Need the SCSI-II 100-pin connector for the PXI-6624

Hi. I need to build a custom cable for the NI PXI-6624 and I would like to know where can I get the 100-pin connectors. Thank you.
Daniel
Chile

You should be able to find the connectors here:
Subminiature and Microminiature D Connectors .050 Series Cable Connectors (SCSI)AMP (749111-8)
The parts are made by Tyco Electronics P/N: 749111-8
Otis
Training and Certification
Product Support Engineer
National Instruments

Similar Messages

  • Developing Third Party Connectors for the Universal Worklist

    Hi,
    We need to develop a third party connector for the Universal worklist.
    In order to retrieve the workflow items we want to use a web service that will be developed according our needs.
    The documentation that I found regarding the UWL states that in terms of connectivity we can use Web based protocols such as HTTP and Web Services, but i couldn't find any example for this, besides the SONIC.
    Has someone already developed a third party connector? Examples?
    Thanks in advance.
    Best regards,
    José

    Hi,
    Have a look at these PDFs...
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/405729e9-314f-2a10-eab6-fcebe6fe8cba
    http://help.sap.com/javadocs/nwce/current/uw/UWL%20Custom%20Connector%20API.pdf
    Regards,
    Srinivas.

  • 100-pin Connector Required when Building Custom Cable for PCI-6031E

    Four 100-pin connectors are required to make custom cables to connect the PCI-6031E. Where can I get this connector?

    Hi Tom,
    Thanks for your reply.  The ringing (noise if you like, but it is definetly being coupled to the output signal from the source) is occuring during both the logic low and logic high periods of the output.  I agree, this is still within the TTL noise margins, but is staying within the margins the only important thing? - e.g. what happens multiple devices are clocked using the same output pulse - the pulse shape is degraded slightly due to cabling and input capacitance etc, and now, because of the additional ringing, the logic thresholds are being crossed when they shouldn't be.  If you consider that the source signal is 5Vpp and the induced ringing is 0.4Vpp then the rejection ratio would be 20*log10(0.4/5) = -22dB, not very good.  The situation is not as bad when one of the internal timebases is used as the source but this particular application requires an external one.  So, I'm looking for ways to reduce the ringing if you're aware of any.  One possibility might be to reduce the cable length - I'm using the 2m cable so maybe you could try the 1m cable for me and see if things improve.
    Jeff

  • Dimensions of the 160-Pin Cable for the NI PXI-2530B

    Hello,
    My mechanical design team wants to know the measurements of the 160-Pin Cable for the NI PXI-2530B. It will be a while before we receive the cable we ordered. I could not find a data sheet with the measurement details; are they? Alternatively, is Figure 1 in the Installation Instructions drawn to scale?: http://www.ni.com/pdf/manuals/375656b.pdf
    Thanks!
    Solved!
    Go to Solution.

    JKSH wrote:
    Hello,
    My mechanical design team wants to know the measurements of the 160-Pin Cable for the NI PXI-2530B. It will be a while before we receive the cable we ordered. I could not find a data sheet with the measurement details; are they? Alternatively, is Figure 1 in the Installation Instructions drawn to scale?: http://www.ni.com/pdf/manuals/375656b.pdf
    Thanks!
    What dimensions are you looking for?
    I'm a little surprised that the length of the cables is not included in the datasheets (I did just look!) - I thought that when I ordered cables for the older-style PXI-2530 modules in my lab that the length was specified in the part description.
    If you need the dimensions of the connectors, you can do a little reverse-engineering and identify the dimensions of the various components. The connector to the module is an LFH-160. The Digikey P/N for the body of a connector is WM4099-ND. It may be difficult to find the dimensions of the backshells, however.  The 4 terminal block connectors are standard 50-pin D-Subs. There are many examples out whose dimensions you can review.
    Jeff
    Jeffrey Zola

  • MOVED: 3-pin connector for fan

    This topic has been moved to Overclockers and Modding Corner.
    3-pin connector for fan

    Generally, the 3 pin connector on VGA cards is smaller than the CPU fan connector on a motherboard. You would need a converter or you may aslo need to mod the connector on the Zalman.
    You could check to see if the actual contacts between the two are the same, in some cases I have been able to use a dental pik to remove the contact pins from the female connector of the original fan's connector and install it into the larger size connector but it's been so long since I have done it. In some cases I have been able to find the little metal contacts at an electronics store and crimp them on myself.
    Since this is not an MSI product and this is an MSI forum, I have moved this topic from the VGA forum to here.
    Good luck.

