Need to A1000-F Stock Firmware Image

Hi...
I need the Lenovo A1000-F IdeaPad 16G Stock Firmware to reflash it.
please dont say "go to service center or etc" we have no service center in here.
please give me a download link with all stuff need to flash it.
thanls a lot

When we got our first batch of Surface Pro 3s, we could not get them to PXE. We were working with Microsoft to find a solution when by chance, a colleague of mine set one up to update automatically and it was left on the network long enough to download and
install the updates (including the first firmware update.) After the first firmware update was applied, suddenly we were able to PXE the machine, and if we followed the process of manually updating the SP3 first, then we could reproduce the results and were
able to PXE. Thankfully we only ordered 10 i5s.
Since then we have received our first batch of i7s and these seem to not have the same issue. Since they were built later, I'm assuming the firmware is more up to date. That's not to say that we aren't having a significant amount of other issues with the
devices, but at least now (for the most part) we can PXE consistently.

Similar Messages

"The updater does not have a firmware image"

My initial problem was that I suddenly could not copy purchased music from iTunes to my iPod. I tried the suggestion of downloading the iPod Updater. The Updater did indicate that my iPod software, 2.2, "needs update". Upon attempting to install the Updater (by clicking 'Update'), I received the following message: "The Updater does not have a firmware image." I notice that SEVERAL people are having the same problem at this very moment on this message board. I hope someone from Apple notices this fiasco and does something to fix it. Please help. Restoring my iPod is not an option for me. Thanks.

Yes, I've had this problem too. And the iPod has not been updated with any of the tracks I bought since updating to iTunes 5, but iTunes REloaded all the older tracks onto my iPod. Why? Seeing as the upgrade to iTunes 5 was a bit traumatic in itself, I'm not altogether surprised to discover the newer tracks had not been copied: there is obviously some incompatability here somewhere - but goodness knows where.

Restore Stock Firmware of Z10 (Official Release)

Hi, I just got an officially release unit of Z10 from UAE. All was working well. Out of curiosity, I installed an Autoloader and it crippled my cellular radio. I searched the internet and downloaded Autoload-DevAlpha-10.0.10.263.exe and it successfully updated my Z10. Unfortunately, theres a Dev Alpha word from boot up (that's kind of annyoing) not the usual Blackberry Logo with progress bar (rotating the logo). Would you happen to be able to assist me in restoring back my stock firmware? Need your help. Hoping for your prompt and favorable response.

-: DrewRead :-
Can't find an app on Blackberry World yet? Tweet the developer and ask when they will #GetWithBB10 !!
"Like it" if you like it.

WAP321 not accepting firmware image

Hi all, in a building I have 2 cisco wap321, one with software v1.0.2.3 and the other with v1.0.0.3. I wanted to set up a cluster so I decided to upgrade both of them to the latest firmware v1.0.5.3. With the first one I didn't have any issue, but with the last one It seems to not accepting the firmware image, It loads the image and immediately return to "Firmware Upgrade" page as it nothing happened.
I've already tried:
v1.0.0.3 --> v1.0.1.10
v1.0.0.3 --> v1.0.2.3
v1.0.0.3 --> v1.0.5.3
Any Ideas?
Do you need more information?
Many thanks in advance!

Thnaks Saurav, but I've already followed that guide. Also I've tried different browsers.
Is the a way to do it by CLI? Any suggestions?
Many thanks in advance.
Regards,

Hello, i am new to the mac and i need to learn how to re image using an external hard drive

Hello, i am new, like baby fresh new,...lol, to the mac and i need to learn how to re-image using an external hard drive.

How to replace or upgrade a drive in a laptop
Step One: Repair the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
Step Two: Remove the old drive and install the new drive. Place the old drive in an external USB enclosure. You can buy one at OWC who is also a good vendor for drives.
Step Three: Boot from the external drive. Restart the computer and after the chime press and hold down the OPTION key until the boot manager appears. Select the icon for the external drive then click on the downward pointing arrow button.
Step Four: New Hard Drive Preparation
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your new hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
Step Five: Clone the old drive to the new drive
1. Open Disk Utility from the Utilities folder.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Check the box labeled Erase destination.
5. Select the destination volume from the left side list and drag it to the Destination entry field.
6. Select the source volume from the left side list and drag it to the Source entry field.
7. Double-check you got it right, then click on the Restore button.
Destination means the new internal drive. Source means the old external drive.
Step Six: Open the Startup Disk preferences and select the new internal volume. Click on the Restart button. You should boot from the new drive. Eject the external drive and disconnect it from the computer.

I have updated my iphone this evening and is has asked me to connect my phone to itunes, I connected it to a computer with itunes and it says it needs restoring? and all my images etcwill be earsed I need help as I have not backed my iphone up previously

I have updated my iphone this evening and is has asked me to connect my phone to itunes, I connected it to a computer with itunes and it says it needs restoring? and all my images etcwill be earsed I need help as I have not backed my iphone up previously please help?

