to convert my .pdf to Word, I get a sidebar that has fields for: the name of my pdf file, the type of file I want to convert to (In my case, Word), and a button that says "Convert". My problem is that the "convert to" field isn't active. I ca

When I try to convert my .pdf to Word, I get a sidebar that has fields for: the name of my pdf file, the type of file I want to convert to (In my case, Word), and a button that says "Convert". My problem is that the "convert to" field isn't active. I can see the words "Microsoft Word" in pale gray, but when I click on the field, nothing happens.

You have posted in the wrong forum. Try posting in the forum for the product you are trying to use.
Here is a link to a page that has links to all Adobe forums... use the drop down list to see all.
Forum links page:
https://forums.adobe.com/welcome

Ok i have been trying to download albums, songs, apps, etc. and my itunes keeps asking me for the security question and for the life of me i cant remember the answers. I dont know what the email is that receives the question reset.

ok i have been trying to download albums, songs, apps, etc. and my itunes keeps asking me for the security question and for the life of me i cant remember the answers. I dont know what the email is that receives the question reset. is there anything i can do to fix this or am i screwed?

If you have music that was purchased on different iTunes accounts than the one you use, then you must provide the password, otherwise the tunes are not considered yours. You can turn off iCloud and just use the usual USB sync method. But I wonder whether you'll have the same problem?

Need The name of machines that received the advertisement

Similar Messages

Maybe you are looking for