  • HT203128 iTunes 12.1.050 - Rollback: Updated from 12.01, now I cant't change track numbers and add additional data fields. How can I roll back to the previous version? @Apple, I want a $100 gift card for the inconvenience.

    iTunes 12.1.050 - Rollback: Updated from 12.01, now I cant't change track numbers and add additional data fields. How can I roll back to the previous version? @Apple, I want a $100 gift card for the inconvenience.
    - it's all said in the title. I can't understand why the developers turn things bad ... risking loosing Apples valuable customers.
    More examples needed? (check out the communities and the reviews)
    - OSX: Maverick to Yosemite = not recommended (check it out > http://roaringapps.com/apps)
    - iPad: older versions as iPad2 should not upgrade to iOS7/8 (it's not supporting its hardware accordingly, it's designed for the latest hardware)
    - iTunes (it's possible to rollback to 10.7 - 11.4, but you need to breech OSX system security framework)
    - Pages (was a real alternative for many of us, each update reduced features and created incompatibility to older work files)
    The list could easily extend to ...

    You can offer Apple feedback here: http://www.apple.com/feedback/
    as for "
      "@Apple, I want a $100 gift card for the inconvenience"
    dream on.

  • Can someone explain the functionality of the 50-pin connector inside the SCXI-1600 board

    Hello,
    please explain the functionality of the 50-pin connector inside the SCXI-1600 board.
    I would like to have the pinouts (explanation) of this particular connector
    kind regards
    the lab mouse

    Hi,
    Using the SCXI-1600 for anything other than controlling a SCXI chassis is NOT supported by NI!
    The SCXI-1600 is based on a 16-bit MIO board. There is some additional functionality that is not used while controlling the SCXI chassis. The SCXI-1600 has 8 analog input channels, 8 DIO channels, and 2 counters; there is no analog output support on this board. There is a 50-pin connector inside the SCXI-1600 that can be used to access all of these channels.
    Through Daqmx and Internal I/O filtering you can access these channels trough software. There is no pin-layout available because we do not support this.
    Regards.
    JV
    NI Belgium

  • Adobe Captivate has encountered a problem and needs to close.  We are sorry for the inconvenience.

    I am trying to use Adobe Captivate 5 and I am receiving this message when trying to open the application,
    "Adobe® Captivate® has encountered a problem and needs to close. We are sorry for the inconvenience."
    Can you explain how this issue can be resolve!?

    Hi there,
    On which operating system are you using Adobe Captivate?
    Please recreate the preferences of Captivate, following is the location of Captivate Preferences:
    Windows 7: C:\Users\[user name]\AppData (hidden folder)\Local\Adobe\Adobe Captivate 5 folder
               Windows XP:  C:\Documents and Settings\[user name]\Local Settings\Application Data\Adobe\Adobe Captivate 5 folder
               Mac:  /Users/[user name]/Library/Preferences/Adobe Captivate 5 folder
    rename Captivate 5 to Captivate 5_old
    and then try to launch Captivate 5
    Thanks.

  • Adobe Photo Downloader has encountered a problem and needs to close. We are sorry for the inconvenience.  Error Code: c0000005  Address: 76f73ac3     I clicked on the OK button and the downloader closed.     I then tried to download from the organizer. I

    Photoshop Elements 12
    Adobe Photo Downloader has encountered a problem and needs to close. We are sorry for the inconvenience.
    Error Code: c0000005
    Address: 75e32f71
    I clicked on the OK button and the downloader closed.
    I did a search on this error code (c0000005) and there seems to be a workaround but no solutions, why is this? I ask that because this problem seems to be years and years old, going back to at least 2005 (do the math that is 10 years).
    I don't even have the Camera hooked up and I get this error on download.  I redownloaded everything and reinstalled.  I allso saw the AVI issues reported with this proble so i updated Quicktime though without the camera being hooked up when I get this error I didn't expect that to work.  I tried support and they wouldn't help because I bought it in March this year.  Pretty frustrating as I have re-purchased Elements about every 2 years.  I think I might need a new CODEC?   I had this problem on an Earlier version And I seem to remember that being the Fix but this may be something completely different

    I finally found that it was missing a picture so the Catalog was "corrupted".  I just deleted the picture and it started working.
    I hate Adobe and their total lack of support - thanks for nothing Adobe .  Also get this - they offered me to upgrade to 13.0 ( My 12.0 is only 6 months old  but they still don't support it on errors.  Only install errors!
    I have upgrade and repurchase this product 4 times now.  I will find something else next time!