YOur phone is in recovery mode, any data that was on there is already gone, you will have to restore your phone and use whatever backup you to restore to.

Can't install 9/23/2005 updater-no firmware image? ARGH!!!!

So the story begins...we've supposedly installed the ITunes 5.whatever update. Husband tells me he can no longer put purchased music on IPod, because it's out of date. So I open the IPod Update 9-23-5005 and (I think) install it on the hard drive. Now, I am trying to open it from my utilities folder to complete the update to the Ipod, and it says, "Updater does not have firmware image."
ARGH!!!!!!!
What am I supposed to do? Husband is irate and I want to fix this! Are there bugs in the system? Is it me? Can someone help?

Niel
- Tried this and it does not work. Same issue - will not load new songs to my iPod, and cannot get the suggested updater to run.
SOLUTION FOR ME:
After loading ITunes 5.0.1, and then connecting my iPod all of my purchased music was erased.
Got the following message:
"Some of the songs in the iTunes music library were not copied to the iPod "Mcwop's iPod" because your iPod software is too old. Go to www.apple.com/ipod to get the latest software update."
Tried running the 9-23-05 update, and got this message:
"The updater does not have a firmware image."
Instead of running the 9-23-05 updater, I went to Applications>Utilities>iPod Updater, and ran the 6-26-05 update. That brought my iPod software to version 2.3, and all of my purchased AAC songs then loaded back to my iPod.

I need java code to flatten an image

Hy! I need java code to flatten an image/sketch...someone can help me? Thanks to everybody!

http://java.sun.com/developer/technicalArticles/Security/JCE/ ?

MB1B i need to check the stock overview & venodr stock

HI Experts,
i need to send the stock to subcontractor..so PO reference mb1b 541 movement type i m sending the stock..here i want to see the stock overview as well as see the vendor stock also.. if there is any setting or threre to check the stock otherwise any enhancement can fulfil this requirement.

Hi,
Enter movement type 541, PO referenc and on next screen, click on Environment tab, enter only plant, remove storage location , select Stock Overview -> Stock Material , system will show you stock in Plant for all Storage Location as well as Stock lying at Vendors end, else if tyou want to know stock lying at vendor's end , you can run report MBLB (Stock at subcontractor)
Regards,
Vikas

Please help me!--rendering makes the images or video blurry (very pixelated) deteriorates the image Adobe Premier Elements 13 need help! .jpg and mpeg images, but I have never "rendered" before since I got APE 13 about 6 weeks ago. I am desperate for

Please help me!--rendering makes the images or video blurry (very pixelated) deteriorates the image Adobe Premier Elements 13 need help! .jpg and mpeg images, but I have never "rendered" before since I got APE 13 about 6 weeks ago. I am desperate for assistance!

That's going to be a ridiculous waste of money and energy.
First of all, the current ATI drivers don't support multiple GPUs, so at the moment even a single 4870X2 would be only a 'normal' 4870 (which is quite a speed beast already). GFX drivers evolve rapidly, so things might look different next month, but when it comes to Linux and hardware there's one Golden Rule: stay away from the newest stuff and wait for proper support to get coded.
I also wonder what power supply could possibly cope with the differences between idle and full load; that's way beyond 400W. But then, I'm one of those "quiet&green" types where >100W idle is already a bit much.
I kind of understand that you want to get it done and not worry about hardware for the next 10 years or so, but that's simply not how the hardware world works and never did. At least not for the average consumer.

I need to select and upload a image and corresponding url from an external website using file upload control in MVC4. Please help

I need to select and upload a image and corresponding url from an external website using file upload control in MVC4.
Please help
Latheesh K Contact No:+91-9747369936

This forum supports .NET Framework setup.
As your issue appears to have nothing to do with .NET Framework setup, please ask in the MVC forums for best support.
http://forums.asp.net/1146.aspx/1?MVC

I need to cut and select an image to use on another carrier!

I need to cut and select an image to use on another carrier !
I can not remove the background in my selection
I need your help! here is my email [email protected]

