Need the ribbon cable to connect my front panel to c

I have the SB X-Fi Fatalty. I have misplaced the cable and now I need one as I want to run the front panel.
Where can I get one?
Thanks.
Chris.

I called and got mine in about?5 days I should add.

Similar Messages

  • Equium P200-1ED - Need new ribbon cable

    Hello, hopefully someone can help.
    I have recently inherited this old laptop from my parents and hope to make it useable for my daughter, however there is a problem with the screen in that the picture has a strange red hue to it. I am guessing that the ribbon cable to the screen is somehow damaged.
    I have searched for a new cable on ebay etc and although there are plenty of replacement parts for Toshiba laptops in general, I cannot find any specific for this model.
    I'd rather try and sort this myself, I would imagine that the cost of taking the laptop to a specialist would be more than the laptop is worth, but it would be a shame to have to bin it for the sake of a bit of ribbon cable.
    Thanks in advance.
    Dave.

    Hello
    Before you replace or search for spare parts I would recommend connecting an external monitor. So you can check if the problem is related to LCD, LCD cable or mainboard itself.
    If an external monitor works properly its the LCD or LCD cable itself Otherwise its graphic card/mainboard malfunction.
    Generally speaking all Toshiba spare parts can be ordered from an authorized service provider:
    http://eu.computers.toshiba-europe.com > Support & Downloads > Find an authorized service provider
    So just contact nearest one and tell the technicians what you want. They will order it. ;)

  • Macbook Pro 2011 DVI HDMI out does not work with TV when the power cable is connected

    My Macbook Pro (Early 2011) DVI HDMI out does not work with TV when the power cable is connected. If get the blue screen and then can use the macbook but nothing is displayed on the TV. If i go into display I can see that there are two screens but nothing displayed on the TV. If i take the power cable out at this point the TV shows the second desktop as expected. If i then reconnect the cable, the screen flickers, as though it is being affected by the power cable, and the screen goes blank on the TV. Only if i remove the DVI cable do i get the blue screen again. If i remove the power cable and reconnect it will do it every single time, so i cannot see it being a TV issue or a minor glitch.
    I have had this working previously but at the minute it seems to not be playing ball....any thoughts
    Thanks
    Dan

    BUMP
    Any ideas?

  • HT2646 Does the HDMI cable get connected to the TV or HD receiver if you have a Bose surround system

    In setting up apple tv does the HDMI cable get connected to the HD reliever instead of in back of the tv when u have a Bose system?

    Your best bet is to connect the AppleTV's HDMI to the Bose and the Bose HDMI to the TV. You could connect the AppleTV's HDMI to the TV and the AppleTV's optical to the Bose but optical (S/PDIF, specifically) does not have as much bandwidth as HDMI so you'd potentially have lower quality sound (from what I've read...I'm not an expert on audio).

  • HT4759 Suggestions on how to find lost/stolen iPad? Find my iPhone app needs the iPad to be connected to internet

    Suggestions on how to find lost/stolen iPad? Find my iPhone app needs the iPad to be connected to internet

    ZeinaSalem wrote:
    Suggestions on how to find lost/stolen iPad?
    What to do if your iOS device is lost or stolen >  http://support.apple.com/kb/HT5668

  • Where does the ribbon cable attach on the board on hp vs 17x and how

    How does the ribbon cable attach to the circuit board and how

    Hi,
    The best you can get:
       http://h10025.www1.hp.com/ewfrf/wc/manualCategory?cc=us&dlc=en&lc=en&product=1151511&
    Nowadays people won't repair monitors, buying a new one is much cheaper in the long run.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • K8NGM2-FID - connecting of front panel audio (AC'97)