  • Adobe Reader 8.0 has encountered a problem and needs to close. We are sorry for the inconvenience

    Ver 8 installed fine but can't get it to launch from any application. Have tried going back to earlier versions (6.1,6.2,7) but the same problem occurs.
    Same error message each time:
    "Adobe Reader 8.0 has encountered a problem and needs to close. We are sorry for the inconvenience"
    AppName: acrord32.exe AppVer: 8.0.0.456 ModName: acrord32.dll
    ModVer: 8.0.0.456 Offset: 00020916
    Tried every troubleshooting tip in the Support Knowledgebase to no avail.
    Have been using Reader for years with never any problems and now I can't seem to get this fixed after numerous hours.
    Any suggestions would be appreciated. Is there a free support line I can call or is it paid support only?
    Thanks,
    Dee

    Like others my problem was Adobe Reader 8.1.2 died terribly and with a buggy stench with the following error:
    AppName: acrord32.exe AppVer: 8.1.0.137 ModName: msvcr70.dll
    ModVer: 7.0.9466.0 Offset: 000013d6
    RESOLUTION ON XP SP2
    1. Control Panel, Users
    2. Create a new user account NewUser (for example)
    3. Start, Log Off
    4. Switch Users to the NewUser
    5. Wait the mini eternity for new user to be set up.
    6. Start Adobe Acrobat 8.1.2 and you will see a red splash screen along with some license updating things.
    7. Adobe 8.1.2 now starts fine under NewUser
    8. Switch back to your regular user name. Start, Log off, Switch Users
    Now a note to Adobe. Do you folks really have to make this such a frickin pain to get working? Do you at Acrobat have any idea of how much time we users blow and how much of our lives pass by while we try to re-download and work with this product? You are directly responsible for a small slow down in the world economy by this. Get the hint.... create an 8.1.3 that omits the secret code steps above.
    The only thing that kept my sanity during this were nice songs on channel 86 on SIRIUS. Thank you SIRIUS.
    Thanks,
    Jim

  • Firefox.exe has encountered a problem and needs to close. We are sorry for the inconvenience. I have been using firefox for years. I installed the latest version of Firefox. It worked fine for several days. Now I get the above message each time I try to s

    firefox.exe has encountered a problem and needs to close. We are sorry for the inconvenience.
    I have been using firefox for years. I installed the latest version of Firefox. It worked fine for several days. Now I get the above message each time I try to start Firefox, even in safe mode. i have checked with latest antivirus softwere also.. i didn't find any thing suspicious.
    == This happened ==
    Every time Firefox opened
    == after loading firefox 3.6.6 ==
    == User Agent ==
    Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US) AppleWebKit/533.4 (KHTML, like Gecko) Chrome/5.0.375.99 Safari/533.4

    I was having this problem few days ago,and I have fixed.Try this steps-If you have AVG antivirus so go on firefox>Tools>Add On and Disable AVG safe search and AVG tool bars too.Then restart computer.

  • "iTunes has encountered a problem and needs to close. We are sorry for the inconvenience."

    please... help. i can't to sync my tones to my ip5s. i don't know why....
    "iTunes has encountered a problem and needs to close. We are sorry for the inconvenience."
    "Please tell Microsoft about this problem."
    And bla bla bla... Already send error report, but everytime i want to sync tone to my phone that toolbox will appear.
    So frustrated.
    So please help me....T____T

    hi David!
    okay, it's time to check if you have a weird registry problem. (the problem i'm thinking about produces the same error message.)
    we diagnose that by creating a new user account (with full administrative privileges). you can do that in your "user accounts" control panel. there's help documentation on it to the left of the screen. while you're in there, also switch off "fast user switching" in your logging-on preferences.
    now log on to the new user account. can you successfully launch itunes from inside there?
    keep us posted on your progress.
    love, b

  • "iTunes has encountered a problem and needs to close. We are sorry for the

    HI all
    I've got know this problem:
    ""iTunes has encountered a problem and needs to close. We are sorry for the inconvenience." With the option to send error report or don't send.
    and the error signature is:AppName: itunes.exe AppVer: 7.0.2.16 ModName: unknown
    ModVer: 0.0.0.0 Offset: 01a21040
    Does anyone know what should i do?
    Thanks
    Wouiners