This is the only thing I could find but it does not answer my question or even what I was told by the Global Support Rep.
Verizon has confirmed (here and here) they WILL unlock the SIM on the iPhone 4S, allowing for use of local SIM cards while traveling abroad (no word yet on whether this will allow for use on AT&T and T-Mobile.) This is different than the jailbreak unlocking method; SIM unlocking through Verizon is permanent and will not affect your warranty in any way.
1. Meet the following requirements:
* Must be a Verizon Wireless customer.
* The iPhone 4S being unlocked must be active on a Verizon Wireless line of service.
* The line of service must be active at least 60 days.
* The line of service must be in good standing for the past 60 days.
* Only one SIM Unlock per line every 10 months.
If you don't meet one or more of the above requirements, call anyway. You may still get lucky.
2. Insert a foreign SIM into the SIM card slot on the side of your phone (only required to confirm that the unlock is successful.)
3. Call 1-800-711-8300 (Verizon Global Support) and ask the representative for a SIM unlock. Occassionally a representative may not know exactly what you are referring to; make sure you are not transferred to a different department. You are in the right place. Explain that they should have a walkthrough on how to do this, and that it allows for the use of local, non-Verizon SIM cards while traveling abroad.
4. Get confirmation from the rep that the unlock has been applied to your account, then check your phone to make sure it recognizes your SIM and can connect (if successful it will roam on AT&T, assuming you are calling from the USA.) You will NOT see an unlock confirmation in iTunes as that is for a factory-applied unlock only.
5. Enjoy your new unlocked iPhone 4S!

Need free download of hp photo & imaging cd

need free download of hp photo & imaging cd

Hi Stur,
If I understand you correctly, you would like to import your pictures from your printer to your computer. In this document follow the section on 'How do I import and view images on a memory card?' for your Photosmart 7960 printer.
Let me know if you need anymore assistance.
I worked on behalf of HP.

NSS6000 "Firmware Update Error: The firmware image file is corrupt."

Hello All,
I've recently run into a problem trying to update the firmware on our NSS6000 to either 1.20.1 or 1.21.0. We are currently running 1.16-3.
Each time after I click "Upgrade Firmware", the upgrade fails with the same error: "Firmware Update Error: The firmware image file is corrupt. Obtain another copy of the file and try the firmware upgrade again".
I've tried re-downloading the NSS6000_FW_1.20.1.tar.gz and NSS6000_FW_1.21.0.tar.gz several times from multiple PCs, and using multiple browsers. I've tried several combinations of Windows Server 2003R2, Windows Server 2008R2, Windows 7, and Firefox, Chrome, and IE 8/9.
The downloads all appear to be fine, and they all can open/extract with 7-zip without issue. The file sizes are always the same.
No combination of OS/Browser yields a different result on the upgrade attempt either.
I tried renaming NSS6000_FW_1.21.0.tar.gz to NSS6000_fwupgrade_0121.tar.gz to match the convention used in early versions (thinking that the extra "."'s could be the issue) but no luck either.
I was able to successfully re-apply the NSS6000_fwupgrade_0116.tar.gz firmware without any issues at all.
A strange thing I noticed, though, was on the "The system will reboot now. Please close your browser." window, it shows the device as an "NSS2000 2-Bay Gigabit Network Storage System" (please see attached screenshot). I'm chalking that up to a simple reusing-the-same-web-code issue rather than the root of the problem, but thought I should mention that as well.
Has anyone else run into this issue, or have any suggestions for workarounds in order to successfully upgrade the FW on this device? Thanks in advance for any suggestions.

Hi,
Not sure what is going on i haven't see the issue you are having, can you try downloading both images at a different location; instead of behind your router. Also upgrade to .20 and then .21. Im pasting the release notes upgrades step.
When upgrading the firmware from v1.12 to v1.14, v1.12 to v1.20.1, or v1.12 to
v1.21.0 the Configuration GUI displays a "Programming images.." message
for more than 12 minutes (the time it takes to upgrade the firmware is
usually 5 to 10 minutes).
The workaround is to wait at least 15 minutes to complete the upgrade and
then power cycle the NSS by removing the power cord. Do not try and
access the Configuration GUI during this time. (CSCsx17923) When upgrading the firmware from v1.12 to v1.14, v1.12 to v1.20.1, or v1.12 to
v1.21.0 the Configuration GUI displays a "Programming images.." message
for more than 12 minutes (the time it takes to upgrade the firmware is
usually 5 to 10 minutes).
The workaround is to wait at least 15 minutes to complete the upgrade and
then power cycle the NSS by removing the power cord. Do not try and
access the Configuration GUI during this time. (CSCsx17923)
If this don't help you might have to give us a call @ 1-866-606-1866 and open a support case.
Thanks,
Jasbryan
Cisco Support Engineer

Return for Credit - Is there a need to Create Project Stock (MIGO) in this

Return for Credit - Is there a need to Create Project Stock (MIGO) in this process? System allows you to use ME21n (Returns PO) and then go straight to Goods Issue to Supplier (MIGO)

For the most part, though the code doesn't give much hint of this, layout managers can not be re-used across multiple containers, and I'm almost certain GridBayLayout must be used with this principle. Most layout managers implementing LayoutManager2 maintain an internal cache of the components they are responsible for laying out in order to map each component to a constraint, and will attempt to layout all components together without verifying that they have the appropriate parent, hence causing errors that are very difficult to find, in my experience causing the jvm to perform and illegal operation without so much as an exception being thrown.

Need to A1000-F Stock Firmware Image

Similar Messages

Maybe you are looking for