    Hello,
    I have a K8NGM2-FID based pc running XP Prof. I have a Chieftec LCX-01B-B-SL case with front panel audio. This panel is compatible with AC'97 standard. PIN Assigment of the internal Frontpanel connectors for Audio is below described:
    I red in manual of my mobo:
    "The JAUD1 front panel audio connector allows you to connect to the front panel audio and is compliant with Intel® Front Panel I/O Connectivity Design Guide."
    I red Front Panel I/O Connectivity Design Guide (downloaded from intel site) and:
    "2.3.3 Audio Design Considerations
    Front panel audio design in conjunction with motherboard audio header design is dependant upon the type of audio CODEC being used on the motherboard. In the past, AC97 Integrated Audio CODECs were prevalent. With the introduction of Intel High Definition Audio, many new motherboard designs are switching over to High Definition (HD) audio CODECs. Designersshould note that AC’97 and Intel High Definition Audio front panel motherboards and I/O cardsimplementations are different and may not be directly compatible or interchangeable
    CAUTION
    It is strongly recommended that motherboard designers only use Intel® HD Audio analog front panel dongles with the Intel® HD Audio analog front panel header to insure that the jack detection and dynamic re-tasking capability is preserved. Passive AC’97 analog front panel dongles (ones which leave the 5V Analog pin-7 line unconnected on the dongle) may be used with the Intel® HD Audio analog front panel header. But note that the front panel jack detection and re-tasking functionality will be lost as the AC’97 jacks cannot support connection to the SENSE line. In addition, software must be aware that an AC’97 dongle is being used with an Intel® HD Audio analog header since the software might need to dedicate codec ports that are connected to the header to meet the product’s intended functionality.
    2.3.4.4 AC’97 Header Pin Jumpers
    The rear panel audio output jacks are disabled when headphones are plugged in. If the front panel interface board is not connected to the front panel audio header, jumpers should be installed across header pin pairs 1-2, 3-4, 5-6, and 9-10. If these jumpers are not installed, the rear panel line out connector will be inoperative and microphone input pins 1 and 3 will be left floating, which could lead to elevated back panel microphone noise and cross talk.
    NOTE
    Motherboards that have the foot print for a front panel header, but depopulate the front panel audio header must have 0 ohm resistors as options to connect the FP_OUT and FP_RETURN signals. These resistors must be installed when the header is depopulated to insure audio is routed
    to the back panel."
    Can I connect this front panel audio to front Panel Audio Connector (JAUD1) of K8NGM2-FID (Realtek High Definition Audio)? Will it be work correctly?

    No I don't think it will, I had the same problem with my Coolermaster Centurion case, the pin out configs are different. I just left it disconnected, and didn't worry about it

  • When the screen saver turns off my front panel does not refresh.

    when the screen saver turns off my front panel does not refresh. If I use the show desktop button sometimes I can not maximize my vi by just clicking on it from the start bar.

    I utilize both a screen saver and the show desktop feature but have never seen this problem in the past. You might play around with your screen saver settings to see if they have any affect. You might also try another computer just to make sure something larger scale isn't going on. Also, testing with other programs to make sure it isn't a general OS issue is always a good idea. Other possibilities include changing your Video Driver settings, updating your video driver, and uninstalling - reinstalling.

  • How can i hide( close or exit) the windows media player window from front panel after a video is played.

    I want a video to be played when i star executing a vi. After that i want to remove(hide or close) the media player window from my front panel.how can i do this?
    the vi is attached.
    Electronics and Instrumentation Engineer
    Freelance LabVIEW and Arduino programmer.
    For projects contact me ; [email protected]
    Solved!
    Go to Solution.
    Attachments:
    videovi.vi ‏9 KB

    Check out the attached code.
    If it solves your problem then dont forget to mark this as a solution. Also if you like the answer dont forget to give me kudos
    Tushar Jambhekar
    [email protected]
    Jambhekar Automation Solutions
    LabVIEW Consultancy, LabVIEW Training
    Rent a LabVIEW Developer, My Blog
    Attachments:
    Main.vi ‏14 KB
    MediaPopup.vi ‏21 KB

  • What are all the necessary cables to connect a Cinemin Swivel to a Mac Book Pro 2009?

    Hi,
    I have a bought a mini DVI Cable and a RCA Composite and S-Video Cable. Other than these two cables, I need another one that goes from the RCA Composite and S-Video Cable to the Cinemin. I have a RCA cable with two male endings (balck and red) that I connected to the RCA Composite to the Cinemin but it didn´t work. I don´t know if this happened because the female connection on the RCA Composite and S-Video Cable to the Cinemin is yellow.
    I would like to know what it will be the specific cable that will work between the last cable I have (RCA Composite and S-Video) and the Cinemin. Because I am also confused by the S-video output.
    Any help about this, will be mostly aprpeciated.
    Thanks