    I had the same issue. I found a solution under a different thread posted by scubastevee32. It worked for me. I copied pasted his solution below.
    after countless hours of dead ends.... I found this to fix the problem(thank you "b noir")
    hat one could be being caused by a problem with your QuickTime. (itunes uses QuickTime for audio and video playback.)
    so let's try swapping out your QuickTime.
    head into your Add/Remove programs. uninstall QuickTime.
    Next, we’ll manually remove any leftover program files and folders.
    1. On the Start menu, click My Computer (or double-click My Computer on the Desktop).
    2. In My Computer, open Local Disk.
    3. Open Program Files.
    4. Right-click on the QuickTime folder and click Delete from the shortcut menu.
    5. Navigate to C:\Windows\system32\.
    6. Remove the files QuickTime.qts and QuicktimeVR.qtx.
    7. Restart your computer.
    next, we'll get a fresh copy of QuickTime into your PC by doing a repair install of itunes.
    switch off antivirus and antispyware applications prior to the repair install.
    go into Add/Remove and select itunes. click "Change" and then click "Repair".
    if the repair install goes through okay, restart the PC and try launching itunes again. does it launch properly now?
    HP Pavilion   Windows XP Pro  

  • "(program).exe has encountered a problem and needs to close. We are sorry for the inconvenience."

    Hi, I was using Tweetdeck for the past few months without any problems. Recently, the application still works fine.. it opens as normal, all posts I am following appear etc., but when I try to send a tweet the application closes and I get the error
    "tweetdeck.exe has encountered a problem and needs to close. We are sorry for the inconvenience."
    I uninstalled tweetdeck and reinstalled it many times. Sometimes it would work for twenty minutes, other times not at all. I got fed up trying, so uninstalled it and downloaded Seesmic. This new application opened perfectly, all users I am following and their tweets updated perfectly, until again I went to post a tweet and it closes and I get the error
    "seesmic desktop.exe has encountered a problem and needs to close. We are sorry for the inconvenience."
    As these are the only two applications I have used that give me this error, and are also the only two applications I have used that are related to Adobe AIR, I can only assume the problem is connected somehow?
    I was wondering if any of you might have any suggestions on how I could fix this? I am not the most tech saavy guy, so any help would be greatly appreciated as I am starting to lose patience with it!
    Thanks in advance.

    You might try uninstalling the AIR runtime and re-installing it. You might also try contacting the developers of these applications to find out whether the problem is related to issues they already know about.

  • Constantly getting "Syncservicesagent has encountered a problem and needs to close. We are sorry for the inconvenience."

    Hi folks. Running Snow Leopard with Outlook, Word, Safari, iCal and iPhone. Constantly receiving error message: "Syncservicesagent has encountered a problem and needs to close. We are sorry for the inconvenience."
    Any ideas?
    Cheers, Matt.