    Also, I would point out, would these work with my computer?
    #1: http://www.amazon.com/Samsung-Electronics-EVO-Series-2-5-Inch-MZ-7TE250BW/dp/B00 E3W1726/ref=zg_bs_1292116011_1
    #2: http://www.amazon.com/WD-Blue-Desktop-Hard-Drive/dp/B0088PUEPK/ref=sr_1_1?ie=UTF 8&qid=1393290339&sr=8-1&keywords=easter+egg+xD
    #3: http://www.amazon.com/WD-Red-NAS-Hard-Drive/dp/B008JJLW4M/ref=zg_bs_1254762011_3
    #4: http://www.amazon.com/Seagate-Solid-Hybrid-2-5-Inch-ST1000LM014/dp/B00B99JUBQ/re f=sr_1_8?ie=UTF8&qid=1393290731&sr=8-8&keywords=solid+state+drive
    #5: http://www.amazon.com/dp/B005PWVEJ4/ref=twister_B008B5B97E
    And does all works with the external enclosure BobRz provided, to transfer my old data to new Hard drive?
    http://www.amazon.com/Sabrent-2-5-Inch-Aluminum-Enclosure-EC-TB4P/dp/B005EIGUD4/ ref=sr_1_3?ie=UTF8&qid=1393235049&sr=8-3&keywords=2.5+enclosure
    if not, what can?

  • Do I need the ethernet cable anymore?

    I recently discovered that my DSL modem and Internet plan supports WI-FI, so I can access the Internet throughout the house. When I bring my iMac to another room, it can, of course, access the Web wirelessly.
    When I bring the iMac back to the original room, I re-plug the ethernet cable back in, but the question arises as to whether I even need it anymore.
    Is this necessary? Are there still advantages to having the Mac plugged in directly to the Internet or can I safely eliminate an extra piece of cable clutter by removing this cord?

    I for one, keep my iMac plugged into the ethernet.  I am not lugging that thing all over the house just to get free wifi.
    When I first got my iMac I used wifi for about a month until I noticed all of my connected "devices" started getting funky.  After plugging my iMac to the ethernet all my "devices" were happy campers. 

  • I was trying to put my password but it is not working. My Ipod touch is showing "Ipod is disabled, connect to Itunes". But I tried to connect but the Itunes tells me that I need the password first to connect.I do not know the password. what should I do?

    I put the password in my Ipod and now I am trying to put it again but it is not working....I tried to connect with the Itunes and it is not working because to the Itunes work with my Ipod, I need the password first, which I do not know. In my Ipod is showing "Ipod is disable, connect to Itunes". I was trying to connect but I can't...what should I do ?

    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                          
    If recovery mode does not work try DFU mode.                         
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings         
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: How to back up
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • New iMac and Logitech-z5500... need the right cable.

    so I read on some forums that you need a optical cable and a mini plug adapter.
    is this the right cable?
    http://www.clickok.se/PartDetail.aspx?q=p:919456;c:36142
    I want all of the speakers to work when I watch movies which supports 5.1 audio.

    Yes, that should work fine.

  • Just got a new ipad2 , the usb cable  to connect wont fit into the charger port` it looks a bit smaller than the ipad1?

    just got a new ipad2, the charger cable ( the same cable as ipad1 ) doesnt seem to fit ? i have loads of apple products and the charger is the same on them all ,so whats different? the charge port under the home button looks slightly differant?

    I got the same issue with my iPad 2, when I got it on opening day. For some reason, it just didn't accommodate any of my other cords (ipod touch, ipod nano, etc.). Now, though, every one of my cables except for the ipod nano one can fit in it.  I think that the iPad needs time to "stretch out" its parts to fit the other cables.

  • Audigy SE: Possibility to connect with front panel audio in/

    I have a case which has an audio in and out jack on the frontcase. Is it possible to connect these with an connector on the Audigy SE?

    Quote from: msiAMD6400 on 25-December-07, 21:57:43
    My "disable front panel detection" is unchecked.
    It is not clear to me if you were able to check (enable) the box. The setting you need is "disable front panel detection" checked; that means the motherboard delivers the output to front panel, irrespective of there is a headphone connected or not.
    If you are unable to check that box, i am not sure where is the problem. If you can, i expect you see a pop up window asking you what you have connected to the front panel, by default it should be an audio output option like headphone. Make sure, as I mentioned already, that you can see inside the audio software window the status of all the audio input/output sockets in different colours. The 2 icons representing the frontpanel should be highlighted and you should be able to designate what output/input you want from each of them. If this doesn't happen there is no point in connecting the audio out cable to the header (unless you have the appropriate MSI frontpanel cable which provides jack detection)
    If you have successfully disabled the detection, you just need 3 wires to get output (things work when they are simple). Forget about the looping; you don't need them if jack detection is disabled.
    I suggest you connect the 3 wires to the pins as shown in the manual.
    Note the pin configuration diagram for the "JAUD1" header. I think the common/ground wire from your headphone socket should be  to pin 2, Right out to pin 5 and left out to pin 9.
    Let us know of your results.
    Siby

Maybe you are looking for