    Hi - thanks for the detailed reply.
    Yeah it still pops up though I've stopped all the MS applications - Word, Excel, Outlook.
    I Force Quit it in Activity Monitor but it pops back up again, almost immediately. It's like it's running in background, for want of a better term.
    This mean anything to you??
    /Applications/Microsoft Office 2011/Office/SyncServicesAgent.app/Contents/MacOS/SyncServicesAgent
    /Applications/Microsoft Office 2011/Office/mbukernel.framework/Versions/14/mbukernel
    /Applications/Microsoft Office 2011/Office/ObjCOPF.framework/Versions/14/ObjCOPF
    /Applications/Microsoft Office 2011/Office/OPF.framework/Versions/14/OPF
    /Applications/Microsoft Office 2011/Office/OPF.framework/Versions/14/Resources/OPF_Common.dylib
    /Applications/Microsoft Office 2011/Office/mbuinstrument.framework/Versions/14/mbuinstrument
    /Applications/Microsoft Office 2011/Office/mbunamedstrings.framework/Versions/14/mbunamedstrings
    /Applications/Microsoft Office 2011/Office/Netlib.framework/Versions/14/Netlib
    /Applications/Microsoft Office 2011/Office/OutlookCore.framework/Versions/14/OutlookCore
    /Applications/Microsoft Office 2011/Office/merp.framework/Versions/14/merp
    /Applications/Microsoft Office 2011/Office/MicrosoftComponentPlugin.framework/Versions/14/MicrosoftComponentPl ugin
    /Applications/Microsoft Office 2011/Office/MViewLib.framework/Versions/14/MViewLib
    /Applications/Microsoft Office 2011/Office/PowerPlant.framework/Versions/14/PowerPlant
    /Applications/Microsoft Office 2011/Office/PowerPlantCore.framework/Versions/14/PowerPlantCore
    /Applications/Microsoft Office 2011/Office/OutlookRightsFramework.framework/Versions/14/OutlookRightsFramework
    /Applications/Microsoft Office 2011/Office/mbulocale.framework/Versions/14/mbulocale
    /Applications/Microsoft Office 2011/Office/wlmstrings.framework/Versions/14/wlmstrings
    /Applications/Microsoft Office 2011/Office/mbustrings.framework/Versions/14/mbustrings
    /Applications/Microsoft Office 2011/Office/MicrosoftMenuLibrary.framework/Versions/14/MicrosoftMenuLibrary
    /usr/lib/libcrypto.0.9.7.dylib
    /Applications/Microsoft Office 2011/Office/CocoaUI.framework/Versions/14/CocoaUI
    /Applications/Microsoft Office 2011/Office/CocoaTooltipParser.framework/Versions/14/CocoaTooltipParser
    /Applications/Microsoft Office 2011/Office/WLMKernel.framework/Versions/14/WLMKernel
    /Applications/Microsoft Office 2011/Office/MicrosoftOLE.framework/Versions/14/MicrosoftOLE
    /Applications/Microsoft Office 2011/Office/MicrosoftOfficeDRM.framework/Versions/14/MicrosoftOfficeDRM
    /Applications/Microsoft Office 2011/Office/MicrosoftOLEAutomation.framework/Versions/14/MicrosoftOLEAutomation
    /Applications/Microsoft Office 2011/Office/WinCrypto.framework/Versions/14/WinCrypto
    /Applications/Microsoft Office 2011/Office/MSXML.framework/Versions/14/MSXML
    /Applications/Microsoft Office 2011/Office/MicrosoftSetupUI.framework/Versions/14/MicrosoftSetupUI
    /Applications/Microsoft Office 2011/Office/StdUrlMoniker.framework/Versions/14/StdUrlMoniker
    /Applications/Microsoft Office 2011/Office/MicrosoftSetupUI.framework/Libraries/mbupgx.dylib
    /private/var/folders/lA/lACtCMJ9FgSq16ec7WQ-OU+++TI/-Caches-/com.apple.IntlDataC ache.le.sbdl
    /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/HIToolbox.fram ework/Versions/A/Resources/HIToolbox.rsrc
    /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/HIToolbox.fram ework/Versions/A/Resources/English.lproj/Localized.rsrc
    /System/Library/Keyboard Layouts/AppleKeyboardLayouts.bundle/Contents/Resources/AppleKeyboardLayouts-L.d at
    /private/var/folders/lA/lACtCMJ9FgSq16ec7WQ-OU+++TI/-Caches-/com.apple.LaunchSer vices-025501.csstore
    /System/Library/PrivateFrameworks/OpenTransport.framework/Versions/A/OpenTranspo rt
    /usr/share/icu/icudt40l.dat
    /usr/lib/dyld
    /private/var/db/dyld/dyld_shared_cache_i386
    /dev/null
    ->0xffffff800d366a70
    ->0xffffff800d366a70
    /private/etc/security/audit_control
    count=1, state=0x2
    /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/HIToolbox.fram ework/Versions/A/Resources/HIToolbox.rsrc
    /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/HIToolbox.fram ework/Versions/A/Resources/English.lproj/Localized.rsrc
    /Applications/Microsoft Office 2011/Office/MicrosoftComponentPlugin.framework/Versions/14/Resources/MicrosoftC omponentPlugin.rsrc
    /Applications/Microsoft Office 2011/Office/MicrosoftComponentPlugin.framework/Versions/14/Resources/en.lproj/L ocalized.rsrc
    ShMemIntCrit143214869
    ShMemExtCrit143214869
    /Applications/Microsoft Office 2011/Office/MSXML.framework/Versions/14/Resources/MSXML.rsrc
    /Applications/Microsoft Office 2011/Office/OutlookCore.framework/Versions/14/Resources/OutlookCore.rsrc
    /Applications/Microsoft Office 2011/Office/OutlookCore.framework/Versions/14/Resources/en.lproj/Localized.rsrc
    /Users/Coogee50/Library/Logs/Sync/syncservices.log
    /private/etc/security/audit_class

Maybe you are looking for